Answer:
Explanation:
You would call the capacity from the primary. At that point execute your own factors to it. When the capacity is in the cell, you can copy and after that paste it into another cell to do a similar capacity for that diverse scope of cells.
You would call the capacity from the primary. At that point execute your own factors to it. When the capacity is in the cell, you can copy and after that paste it into another cell to do a similar capacity for that diverse scope of cells.
What is spreadsheet?
A spreadsheet is a type of computer program used for organizing, calculating, analyzing, and storing data in tabular form. Spreadsheets were created as digital counterparts to traditional paper accounting spreadsheets.
The data entered into a table's cells is what the program uses to run. Each cell may include text, numeric data, or formula results that automatically calculate and display values based on the contents of neighboring cells.
Users of spreadsheets can change any stored value and watch the changes in calculated values. This enables quick investigation of numerous scenarios without the need for manual recalculation, making the spreadsheet helpful for "what-if" study.
Therefore, You would call the capacity from the primary. At that point execute your own factors to it. When the capacity is in the cell, you can copy and after that paste it into another cell to do a similar capacity for that diverse scope of cells.
To learn more about Spreadsheet, refer to the link:
https://brainly.com/question/8284022
#SPJ3
Changing the position of the wing will
Answer:
will cause error in your pc many many many
Answer:
change the center of gravity and neutral point
Explanation:
What is a row of data in a database called?
Field
File
Record
Title
Answer:
record
Explanation:
i took the test and got it right but give brainliest to the person above me
________ were developed to allow computers to communicate using networking standards.
A. Nodes B. Sound cards C. network interface cards
A ______ is an interconnection of computers sharing data and peripherals.
A. Node B. Network C. peripheral
A ______ is any computer or digital device (wired or wireless) using the network to exchange data between other computers.
A. Nodes B. Network C. Analog
Walking the data to someone else is called ______.
A. Network B Sneaker-Net C. peripherals
_______ transformed computing by they providing fast, easy access to messages or data and to other users.
A. Digitals B. Peripherals C. Networks
1.) Network interface cards
2.) Network
3.) Nodes
4.) Sneaker-net
5.) Networks
Answer: Trust the person up top
Explanation:
Name the application pagram used in creating the
document above
Answer:
Excel or Google Sheets
Explanation:
i think it is a or c is it right?
8. It is a computer component that converts AC power to DC power to be used
by the computer system.
Answer:
power supply unit.
A power supply unit (PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies.
Explanation:
I HOPE THIS HELPS
PLZ MARK ME AS BRAINLIEST
THANK U!
describe oxfird cleric
Answer:
Explanation:
The Oxford Cleric, or otherwise just known as the Cleric, is from a series of tales called the Canterbury Tales. He had a rather simple life as a cleric and was more commonly seen as a philosopher. The Cleric was just a student who used all of his money on books instead of on clothes and was considered poor.
Use the drop-down menu to complete the steps for using the Autofill feature. Click the . Click the . Drag the to the desired range. Click the Autofill option you want to use.
Answer:
Cell,fill handle,fill handle
Explanation:
Trust
Answer:
Guy up top is correct, it's Cell, Fill handle, Fill handle, in that order
Explanation:
Your school is hosting a diving contest, and they need a programmer to work on the scoreboard! Your job is to calculate each diver's total after the three judges hold up their individual scores. Write the function calculate_score which takes a tuple of three numbers from 0 to 10 and calculates the sum. A perfect dive is worth 30 points, a belly flop is worth 0. For example: calculate_score((10, 10, 10)) # => 30 calculate_score((9, 9, 6)) # => 24
Answer:
def calculate_score(setss):
num1, num2, num3= setss
if num1 >= 0 and num1 <=10 and num2>= 0 and num2<=10 and num3>= 0 and num3<=10:
print(num1+ num2+num3)
else:
print("Out of range")
Explanation:
I've added the full source code as an attachment, where I used comments as explanation
Type the correct answer in the box. Spell all words correctly.
How is it possible to access data from any location?
Storing data on the _________ enables access from any location.
Answer:
Storing data on the cloud enables access from any location.
Explanation:
Answer:
the answer is cloud becus i get it right
Explanation:
An instrument used to measure the amount of electrical current intensity in a circuit
What is the output?
password = "sdf# 356"
>>> password. isalnum()
The output is False because the string password contains #.
Answer:
The answer is False.
Explanation:
The answer is false becasue it has other characters than letters and numbers.
Have a great day, I hope this helped.
What is one step taken when solving a computer software problem?
Answer:
B. scanning the computer and deleting any viruses
Explanation:
edge 2020
When determining the cost of an item, the seller will often analyze the demand as well as the supply before setting the price of the blank
.
Answer:
The price of a commodity is determined by supply and demand. therefore the answer is COMMODITY. that other person is wrong
Answer: The correct answer is Commodity
Explanation: This answer is confirmed correct.
Commodity pricing is established based on supply and demand.
Meet my horse! ask questions about him too!
Answer:
no answer, just horse
Explanation:
how much does he eat and is his hair soft? jdnfnnan
Answer:
Hi I have a horse too. He is so handsome
what dicapline do you do?
Explanation:
What is the purpose of this diamond shape in a flowchart?
Answer:
To represent a decision making step.
Explanation:
for example, assume that you need to display 'pass' if the total marks are greater than 50 and 'fail' if it's less than 50
Then, after calculating the total, you should draw a diamond and inside it write, 'is total ∠ 50?'
after that you can continue your flowchart taking one decission as 'yes' and the other decission as 'no'
The rectangular shape stands for a task or course of activity. In the flowchart sequence, the diamond shape represents a question or a branch.
What is flowchart?A flowchart is a diagram that shows a process' individual steps in their proper order.
It is a general tool that may be customised for a wide range of uses and used to define a variety of processes, including a project plan, an administrative or service process, or a manufacturing process.
These four typical forms are excellent for outlining organisational structure, how various departments interact, and economic, industrial, or administrative operations.
In a process, a decision point is represented by a diamond. Usually, the statement in the symbol will call for a "yes" or "no" response and, in accordance, branch to other locations in the flowchart.
Thus, this is the main use of diamond symbol in a flowchart.
For more details regarding a flowchart, visit:
https://brainly.com/question/14598590
#SPJ2
My notifications keep glitching and saying i got messages
But they dry
Answer: just reset the phone
Explanation: if it keeps doing that then you have some app that's not supposed to be there
As the senior analyst responsible for data staging, you are responsible for the design of the data staging area. If your data warehouse gets input from several legacy systems on multiple platforms, and also regular feeds from two external sources, how will you organize your data staging area? Describe the data repositories you will have for data staging.
Answer:
The corresponding schemas I use such as given below.
Explanation:
Dim: Used in the design for certain artifacts belonging to measurements. Fact: Used for these artifacts throughout the design relevant to the truth Admin: Used for all configuration-related artifacts that could be open to professional end-users. Audit: That used to hold audit-related particles. Etl: Is used for keeping objects, particularly staging details, directly connected to something like the ETL method. Report: Used to keep objects utilized explicitly for programs for documentation.Olap: Used for keeping objects directly used for systems for study. Test: Used to carry objects which have been used exclusively for research. Useful- Used to carry objects that just about any member including its implementation may typically use.Select the correct answer.
What is the drawback of the linear model?
A. communication is only in one direction
B. too much noise is created
C. no feedback is sent on receiving the message
D. long travel between the sender and the receiver
I NEED this asap
20 points
long travel between the sender and the receiver
Answer:
D. long travel between the sender and the receiver
Explanation:
Which of the following behaviors is considered ethical?
A. copying another user’s password without permission
B. hacking software to test and improve its efficiency
C. using a limited access public computer to watch movies
D. deleting other user’s files from a public computer
Answer:
answer is c. using a limited access public computer to watch movies
Answer:
using a limited access public computer to watch movies
Explanation:
It is the only one that will not get you in big trouble
Use the drop-down menus to complete the steps for using the Scenario command.
1. Select the cells you want to use in your scenario.
2. Go to the ____ tab.
Data
Home
Insert
Formulas
3. In the Forecast group, select _____ and click Scenario Manager.
Sort
Get Data
Forecast Sheet
What-If Analysis
4. Click Add and fill in the name and add comments if you wish.
5. To compare, you will want to create _____ version.
A what-If
A original
A Data Table
6. Add a second scenario, changing the values from the first.
7. Click _____ to view the values in each scenario.
OK
Show
Review
Answer:
1. Select the cells you want to use in your scenario.
2. Go to the Data tab.
3. In the Forecast group, select What-if Analysis and click Scenario Manager.
4. Click Add and fill in the name and add comments if you wish.
5. To compare, you will want to create an original version.
6. Add a second scenario, changing the values from the first.
7. Click show to view the values in each scenario.
I got the answer right on Edge :)
The cells a person want to use are:
Go to the Data tab. In the Forecast group, select What-if Analysis and click Scenario Manager.Click Add and fill in the name and add comments if you wish. To compare, you will want to create an original version.What is cell?A cell is known to be area that is found on a spreadsheet that is known to be the place where the data are said to be entered.
Note that in the case above, The cells a person want to use are:
Go to the Data tab. In the Forecast group, select What-if Analysis and click Scenario Manager.Click Add and fill in the name and add comments if you wish. To compare, you will want to create an original versionLearn more about cells from
https://brainly.com/question/13920046
#SPJ9
Reflect on the questions below.
1.) Why do some people resist help from others?
2.) Is it useful to work separately at some point in time during pair programming?
3.) How is pair programming beneficial?
4.) In pair programming, how can we better work together?
Answer:
Why do some people resist help from others? Because they fear that their ideas might be rejected.
Is it useful to work separately at some point in time during pair programming? Yes, it is helpful because one can do coding while the other one is navigating or doing something else, it allows the pair to work faster and more efficient.
How is pair programming beneficial? It is beneficial because you can cover more stuff with the help of other people that what you would cover by yourself.
In pair programming, how can we better work together? By communicating with each other, discovering our strengths and working on our weaknesses.
Explanation:
Compare the different specialties of video game design in which a video game designer can concentrate.
Answer:
design animators, visual effects, 3d animators
Explanation:
You need both designers and programmers.
Answer:
A game can't be created without both the designer and programmer working closely together from start to finish. Game designers are responsible for the overall creative vision of the game while programmers have the technological know-how to implement the game designers' ideas and bring them to life using computer code.
Explanation:
:)
Which is the civil penalty for COPYRIGHTS violations? Choose the answer. $200-$150,000 fine up to five years in jail Fines and court costs 1 year in jail
Answer: $200-$150,000 fine
Explanation:
I took the Quiz
Which statement best illustrates the relationship between three different
elements of the circular flow of products?
O A. Households pay wages to businesses, which can then set up
product markets.
O B. Product markets offer labor to businesses, which creates jobs for
households.
O C. Businesses create goods for product markets, which sell them
directly to households.
O D. Resource markets sell goods to product markets, which sell the
goods to businesses
Answer:
C
Explanation:
GDP can be represented by the circular flow diagram as a flow of income going in one direction and expenditures on goods, services, and resources going in the opposite direction. In this diagram, households buy goods and services from businesses and businesses buy resources from households.
Find the value of 1/2 of 1/2
Answer:
1/2 of 1/2 is 1/4 or 0.25
Explanation:
Answer:
0.25 or 1/4
Explanation:
because 0.50 is 1/2 so half of 0.50 is 0.25 or 1/4
how does air conditioner work
please short answer please
Why does a bus topology require a terminator
Answer:The purpose of the terminator is to absorb signals so that they do not reflect back down the line
Explanation:
The answer is-
B.) because otherwise the packets will bounce back and forth from end to end repeatedly
Bus topology can be regarded as a kind of topology for a Local Area Network, it is one that has it's nodes connected to a single cable(backbone) and any break in the so called backbone, there will be failure in the entire segment. However a Terminator is usually attached to the end-points of a bus network so that the signal is absorbed by the Terminator and as a result of this the signal will not reflect back down the line. If there is no Terminator there would be bouncing back and forth of packet in an endless loop.It should be noted that a bus topology require a terminator because otherwise the packets will bounce back and forth from end to end repeatedly
what are the software is there ? their uses
Answer:
Computer software is programming code executed on a computer processor. The code can be machine-level code, or code written for an operating system. An operating system is software intended to provide a predictable and dependable layer for other programmers to build other software on, which are known as applications.
Dan works for an automobile company. He has designed a new model of a car based on an older version. Which technology can he use to present the model at a board meeting?
A.
wearable computing
B.
3-D printing
C.
grid computing
D.
screenless display
Answer:
a
Explanation:
i did the test
Answer:
The answer is B (3-D printing)
Explanation: