Emilia is on a swing, as shown below. Positions A,
B, and C are different locations along her swing
path. Assume that the swing has no friction.
Position C is at the same height as positionA.
FAM
Describe the changes in energy as she moves
from point A to B to C

Answer:

✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿

To solve this problem, we can use the formula for heat transfer:

q = mcΔT

where q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the change in temperature.

We know that the mass of the block is 0.35 kg and that its initial temperature is -27.5 ºC. We also know that the mass of water is 0.217 kg and that its initial temperature is 25.0 ºC.

When they come to equilibrium at 16.4 ºC, we can calculate how much heat was transferred from the water to the block:

q = mcΔT q = (0.217 kg)(4186 J/kg ºC)(25.0 ºC - 16.4 ºC) q = 1825 J

This amount of heat was transferred from the water to the block, so we can set it equal to the amount of heat absorbed by the block:

q = mcΔT 1825 J = (0.35 kg)c(16.4 ºC - (-27.5 ºC)) 1825 J = (0.35 kg)c(43.9 ºC) c = 148 J/kg ºC

Therefore, the specific heat capacity of the block is 148 J/kg ºC.

Explanation:

(´▽`ʃ♡ƪ)

✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿

Answer:

When light interacts with glass or any other transparent medium, its behavior depends on the wavelength or frequency of the light. Different types of light, such as gamma rays, X-rays, ultraviolet (UV) rays, visible light, infrared (IR) rays, microwaves, and radio waves, have different wavelengths and frequencies, and thus interact with glass in different ways.

In general, glass is transparent to visible light, allowing it to pass through without significant absorption or scattering. This is why we can see through glass windows or lenses. However, for other types of light, such as gamma rays, X-rays, and UV rays, glass can absorb or scatter them to varying degrees depending on the energy or frequency of the light and the composition of the glass. For example, lead glass or certain types of high-density glass can effectively block or absorb high-energy radiation such as gamma rays and X-rays.

Infrared (IR) rays, which have longer wavelengths than visible light, are also generally transmitted through glass, although some types of glass may absorb or scatter them at specific wavelengths. Microwave and radio waves, which have much longer wavelengths, are also generally transmitted through glass without significant absorption or scattering.

It's important to note that the interaction of light with glass can also depend on other factors, such as the thickness and quality of the glass, as well as the angle at which the light strikes the glass surface. In some cases, glass may exhibit special properties, such as polarization or refraction, which can affect the behavior of light passing through it. Overall, the interaction of different types of light with glass can vary, and it depends on the specific characteristics of the light and the glass material involved.

Explanation:

The value of the charge on each particle is [tex]1.05 x 10^-8 C[/tex].

Coulomb's law is a fundamental principle of electrostatics that describes the interaction between electric charges. It states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. We can use Coulomb's law to solve this problem. Mathematically,

[tex]F = k(q1q2)/r^2[/tex]

where F is the force of attraction or repulsion between the two charged particles,[tex]q1[/tex] and [tex]q2[/tex] are the magnitudes of the charges on the two particles, r is the distance between them, and k is Coulomb's constant, which has a value of [tex]9.0 x 10^9 Nm^2/C^2.[/tex]

In this problem, we know that the charges are equal and the distance between them is 10.0 cm. We also know that the force between them is 0.5 N. Therefore,

[tex]0.5 N = k(q^2)/(0.1 m)^2[/tex]

Solving for q, we get:

[tex]q = \sqrt{[(0.5 N)(0.1 m)^2/k]}[/tex]

[tex]q = \sqrt{(0.5 N)(0.01 m)/(9.0 x 10^9 Nm^2/C^2)}[/tex]

[tex]q = 1.05 x 10^-8 C[/tex]

Therefore, the value of the charge on each particle is [tex]1.05 x 10^-8 C.[/tex]

Learn more about electrostatics here:

https://brainly.com/question/31042490

#SPJ1

The two risk factors that can affect the ability of a child to learn in school is poor parenting and malnutrition.

A risk factor can be defined as any predisposing factor that can expose an individual to harm.

A risk factor that affects a child is an aspect of the child or environment that increases the probability of poor outcomes.

The two risk factors that can affect the ability of a child to learn in school include the following:

Learn more about nutrition here:

https://brainly.com/question/29512118

#SPJ1

a. We can actually see here that the girl have kinetic energy which is respect to the escalator.

b. The kinetic energy does not depend on the chosen reference.

Kinetic energy is a form of energy that an object possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its current velocity. Kinetic energy is a scalar quantity, meaning it only has magnitude and no direction. The formula for calculating kinetic energy is:

KE = 1/2 × m × v²

Where KE is the kinetic energy, m is the mass of the object, and v is its velocity.

The concept of kinetic energy was first introduced by the French mathematician Gaspard-Gustave de Coriolis in 1829. It was later developed by other scientists such as James Prescott Joule and Hermann von Helmholtz.

Learn more about kinetic energy on https://brainly.com/question/8101588

#SPJ1

C. No.

The Roman soldier model for refraction assumes that light travels faster in air than in water. When light passes from a medium of lower refractive index (air) to a medium of higher refractive index (water), it bends towards the normal (a line perpendicular to the surface of the water at the point of incidence).

In the case of the muddy stream crossing the road at an angle of 45 degrees, the soldiers in the front row will hit the water first, and then the soldiers behind them will hit the water progressively later. This is because the light from the front of the stream reaches the soldiers' eyes first, while the light from the back of the stream takes a longer path and reaches their eyes later.

Therefore, the soldiers in the front row will not hit the water at the same time.

Humans would need a breathable environment like that on Earth in the living section of a colony on Venus in order to survive. Nitrogen, oxygen, and trace amounts of other gases, such as carbon dioxide, make up the majority of the atmosphere on Earth.

The clouds are made of sulfuric acid, and the atmosphere is primarily carbon dioxide, the same gas that causes the greenhouse effect on Venus and Earth. And the heated, high-pressure carbon dioxide acts corrosively at the surface.

For instance, compared to Earth, which has 99% nitrogen and oxygen in its atmosphere, Venus and Mars both contain more than 98% carbon dioxide and nitrogen.

To know more about atmosphere visit:-

https://brainly.com/question/885615

#SPJ1

The top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.

The principle of hydrostatics, also known as Pascal's principle, states that when an external pressure is applied to a fluid in a container, that pressure is transmitted uniformly in all directions within the fluid, regardless of the shape or volume of the container. In other words, the pressure applied to a confined fluid will be distributed evenly throughout the fluid and will not change in magnitude at any point within the fluid. This principle is important in a number of applications, such as hydraulic systems, which use fluids to transmit force and pressure from one point to another. It is also used to explain how liquids exert pressure on the walls of their container and how objects can float or sink in fluids.

We can use the principles of hydrostatics to solve this problem. Let's call the height difference between the two water surfaces h. We can assume that the oil completely covers the water on one side of the tube and does not mix with it, so the oil and water form two separate liquid columns with a common interface. Let's call the height difference between the oil and water surfaces on the same side of the tube H.

The pressure at any given point in a fluid depends only on the depth of that point below the surface of the fluid and the density of the fluid. Since the two water columns are at the same height, they experience the same pressure from the atmosphere. Similarly, the two oil columns experience the same pressure from the atmosphere.

Now consider a point on the interface between the oil and water on the same side of the tube. This point is at a depth of h+H below the water surface on the other side of the tube, so the pressure at this point is greater than atmospheric pressure by an amount equal to the product of the density of water, the acceleration due to gravity, and the total depth (h+H):

P = Patm + ρwatergh

where P is the pressure at the interface, Patm is atmospheric pressure, ρwater is the density of water, g is the acceleration due to gravity, and h+H is the total depth.

Similarly, the pressure at this point is less than atmospheric pressure by an amount equal to the product of the density of oil, the acceleration due to gravity, and the depth of the oil column (H):

P = Patm - ρoilgH

Since the interface between the oil and water is at the same pressure, we can equate these two expressions for P:

Patm + ρwatergh = Patm - ρoilgH

Solving for H, we get:

H = h(ρwater/ρoil)

Substituting the given values, we get:

H = 0.6h

Therefore, the top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.

To know more about pressure visit:

https://brainly.com/question/20816077

#SPJ1

The final temperature after adding the ice to the water and calorimeter will be approximately 8.37 ◦C.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance or system. It is a scalar quantity that indicates how hot or cold an object or medium is. Temperature is commonly measured using various scales, such as Celsius (°C), Fahrenheit (°F), and Kelvin (K), which represent different reference points and units of measurement.

Since energy is conserved, we can set Q_ice equal to Q_water+calorimeter:

m_ice * c_ice * ΔT_ice = (m_water + m_calorimeter) * c_water+calorimeter * ΔT_water+calorimeter

27 g * 2090 J/kg ◦C * (T_f + 65) = (525 g + 80 g) * (4186 J/kg ◦C + 387 J/kg ◦C) * (T_f - 25)

Simplifying and solving for T_f:

27 * 2090 * (T_f + 65) = 605 * (T_f - 25)

56130 T_f + 361350 = 605 T_f - 15125

56130 T_f - 605 T_f = -15125 - 361350

-44,970 T_f = -376475

T_f = (-376475) / (-44,970)

T_f ≈ 8.37 ◦C

Learn more about Temperature from the given link

https://brainly.com/question/26866637

#SPJ1

The net force on particle q₁ is 9.22 × 10^-13 N, and it points to the left.

The net force on particle q₁ due to particles q2 and q3 can be found using Coulomb's law.

Coulomb's law states that the force between two charged particles is given as

F= k * (q₁ * q₂) / r^2

Since q₁ and q₂ have the same charge, the force between them is repulsive, i.e., it points to the left. Using Coulomb's law, we can find the magnitude of this force:

F₁₂ = k * (q₁ * q₂) / r₁₂^2

F₁₂ = (9 × 10^9 Nm^2/C^2) * (-2.35 × 10^-6 C)^2 / (0.100 m)^2

F₁₂ = -4.61 × 10^-13 N

Here,  the force between q₁ and q₂ points to the left, and its magnitude is 4.61 × 10^-13 N.

The  force between q₂ and q₃ also points to the left, and its magnitude is given as

F₂₃ = k * (q₂ * q₃) / r₂₃^2

F₂₃ = (9 × 10^9 Nm^2/C^2) * (-2.35 × 10^-6 C)^2 / (0.100 m)^2

F₂₃ = -4.61 × 10^-13 N

Here,  the force between q₂ and q₃ also points to the left, and its magnitude is 4.61 × 10^-13 N.

F_net = -F₁₂ - F₂₃

F_net = -(-4.61 × 10^-13 N) - (-4.61 × 10^-13 N)

F_net = 9.22 × 10^-13 N

Learn more about force at: https://brainly.com/question/12970081

#SPJ1

To resolve the star-planet system at a distance of 4 light-years, a telescope on Earth would need an aperture with a minimum diameter of 55.88 mm.

In optical microscopy, the Rayleigh criterion is frequently used to estimate the resolution of the microscope. The resolution limit imposed by this criterion has long been regarded as a roadblock to using an optical microscope to study biological phenomena at the nanoscale.

We can use the Rayleigh criterion,

θ = 1.22 λ / D

θ = angular resolution

λ = wavelength of light

D = diameter of the telescope's aperture

θ = arctan (r / d)

r = radius of the planet's orbit

d = distance to the star

Now, we use the given values,

r = 149.6×106 km = 149.6×109 m

d = 4 × 9.461×1015 m = 3.7844×1016 m

λ = 550 nm = 550×10-9 m

θ = arctan (r / d)

   =arctan (149.6×109 / 3.7844×1016) = 0.000012 radians

we can use the Rayleigh criterion,

θ = 1.22 λ / D

D = 1.22 λ / θ

D = 1.22 × 550×10-9 / 0.000012

D = 55.88 mm

To know more about the Rayleigh criterion visit:

https://brainly.com/question/19953205

#SPJ1

Answer:

A) P.E = 138.44 J

B) The velocity of swing at bottom, v = 3.33 m/s

C) The work done, W = -138.44 J

Explanation:

Given,

The mass of the child, m = 25 Kg

The length of the swing rope, L = 2.2 m

The angle of the swing to the vertical position, ∅ = 42°

A) The potential energy at the initial position ∅ = 42° is given by the relation

                               P.E = mgh joule

Considering h  = 0 for the vertical position

The h at ∅ = 42° is  h = L (1 - cos∅)

                              P.E = mgL (1 - cos∅)

Substituting the given values in the above equation

                              P.E = 25 x 9.8 x 2.2 (1 - cos42°)

                                     = 138.44 J

The potential energy for the child just as she is released, compared to the potential energy at the bottom of the swing is, P.E = 138.44 J

B) The velocity of the swing at the bottom.

At bottom of the swing the P.E is completely transformed into the K.E

                 ∴                 K.E = P.E

                                    1/2 mv² = 138.44

                                    1/2 x 25 x v² 138.44

                                           v² = 11.0752

                                            v = 3.33 m/s

The velocity of the swing at the bottom is, v = 3.33 m/s

C) The work done by the tension in the rope from initial position to the bottom

            Tension on string, T = Force acting on the swing, F

                           =

                           = - 2.2 x 25 x 9.8 [cos0 - cos 42°]

                           = - 138.44 J

The negative sign in the in energy is that the work done is towards the gravitational force of attraction.

The work done by the tension in the ropes as the child swings from the initial position to the bottom of the swing, W = - 138.44 J

Answer:

Explanation:

The frequency of the waves produced in the glass of water will depend on the frequency of the sound wave produced by the guitar string.

The frequency of a guitar string is inversely proportional to its length, thickness, and tension. Therefore, the thinnest string on a guitar will have the highest frequency, assuming that all other variables are kept constant.

Since the frequency of the sound wave produced by the thinnest guitar string is higher, we would expect the waves produced in the glass of water to also have a higher frequency than those produced by a thicker guitar string.

No, that is not necessarily true. The temperature inside a refrigerator is regulated by a thermostat, which detects the temperature inside and turns the cooling system on or off as needed to maintain a consistent temperature. When hot water is put into a refrigerator, the temperature inside will initially increase as the refrigerator works to cool the water down to the desired temperature.

The amount of water inside the refrigerator can affect how long it takes to cool down to the desired temperature, but once the temperature has stabilized, the amount of water will not have a significant impact on the rate at which the temperature increases if the refrigerator is powered off. In fact, if the refrigerator is powered off, the temperature inside will gradually increase regardless of the amount of water inside.

Answer:A

Explanation:

Isotopes are members of a family of an element that all have the same number of protons but different numbers of neutrons. The number of protons in a nucleus determines the element's atomic number on the Periodic Table.

Answer:

[tex]80\; {\rm m\cdot s^{-1}}[/tex].

Explanation:

The frequency [tex]f[/tex] of a wave is the number of cycles completed in unit time ([tex]1\; {\rm s}[/tex] in this example.) In this question, [tex]f = 40\; {\rm s^{-1}}[/tex] ([tex]1\; {\rm Hz} = 1\; {\rm s^{-1}}[/tex]) means that the wave would complete [tex]40[/tex] cycles in every [tex]1\; {\rm s}[/tex].

The wavelength [tex]\lambda[/tex] of a wave is the distance the wave travels in each cycle. It is given that [tex]\lambda = 2\; {\rm m}[/tex].

The goal is to find the wave speed, which is the distance that this wave travels in unit time ([tex]1\; {\rm s}[/tex].)

In this question, it is given that [tex]\lambda = 2\; {\rm m}[/tex] and [tex]f = 40\; {\rm s^{-1}}[/tex]. Thus, this wave would travel a total of [tex]40\, (2\; {\rm m}) = 80\; {\rm m}[/tex] for the [tex]40[/tex] cycles completed in each unit time of [tex]1\; {\rm s}[/tex] ([tex]\lambda = 2\; {\rm m}[/tex] for each cycle.) The speed of this wave would be [tex]80\; {\rm m\cdot s^{-1}}[/tex].

Formally, the speed [tex]v[/tex] of this wave can be found by multiplying the wavelength [tex]\lambda[/tex] of this wave by its frequency [tex]f[/tex]:

[tex]\begin{aligned}v &= \lambda\, f \\ &= (2\; {\rm m})\, (40\; {\rm s^{-1}) \\ &= 80\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Answer

the wavelength of the wave is approximately 0.333 meters.

Explanation:

To solve this problem, we can use Coulomb's law, which states that the electric force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.

We can then use the electric force to find the electric field at the location of q3 and the initial acceleration of q3.

a) To find the electric field at the location of q3, we can first find the electric force on q3 due to q1 and q2 and then use the definition of the electric field, which is the electric force per unit charge. The electric force on q³ due to q¹ and q² is:

F1 = k x q¹ x q³/ r1²

F2 = k x q² x q³ / r2²

where r¹ and r² are the distances from q¹ and q² to q³, respectively, and k is Coulomb's constant.

Since q³ is equidistant from q¹ and q², we have r¹ = r² = 0.20 m. Substituting the given values, we get:

F1 = (9.0 x 10⁹ N-m²/C²) x (4.0 x 10⁻⁶ C) x (2.0 x 10⁻⁶C) / (0.20 m)² = 1.8 N

F2 = (9.0 x 10⁹ N-m⁻²/C²) x (-6.0 x 10⁻⁶ C) x (2.0 x 10⁻⁶C) / (0.20 m)² = -5.4 N

The negative sign of F2 indicates that the force on q³ due to q² is in the opposite direction to the force due to q¹.

The net electric force on q3 is the vector sum of the forces due to q1 and q2:

Fnet = F1 + F2 = 1.8 N - 5.4 N = -3.6 N

The electric field at the location of q³ is then:

E = Fnet / q³ = (-3.6 N) / (2.0 x 10⁻⁶ C) = -1.8 x 10⁻⁶N/C

The negative sign of the electric field indicates that the field is directed towards q².

b) To find the initial acceleration of q³, we can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:

Fnet = ma

where m is the mass of q³ and a is its initial acceleration.

Substituting the given values, we get:

-3.6 N = (2.0 x 10⁻⁶ kg) x a

Solving for a, we get:

a = -1.8 x 10³ m/s²

The negative sign of the acceleration indicates that it is directed towards q².

c) The direction of the initial acceleration of q³ is towards q².

To know more about acceleration, visit:

https://brainly.com/question/12550364

#SPJ1

The time takes the kid to remain in the air is 0.735 s.

Time is the duration of an events. The s.i unit of time is seconds.

To calculate how long the kid will be in the air, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the time is 0.735 s.

Learn more about time here: https://brainly.com/question/10428039

#SPJ1

Mice that ate sunflower seeds gained an average of 2.1 grams that Raphael can determine from his experiment. Each group is given a different type of feed.

Grams (g) is a unit of measurement for mass in the International System of Units (SI). It is the base unit of mass in the SI, and is defined as being equal to the mass of a physical prototype, which is kept at the International Bureau of Weights and Measures. In practical terms, 1 gram is equal to 0.0352739619 ounces, or 0.00220462262 pounds. Grams are often used to measure the weight of food, medicines, and other small objects.

To learn more about grams

https://brainly.com/question/30337264

#SPJ1

The force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).  

The hydraulic lift works based on Pascal's principle, which states that the pressure applied to a confined fluid is transmitted equally in all directions throughout the fluid.

Assuming there is no loss of energy due to friction or other factors, the force exerted on the small piston will be equal to the force exerted on the large piston. This can be expressed as:

F1/A1 = F2/A2

where F1 is the force exerted on the large piston, A1 is the area of the large piston, F2 is the force exerted on the small piston (which we want to find), and A2 is the area of the small piston.

We can rearrange this equation to solve for F2:

F2 = (F1/A1) x A2

Given that the area of the large piston is 100 cm², we can calculate the force exerted on the large piston by using the weight of the car and the gravitational acceleration:

F1 = m x g = 1800 kg x 9.81 m/s² = 17,658 N

Substituting the values into the equation, we get:

F2 = (17,658 N / 100 cm2) x 15 cm² = 2,649 N

Therefore, the force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).

To know more about Pascal's principles, visit:

https://brainly.com/question/30258629

#SPJ1

The correct equivalent equation from the options provided is:

w = (24.67 - h) / (h + 6)

What is Equivalent Equation?

An equivalent equation is an equation that has the same solution or solutions as the original equation. In other words, if two equations produce the same values for the variables, they are considered equivalent equations.

The equivalent equation for w, based on the given equation and solving for w, is:

w = (148 - 6h) / (h + 6)

To simplify this equation, we can factor out 6 from the numerator:

w = 6(24.67 - h) / (h + 6)

Now we can further simplify by dividing both numerator and denominator by 6:

w = (24.67 - h) / (h + 6)

Learn more about Octane from the given link

https://brainly.com/question/28469125

#SPJ1

Both the object's speed and mass affect how much kinetic energy it contains. Motional energy is produced while the roller coaster descends. The roller coaster's bottom of the track position is where the most kinetic energy is produced. Kinetic energy changes to potential energy when it starts to rise.

For more information on kinetic energy of roller coaster kindly visit to

https://brainly.com/question/3437220

#SPJ1

The mass of Brachiosaurus moves with a momentum of 134,054 kgm/s  and the velocity is 3.9 m/s, which is 34.37 kg.

The momentum is the product of mass and velocity. The momentum is the vector quantity and the unit of momentum is Kgm/s.

Momentum = mass × velocity

 mass    = momentum/velocity

momentum =  134,052 kgm / s

velocity = 3.9 m/s

mass = 134052 / 3.9

         = 34.37 kg

Thus, the mass of Brachiosaurus is 34.37 kg.

To learn more about Momentum :

https://brainly.com/question/30677308

#SPJ1

According to the question the length of the river span of the bridge in meters is 853.3232 m.

Length is a physical quantity that measures the distance between two points. It is one of the fundamental units in the International System of Units (SI). It is usually measured in meters, although it can also be measured in other units such as centimeters, kilometers, feet, yards, miles, and so on.

The length of the river span of the bridge is 2799.0 ft. To convert this length to meters, we need to use a conversion factor. There are 0.3048 meters in one foot, so the conversion factor we will use is 1 ft
= 0.3048 m.

To convert 2799.0 ft to meters, we multiply by the conversion factor:
2799.0 ft * 0.3048 m/ft
= 853.3232 m

Therefore, the length of the river span of the bridge in meters is 853.3232 m.

To learn more about  Length

https://brainly.com/question/20599103

#SPJ1

The researcher did not find strong evidence to support the idea that job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.

It sounds like the researcher conducted an experiment to investigate whether job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.

Based on the information provided, the researcher found that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level.

The factors that play an important role in the hiring process for a job:

(1) Qualifications and experience: Employers typically look for candidates who possess the necessary qualifications and experience for the job. This includes education, training, certifications, and work experience.

(2) Skills and abilities: Employers also consider a candidate's skills and abilities related to the job. These may include technical, interpersonal, communication, and problem-solving skills.

(3) Personal characteristics: Personal characteristics, such as motivation, work ethic, and adaptability, can also play a role in the hiring process. Employers may look for candidates who demonstrate a positive attitude, a willingness to learn, and the ability to work well with others.

(4) Fit with company culture: Companies may also consider whether a candidate fits with their company culture, values, and mission. This can include factors such as teamwork, creativity, and innovation.

Learn more about evaluations here:

https://brainly.com/question/20067491

#SPJ1

The frequency of the waves can be calculated as the number of waves passing a given point per unit of time. In this case, the frequency is:

f = (number of waves) / (time)

f = 12 waves / 45 s

f = 0.267 Hz

The wavelength is the distance between two adjacent wave crests, which is given as 9.0 m in the problem.

The speed of the wave can be calculated using the formula:

v = f × λ

where v is the wave speed, f is the frequency, and λ is the wavelength.

Substituting the values given, we get:

v = 0.267 Hz × 9.0 m

v = 2.40 m/s

Therefore, the speed of the waves is 2.40 m/s (to two significant figures).

Learn more about wave from

https://brainly.com/question/23739080

#SPJ1

C. 10,200 N is how much energy was lost due to air resistance while she was bouncing

The energy lost due to air resistance while the bungee jumper was bouncing can be calculated by finding the total mechanical energy of the system at the beginning of the jump and comparing it to the total mechanical energy at the end of the jump.

At the beginning of the jump, the total mechanical energy is given by:

Ei = mgh

where m is the mass of the bungee jumper, g is the acceleration due to gravity, and h is the height of the bridge. Therefore, at the beginning of the jump:

50 x 30 x 10 - 1/2 x 30^2 x 10

= 15000 - 4500

= 10,200 N

Read more on energy here:https://brainly.com/question/13881533

#SPJ1

Aproximately 1.09 m/s was the locust's first speed.

In engineering mechanics, vectors are used to express values with both a magnitude and a direction. For analysis, vector representations of a variety of engineering quantities—including forces, displacements, velocities, and accelerations—are required.

Δy = vsin(θ)t - 0.5gt²

0 = v*sin(55°)t - 0.5(-9.81 m/s²)*t²

t = 2vsin(55°)/g

Now, we can use the horizontal motion of the locust to find the initial velocity v. The horizontal distance traveled by the locust is given by:

Δx = v*cos(55°)*t

Substituting the expression for t that we just found:

0.750 m = vcos(55°)2vsin(55°)/g

Solving for v:

v = √(0.750 mg/(2sin(55°)*cos(55°)))

v ≈ 1.09 m/s

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

The mass of the remaining ice in the jar is 188 g.

What is Equilibrium?

Equilibrium refers to a state of balance or stability where opposing forces or factors are balanced, resulting in a state of overall stability and no net change. In various contexts, equilibrium can have different meanings and applications.

We can rearrange the equations to solve for the mass of ice remaining (mice):

Qtea = Qice

mtea * ctea * ΔT = mice * cice * ΔT

mice = (mtea * ctea * ΔT) / (cice * ΔT)

Plugging in the given values:

mtea = 188 g

ctea = 4186 J/kg◦ C (specific heat capacity of water)

ΔT = 30.7 - 26.6 = 4.1 ◦C (change in temperature of the tea)

cice = 4186 J/kg◦ C (specific heat capacity of ice)

mice = (188 * 4186 * 4.1) / (4186 * 4.1)

mice = 188 g

Learn more about Equilibrium from the given link

https://brainly.com/question/517289

#SPJ1