Enough of a monoprotic weak acid is dissolved in water to produce a 0.01660.0166 M solution. The pH of the resulting solution is 2.532.53 . Calculate the Ka for the acid.

Answer:

The peaks are registered from tetramethyl silane (TMS)

Explanation:

Tetramethyl silane (TMS) is used as internal reference in proton nmr (H NMR) spectrometry.

Its peak is usually registered at about a 2.0 chemical shift means that the hydrogen atoms which caused that peak need a magnetic field two millionths less than the field needed by TMS to produce resonance. This is not affected by the chemical shift of the sample analysed.

I hope this helped.

Answer:

Lewis acid

Explanation:

In chemistry, a Lewis acid is any chemical specie that accepts a lone pair of electrons while a Lewis base is any chemical specie that donates a lone pair of electrons.

If we look at the formation of PF6^-, the process is as follows;

PF5 + F^- -----> PF6^-

We can see that PF5 accepted a lone pair of electrons from F^- making PF5 a lewis acid according to our definition above.

Hence in the formation of PF6^-, PF5 acts a Lewis acid.

Answer:

H3C—CH3

Explanation:

The strength of a bond is indicated by the value of its bond dissociation energy. Simply put, the bond dissociation energy is the energy required to break the bond.

Carbon forms single, double and triple bonds with itself. As a matter of fact, carbon atoms can link to each other indefinitely. This is known as catenation and has been attributed to the low bond energy of the carbon-carbon single bond.

The bond energy of the carbon-carbon single bond is about 90KJmol-1 while that of carbon-carbon double bond is about 174KJmok-1. The carbon-carbon triple bond has the highest bond dissociation energy of about 230KJmol-1.

Hence, it is easier to break carbon-carbon single bonds than double and triple bonds respectively, hence the answer.

According to the forces of attraction, the molecule which can be easily broken is CH₃-CH₃ as it has a single bond with low dissociation energy as compared to double or triple bonds.

Forces of attraction is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases  as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.Single bonds have least dissociation energy while triple bonds have the maximum  dissociation energy.

Thus,the molecule which can be easily broken is CH₃-CH₃.

Learn more about forces of attraction,here:

https://brainly.com/question/32820512

#SPJ6

Answer:

[tex]m_{air}=0.947g[/tex]

[tex]n_{O_2} =0.00686molO_2[/tex]

Explanation:

Hello,

In this case, we can firstly use the ideal gas equation to compute the total moles of the gaseous mixture (air) with the temperature in Kelvins:

[tex]T=212\°F=100\°C=373.15K\\\\n=\frac{PV}{RT}=\frac{1.00atm*1.00L}{0.082\frac{atm*L}{mol*K}*373.15K}\\ \\n=0.0327mol[/tex]

In such a way, since the molar mass of air is 28.97 g/mol, we can compute the mass of air with a single mass-mole relationship:

[tex]m_{air}=0.0327mol*\frac{28.97g}{1mol} =0.947g[/tex]

Finally, knowing that the 21% of the 0.0327 moles of air is oxygen, its moles turn out:

[tex]n_{O_2}=0.0327mol*\frac{0.21molO_2}{1mol} =0.00686molO_2[/tex]

Best regards.

Answer:

The mass number of the stable daughter product is 208

Explanation:

First thing's first, we have to write out the equation of the reaction. This is given as;

²³²₉₀Th → 6 ⁴₂α  +  4 ⁰₋₁ β + X

In order to obtain the identity of X, we have to obtain it's mass numbers and atomic number.

There is conservation of matter so we expect the mass number to remain the same in both the reactant and products.

Mass Number

Reactant = 232

Product = (6* 4 = 24) + (4 * 0 = 0) + x = 24 + x

since reactant = product

232 = 24 + x

x = 232 - 24 = 208

Atomic Number

Reactant = 90

Product = (6* 2 = 12) + (4 * -1 = -4) + x = 8 + x

since reactant = product

90 = 8 + x

x = 90 - 8 = 82

Answer:

3.00 L

Explanation:

Convert the pressure to Pascals.

P = 82 atm × (101325 Pa/atm)

P = 8,308,650 Pa

Convert temperature to Kelvins.

T = 27°C + 273

T = 300 K

Use ideal gas law:

PV = nRT

(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)

V = 0.00300 m³

If desired, convert to liters.

V = (0.00300 m³) (1000 L/m³)

V = 3.00 L

Answer:

[tex]\large \boxed{\text{3.0 L}}[/tex]

Explanation:

[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]

Answer:

The answer to this question can be defined as follows:

In question 1, the answer is "Option A".

In question 2, the answer is "[tex]\bold{CH_3COOH}[/tex]".

Explanation:

In the second question, there is mistype error in the choices so the correct answer to this question can be defined as follows:

The Average atomic mass of phosphorus is 29.9.

The average atomic mass (sometimes called atomic weight) of an element is the weighted average mass of the atoms in a naturally occurring sample of the element.

Average masses are generally expressed in unified atomic mass units (u), where 1 u is equal to exactly one-twelfth the mass of a neutral atom of carbon-12.

An element can have differing numbers of neutrons in its nucleus, but it always has the same number of protons.

The versions of an element with different neutrons have different masses and are called isotopes.

The average atomic mass for an element is calculated by summing the masses of the element’s isotopes, each multiplied by its natural abundance on Earth i.e,

Average atomic mass of P = ∑(Isotope mass) (its abundance)

∴ Average atomic mass of P = (P-29 mass) (its abundance) + (P-30 mass)(its abundance) + (P-31 mass) (its abundance) + (P-33 mass) (its abundance)

Abundance of isotope = % of the isotope / 100.

∴ Average atomic mass of P = (29)(0.327) + (30)(0.4803) + (31)(0.184) + (33)(0.0087) = 29.88 a.m.u ≅ 29.9 a.m.u.

Hence , The Average atomic mass of phosphorus is 29.9.

Learn more about Average atomic mass here ;

https://brainly.com/question/21025876

#SPJ1

Answer:

The given statement is false.

Explanation:

So that the given is incorrect.

Answer:

They blow away from poles to the equator.

Explanation:

Hello,

In this case, we must take into account that global wind systems are formed by the constant increase in the temperature of the Earth’s surface. Thus, they drive the oceans’ surface currents. In such a way, we can say wind is the basic movement of air from an area of higher pressure to an area of lower pressure, for that reason they blow away from the poles to the equator.

Best regards.

The statement that describes the global winds is they travel over short distances.

Wind is a pattern or type of the movement of the natural air or any other composition of gases over to the relative position of the planet's surface.

Global winds are those winds which can travel in a straight path and originated due to global convention currents. Global winds always move from west to east direction and travels short distances only.

Hence, option (2) is correct.

To know more about global winds, visit the below link:

https://brainly.com/question/1319281

Explanation:

Answer:

This description shows a methyl group.

Explanation:

Answer:

0.900 V

Explanation:

Oxidation half cell;

2Al(s) -----> 2Al^3+(aq) + 6e

Reduction half equation;

3Zn^2+(aq) + 6e ----> 3Zn(s)

E°anode = -1.66V

E°cathode= -0.76 V

E°cell= E°cathode - E°anode

E°cell= -0.76-(-1.66)

E°cell= 0.900 V

Answer:

c iodine

Explanation:

fluorine is a halogen group element like Bromine, Iodine,Astatine,Chloride

Answer:

The reaction given in the question is:  

2CH₃OH (l) + 3O₂ (g) ⇒ 2CO₂ (g) + 4H₂O (g)

The values of ΔH°formation and ΔS° of the reactants and products given in the reaction based on the thermodynamics data is:

ΔH°formation values of CH3OH (l) is -238.4 kJ/mol, CO2(g) is -393.52 kJ/mol, H2O (g) is -241.83 kJ/mol and O2 (g) is 0.  

The S° values of CH3OH (l) is 127.19 J/molK, CO2(g) is 213.79 J/molK, H2O (g) is 188.84 J/moleK, and O2 (g) is 205.15 J/molK.  

Now the values of ΔH° and ΔS° are,  

ΔH°rxn = 2 * ΔH°formation CO2 (g) + 4 * ΔH°formation H2O (g) - 2*ΔH°formation CH3OH (l)

ΔH°rxn = 2 * (-393.52) + 4 (-241.83) -2 * (-238.4)

ΔH°rxn = -1277.56 kJ/mole

ΔS°rxn = 2 * S° CO2 (g) + 4 * S° H2O (g) - 2*S° CH3OH (l) - 3 * S° O2 (g)

ΔS°rxn = 2 * 213.79 + 4 * 188.84 - 2 * 127.19 - 3*205.15

ΔS°rxn = 313.11 J/mole/K

Now the formula for calculating ΔG°rxn is,  

ΔG°rxn = ΔH°rxn - TΔS°rxn

ΔG°rxn = -1277.56 * 1000 J/mole - 298 * 313.11 J/mole

ΔG°rxn = -1370.86 kJ/mol

Answer:

The process of slowly adding one solution to another until the reaction between the two is complete.

Explanation:

When you perform a titration, you are slowly adding one solution of a known concentration called a titrant to a known volume of another solution of an unknown concentration until the reaction reaches neutralization, in which the reaction is no longer taking place. This is often indicated by a color change.

Hope that helps.

Answer:

1. 0.138g of valium would be lethel in the woman

2. 125mg/min is the drip of the patient

Explanation:

1. In a body, an amount of Valium > 1.52mg / kg of body weight would be lethal.

A person that weighs 200lb requires:

200lb × (453.6g / 1lb) × (1kg / 1000g) = 90.72kg (Weight of the woman in kg)

90.72kg × (1.52mg / kg) =

137.9mg ≡

2. The IV contains 1.5g = 1500mg/mL.

If the patient is receiving 5.0mL/h, its rate in mg/h is:

5.0mL/h × (1500mg/mL) = 7500mg/h

Now as 1h = 60min:

7500mg/h × (1h / 60min) =

Answer:

-179.06 kJ

Explanation:

Let's consider the following balanced reaction.

HCl(g) + NaOH(s) ⟶ NaCl(s) + H₂O(l)

We can calculate the standard enthalpy change for the reaction (ΔH°r) using the following expression.

ΔH°r = 1 mol × ΔH°f(NaCl(s)) + 1 mol × ΔH°f(H₂O(l)) - 1 mol × ΔH°f(HCl(g)) - 1 mol × ΔH°f(NaOH(s))

ΔH°r = 1 mol × (-411.15 kJ/mol) + 1 mol × (-285.83 kJ/mol) - 1 mol × (-92.31 kJ/mol) - 1 mol × (-425.61 kJ/mol)

ΔH°r = -179.06 kJ

Answer:

1,4-hexanediamine contains two [tex]-NH_{2}[/tex] functional groups.

Explanation:

1,4-hexanediamine is an organic molecule which contains two [tex]-NH_{2}[/tex] functional groups at C-1 and C-4 position.

The longest carbon chain in 1,4-hexanediamine contains six carbon atoms.

Molecular formula of 1,4-hexanediamine is [tex]C_{6}H_{16}N_{2}[/tex].

1,4-hexanediamine used as a bidentate ligand in organometallic chemistry.

The structure of 1,4-hexanediamine is shown below.

Answer:

3 fluorine atoms will be present

Answer:

3

Explanation:

The chemical formula of aluminum fluoride is AlF3. As you can see, there is a 1:3 ratio of aluminum atoms to fluorine atoms. Therefore, if a molecule of AlF3 has one aluminum atom, you know there must be 3 fluorine atoms present.

If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.

Explanation:

Speed = 2345 ÷ 35 = 67m/s

Answer:

100 g of water: specific heat of water 4.18 J/g°C

Explanation:

To know the correct answer to the question, we shall determine the temperature change in each case.

For 100 g of water:

Mass (M) = 100 g

Specific heat capacity (C) = 4.18 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 100 x 4.18 x ΔT

Divide both side by 100 x 4.18

ΔT = 55000/ (100 x 4.18)

ΔT = 131.6 °C

Therefore the temperature change is 131.6 °C

For 50 g of water:

Mass (M) = 50 g

Specific heat capacity (C) = 4.18 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 50 x 4.18 x ΔT

Divide both side by 50 x 4.18

ΔT = 55000/ (50 x 4.18)

ΔT = 263.2 °C

Therefore the temperature change is 263.2 °C

For 50 g of lead:

Mass (M) = 50 g

Specific heat capacity (C) = 0.128 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 50 x 0.128 x ΔT

Divide both side by 50 x 0.128

ΔT = 55000/ (50 x 0.128)

ΔT = 8593.8 °C

Therefore the temperature change is 8593.8 °C.

For 100 g of iron:

Mass (M) = 100 g

Specific heat capacity (C) = 0.449 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 100 x 0.449 x ΔT

Divide both side by 100 x 0.449

ΔT = 55000/ (100 x 0.449)

ΔT = 1224.9 °C

Therefore the temperature change is 1224.9 °C.

The table below gives the summary of the temperature change of each substance:

Mass >>> Substance >> Temp. Change

100 g >>> Water >>>>>> 131.6 °C

50 g >>>> Water >>>>>> 263.2 °C

50 g >>>> Lead >>>>>>> 8593.8 °C

100 g >>> Iron >>>>>>>> 1224.9 °C

From the table given above we can see that 100 g of water has the smallest temperature change.

Answer:

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰

Explanation:

Before proceeding to write out the electron configuration of Cd2+, we have to obtain the electron configuration of Cadmium (Cd),

Cadmium has an atomic number of 48, this means that a neutral cadmium atom will have a total of  48  electrons surrounding its nucleus.

The electronic configuration of Cadmium is;

Cd: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10

The shorthand notation is given as;

Cd: [Kr] 4d¹⁰5s²

Cd2+ means that it has two less electrons, hence it's electron configuration is given as;

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰

Answer:

a. 1

b. 0.465M NaOH

Explanation:

KHP reacts with NaOH as follows:

KHP + NaOH → KP⁻ + Na⁺ + H₂O

a. Molar ratio represents how many moles of NaOH reacts per mole of KHP. As you can see in the reaction, 1 mole of NaOH reacts with 1 mole of KHP. Molar ratio is:

1/1 = 1

b. With volume and molar concentration of the KHP solution you can find how many moles of KHP were added until equivalence point, thus:

15.5mL = 0.0155L ₓ (0.600 moles KHP / L) = 0.0093 moles of KHP

In equivalence point, moles of NaOH = Moles KHP. That means moles of NaOH titrated are 0.0093 moles NaOH.

The volume of the NaOH solution was 20mL = 0.020L. Molarity of the solution is:

0.0093 moles NaOH / 0.020L =

a. The balanced equation shows a 1:1 molar ratio between NaOH and KHC₈H₄O₄. This means that for every 1 mole of NaOH, we require 1 mole of KHC₈H₄O₄. Therefore, the molar ratio of NaOH:KHC₈H₄O₄ is 1:1.

The balanced equation for the reaction:

NaOH + KHC₈H₄O₄ → NaKC₈H₄O₄ + H₂O

b. Molarity of KHP solution × volume of KHP solution = Molarity of NaOH solution × volume of NaOH solution at the equivalence point

Molarity of KHP solution = 0.600 M

Volume of KHP solution = 15.5 mL = 0.0155 L

Volume of NaOH solution at the equivalence point = 20 mL = 0.0200 L

Molarity of NaOH solution = (Molarity of KHP solution × volume of KHP solution) / volume of NaOH solution at the equivalence point

Molarity of NaOH solution = (0.600 M × 0.0155 L) / 0.0200 L

Molarity of NaOH solution ≈ 0.465 M

To learn more about the balanced equation, follow the link:

https://brainly.com/question/12192253?referrer=searchResults

#SPJ6

Answer:

aldehyde

carbon-1

ketone

carbon-2

Explanation:

Monosaccharides are colorless crystalline solids that are very soluble in water. Moat have a swwet taste. D-Fructose is the sweetest monosaccharide.

In the open chain form, monosaaccharides have a carbonuyl group in one of their chains. If the carbonyl group is in the form of an aldehyde group, the monosaccharide is an aldose; if the carbonyl group is in the form of a ketone group, the monosaccharide is known as a ketose. glucose is an aldose while fructose is a ketose.

In D-glucose, there is an aldehyde functional group, and the carbonyl group is at carbon-1 when looking at the Fischer projection.

In D-fructose, there is a ketone functional group, and the carbonyl group is at carbon-2 when looking at the Fischer projection.

Answer:

The correct answer is option B and D, that is, halogen (chlorine) and hydroxyl.

Explanation:

An artificial sweetener and sugar substitute is sucralose. It is noncaloric as the majority of the sucralose ingested does not get dissociated within the body. The generation of sucralose takes place by the chlorination of sucrose. It is about 300 to 1000 times sweeter in comparison to sucrose.  

The consumption of sucralose is safe for both nondiabetics and diabetics, it is used in various food and beverage components due to non-caloric sweetener characteristics. It does not affect the levels of insulin and does not affect dental health. As it is produced by chlorination of sucrose, thus, the functional groups present in it are a halogen (chlorine) and a hydroxyl.  

Answer:

Its C I hopefully help you

Answer:

2NaOH(s) → Na₂O(s) + H₂O(g)

Hope that helps.

Given that,

Draw the Lewis structure of acetaldehyde (CH₃CHO).

We know that,

The Lewis structure shows the number of electrons around an atom.

According to structure,

We need to find the molecular geometries of the two central atoms

Using molecular geometries

For first central atom,

Number of bond pair = 2

Here, double bond to O count as single bond

The number of lone pair is zero.

The geometry is Trigonal planar.

For second central atom,

Number of bond pair = 4

The number of lone pair is zero.

The geometry is tetrahedral

Hence, The molecular geometries of the two central atoms are trigonal planar and tetrahedral.

(d) is correct option.

The central carbon atoms in acetaldehyde have a tetrahedral geometry and a trigonal planar geometry respectively.

Acetaldehyde has two central carbon atoms. The Lewis structure of acetaldehyde shows the arrangement of electrons around the atoms in the compound. The lone pairs are shown as dots while the bond pairs are represented using a single dash.

The first central carbon atom in acetaldehyde has a tetrahedral geometry while the second central carbon atom in acetaldehyde has a trigonal planar geometry.

Learn more: https://brainly.com/question/7558603

Answer:

0.0913 M

Explanation:

We'll begin by writing the balanced equation for the reaction.

This is given below:

H2C3H2O4 + 2NaOH —> C3H2Na2O4 + 2H2O

From the balanced equation above, we obtained the following:

The mole ratio of the acid (nA) = 1

The mole ratio of the base (nB) = 2

Data obtained from the question include:

Molarity of base, NaOH (Mb) = 0.0990 M

Volume of base, NaOH (Vb) = 20.52 mL

Volume of acid, H2C3H2O4 (Va) = 11.13 mL

Molarity of acid, H2C3H2O4 (Ma) =..?

The molarity of the acid, H2C3H2O4 can be obtained as follow:

MaVa/MbVb = nA/nB

Ma x 11.13 / 0.0990 x 20.52 = 1/2

Cross multiply

Ma x 11.13 x 2 = 0.0990 x 20.52 x 1

Divide both side by 11.13 x 2

Ma = (0.0990 x 20.52)/ (11.13 x 2)

Ma = 0.0913 M

Therefore, the molarity of malonic acid, H2C3H2O4 solution is 0.0913 M