Answer:
helium , krypton,xenon,radon, argon are noble gasses
A large scuba tank with a volume of 18 L is rated for a pressure of 220 bar. The tank is filled at 20 °C and contains enough air to supply 1860 L of air to a diver at a pressure of 2.37 atm (a depth of 45 feet). Was the tank filled to capacity at 20 °C?
Answer:
Yes, at 20 °C the tank was filled to full capacity
Explanation:
Given;
let initial pressure, P₁ = 2.37 atm
let initial volume, V₁ = 1860 L
let final pressure, P₂ = 220 bar = 217.123 atm
let final volume, V₂ = ?
Subject the air volume (1860 L ) at 2.37 atm to the tank rating (220 bar)
Ideal law is given by;
PV = nRT
At a fixed mole and gas temperature, the equation becomes;
P₁V₁ = P₂V₂
V₂ = (P₁V₁) / P₂
V₂ = (2.37 x 1860) / 217.123
V₂ = 20.3 L
After subjecting the air volume to tank rating, the volume of the air at 220 bar is 20.3 L which is greater than tank volume (18 L).
The extra 2.3 L can be assumed to be compressed gas volume due to the given (lower) temperature.
Thus, at 20 °C the tank was filled to full capacity.
What's the valency of sulphur for Na2SO3
Explanation:
What are the two oxidation states of sulphur in sodium thiosulphate ? In thiosulphate, two sulphurs have oxidation state of -2 and +6. (as per suggestions). Sulphur bonded to three oxygen is considered to have +6 (Sulphur A) and other sulphur has -2 (Sulphur B).
distinguish between deliquescence and efflorescence.
Explanation:
Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.
what is a chemical bond? an attractive force between 2 molecules
Answer:
The chemical bond between 2 molecules is called an intermolecular force.
Answer:
Chemical Bond:
Attraction between two atoms results in the formation of a bond which is called a chemical bond.
Inter molecular Forces:
Attractive Force that in between 2 molecules is called Inter molecular Forces. (Inter : Between)
Which of the following is represented by the number of significant figures in a quantity? A) estimation B) precision C) accuracy D) scientific notation
Answer: the answer is B estimation
Explanation:
i just took a test
The one that is represented by the number of significant figures in a quantity is scientific notation. The correct option is D.
What is scientific notation?Scientific notation is a method of expressing numbers that are either too large or too small to be written in decimal form.
In the United Kingdom, it is known as scientific form, standard index form, or standard form.
The proper scientific notation format is an x 10b, where an is a number or decimal number with an absolute value greater than or equal to one and less than ten, or 1 |a| 10. b is the power of ten required for scientific notation to be mathematically equivalent to the original number.
Scientific notation is represented by the number of significant figures in a number.
Thus, the correct option is D.
For more details regarding scientific notation, visit:
https://brainly.com/question/18073768
#SPJ2
Which type of graph is best used to show how a measured quantity changes over time?
Box and whisker plot
Line graph
Circle graph
Histogram
Describe how red shifts were used by cosmologists to determine that the universe was expanding. How
is this evidence for the big bang theory?
Explanation:
astronomers have discover that in general the future of a Galaxy is, the more redshift light is this mean that the further away the Galaxy are the faster they are moving this is similar to explosion where the bits moving fastest travel for furthest on the explosion redshift data provides evidence that the universe including space itself is expanding .
Explain this
When a small piece of glowing sodium is placed inside a gas jar filled with chlorine gas, the sodium continues to burn brightly but when the gas is replaced by argon gas, the glowing sodium becomes extinguished.
Answer:
Because Argon is a inert gas
Explanation:
Inert gases don't take place in any experiments
Answer:
Below.
Explanation:
The sodium reacts strongly with the chlorine to form NaCl and the heat of reaction continues the brightness, whereas it does not react with the inert gas argon and soon cools down.
why the filament of bulb has high melting point
Answer:
The filament of a bulb has a high melting point because of the heat generated inside the bulb.
Explanation:
When electricity is concentrating and run through a bulb, it starts to generate heat. Leave it on long enough and it will start to build up a lot of heat. Have you ever tried touching a light bulb when it has been all day? It's scorching to the skin.
Since electricity generates heat, the bulb's filament has to have a high melting point so it doesn't melt, destroy the bulb, and leave you light-less. If the filament has a high melting point, then it is able to withstand heat generated by electricity and provide you light.
The figure shows a graph of Allison’s walk to school. She follows the black vectors to get to her school. Which if the following best describes her walk?
Answer:
Allison walks 5 blocks west and 3 blocks south.
Explanation:
Vectors have both magnitude and direction. The attached figure shows the graph of Allison’s walk to school. She follows the black vectors to get to her school.
The first vector on the horizontal axis points towards west and there are 5 blocks. Initially, she walks 5 blocks in west direction.
The second vector points in the negative vertical axis. It means that she walks 3 block in south direction.
Hence, the correct option is (D) i.e. Allison walks 5 blocks west and 3 blocks south.
how is impure copper refined by electrolysis
Answer:
By giving electricity to copper compound solution.
Explanation:
Electrolysis is one of the major way of refined copper. The copper containing solution has two electrodes.i) positive electrodes called anode. ii) negative electrodes called cathode. When electricity is pass into the copper containing solution electrolysis process is starts and impure copper is formed in anode and pure copper is formed in cathode.
So, We can get pure copper in cathode through electrolysis.
I Hope this will be helpful for you.
If this is helpful for you .Then choose this answer as brainliest answer.
Hope it helps.
If you have any query, feel free to ask.
Which statement describes an electron?
Answer:
The statement that describes an electron is "It has a negative charge and is located in orbitals around the nucleus." Electrons are the smallest of the three particles that make up atoms
Explanation:
Electrons are found in shells or orbitals that surround the nucleus of an atom
Electrons are the sub-atomic particles that carry a negative charge over them. In the atom, the electrons are found in the orbitals or the shells around the nucleus. Thus, option D is correct.
What are electrons?
Electrons are the smallest sub-atomic particle that has been known to carry a negative charge and are found in the orbitals of the atom. The charge carried by an electron is 1.602 x 10⁻¹⁹ coulomb and is small than the proton and neutron.
They revolve around the nucleus in their orbits and exhibit the properties of waves and matter. The number of electrons and protons are the same in a neutral atom which makes the atomic number.
Therefore, the electrons have been known to carry a negative charge that revolves in orbit around the nucleus.
Learn more about electrons here:
https://brainly.com/question/11670765
#SPJ6
Your question is incomplete, but most probably your full question was, Which statement describes an electron?
It has a positive charge and is located in the nucleus. It has a positive charge and is located in orbitals around the nucleus. It has a negative charge and is located in the nucleus. It has a negative charge and is located in orbitals around the nucleusWhat substance does a neutral substance release?
Answer:
Neutral substance is a substance that show no acid or base properties.
Explanation:
Neutral substance is a substances that show no acid or base properties, has an equal number of hydrogen and hydroxyl ions and does not change the color of litmus paper.
Answer:
They release no substance
Explanation:
Since the substance is neutral, nothing will be released from it.
sodium react gently with water ture or false
false,
sodium has a vigorous reaction with water.
This can be observed by putting a piece of sodium in water,
it moves swiftly across the surface of water and reacts violently.
which one of the following electronic configuration represents the element that forms simple ion with a charge of-3? (a)1s^2,2s^2,2p^6,3s^2,3p^1 (b)1s^2,2s^2,2p^6,3s^2,3p^3 (c)1s^2,2s^2,2p^6,3s^2,3p^6,3d^1,4s^2 (d)1s^2,2s^2,2p^6,3s^2,3p^6
Answer:
(b)
Explanation:
The 3s^2, 3p^6 orbitals form -3 charge.
This is the element phosphorous and an example of a -3 ion is in aluminium phosphide, AlP3.
The electronic configuration which represents the element forming a simple ion having with a charge of -3 is; 1s², 2s², 2p⁶, 3s², 3p³. Option B is correct.
In this electronic configuration, the element has a total of 16 electrons. To form a simple ion with a charge of -3, the element needs to gain three electrons. This is achieved by adding three extra electrons to the existing configuration.
When the element gains three electrons, the electron configuration becomes:
1s², 2s², 2p⁶, 3s², 3p⁶
This configuration represents the stable octet configuration, where the element has a complete outer shell with eight electrons. Since the charge is -3, it means the element has gained three extra electrons to achieve a stable configuration.
Therefore, the correct electronic configuration representing the element that forms a simple ion with a charge of -3 is 1s², 2s², 2p⁶, 3s², 3p³
Hence, B. is the correct option.
To know more about electronic configuration here
https://brainly.com/question/29184975
#SPJ2
Which two features of Earth's crust involve tension?
O A. Convergent boundaries
B. Reverse faults
c. Divergent boundaries
O D. Normal faults
Answer:
The correct options are;
C. Divergent plate boundary
D. Normal faults
Explanation:
Tensile stress tends to pull objects part by acting axially upon the object to pull the object on a cross section perpendicular to the objects cross-section
The most common stress in convergent plate boundaries is compression stress
The most common stress in divergent plate boundaries is tensile stress
In the presence of tensile stress, normal faults results in the raising of mountains due to their enormous forces
Therefore, the features of Earth's crust involving tension are divergent plate boundary and normal faults.
Answer:c and d
Explanation:
The mass number of a chromium atom is 52 and it has 24 protons. How many neutrons does this atom have? 24 28 76 80
The number of protons and neutrons together makes the total atomic mass of the element. The atom of chromium has 28 neutrons. Thus, option b is correct.
What is an atomic mass?An atomic mass is the property of an element that defines the number of protons and neutrons of the atom placed in a periodic table. The atomic mass is represented at the lower half of the atomic symbol.
The atomic mass is the sum of the neutrons and the protons that are held together in the nucleus of the atom as a concentrated mass. The atomic number is given as,
Atomic number = number of protons + number of neutrons
Given,
The atomic mass of chromium = 52
Number of protons = 24
Substituting values above:
52 = 24 + number of neutrons
number of neutrons = 52-24
= 28
Therefore, the number of neutrons of a chromium atom is 28.
Learn more about atomic mass here:
https://brainly.com/question/17067547
#SPJ6
Answer: option b, 28
Which sequence represents the relationship between temperature and volume as explained by the kinetic-molecular
theory?
higher temperature - more kinetic energy - more space between particles - higher volume
higher temperature-less kinetic energy less space between particles - higher volume
higher temperature → more kinetic energy less space between particles > lower volume
higher temperature-less kinetic energy → more space between particles lower volume
3
and wit
Answer:
A.
Explanation:
Higher temperature - more kinetic energy - more space between particles - higher volume.
An ionic bond is the attraction between _____.
Answer:
oppositely charged ions in a chemical compound
Explanation:
Answer:
Between ions
Explanation:
Smaller particles in an atom are called ____________.
Answer:
[tex]\large \boxed{\sf subatomic \ particles}[/tex]
Explanation:
The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.
12. Classify the following as conduction, convection or radiation. a. A steel mug kept near a stove becomes hot after some time. b. The metal handlebars of a bicycle are colder than plastic hand grips. c. Some people get sunburn when they go out in the sun for a long time. d. The paper kept above a candle flame starts burning after some time.
A - convection
B - conduction
C - radiation
D - convection
If the pH of a weak acid solution is 2.500 and the solution has a concentration of 0.100M, what is the Ka of the weak acid HA?
Answer:
The Kₐ of the weak acid is 1.033×10⁻⁴
Explanation:
The dissociation of a weak acid in aqueous solution is limited to about 5 to 10%
The acid dissociation reaction is given as follows;
HA (aq) + H₂O (l) → H₃O⁺(aq) + A⁻ (aq)
Given that the pH = 2.5, we have
pH = -log₁₀[H₃O⁺] = 2.5
∴ [H₃O⁺] = 10^(-2.5) = 0.0031623
[tex]K_a = \dfrac{[H_3O^+][A^-]}{[HA]}[/tex]
Kₐ = [H₃O⁺][A⁻]/[HA] = (0.0031623^2)/(0.1 - 0.0031623) = 1.033×10⁻⁴
The acid dissociation constant, Kₐ for weak acid is very low as obtained
What is the electron configuration of chlorine (Cl)?
1s22s22p63s23p3
1s22s22p63s23p5
1s22s22p63s24s23p3
1s22s22p63s23p23d3
Answer:
b) 1s22s22p63s23p5
Explanation:
Answer:
b) 1s22s22p63s23p5
Explanation:
edge 2021
Indicators change color when an acid and a base are mixed together. The change in color most likely indicates that a chemical change has occured. a physical change has occured. a new acid has been produced. a new base has been produced.
Answer:
a chemical change
Explanation:
a physical change is mostly identified even without indicators i.e candle wax about forming a new acid or base I guess we have to include a ph scale to ascertain since the salt can be acidic but not necessarily an acid
Answer: The answer is A, a chemical change has occurred
Explanation:
I’m just a jenious
What is the oxidation number of carbon in CO2
Answer: Since oxygen is in group 6 on the periodic table, its valency is
2 −
and hence so is its oxidation number.
But there are 2 oxygen atoms for each carbon atom so the total negative charge due the oxygen is
4 −
But since a molecule must have a net charge of zero in the free form, it implies that the oxidation number of the carbon atom must then be
+ 4
What evidence suggests that global climate change is causing the oceans to get warmer?
Answer:
A large point of evidence in this would be the rate of increase in how fast the polar ice caps are melting and the ocean is rising as a result. As the climate is getting warmer so are the oceans and this is causing the ice caps which are in the ocean.
Explanation:
What is meant by 1m length
Answer:
The metre is defined as the length of the path travelled by light in a vacuum in 1/299 792 458 of a second.
A scuba diver’s air tank contains oxygen, helium, and nitrogen at a total pressure of 205 atmospheres. The partial pressure of nitrogen is 143 atmospheres, and the partial pressure of helium is 41 atmospheres. What is the partial pressure of oxygen in the tank?
answer is 20
explanation: total Pressure = 205
partial pressure of N = 143
partial pressure of He = 41
total pressure = partial pressure of N + partial pressure of O + partial pressure of He
partial pressure of O = 205 - 185 = 20
Answer:
20
Explanation:
Which Group has different numbers of valence electrons?
A. Alkaline earth metals
B. Alkali metals
C. Transition metals
D. Halogens
Answer:
[tex]c. \: transition \: metals[/tex]Transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned. Therefore option C is correct.
Transition metals (Group 3-12) have varying numbers of valence electrons. This is because their valence electrons are located in more than one energy level or subshell.
The number of valence electrons for transition metals can range from 1 to 12, depending on the specific element within the group. The varying numbers of valence electrons in transition metals contribute to their diverse chemical properties and ability to form multiple oxidation states.
Therefore, transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned.
Know more about transition metals:
https://brainly.com/question/29828769
#SPJ2
HELP ME OUT PLZ Today is the deadline
Answer:
Option (1)
Explanation:
When two or more substances are chemically combined in a fixed proportion of mass, substance formed is a compound.
Properties of a compound are different from the properties of the elements from which the compound is formed.
If Magnesium (Mg) is burned in the presence of Oxygen (O₂), Magnesium oxide (MgO) is formed.
Properties of MgO are different from Mg and O₂ because MgO is a COMPOUND.
Option (1) will be the answer.