Answer:
Newton's First Law...
Explanation:
The only force that acts on the car is the sudden deceleration from v to 0 velocity in a brief period of time, due to the collision with another object. However, when viewing the total system, the collision in the situation with two cars releases twice as much energy as the collision with a wall
How do the elements in each group differ? How are they similar?
Explanation:
All the elements in one group have the same number of valence electrons. The valence electrons are those on the energy level the most distant from the nucleus. These valence electrons are those involved in bonding with other atoms to form compounds.
In the periodic table elements in the same group posses similar physical and chemical property and this is due to the similarity in the number of valence electrons found in their valence shells.
While in the periodic table as we move down a group the atomic number of the elements will continue to increase because elements in the same group are located in different periods as well.
Hence we can conclude that the difference in the elements located in a group is that they have different atomic numbers while the similarities is that the posses the same number of valence electrons.
Learn more : https://brainly.com/question/21938331
What type of particles move to create electricity
Again for the subject there was no sentence
Answer:
Electrons
Explanation:
Water has a higher boiling point than expected because what?
Answer:
Water has strong hydrogen bonds between molecules. These bonds require a lot of energy before they will break. This leads to water having a higher boiling point than if there were only weaker dipole-dipole forces. Water also has a high specific heat.
Explanation:
Hope this helped it is what I could find!
Answer: Water has a higher boiling point than expected because hydrogen and oxygen form single covalent bonds. Molecules of water is bound together by strong attractions which needs high energy to break resulting to a higher boiling point of water than most substances.
Explanation: Water has strong hydrogen bonds between molecules. These bonds require a lot of energy before they will break. This leads to water having a higher boiling point than if there were only weaker dipole-dipole forces. Water also has a high specific heat.
In animals. energy is produced by the:
A. endoplasmic reticulum
B. nucleus
C. mitochondria
D. chloroplast
New account if u added my account antonio716 this my new account new friends
how did u even find me again i wanna see if people are
me with a wey some one made
Answer:ok
Explanation:
A mole is blank objects
Answer:
Well what I found was that this was this answer
Explanation:
A mole is 6.022 x 1023 objects of any kind - atoms, electrons, molecules, cars, people, etc... . It is known as Avogadro's number after the scientist who discovered ... Blah blah I think you get it.
what is a significant figure of 0.502 ?
It is difficult to burn a heap of green leaves but dry leaves catch fire easily.
Explain.
Answer:
i dont really have explaining but see green leaf have some amount of water and chlorophyll so it doesn't get burnt and dry leaves lose water and have no amount of them so they get burnt
HOPe It WiLl HeLp........The value of delta at 25c for the formation of pocl3.
°ΔG rxn = -1108.7
Further explanationMaybe the question is like this
the value of ΔG° at 25 °C for the formation of POCl₃
Reaction
P₂(g)+O₂(g)+3Cl₂(g)⇒2POCl₃(g)
Formula
[tex]\tt ^o\Delta G_{rxn}=^o\Delta G_f~product-^o\Delta G_f~reactants[/tex]
You can find table to find ΔG° at 25 °C(298 K)
°ΔG POCl₃ = -502.5 kJ/mol
°ΔG O₂ and °ΔG Cl₂ = 0
°ΔG P₂ = 103.7 kJ/mol
[tex]\tt ^o\Delta G_{rxn}=2.^o\Delta G~POCl_3-^o\Delta GP_2\\\\^\Delta G_{rxn}=2.(-502.5)-103.7=-1108.7~kJ/mol[/tex]
PLEASE HELP!!!!!
What role do chemical processes play in the operation of the flashlight?
i’ll give brainliest just please help me out with the answers haha thanks <3
Answer:
i dont see tha pic
Explanation:
Which Group 2A element would you expect to be the most reactive?
beryllium (Be)
calcium (Ca)
barium (Ba)
radium (Ra)
Answer:
Calcium
Explanation:
It has the largest atom
Which type(s) of elements bonded to form the solute that would be considered ionic
and which type bonded to form the solute that would be considered covalent? (i.e.
metal with nonmetal, metal with metal, nonmetal with nonmetal)
Answer:
Ionic Bonds are formed from metal to nonmetals. Covalent Bonds usually form from nonmetals.
Explanation:
Please help my teacher is rushing me
What two gases are produced during the electrolysis of water?
Answer:
hydrogen and oxygen.
Explanation:
What’s the definition of renewable energy
Answer:
energy from a source that is not depleted when used, such as wind or solar power.
Explanation:
Explanation:
renewable energy is energy from a source that is not depleted when used such as wind or solar power.
Hope this helps :)
is Sc2S3 polar or non polar or ionic
Answer: Ionic
Explanation:
How is light produced in an atom?
Answer:
light is the result of electrons moving between defined energy levels in an atom called shells.
Explanation:
when something exited an atom like collision with another atom or a chemical reaction, an electron may absorb energy boosting it to a higher level shell.
Why is sublimation such a critical component for the water cycle in cold climates?
Answer:
Sublimation is a critical component for the water cycle in cold climates where water in the solid form or ice is prevalent because sublimation which is the transformation of a solid substance to a liquid without passing through the liquid phase including when ice transforms directly into vapors, readily takes place when the relative humidity is low and the wind is dry, which are conditions that can be found combined mainly in cold climates
Explanation:
What is the frequency of a particular type of electromagnetic
radiation with a wavelength of 5.00 x 10-8 m?|
Answer:
f = 0.6× 10¹⁶ Hz
Explanation:
Given data:
Wavelength of radiation = 5.00 × 10⁻⁸ m
Frequency of radiation = ?
Solution:
Formula:
Speed of light = wavelength × frequency
speed of light = 3 × 10⁸m/s
Now we will put he values in formula.
3 × 10⁸m/s = 5.00 × 10⁻⁸ m × f
f = 3 × 10⁸m/s / 5.00 × 10⁻⁸ m
f = 0.6× 10¹⁶ s⁻¹
s⁻¹ = Hz
f = 0.6× 10¹⁶ Hz
How can the shape of a molecule determine its polarity.
Answer:
Letter D
Explanation:
Which is the more energetic, a red photon or a blue photon? Explain in terms of frequency and wavelength.
Answer:
Shorter waves vibrate at higher frequencies and have higher energies. Red light has a frequency of around 430 terahertz, while blue's frequency is closer to 750 terahertz. Red photons of light carry about 1.8 electron volts (eV) of energy, while each blue photon transmits about 3.1 eV.
Im so sorry if this isnt what you are looking for :(
Happy if it is :3
How could a synthetic material such as Acegram affect society?
Explanation:
Synthetic fiber or synthetic fibre (in British English; see spelling differences) are fibers made by humans through chemical synthesis, as opposed to natural fibers that are directly derived from living organisms. They are the result of extensive research by scientists to improve upon naturally occurring animal and plant fibers. In general, synthetic fibers are created by extruding fiber-forming materials through spinnerets, forming a fiber. These are called synthetic or artificial fibers. Synthetic fibers are created by a process known as polymerization, which involves combining monomers to make a long chain or polymer. The word polymer comes from a Greek prefix "poly" which means "many" and suffix "mer" which means "single units". (Note: each single unit of a polymer is called a monomer). There are two types of polymerization: linear polymerization and cross-linked polymerization.
Synthetic material are madeup of monomers and long chain of monomers are known as polymers. The process is known as polymerization and the synthetic material are turned as microplastic which takes a long period of time to decompose. By this way the synthetic materials are very harmful for the society.
What is synthetic material?Synthetic materials are microplastic pollution and madeup up of polymers which is a long chain of polymers and the process is known as polymerization.
The synthetic materials are often converts into microplastic that takes a long period of time to decompose and they are also responsible for generation of greenhouse gases.The synthetic material which is popularly known is nylon which is very tough to recycle.
Therefore,synthetic material are turned as microplastic which takes a long period of time to decompose. By this way the synthetic materials are very harmful for the society.
Learn more about synthetic material here:
https://brainly.com/question/24357817
#SPJ2
How many molecules are there in 5H20?
A.5
B.7
C.10
D.11
N2 + 3H2 Right arrow. 2NH3 What is the percent yield of NH3 if the reaction of 26.3 g of H2 produces 79.0 g of NH3? Use Percent yield equals StartFraction actual yield over theoretical yield EndFraction times 100..
Answer:
53.4%
Explanation:
N₂ + 3H₂ → 2NH₃
Given that:
26.3 g of H₂ react with N₂ to produce 79.0 g of NH₃
Then:
The number of moles of H₂ = 26.3g of H₂ * (1 mol of H₂/ 2.02g of H₂)
= 13.05 mol of H₂
The number of moles of NH₃ = 13.05 mol of H₂ * ( 2mol of NH₃/ 3 mol of H₂)
= 8.697 mol of NH₃
The mass of NH₃ = 8.697 mol of NH₃ *( 17.04g of NH₃/ 1 mol of NH₃) = 148.1 g of NH₃
The percent yield = actual yield/ theoretical yield * 100%
The percent yield = ( 79.0 g/ 148.1 g )* 100%
The percent yield ≅ 53.4 %
Answer:
53.4
Explanation:
The smallest particle of an element that retains the properties of that element is a(n) ____. a. atom c. proton b. electron d. neutron
Answer: proton
Explanation:
They are what give an atom it’s identity
How many days does it take for 16 g of palladium-103 to decay to 1.0 g? The half-life of palladium-103 is 17 days.
Answer: It will take 68 days for the palladium to decay.
Explanation: ima smart dude
54. Copper(I) sulfide is formed when copper and sulfur are
heated together. In this reaction, 127 g of copper reacts
with 41 g of sulfur. After the reaction is complete, 9 g of
sulfur remains unreacted. What is the mass of copper
sulfide formed?
SEL
Ma
Answer:
159g
Explanation:
Copper (I) sulfide is formed by the chemical reaction between copper and sulfur. Copper is a limiting reagent that results in the formation of 190.26 grams of copper(I) sulfide.
What is a limiting reagent?A limiting reagent is defined as the reactant that gets completely utilized in the reaction and affects the amount of the product formation. On the contrary, the excess reagent is present in more amounts.
Given,
Mass of copper = 127 gm
Mass of sulfur = 41 gm
Moles of copper:
n = mass ÷ molar mass
n = 127 ÷ 63.546
n = 1.99
Moles of sulfur:
n = 41 ÷ 32.065
n = 1.27
The reaction is shown as:
Cu + S → CuS
Here, 9 g of sulfur remains unreacted and hence is an excess reagent, and copper being consumed is a limiting reagent.
Here, 1 mole of copper reacts to form 1 mole of copper sulfide hence, 1.99 moles of Cu produces, 1.99 moles of copper sulfide.
Mass of CuS is calculated as:
Mass = moles × molar mass
Mass = 1.99 mol × 95.611 g/mol
= 190.26 grams
Therefore, 127 gm of copper and 41 gm of sulfur produces 190.26 grams of copper sulfide.
Learn more about limiting reagents, here:
https://brainly.com/question/26905271
#SPJ2
NEED ASAP!!!
Sound energy travels by electromagnetic radiation.
True
False
false
Explanation:
..................................................................
what is Bohr's atomic model?
Answer:
The Bohr model and all of its successors describe the properties of atomic electrons in terms of a set of allowed (possible) values. Atoms absorb or emit radiation only when the electrons abruptly jump between allowed, or stationary, states. Direct experimental evidence for the existence of such discrete states was obtained (1914) by the German-born physicists James Franck and Gustav Hertz.
Explanation: