Explanation:
The bonding in Magnesium Bromide is ionic bonding. Ionic bonding occurs between metals and non metals, due to the transfer of electrons.
Strontium Sulphide is also an ionic compound. The metal is Strontium and the non metal is sulphur.
In terms of electrons, it is similar to Magnesium bromide in the sense that the metal lost two electrons and the non metal gained two electrons which is the same as in Magnesium Bromide.
3. What is the name of the technique used to weigh the unknown liquid in part A of the
experiment?
Answer:
The technique is called weighing by difference
What is the result of wave motion on water particles?
A. Water particles barely move forward; they move in a circular pattern.
B. Water particles barely move forward as they move up and down.
C. Water particles are pushed forward as they move up and down.
D. Water particles are pushed down as they move side to side.
Answer:
A. Water particles barely move forward; they move in a circular pattern.
Answer:
For k-12 its:
Explanation:
Water particles barely move forward; they move in a circular pattern.
^^
evaluate {(7.8)^2-(2.2^2
Answer:
56
Hope this helps :)
What is atomic mass unit?
Explanation:
An atomic mass unit is defined as a mass equal to one twelfth the mass of an atom of carbon-12.
Facilitated diffusion moves large molecules through ________.
The diffusion of solutes through transport proteins in the plasma membrane is referred to as facilitated diffusion. Passive transport is a subset of facilitated diffusion. Facilitated diffusion is still passive transport even though it uses transport proteins.
In contrast to passive diffusion, assisted diffusion does not result in the carried molecules dissolving in the phospholipid bilayer. Proteins instead allow the delivered molecules to pass through the membrane without coming into contact with its hydrophobic interior.
Materials move across the plasma membrane with the aid of membrane proteins during facilitated transport, also known as facilitated diffusion.
To know more about Facilitated diffusion, visit;
https://brainly.com/question/14852229
#SPJ6
Mixing hydrochloric acid (HCl) and aqueous calcium hydroxide produces water and aqueous Calcium Chloride. Write the complete and net ionic equations
Answer:
HCI+Ca(OH)2
Explanation:
When sodium chloride and metallic sodium are
each dissolved in water A. both processes are
exothermic B. both processes are endothermic
C. the dissolution of metallic sodium is endothermic
D. the dissolution of metallic sodium is exothermic
E. the dissolution of sodium chloride is explosive
Answer:
B
Explanation:
don't try to do that at home
Suppose that you are performing a titration on a monoprotic acid. Titration of this monoprotic acid required a volume of 0.1L of the base being used. If the same volume of a diprotic acid would instead have been used (same volume of a diprotic acid versus the originally used monoprotic acid), and if we assume furthermore that the concentration of the diprotic acid and the monoprotic acids are equal, how does the volume of base required to reach the endpoint for the diprotic acid compare to the volume of base required to reach the endpoint for the monoprotic acid?
A) More base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid under these conditionsB) Less base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid. C) Exactly the same amount of base is required for both monoprotic and diprotic acids under the situations described here.D) A completely different indicator will need to be used here.
Answer: A) More base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid under these conditions
Explanation:
The monoprotic acid (HA) has a valency of 1 and diprotic acid [tex](H_2A)[/tex] has a valency of 2.
As the concentration and volume of the diprotic acid and the monoprotic acids are equal.
The neutralization reaction for monoprotic acid is:
[tex]HA+BOH\rightarrow BA+H_2O[/tex]
The neutralization reaction for diprotic acid is:
[tex]H_2A+2BOH\rightarrow B_2A+2H_2O[/tex]
Thus more number of moles of base are required for neutralization of diprotic acid and thus the volume required will be more as concentration and volume of the diprotic acid and the monoprotic acids are equal.
Sodium metal reacts with water to produce hydrogen gas according to the following equation:
2Na(s) + 2H2O(l)2NaOH(aq) + H2(g)
The product gas, H2, is collected over water at a temperature of 25 °C and a pressure of 759 mm Hg. If the wet H2 gas formed occupies a volume of 8.11 L, the number of grams of H2 formed is _______g. The vapor pressure of water is 23.8 mm Hg at 25 °C.
Answer:
0.648 g
Explanation:
Step 1: Write the balanced equation
2 Na(s) + 2 H₂O(l) ⇒ 2 NaOH(aq) + H₂(g)
Step 2: Calculate the partial pressure of H₂
The total pressure (P) is equal to the sum of the partial pressures of hydrogen and water vapor.
P = pH₂O + pH₂
pH₂ = P - pH₂O
pH₂ = 759 mmHg - 23.8 mmHg = 735 mmHg
Step 3: Convert "pH₂" to atm
We will use the conversion factor 1 atm = 760 mmHg.
735 mmHg × 1 atm/760 mmHg = 0.967 atm
Step 4: Convert "25°C" to K
We will use the following expression.
K = °C + 273.15 = 25°C + 273.15 = 298 K
Step 5: Calculate the moles of hydrogen (n) formed
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 0.967 atm × 8.11 L/(0.0821 atm.L/mol.K) × 298 K = 0.321 mol
Step 6: Calculate the mass corresponding to 0.321 moles of hydrogen
The molar mass of H₂ is 2.02 g/mol.
0.321 mol × 2.02 g/mol = 0.648 g
Which event is an example of sexual reproduction in plants?
A. Pine trees produce seeds in cones.
B. Mosses form spores in capsules.
C. A kalanchoe produces plantlets on its leaves.
D. A potato has buds that can grow into new stems.
Answer:
the correct answer to your question is b
Guess how many water molecules self-ionize in one liter of water! a) 7 moles b) 1 mole c) 10,000,000 moles d) 0.0000001 moles
Answer:
D)
Explanation:
This seems like a weird question
Water is held together by covalent bonds. The amount of energy required to break these bonds so that water would split into it's respective ions is pretty high. The chances that any one of the molecules floating in 1L of water get enough energy to spontaneously burst into it's ions is slim to none.
So, D) seems like the most likely answer
0.0000001 moles is the number of water molecules self-ionize in one liter of water.
Water ionization occurs when water molecules sepparate this can lead to two different ions:
H+ OH-Water ionization is not very common. Indeed, most water is found as H2O not as ions. However, in a liter of water it is expected 0.0000001 moles ionized or [tex]10^{-7}[/tex].
So, the correct answer is D. because this is the universal logarithm to calculate ionization of water and the concentration of ions.
Learn more in: https://brainly.com/question/3715460
A vaccine used against an infectious disease may contain
Answer:
Vaccines include a variety of ingredients including antigens, stabilizers, adjuvants, antibiotics, and preservatives. They may also contain residual by-products from the production process.
Which of these objects are malleable? Check all that apply
Answer: Options 1,3,6
What is a resistor that can stop most
electric current called?
A. Current
B. Copper wire
C. Conductor
D. Insulator
Answer: a) current
Explanation:
Which change to this process would shift the equilibrium to produce the
maximum possible amount of S03?
2502 +02 2503 + energy
A. Increasing the temperature
B. Decreasing the pressure
C. Removing the O2 as it forms
D. Removing the SO3 as it forms
The change which shift the equilibrium to produce the maximum possible amount of SO₃ is decreasing the temperature.
What is equilibrium principle?According to this principle if any external stress is applied in the equilibrium state then equilibrium will shift towards that side where the external stress will decreases.
In the given chemical equation energy is releases in the form of heat, then in this condition:
Increase in temp will shift the reaction towards the reactant side.Decreasing the pressure will also lead to the decrease in the temperature and in this condition reaction will shift towards product side and will increases the amount of SO₃.Removing the oxygen and SO₃ will not help in increasing the amount of SO₃.Hence decreasing the temperature will produce maximum SO₃.
To know more about equilibrium law, visit the below link:
https://brainly.com/question/13414142
#SPJ2
25.0 mL of a 3.25 M solution is diluted to 450.0 mL. What is the concentration of the diluted solution?
Answer:
0.181 M
Explanation:
Begin by finding the total moles by using the volume and molarity given:
[tex]\frac{3.25 mol}{1000 mL} x \frac{25.0 mL}{1} = 0.08125 mol[/tex]
(Remember molarity is mol/L, which is equal to mol/1000 mL.)
Divide the moles by the volume after dilution:
[tex]\frac{0.08125 mol}{450.0 mL} x \frac{1000 mL}{1 L} = \frac{0.181 mol}{L} = 0.181 M[/tex]
The concentration of the diluted solution is 0.181 M.
Looking across period 4 of the periodic table, potassium (atomic number 19) is followed by calcium (atomic number 20), which is followed by scandium (atomic number 21). Which element should have the largest atomic radius?
Glycerophospholipids (phosphoglycerides) are components of cell membranes.
a. True
b. False
Answer:
The correct answer is a. True
Explanation:
The main components of cell membranes are lipids and proteins. Lipids are responsible to form the structural barrier with the surroundings. The general structure of the membrane is made up of phospholipids, which have a part of the molecule with affinity to other lipids, and another part with affinity to water. The most common and abundant phospholipids are glycerophospholipids.
Therefore, the sentence is true.
"How many grams of CaCl2 would be dissolved in 1.0 L of a 0.10 M solution of CaCl2? "
Answer:
2365 g
Explanation:
The mass of CaCl₂ will be 110.98 grams, this can be calculated by using the molarity formula.
MolarityIt is defined as the ratio of a number of moles of solute to the volume of solution in liters.
It is given by:
M= n/V
What information do we have?
V= 1.0 L
M= 1.0 M
Molar mass of CaCl₂ = 110.98g/mol
To find:
m=?
M= n/V
n= M/V
n= 1 mole
A Number of moles is the ratio of mass over the molar mass.
n = m/ M
1 mole= m / 110.98 g/mol
m= 110.98 grams
Thus, the mass of calcium chloride is 110.98 grams.
Find more information about Molarity here:
brainly.com/question/17138838
i need help with this please
Answer:
owa owa owa owa
Explanation:
owa owa owa owa owa owa owa
I really need help on this question please help
aluminum and hydrochloric acid reaction type
Answer:
redox reaction
Explanation:
:D
Answer:
The reaction between metallic aluminum and hydrochloric acid is what is known as an oxidation-reduction reaction or redox reaction. Both oxidation and reduction take place simultaneously.
True or false atoms are the smallest particle of an element that have that elements properties
Answer:false
Explanation:false
Answer:
true
Explanation:
hoping for the brainliest
The human body is constantly generating new skin (somatic) cells through a process called mitosis (a type of asexual reproduction). Which of the following best describes the outcome of mitosis? ASAPP
Answer:
Wymień różnice między systemem palowym a systemem wiązkowym rośliny
Consider the following reaction:
Mg(s) + 2 HCl (aq) → H2(g) + MgCl2(aq)
If 3.65 mol of magnesium and 3.65 mol of hydrochloric acid are reacted, how many
moles of hydrogen gas are produced?
Answer: 1.825 moles of hydrogen gas are produced.
Explanation:
The balanced chemical equation is:
[tex]Mg(s)+2HCl(aq)\rightarrow H_2(g)+MgCl_2(aq)[/tex]
According to stoichiometry :
2 moles of [tex]HCl[/tex] require = 1 mole of [tex]Mg[/tex]
Thus 3.65 moles of [tex]HCl[/tex] will require=[tex]\frac{1}{2}\times 3.65=1.825moles[/tex] of [tex]Mg[/tex]
Thus [tex]HCl[/tex] is the limiting reagent as it limits the formation of product and [tex]Mg[/tex] is the excess reagent.
As 2 moles of [tex]HCl[/tex] give = 1 mole of [tex]H_2[/tex]
Thus 3.65 moles of [tex]HCl[/tex] give =[tex]\frac{1}{2}\times 3.65=1.825moles[/tex] of [tex]H_2[/tex]
Thus 1.825 moles of hydrogen gas are produced.
Kingsley then adds 44.12 mL of NaOH to 250.00 mL of the HCOOH solution. The neutralization reaction resulted in 0.091 moles of HCOOH and 0.036 moles of HCOO- left in solution. Determine the pH of the resulting solution.
Answer:
pH = 3.34
Explanation:
We can calculate the pH using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[HCOO^-]}{[HCOOH]}[/tex]for HCOOH, pKa = 3.75.
We can calculate [HCOO⁻] and [HCOOH] using the given number of moles for each one and the final volume:
Final Volume = 44.12 mL + 250 mL = 294 mL294 mL / 1000 = 0.294 L[HCOO⁻] = 0.036 mol / 0.294 L = 0.122 M[HCOOH] = 0.091 mol / 0.294 L = 0.310 MThen we proceed to calculate the pH:
pH = 3.75 + log[tex]\frac{0.122}{0.310}[/tex]pH = 3.34The pH of the resulting solution is 3.34.
Calculation of the pH of the solution:Since
Final Volume = 44.12 mL + 250 mL = 294 mL
Now
= 294 mL / 1000
= 0.294 L
Now
[HCOO⁻] = 0.036 mol / 0.294 L = 0.122 M
[HCOOH] = 0.091 mol / 0.294 L = 0.310 M
So, the pH should be
= 3.75 + log0.122/0.310
= 3.34
hence, The pH of the resulting solution is 3.34.
learn more about reaction here: https://brainly.com/question/20874611
What is the skin's natural oil?
a. sweet
b. Melanin
c. sebum
d. vegetable oil
help
Answer:
C. Sebum
Explanation:
C. Sebum
When 149 grams of potassium chloride are decomposed, 78 grams of potassium and an amount of chlorine are released. in what mass ratio are potassium and chlorine released?
Answer:
78 : 71
Explanation:
From the question given above, the following data were obtained:
Mass of KCl = 149 g
Mass of K = 78 g
Mass ratio of K and Cl =?
Next, we shall determine the mass of Cl in the compound. This can be obtained as follow:
Mass of KCl = 149 g
Mass of K = 78 g
Mass of Cl =?
Mass of Cl = (Mass of KCl) – (Mass of K)
Mass of Cl = 149 – 78
Mass of Cl = 71 g
Finally, we shall determine the mass ratio of K and Cl. This can be obtained as follow:
Mass of K = 78 g
Mass of Cl = 71 g
Mass ratio of K and Cl =?
Mass ratio = mass of K / mass of Cl
Mass ratio = 78 / 71
Therefore, potassium, K and chlorine, Cl are released in mass ratio of 78 : 71
Hello! Can someone tell me how fans function and work? And what fans do? Ill include an imagine below! Best answer gets brainliest
Answer:
How fans work....Instead of sucking in hot air and pushing it down, the fan sucks up cool air and pushes it higher. When the fan forces cool air higher, the cool air forces warm air down. Instead of giving you more access to cool air in your room, the fan gives you more access to the warm air, making you feel nice and cozy.
What fans do....A fan, or a breeze, helps by replacing this hot, humid air with cooler, drier air that allows for more evaporation. Similarly, even without sweat, our body loses heat to the surrounding air simply by convection. ... The breeze from the fan carries that hot air away and perpetuates the process, effectively cooling you off.
Explanation:
The Heliocentric model is when the sun, planets, and stars are orbiting a stationary Earth.
True or false