Fill in the blanks in the following statements:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_____light years.
3. The more distant a star, the_____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is_____.
5. The closest stars have parallaxes smaller than______arcsecond.
6. The first successful measurements of stellar parallax were made by______in year______for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is______times______then star Bob.

Answers

Answer 1

Answer:

Explanation:

1. A parsec is defined as the distance from the Sun which would result in a parallax of_TWO____ arcsecond as seen from Earth when observed 6 months apart.

2. One parsecs is about_3.3____light years

3. The more distant a star, the_LESS ____its parallax.

4. The statement "we can measure stellar parallax for most stars in our galaxy" is__TRUE .___.

5. The closest stars have parallaxes smaller than_.002 _____arcsecond.

6. The first successful measurements of stellar parallax were made by_Friedrich Bessel_____in year_1838_____for the star named.

7. Star Fred has parallax four times greater than star Bob. Star Fred is__4____times_nearer_____than star Bob.


Related Questions

a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?

Answers

Answer:

t = 0.051 seconds

Explanation:

Given that,

A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.

The average speed of the skydiver is 174 miles/hour

We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,

[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]

So, a skydiver dive for 0.051 seconds.

Janaki Temple and Pashupatinath Temple are increasing our pride how​

Answers

Answer:

Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.

This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.

Bruno the bat flies at a speed of 0.5 m/s in circle of radius 1 m. What is his acceleration?

Very urgent pls help

Answers

Answer:

Acceleration is 0.25m/s^2

Explanation:

Given the following :

Speed = 0.5m/s

Radius(r) of circle = 1m

Acceleration round a circular path is given as :

a = v^2 / r

Where

a = acceleration of the body

v = speed / velocity

r = radius

Therefore,

a = v^2 / r

a = (0.5)^2 / 1

a = 0.25m/s^2

Question 1 of 10
What is a neutron
A. A particle inside the nucleus that has no charge
B. A positive particle inside the nucleus
O C. A negative particle outside the nucleus
O D. A negative particle inside the nucleus​

Answers

Answer:

The neutron is a subatomic particle, symbol 

n

 or 

n0

, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.

Explanation:

pls mark me as BRAINLIEST

8. You have two iron rods which are identical in appearance, but one is a permanent magnet and the other is unmagnetized. What series of simple experiments can you perform, using only the two rods, which will allow you to determine which of the rods is the permanent magnet

Answers

Answer:

Explanation: Let assume that bars are labeled A and B

Method 1

Using just the identical appearing bar magnet and unmagnetized iron bar.

Place the end of bar A in the middle of bar B.

If bar A sticks to bar B, then bar A is the magnet and bar B the umagnetized iron bar.

If bar A jumps to one of the ends of bar B, then bar B is the magnet.

Reason been that the magnetic field on a bar magnet is greatest at the two poles where the field comes out of the magnet. The center, between the poles, will be the weakest part of the field.

Method 2

Another solution would be to separate the two by quite some distance, float them on a piece of cork/wood in a plastic bucket or suspend them from long strings, then see which one consistently (eventually) lines up tending towards the Earth’s magnetic field.

Please help me with this question ASAP.

In a a potentiometer circuit, a 1m long potentiometer wire PQ of resistance 10 ohms is connected in series with a cells of e.m.f. 9V with internal resistance 3 ohms Calculate:

i The p.d. across PQ
ii. The e.m.f. of a cell which has a balance point of 75cm.​

Answers

Answer:

i. 6.923 V

ii. The e.m.f. = 22.5 V

Explanation:

i. The given parameters are;

Length of potentiometer = 1 m

The resistance of the potentiometer = 10 Ω

The e. m. f. of the attached cell = 9 V

The current, I flowing in the circuit = e. m. f/(Total resistance)

The current, I flowing in the circuit = 9 V/(10 + 3) = 9/13 A

The potential difference, p.d. across the 1 m potentiometer wire = I × Resistance of the potentiometer wire

The p.d. across the potentiometer wire = 9/13×10 = 90/13 = 6.923 V

ii) Given that the 1 m potentiometer wire has a resistance of 10 Ω, 75 cm which is 0.75 m will have an e.m.f. given by the following relation;

[tex]\dfrac{E}{R_{balance}} = \dfrac{V}{R_{cell}}[/tex]

Where:

E = e.m.f. of the balance point cell

[tex]R_{balance}[/tex] = Resistance of 75 cm of potentiometer wire  = 0.75×10 = 7.5 Ω

[tex]R_{cell}[/tex] = Resistance of the cell in the circuit = 3 Ω

V = e.m.f. attached cell = 9 V

[tex]\dfrac{E}{7.5} = \dfrac{9}{3}[/tex]

E = 7.5*3 = 22.5 V

The e.m.f. = 22.5 V

Law of conservation
of momentum

Answers

Answer:

Explanation:

Law of conservation of momentum is applied in solving collision problem. When two body collides, their momentum after collision can be determined using the law.

The law States that the sum of momentum of two bodies before collision is equal to the sum of their momentum after collision. Before collision, both bodies moves with a different velocity while during some cases, the bodies moves with a common velocity after collision.

Whether they move with or without the same velocity depends on the type of collision that exists between them after the collision. After collision, some object sticks together and move with a common velocity while some doesn't.

If the bodies sticks together after collision, the type of collision that occur is inelastic (energy is not conserved) and if they splits after collision, the type of collision that occur is an elastic collision (energy is conserved).

Let m1 and m2 be the masses of the bodies

u1 and u2 be their velocities before collision

v1 and v2 be their velocities after collision.

According to the law;

m1u1 + m2u2 = m1v1 + m2v2

Note that momentum = mass × velocity of the body.

You and a friend are on a swing set and her swing is slightly longer than yours. If you both start swinging at the same time, from the same height, where will she be after you have completed one complete swing back and forth?
a. She will still be at the same height as you.
b. She will be slightly higher than you.
c. She will be slightly lower than you but moving downward away from you.
d. She will be slightly lower than you but moving upward toward you.

Answers

Answer:

d. She will be slightly lower than you but moving upward toward you.

Explanation:

Since your swing is slightly shorter than your friend's swing, then you will have more angular speed than your friend. Angular speed increases with a decrease in radius. The closer the body is to the center, the faster the body swings. By the time you would have completed one complete swing back and forth, your friend will just be moving towards you, and she will be slightly lower than you but moving upwards towards you. This principle is the same reason gymnasts pull their limbs closer to their body when they need to swing faster.

Which of the following statements describes nucleons?
A. Nucleons are the particles that make up a nucleus.
B. Nucleons are the particles in an atom that are neutral.
C. Nucleons are the particles that make up an atom.
D. Nucleons are the particles in an atom that have a charge.

Answers

Answer: nucleons are the particles that make up in nucleus

Explanation:

Nucleons are the particles that make up a nucleus, and they include protons and neutrons.

What are nucleons?

Nucleons are particles that make up nucleus of an atom. They include either proton or neutron, or both found in atomic nucleus.

Generally, nucleons are subatomic particles found within nucleus of an atom.

Therefore, we can conclude that, nucleons are the particles that make up a nucleus.

Learn more about nucleons here: https://brainly.com/question/12582292

#SPJ2

Velocity is a description of an object’s blank

Answers

Change in displacement per unit of time (Ex. 25m/s East)

Velocity is the description of an object's motion from one point to another.

It tells the speed with which the trip is completed, and the direction from the start-point to the end-point.  It tells nothing about any twists, turns, loops, bends, or stops along the way.

Salt compounds are commonly used to melt ice that forms on sidewalks in the winter. A common chemical that is used to melt sidewalk ice is calcium chloride, CaCl2(s). When calcium chloride dissolves into solution is releases thermal energy which aides in melting
the ice.

The molar mass of water is 18.02 g/mol

The thermal energy, in kilojoules (kJ) that must be released from the calcium chloride,
CaCl2(s), to melt 10.0 kg of ice, expressed in scientific notation is a.bc x 104 k).
46
55
The values of a, b, c, and d.

Answers

Answer:

The values of a, b, c and d are

a = 3, b = 3, c = 4 and d = 3

Explanation:

The quantity of heat needed to melt the ice is given by Q = mL where m = mass of ice and L = latent heat of fusion of ice = 334 kJ/kg. This quanity of heat is also the thermal energy needed to be released by the calcium chloride, CaCl₂

Now, the mass of ice = 10 kg. So,

Q = mL

Q = 10 kg × 334 kJ/kg

Q = 3340 kJ

In scientific notation,

Q = 3.34 × 10³ kJ

So the thermal energy needed to be released by the calcium chloride is 3.34 × 10³ kJ

Comparing Q = 3.34 × 10³ kJ with a.bc × [tex]10^{d}[/tex] kJ

So, a = 3, b = 3, c = 4 and d = 3

The values of a, b, c and d are

a = 3, b = 3, c = 4 and d = 3

The mass density of a certain planet is uniform throughout the volume of the planet. If r is the distance from the center of the planet to a point mass inside the planet, the gravitational force on the mass is

Answers

Answer:

F= GMm/r^2

Explanation:

According to newtons formula for gravitation,

F= GMm/r^2

Which statement describes one feature of a closed circuit? Charges do not flow. Bulbs will not shine. The circuit is broken. The circuit is complete.

Answers

I inferred you've referring to a close electrical circuit.

Answer:

The circuit is complete.

Explanation:

A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.

It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.

Answer:

The circuit is complete.

Explanation:

an attempt to estimate the height of a tree the Shadow of an upright metre rule was found to be 25 cm and the length of the Shadow of the tree was 7 m what is the height of the tree​

Answers

Answer:

The actual height of the tree is 28 m

Explanation:

The given information are;

The length of the shadow of an upright meter rule = 25 cm

The actual height of the meter rule = 100 cm

The length of the shadow of the tree = 7 m

The actual  height of the tree  = h

We have

[tex]\dfrac{The \ length \ of \ the \ shadow \ of \ an \ upright \ metre \ rule}{The \ actual \ height \ of \ the \ metre \ rule} = \dfrac{The \ length \ of \ the \ shadow \ of \ the \ tree}{The \ actual \ height \ of \ the \ tree}[/tex]Which gives;

[tex]\dfrac{25 \ cm}{100 \ cm} = \dfrac{7 \ m}{The \ actual \ height \ of \ the \ tree}[/tex]

Therefore;

[tex]The \ actual \ height \ of \ the \ tree = 7 \ m \times \dfrac{100 \ cm}{25\ cm} = 7 \ m \times 4 = 28 \ m[/tex]

That is the actual height of the tree = 28 m.

A sports car moving at constant velocity travels 120m in 5.0s. If it then brakes and comes to a stop in 4.0s,what is the magnitude of it's acceleration? ​

Answers

AnswerQUESTION①):

✔ First calculating the speed :

V = d(in m)/t(in s)

V = 120/5 V = 24 m/s

✔ You now know the average car's speed, is time it takes to stop it completely, so you can calculate its acceleration :

a = V/t

a = -24/4 a = 6 m/s² The car has an acceleration of 6 m/s².

Calculating heat gained, need help!!!

Q=(m)(c)(triangle T)

trial 1:

Q=(0.4)(4.186 J/kg)(78)=?

trial 2:

Q=(0.6)(4.186 J/kg)(78)=?

trial 3:

Q=(0.45)(4.186 J/kg)(75)=?

Answers

Explanation:

q = mCΔT

where m is mass,

C is specific heat capacity,

and ΔT is change in temperature.

Make sure all your units match.  Assuming the substance is water, C = 4186 J/kg/°C.

Trial 1:

q = (0.4 kg) (4186 J/kg/°C) (78°C)

q = 130,600 J

Trial 2:

q = (0.6 kg) (4186 J/kg/°C) (78°C)

q = 195,900 J

Trial 3:

q = (0.45 kg) (4186 J/kg/°C) (75°C)

q = 141,300 J

The density of water is 1000 kg m^3. What is the value expressed in gcm^-3 units? please help me..
(1) 1000 (2) 100 (3) 1 (4) 0.1 (5) 0.01​

Answers

The answer is 1 which is option 3

Here's the neat, cool way to convert units like this:

-- 1 kilogram  =  1,000 grams

-- 1 meter  =  100 centimeters

So . . . . .

(1000 kg/m³) x (1000 g/kg) x (1 m/100 cm)³ =

(1,000 kg/m³) x (1,000 g/kg) x (1 m³/1,000,000 cm³) =

(1,000 x 1,000 x 1 / 1,000,000) (kg-g-m³ / m³-kg-cm³)  =  1 g/cm³

What happens when white light shines through a translucent, red, glass window? a) All colors of light except red are transmitted through the glass. b) Red light is transmitted through and reflected by the glass c) Red light is absorbed by the glass d) all colors except red are reflected by the glass

Answers

Answer:

b. Red light is transmitted through and reflected by the glass

Explanation:

Give me brainliest plz!

All of the wavelengths of the red light are absorbed when it passes through a translucent red glass window, but the red light is transmitted and reflected.

What happens when white light shines through red glass?Red light emerges from the other side of a white light source that has been passed through a red filter. This is so that only red light can pass through the red filter. The spectrum's other colors (wavelengths) are absorbed. Similar to this, a green filter only lets through green light.White light is colorless light that contains all the wavelengths of the visible spectrum. Only specific wavelengths of white light are filtered through transparent or translucent things.Through a colorful glass, white light shines through. Except for the color it is shining through, all light wavelengths are absorbed by the glass.Therefore, if the red light passes through a translucent, red, glass, window, all the wavelengths are absorbed but the red light is transmitted and reflected.

Therefore, the correct answer is option b) Red light is transmitted through and reflected by the glass.

To learn more about light refer to:

https://brainly.com/question/12002703

#SPJ2

Which is the best example of muscular endurance

Answers

Answer:

personally I'd say C by do not know if that is the exact answer

Two men, Joel and Jerry, each pushes an object that are identical on a horizontal frictionless floor starting from rest. Joel and Jerry are using the same force F. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do.

Answers

Answer:

The work done by Joel is greater than the work done by Jerry.

Explanation:

Let suppose that forces are parallel or antiparallel to the direction of motion. Given that Joel and Jerry exert constant forces on the object, the definition of work can be simplified as:

[tex]W = F\cdot \Delta s[/tex]

Where:

[tex]W[/tex] - Work, measured in joules.

[tex]F[/tex] - Force exerted on the object, measured in newtons.

[tex]\Delta s[/tex] - Travelled distance by the object, measured in meters.

During the first 10 minutes, the net work exerted on the object is zero. That is:

[tex]W_{net} = W_{Joel} - W_{Jerry}[/tex]

[tex]W_{net} = F\cdot \Delta s - F\cdot \Delta s[/tex]

[tex]W_{net} = (F-F)\cdot \Delta s[/tex]

[tex]W_{net} = 0\cdot \Delta s[/tex]

[tex]W_{net} = 0\,J[/tex]

In exchange, the net work in the next 5 minutes is the work done by Joel on the object:

[tex]W_{net} = W_{Joel}[/tex]

[tex]W_{net} = F\cdot \Delta s[/tex]

Hence, the work done by Joel is greater than the work done by Jerry.

How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.

Answers

When frequency increases more wave crests pass a fixed point each second. That means the wavelength shortens. So as frequency increases,wavelength decreases

Answer:

they get closer together

Explanation:

Barry walks from one end to the other of a 30-meter long moving walkway at a constant rate in 30 seconds, assisted by the walkway. When he reaches the end, he reverses direction and continue walking with the same speed, but this time it takes him 120 seconds because he is traveling against the direction of the moving walkway. If the walkway were to stop moving, how many seconds would it take Barry to walk from one end of the walkway to the other

Answers

Answer:

Δt=48 s

Explanation:

v: Barry's speed

v.: speed of the walkway

Δx=30 m

Δt1=30 s ,  Δt2=120 s

|Δx1|=|Δx2|

Δx=v*Δt

=> (v+v.)*30=(v-v.)*120

v=v.*5/3

30=(v+v.)*30

=> 30=(5v./3 +v.)*30

v.=3/8 m/s

v=5v./3 , v.=3/8

=> v=5/8 m/s

Δx=v*Δt

30=5/8 *Δt

Δt=48 s

Culture creates the context for behavior in society. true or false

Answers

Answer:

True every culture is diffrent and culture is the way to grow up, the people or things you live around, or the ways of life you follow or dress.

Explanation: The definition of culture is:  means a particular set of customs, morals, codes and traditions from a specific time and place. All of that develops how a person may behave in society.

Answer:

true

Explanation:

just took the quiz

Imagine that your standing on a beach but cannot swim. Your friend encourages you to walk into the surf zone created by incoming deep-water waves that have a wavelength of 30 meters. Would it be safe to walk out to where the waves are breaking? Explain how you arrived at your answer.

Answers

Answer:

It would not be safe to walk out to where waves are breaking due to the effect of rip currents

Explanation:

The water depth in the surf zone is between 5 to 10 meters deep and with a wavelength of 30 meters, the speed of the wave is considerably fast such that control for safety may be difficult

Also the speed of the wave is directly related to the depth of the water which means that where the wave described above is fast as well as the rip current, also the water depth is expected to be considerable for a non swimmer

It is best to seek for sign post regarding safe areas and do not go into the water where there are no lifeguards or marked safe zones.

It won't be safe to walk out to where the waves are breaking.

This is because the wavelength is 30 meters which is a characteristic of

areas with significant water depth in the range of 5-11 meters.Under these

conditions the waves are usually very fast and may get swept with the

current from the water waves when trying to run from it.

It is recommended that we stay in areas where the depth is noted as not

being much and should always seek help and clarity from the life guards so

as to prevent drowning and death.

Read more on https://brainly.com/question/17125479

Three books are at rest, in equilibrium, on a horizontal table as
shown. The weight of each book, which is equal to the force
gravity exerts in the downward direction, is given. What is the
net force on the middle book?​

Answers

Answer:

Net force = 0

Explanation:

Short answer: if the middle book is not acceleration in any direction, the net force is zero.

Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero.  Skills to draw FBD are  essential in solving problems in statics.

Top book exerts -mg (downwards) on the middle book.

Middle book exerts -mg (downwards) on the bottom book.

Total downward force is -mg-mg = -2mg

By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.

This makes the net force of -2mg (downwards) + 2mg (upwards) =0

On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.

What is equilibrium?

Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.

According to the question :

The net force is 0 if the middle book does not accelerate in any direction.

The Middle book is impacted negatively (downwards) by the top book.

The middle book pulls down on the lower book by -mg.

The total downward force is -2mg = (-mg-mg)

According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.

Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.

To get more information about Equilibrium :

https://brainly.com/question/28527601

#SPJ2

A wire carrying a 35.0 A current passes between the poles of a strong magnet such that the wire is perpendicular to the magnet's field, and there is a 2.55 N force on the 3.00 cm of wire in the field. What is the average field strength (in T) between the poles of the magnet

Answers

Answer:

7.65 T

Explanation:

From the question,

Using,

F = BILsinФ......................... Equation 1

Where F = Force, B = magnetic field strength, I = current, L = Length, Ф = Angle.

Make B the subject of the equation

B = F/ILsinФ........................Equation 2

Given: F = 2.55 N, I = 32 A, L = 3.00 cm = 0.03 m, Ф = 90° (perpendicular)

Substitute into equation 2

B = 2.55/(32×0.03×sin90°)

B = 2.55/0.96

B = 7.65 T

A car engine burns gas at 495 K and exhausts to the air at 293 K. What is the highest possible efficiency it could have?
(NO UNIT)

Answers

Answer:

59.19%

Explanation:

Step 1:

Data obtained from the question. This include the following:

Input temperature = 495 K.

Output temperature = 293 K.

Efficiency =..?

Step 2:

Determination of the efficiency of the engine.

Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:

Efficiency = output /input x 100

With the above formula, we can calculate the efficiency of the engine as follow:

Input temperature = 495 K.

Output temperature = 293 K.

Efficiency =..?

Efficiency = output /input x 100

Efficiency = 293/495 x 100

Efficiency = 59.19%

Therefore, the efficiency of the engine is 59.19%

Answer:

0.41

Explanation:

Trust me bro

Can someone please help me?

An alien spaceship is 650 m above the ground and moving at a constant velocity of 175 m/s upwards.
How high above the ground is the ship after 5 seconds?​

Answers

Answer:

1525 meters above ground

Explanation:

So to do this you will need to write this in slope intercept form or [tex]y=mx+b[/tex]. So 650 would be the b, 175 would be the m, and the x would be 5 so the equation would be [tex]y=175(5)+650[/tex] so if you solve or simplify the equation you will get 1525 meters above the ground and that would be our final answer.

By starting with a falsifiable hypothesis and proceeding to gather data and ensure replicability, a scientist can contribute to the potential formation of a(n)

Answers

Answer:

theory

Explanation:

A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.

Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.

A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.

Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.

What rule should be used to transform a table of data to represent the
reflection of f(x) over the yaxis?

Answers

Answer:

Multiply the x values with -1.

Explanation:

By multiplying the numbers by one, you are changing them to be the opposite of their original state.

You multiply the numbers that are in the x-value column because you are reflecting the image over the y-axis.

Hope this helped and good luck!

Answer:

Multiply each x-value in the table by -1

Explanation:

Other Questions
An account at a commercial bank designed for people who want to earn a higher savings rate is a(n) __________ account. Question options: regular savings account, ,regular checking ,share draft , or money market account Suppose that a 117.5 kg football player running at 6.5 m/s catches a 0.43 kg ball moving at a speed of 26.5 m/s with his feet off the ground, while both of them are moving horizontally.(a) Calculate the final speed of the player, in meters per second, if the ball and player are initially moving in the same direction. (b) Calculate the change in kinetic energy of the system, in joules, after the player catches the ball. (c) Calculate the final speed of the player, in meters per second, if the ball and player are initially moving in opposite directions. (d) Calculate the change in kinetic energy of the system, in joules, in this case. When deriving the quadratic formula by completing the square, what expression can be added to both sides of the equation to create a perfect square trinomial? A researcher predicts that the proportion of people over 65 years of age in a certain city is 11%. To test this, a sample of 1000 people is taken. Of this sample population, 126 people are over 65 years of age. The following is the setup for this hypothesis test: H0:p=0.11 Ha:p0.11 The p-value was determined to be 0.106. Come to a conclusion and interpret the results for this hypothesis test for a proportion (use a significance level of 5%) Select all that apply: a. Reject the H0. b. Fail to reject the H0. c. There is NOT sufficient evidence to conclude the proportion of people over 65 years of age in a certain city is 11%. d. There is sufficient evidence to conclude the proportion of people over 65 years of age in a certain city is 11%. Please helpsimplify the expression ab-ba/ab(a+b) Which of the following is NOT part of the urinary system? Question 9 options: A-Kidneys B-Bladder C-Urethra D-Spinal cord Who do you think the main character of the play The Glass Menagerie? Tom, Laura or Amanda? Why?? Is he or she the protagonist?? Is there an antagonist?? Write 3-5 Paragraphs. (This is due at 4:30 P.M.) How do you solve these adding negative numbers equations? Please explain thoroughly step by step.5+ (-3) = 8 + (-2)=3+(-4) = 6+ (-6)=1 + (-5)=(-2) + 5=(-7) + 4 =(-1) + 8 =(-6) + 3 =(-9) + 5 = Which is a software configuration management concept that helps us to control change without seriously impeding justifiable change? With an increase in product advertising of $50 million you expect to increase sales by 10,000 units. If unit grow margin is $4,800, will the additional advertising increase product contribution? Amy have 398.5 L of apple juice . Avery have 40098 ml of apple juice how many do they have all together Skin by Roald Dahl What does Drioli want to celebrate? From past records it is known that 10% of items from a production line are defective. If two items are selected at random, what is the probability that only one is defective? Sally who weighs 450 N, stands on a skate board while roger pushes it forward 13.0 m at constant velocity on a level straight street. He applies a constant 100 N force.Work done on the skateboarda. Rodger Work= 0Jb. Rodger work= 1300Jc. sally work= 1300Jd. sally work= 5850Je. rodger work= 5850J Solve 3* +5-220t = 0 Given the functions h(x) = 9x +1 and f(x)=(x/5)^2 , on a standard coordinate graph of y = h(f(x)), which of the following is a possible value for x when y = 37?a. 15b. 12c. 10d. 7e. 5 Several controls are used to safeguard inventory except a.keeping high-priced inventory behind lock and key. b.hiring security guards. c.allowing all employees access to the materials warehouse. d.installing sensors at all exits. "African cultural values are but wishful thinking". Discuss this statement in the context of modernity and the call to return to our roots 4.116 The lid of a roof scuttle weighs 75 lb. It is hinged at corners A and B and maintained in the desired position by a rod CD pivoted at C. A pin at end D of the rod fits into one of several holes drilled in the edge of the lid. For 5 50, determine (a) the magnitude of the force exerted by rod CD, (b) the reactions at the hinges. Assume that the hinge at B does not exert any axial thrust. Beer, Ferdinand. Vector Mechanics for Engineers: Statics (p. 219). McGraw-Hill Higher Education. Kindle Edition. Please help me to solve this . Thank you so much . And if possible , could you explain the answer too ? Base on the diagram , statea) The point which is 2 cm from R and 4 cm from P b) The point which is more than 2 cm from R and 4 cm from T c) The location of a moving point X in the diagram such that it is less than 4 cm from P and more than 2cm from R d) The location of a moving point Y in the diagram such that YR < 2 cm and YP < 4 cm e)The location of a moving point Z in the diagram such that ZT > 4 cm , ZP > 4 cm and ZR > 2 cm