Answer:
[H⁺] = 5.754 x 10^-13 M
Explanation:
Since pH is the negative log of the hydronium concentration, we can solve for hydronium concentration and then plug in our given pH:
pH = -log[H⁺]
-pH = log[H⁺]
10^-pH = [H⁺]
Let's plug in our pH:
[H⁺] = 10^-pH = 10^-12.24 = 5.754 x 10^-13 M
the temperature is increased, the position of equilibrium moves to the left, and the yield of ammonia decreases.
Answer:i don't rlly get the question but this is what i found on the internet :/
Explanation:
When the temperature is increased, the position of equilibrium moves in the endothermic direction to reduce the temperature. ... This means that as the temperature is increased, the position of equilibrium moves to the left, and the yield of ammonia decreases.
What has caused air quality in United States to improve/get better since the 1950s?
Answer:
better mileage on cars, took lead out of paint, smaller packaging like for delivery and store products, EPA laws updating
Answer:
Reducing pollution from transportation sources has led to healthier air for Americans. In cities, smog has been visibly reduced.
Explanation:
i hope this helped
I need help with this
Answer:
D. 108 grams/100g of H2O
Explanation:
I found the line KNO3 and when the line is at x value 60, it has the y value 108
id.k how to explain it it's just on the graph, ig just look at where it intersects both values
hope this helps
Please answer this
?????????
Answer:
bbfbtbryn'(tbtehtgrntn'ey(yntehtheyjey'y'y'yyt'yj't'yjyyngggengt-(jh
Explanation:
Find the kinetic energy of the horse using KE=1/2 mv².
A 500-kilogram horse runs at 5 meters/second. The horse’s kinetic energy is
[blank] joules.
Answer:
6250
Explanation:
so m=500 and v=5
so v²=25
using the equation we can do 1/2 x 500 x 25 = 6250
Please answer quickly!! 1. Which of the following statements is true?
a. The breaking of bonds is exothermic, and therefore has a negative delta H value.
b. The breaking of bonds is exothermic, and therefore has a positive Delta H value.
6. The breaking of bonds is endothermic, and therefore has a negative Delta H value.
d. The breaking of bonds is endothermic, and therefore has a positive Delta H value
Answer:
d
Explanation:
a positive change in enthalpy is required to break a bond, while a negative change in enthalpy is accompanied by the formation of a bond. Bond breaking in endothermic because it requires energy, therefore delta H is positive.
Explain why silicon dioxide does not conduct electricity.
Answer:
Explanation:
Silicon dioxide doesn't have any mobile electrons or ions - so it doesn't conduct electricity either as a solid or a liquid.
What is the molar mass of H2CO3
Answer:
Molar mass of H2CO3 : 62.03 g/mol
3. Add labels for mass extinction and adaptive radiation:
Answer:
I'm assuming you need to label above the lines. So, above the line where the Cretaceous period ends is mass extinction and where the bracket lies is adaptive radiation.
Explanation:
Mass extinctions are periods of time where the organisms are essentially wiped out in an extremely brief period of time. You can see how the species just drops off. Adaptive radiation occurs when there is a diversification of a group of organisms as evident by the rise in the number of marine animal groups shown by the bracketed area.
n E Which is the electron configuration for zinc? O 1s22s22p3s23p64s23d8 O 1s22s22p 3s 3p64s+3d10 01s 2s 2p 3s 23p64523d10 0 1522s 2p 3s23p64533d10
The electronic configuration is used to explain the orbitals of an atom and it helps to determine the physical and chemical properties of the elements. The electronic configuration of zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. The correct option is C.
What is electronic configuration?The distribution of electrons in the atomic orbitals is given by the electronic configuration. It is a standard notation in which all the electrons holding atomic subshells are arranged in a sequence. Each element has a unique electronic configuration.
The electronic configuration of an element can be written in two ways, in standard notation, and in condensed form. In the case of elements with larger atomic numbers, the electronic configuration becomes lengthy in standard notation. So in such cases condensed form is generally used.
In condensed form electronic configuration of zinc is [Ar] 3d¹⁰4s² and in standard form it is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰.
Thus the correct option is C.
To know more about electronic configuration, visit;
https://brainly.com/question/19589767
#SPJ7
Identify the decay mode
Please answer asap no explanation needed
(Look at picture)
Answer:
1921 :3 espero y te ayude crack
What does corona mean?
Answer:
.
Explanation:
arrange the following atoms na, ca, a1, b, br, f in order of increasing electronegativity?
Explanation:
f, br, b, A1, CA, na in order of increasing electronegativity
Please help me with this question!!
Answer: 824.6 g of NaCl are produced from 500.0 g of chlorine.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex] [tex]\text{Moles of} Cl_2=\frac{500.00g}{71g/mol}=7.04moles[/tex]
[tex]2Na+Cl_2\rightarrow 2NaCl[/tex]
According to stoichiometry :
1 mole of [tex]Cl_2[/tex] produce = 2 moles of [tex]NaCl[/tex]
Thus 7.04 moles of [tex]Cl_2[/tex] will produce=[tex]\frac{2}{1}\times 7.04=14.08moles[/tex] of [tex]NaCl[/tex]
Mass of [tex]NaCl=moles\times {\text {Molar mass}}=14.08moles\times 58.5g/mol=824.26g[/tex]
Thus 824.6 g of NaCl are produced from 500.0 g of chlorine.
If we use 18 moles of H2 how many moles of H2O do we make? Use this chemical equation: 6H2 + O2 → 3H2O
9 mol H₂O
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightChemistry
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisAnalyzing reactions RxNExplanation:Step 1: Define
[RxN - Balanced] 6H₂ + O₂ → 3H₂O
[Given] 18 mol H₂
[Solve] mol H₂O
Step 2: Identify Conversions
[RxN] 6 mol H₂ → 3 mol H₂O
Step 3: Stoich
[DA] Set up conversion: [tex]\displaystyle 18 \ mol \ H_2(\frac{3 \ mol \ H_2O}{6 \ mol \ H_2})[/tex][DA] Simplify: [tex]\displaystyle 18 \ mol \ H_2(\frac{1 \ mol \ H_2O}{2 \ mol \ H_2})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 9 \ mol \ H_2O[/tex]Answer:
9 mol H₂O
give me brainliest pls
chemistry:
plz help me:D
Answer:
1 atom only with the unit u.
Explanation:
The formula mass of a substance is defined as the sum of the atomic masses of all atoms in a formula unit of the particular substance in question.
Thus the correct answer is option A
Which of the following ions will form the weakest bond with Na+?
Br^-
F^-
CI^-
I^-
Answer:
Iodide ion, I- will form the weakest bond with sodium ion, Na+
Explanation:
Electronegativity is the ability with which a neutral atom attracts electrons to itself.
The electronegativity of the halogens decrease on going down the group among the halogens. This is is because on going down the group, the atomic size as well as ionic size of the atoms in the group increases. This increase decreases the effect of the attraction of the positive nucleus on the electrons. Thus, valence electrons can be more readily removed.
The transfer of electrons from metallic sodiummto a halogen results in annionic bond between the two atoms. The strength of the ionic bond decreases on going down the group due to decrease in electronegativity. Thus, iodide ion, I-, which is the least electronegative among the given options will form the weakest bond with Na+.
a 5 g ice cube starts life at -1 C if 2182.5 j are added to it what will be the final temperature upon his demise ?
Answer:
Final Temp = 23.92°C
Explanation:
ΔH(total) = (m·c·ΔT)ice + (m·ΔH(f))melt'g + (m·c·ΔT)water
2182.5j = (5g)(2.092j/g·°C)(1°C) + (5g)(334.56j/g) + (5g)(4.184j/g·°C)(ΔT)
(2182.5 - 10.46 - 1672.8)j = 20.92j/°C·ΔT
ΔT = (2182.5 - 10.46 - 1672.8)j / 20.92j/°C = 23.92°C
Since the melting ice starts and ends at 0°C and is then warmed to 23.92°C then the temperature change is also the final temp of the water based upon given energy input values.
when high pressure is applied to a gas, its
Answer: volume decreases
10 The graph below compares the density, in grams per cubic centimeter (g/cm'), of
four different substances.
DENSITY OF SUBSTANCES
20
15
Density (g/cm)
10
5.
0
w
Y
Z
Substances
Based on information from the graph, which of the following best compares the
physical properties of two of the substances?
F. Substance X has less mass than substance Y has.
G. Substance W has less volume than substance X has.
H. Substance Y would have less mass than substance Z would have if they had the
same volume.
1. Substance Z would have less mass than substance W would have if they had the
same volume.
Answer: the awnser is A
Explanation:
Edge 2020
What are two different forms of a single gene called?
A.
traits
B.
factors
C.
alleles <<<
D.
chromosomes
Two different forms of a single gene are called 'alleles
What process is being shown by the movement of particles from one flower to another? Please help me fast.
Answer:
its diffusion can i get brainly pleasee tyyy
How are cellular respiration and photosynthesis related?
O A. They both use light energy to produce chemical energy.
O B. They both use ATP energy to produce radiant energy.
C. All of their chemical products are gases found in the atmosphere.
O D. The chemical products of one are the reactants of the other.
Answer: D. The chemical products of one are the reactants of the other.
I just took the quiz
Cellular respiration and photosynthesis related as the chemical products of one are the reactants of the other and the correct option is option D.
What is the difference between Respiration and Photosynthesis?Respiration is something that occurs in all living organisms. Thus, it is a process that converts oxygen and glucose into carbon dioxide and water and ultimately makes energy for your body cells.
On the other hand, photosynthesis takes place in green plants that contain chlorophyll. In this process, they make use of sunlight and water for converting it into energy.
Plants release oxygen which is a by-product of photosynthesis, and we breathe in oxygen so that our cells can carry out cellular respiration and generate ATP.
Therefore, Cellular respiration and photosynthesis related as the chemical products of one are the reactants of the other and the correct option is option D.
Learn more about the Difference between Respiration and Photosynthesis, here:
https://brainly.com/question/31232878
#SPJ5
A reaction in the laboratory yields 5.98 g KAI(SO2)2, How many moles of potassium aluminum
sulfate were produced?
Answer:
0.0308 mol
Explanation:
In order to convert from grams of any given substance to moles, we need to use its molar mass:
Molar mass of KAI(SO₂)₂ = MM of K + MM of Al + (MM of S + 2*MM of O)*2Molar mass of KAI(SO₂)₂ = 194 g/molNow we calculate the number of moles of KAI(SO₂)₂ contained in 5.98 g:
5.98 g ÷ 194 g/mol = 0.0308 molWhich statement describes the Arrhenius interpretation of acids and bases?
It has a wider range of applications than the Bronsted-Lowry interpretation.
It has a wider range of applications than the Lewis and Bronsted-Lowry interpretations.
It is used in situations that involve bases that do not produce hydroxide ions.
It is limited to situations that involve aqueous solutions or specific compounds.
Answer: Composition is an orderly arrangement of visual structures (elements and principles) to create a mood, add meaning and direct the viewers' attention to the purpose of the artwork. Compositions are said to be 'designed' according to the specific intent of the artist.
The statement that describes the Arrhenius interpretation of acids and bases is that it is limited to situations that involve aqueous solutions or specific compounds. Therefore, option D is correct.
What is Arrhenius's interpretation?Arrhenius's interpretation defined an acid as a substance that increases the concentration of hydrogen ions (H⁺) when dissolved in water and a base as a substance that increases the concentration of hydroxide ions (OH⁻) when dissolved in water.
According to Arrhenius's interpretation, when an acid is dissolved in water, it releases H⁺ ions, which then react with water molecules to form H₃O⁺ ions, also known as hydronium ions.
Similarly, when a base is dissolved in water, it releases OH⁻ ions, which then react with water molecules to form H₂O molecules and more OH⁻ ions. Thus, option D is correct.
Learn more about Arrhenius, here:
https://brainly.com/question/15196401
#SPJ5
Initially a NaOH solution was standardized by titration with a sample of potassium hydrogen phthalate, KHC8H4O4, a monoprotic acid often used as a primary standard. A sample of pure KHC8H4O4 weighing 1.518 grams was dissolved in water and titrated with the NaOH solution. To reach the equivalence point, 26.90 milliliters of base was required. Calculate the molarity o
Answer:
0.2763M NaOH
Explanation:
Based on the reaction of hydrogen phtalate, KHP, with sodium hydroxide, NaOH:
KHP + NaOH → KNaP + H₂O
1 mole of KHP reacts per mole of NaOH.
In the equivalence point, the moles of NaOH added = Moles of KHP that were dissolved.
Thus, to solve this question, we must find the moles of KHP = Moles NaOH. With the moles and the volume of NaOH required to reach the equivalence point we can find molarity of NaOH solution:
Moles KHP = Moles NaOH (Molar mass KHP = 204.22g/mol):
1.518g * (1mol / 204.22g) = 7.433x10⁻³ moles NaOH
In 26.90mL = 0.0269L:
7.433x10⁻³ moles NaOH / 0.02690L
0.2763M NaOHHow does the strength of a metallic bond compared to other types of bonds?
a. metallic bonds are weaker than ionic bonds or covalent bonds.
b. metallic bonds are equal in strength to ionic and covalent bonds.
c. metallic bonds are weaker than ionic bonds but stronger than covalent bonds.
d. metallic bonds are weaker than covenant bonds but stronger than ionic bonds.
While metallic bonds have the strong electrostatic force of attractions between the cation or atoms and the delocalized electrons in the geometrical arrangement of the two metals. ... Metallic bonds are malleable and ductile, while covalent bonds and ionic bonds non-malleable and non-ductile.
Which of the following is the correct arrangement of energy transformation in a musical christmas light
Answer:
heat energy light energy sound energy
Explanation:
pa follo
2 Al + Fe2O3 = Al2O3 + 2 Fe
If 0.915 mol Al2O3 is produced, how many grams of iron is produced?
Answer:
−7.389056fo3+5.436564f
−l2o3+2l
Explanation:
2al+f(2.7182822)o3=al2o3+2f(2.718282)
Step 1: Add -al^2o^3 to both sides.
7.389056fo3+2al+−al2o3=al2o3+5.436564f+−al2o3
−al2o3+7.389056fo3+2al=5.436564f
Step 2: Add -7.389056fo^3 to both sides.
−al2o3+7.389056fo3+2al+−7.389056fo3=5.436564f+−7.389056fo3
−al2o3+0fo3+2al=−7.389056fo3+5.436564f
Step 3: Factor out variable a.
a(−l2o3+2l)=−7.389056fo3+5.436564f
Step 4: Divide both sides by -l^2o^3+2l.
a(−l2o3+2l)
−l2o3+2l
=
−7.389056fo3+5.436564f
−l2o3+2l
a=
−7.389056fo3+5.436564f
−l2o3+2l
Which layers have melting? (Choose 2) *
Lithosphere
Asthenosphere
Outer core
Inner Core