Find the mass. 10 points. Will give brainliest.

Explanation:

A theory is a way of explaining an object or event using a set of facts.

Answer:

W =1562.53 N

Explanation:

It is given that,

Radius of the aluminium ball, r = 24 cm = 0.24 m

The density of Aluminium, [tex]d=2698.4\ kg/m^3[/tex]

We need to find the thrust and the force. The mass of the liquid displaced is given by :

[tex]m=dV[/tex]

V is volume

Weight of the displaced liquid

W = mg

[tex]W=dVg[/tex]

So,

[tex]W=dg\times \dfrac{4}{3}\pi r^3\\\\W=2698.4\times 10\times \dfrac{4}{3}\times \pi \times (0.24)^3\\\\W=1562.53\ N[/tex]

So, the thrust and the force is 1562.53 N.

The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.

The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.

The square of the distance has an inverse relationship with the light intensity;

[tex]\rm I = \frac{1}{r^2}[/tex]

Where,

I is the light intensity

r is the distance

Let r is the distance and I is the sound intensity for case 2;

r' = 2r

[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]

When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.

Hence the value of the fraction is 1/4.

To learn more about the illumination refer;

https://brainly.com/question/20160684

#SPJ2

Answer:

Package's vertical displacement(s) = 22.12 meter

Explanation:

Given:

Speed of plane = 120 m/s

Total distance = 255 m

Find:

Package's vertical displacement(s)

Computation:

Time taken = Distance / Speed

Time taken = Total distance / Speed of plane

Time taken = 255 / 120

Time taken = 2.125 s

Acceleration due to gravity(g) = 9.8 m/s²

Initial velocity (u) = 0

So,

Package's vertical displacement(s) = ut + (1/2)gt²

Package's vertical displacement(s) = (0)(2.125) + (1/2)(9.8)(2.125)²

Package's vertical displacement(s) = 22.12 meter

Answer: -22.1

Explanation:

I just did the Khan Academy and that was the answer, not the one provided by that one person. :)))

Answer: 0.0180701 s

Explanation:

Given the following :

Length of string (L) = 10 m

Weight of string (W) = 0.32 N

Weight attached to lower end = 1kN = 1×10^3

Using the relation:

Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity

g = acceleration due to gravity = 9.8m/s^2

Weight of string = 0.32N

Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]

Time = √3.2 / 9800

= √0.0003265

= 0.0180701s

Answer:

59.19%

Explanation:

Step 1:

Data obtained from the question. This include the following:

Input temperature = 495 K.

Output temperature = 293 K.

Efficiency =..?

Step 2:

Determination of the efficiency of the engine.

Efficiency is simply defined as the ratio of output to input times 100. Mathematically, it is expressed as:

Efficiency = output /input x 100

With the above formula, we can calculate the efficiency of the engine as follow:

Input temperature = 495 K.

Output temperature = 293 K.

Efficiency =..?

Efficiency = output /input x 100

Efficiency = 293/495 x 100

Efficiency = 59.19%

Therefore, the efficiency of the engine is 59.19%

Answer:

0.41

Explanation:

Trust me bro

Answer:

Flexibility Increases

Pre-breathe time decreases

Mass of suit decreases.

Explanation:

Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.

Answer:

Explanation:

For entropy change the formula is

ΔS = ΔQ / T

ΔQ = Δ H

ΔS = Δ H / T

Given

Δ H = + 162.8 kJ

We can take equilibrium temperature as average temperature of the whole process

So, T = 273 + 87 = 360 K

ΔS = Δ H / T

=  162.8 kJ  / 360

= +  0.508 kJ / K .

When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K

For The entropy change, the formula is

Then ΔS = ΔQ / T

After that ΔQ = Δ H

Then ΔS = Δ H / T

Given as per question are:

Then Δ H = + 162.8 kJ

Now We can take equilibrium temperature as average temperature of the whole process are:

So, T is = 273 + 87 = 360 K

Then ΔS = Δ H / T

After that = 162.8 kJ / 360

Therefore, = + 0.508 kJ / K.

Find more information about Entropy change here:

https://brainly.com/question/17241209

Velocity is the description of an object's motion from one point to another.

It tells the speed with which the trip is completed, and the direction from the start-point to the end-point.  It tells nothing about any twists, turns, loops, bends, or stops along the way.

Answer:

t = 0.051 seconds

Explanation:

Given that,

A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.

The average speed of the skydiver is 174 miles/hour

We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,

[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]

So, a skydiver dive for 0.051 seconds.

Answer:

λ₀ = 2 d n

Explanation:

A soap film is a layer where the lus is reflected on the surface and on the inside of the film, these two reflected rays can interfere with each other either constructively or destructively.

Let's analyze the general conditions of this interference,

* When the ray of light reaches the surface of the film it is reflected, as the index of refraction of the air is less than the index of the film, the reflected ray has a phase change of 180º

* When the ray penetrates the film, its wavelength changes due to the refractive index of the film.

          λ = λ₀ / n

where lick is the wavelength in the vacuum or air and n index of refraction of the film, in general this interference is observed perpendicular to the film, so the sine veils 1. the expression for constructive interference taking in what previous remains

         2d = (m + ½) λ

the expression for destructive interference remains

         2d = m λ

          2d = m λ₀ / n

When the film is placed on a glass plate whose index of refraction is greater than the index of refraction of the film, in the reflection in the lower part of the film another phase difference of 180º is created, for which we have a difference of total phase of 180 +180 = 360º, which is equivalent to no phase difference, therefore the two previous equations are interchanged.

Therefore where we had destructive interference now a cosntructive interference happens we can see the reflected light.

Find us the wavelength that this constructive interference creates

           2d n = m λ₀

           λ₀ = 2 d n / m

To find the minimum wavelength, suppose we observe the first interference pattern m = 1

         λ₀ = 2 d n

where d is the thickness of the film and n the index of refraction of the same

Answer:

θ = 41.8º

Explanation:

This is an internal total reflection exercise, the equation that describes this process is

         sin θ = n₂ / n₁

where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂

        θ = sin⁻¹ n₂ / n₁

let's calculate

       θ = sin⁻¹ (1.00 / 1.50)

       θ = 41.8º

Answer:

Net force = 0

Explanation:

Short answer: if the middle book is not acceleration in any direction, the net force is zero.

Long answer: refer to the attached free-body diagram (FBD) to see why the net force is zero.  Skills to draw FBD are  essential in solving problems in statics.

Top book exerts -mg (downwards) on the middle book.

Middle book exerts -mg (downwards) on the bottom book.

Total downward force is -mg-mg = -2mg

By Newton's third law, when an object is not in motion, reaction equals action of -2mg in the opposite direction, therefore the reaction (upwards) is +2mg.

This makes the net force of -2mg (downwards) + 2mg (upwards) =0

On a horizontal table, three books are resting and balanced. The net force on the middle book will be equal to zero.

Equilibrium is the condition of an object when two or more opposing forces, whether internal, external or a combination of both, act on the body and cancel one another out to maintain the object in the same state as it was. The Latin term for weight or balance, libra, serves as the origin of the word equilibrium.

According to the question :

The net force is 0 if the middle book does not accelerate in any direction.

The Middle book is impacted negatively (downwards) by the top book.

The middle book pulls down on the lower book by -mg.

The total downward force is -2mg = (-mg-mg)

According to Newton's third rule, a reaction when an item is not moving equals an action of -2mg in the opposite direction, hence the reaction (upwards) is a response of +2mg.

Consequently, the net force of -2mg (downwards) + 2mg (upwards) = 0 is created.

To get more information about Equilibrium :

https://brainly.com/question/28527601

#SPJ2

Answer:

Janaki temple and Pashupatinath Temple are found in Nepal. These structures are religious and they increase the pride of the country through tourism. These temples are important in the country and are mostly visited by tourists.

This also helps to bring in income for the country and also helps by attracting many visitors and a corresponding development of its tourism industry.

Answer;

Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Explanation:

Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .

one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Answer:

625 cm²

Explanation:

The pressure is the same on both pistons.

F/A = F/A

200 N / 25 cm² = 5000 N / A

A = 625 cm²

Explanation:

Given,

I = 5 A

V = 240 V

T = 25 mins = 1500 sec

Now,

Energy dissipated = IVT= 5×240×1500 = 1800000 J

Answer:

theory

Explanation:

A scientist can contribute to the formation of a theory in a particular subject by conducting research along the line of that subject.

Conducting research requires the formation of a hypothesis and testing the hypothesis by conducting a relevant experiment during which data are gathered, analyzed, and interpreted in order to falsify or accept the hypothesis.

A good experiment must be replicate-able. When the same experiment is repeated by different independent researchers and the same conclusion is arrived at, this could potentially lead to the formation of a theory.

Hence, a scientist can contribute to the formation of a theory by conducting an experiment with replicability in order to test a hypothesis.

Answer:

The neutron is a subatomic particle, symbol 

n

 or 

n0

, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.

Explanation:

pls mark me as BRAINLIEST

Answer:

1) a    α,  m   I,  W=F.d    W =τ . θ,

2)  a = v²/r

Explanation:

1) The amounts of rotational and translational motion are related

acceleration is

        a = d²x / dt²

    linear displacement is equivalent to angular rotation, therefore angular acceleration is

      α = d²θ / dt²

force in linear motion is equivalent to moment in endowment motion

       F = m a

       τ = I α

the mass is the inertia of the translation, in rotational motion the moment of inertia is the rotational inertia

          I = m r²

Work is defined by W = F. d

in rotation it is defined by W = τ . θ

The linear momentum is p = mv

the angular momentum L = I w

momentum the linear motion is I = F dt

in the rotation it is I = τ dt

2) The velocity is a vector therefore it has modulus and direction, linear acceleration changes the modulus of velocity, whereas circular motion changes the direction (the other element of the vector).

      [tex]a_{c}[/tex]Ac = v²/r

Answer:

they get closer together

Explanation:

I inferred you've referring to a close electrical circuit.

Answer:

The circuit is complete.

Explanation:

A closed electrical circuit is indeed a complete circuit. Also, it allows charges to flow, the bulbs in the circuit will shine and it is not broken.

It is termed closed circuit because there is no brokage in the series of electrical wires or the switch; which may prevent the free flow of current or charges. Thus, a feature that marks closed circuits is that they are complete.

Answer:

The circuit is complete.

Explanation: