For his phone service, Omar pays a monthly fee of $28, and he pays an additional $0.05 per minute of use. The least he has been charged in a month is $97.65. What are the possible numbers of minutes he has used his phone in a month? Use m for the number of minutes, and solve your inequality for m.

Answer:

6x² + 19x + 15

Step-by-step explanation:

(2x+3)(3x + 5)

= 6x² + 10x + 9x + 15

= 6x² + 19x + 15

So, the answer is 6x² + 19x + 15

As likely as not (assuming the bag contains an equal number of magnets for each letter in the alphabet).

Probability is a measure of the likelihood or chance that a particular event will occur. It is expressed as a number between 0 and 1, with 0 indicating that the event is impossible and 1 indicating that the event is certain to occur.

In probability theory, the probability of an event is calculated by dividing the number of ways that the event can occur by the total number of possible outcomes. This is known as the probability formula:

probability = Number of favorable outcomes / Total number of possible outcomes

Probability is used in a wide range of fields, including statistics, finance, physics, and engineering, to model and analyze uncertain situations and make predictions.

B. Likely (assuming the bag contains an equal number of magnets for each letter in the alphabet, and that there are more consonants than vowels in the alphabet).

C. Unlikely (assuming the deck contains an equal number of red and black cards).

D. Impossible (assuming the deck contains only standard playing cards with 52 cards, including 13 cards for each of the four suits).

E. Unlikely (assuming the deck contains only standard playing cards with 52 cards, including 4 cards for each number or face value).

To learn more about probability, visit

https://brainly.com/question/30034780

#SPJ1

a) Any value outside of Q1 - 1.5(IQR) and Q3 + 1.5(IQR) can be considered a potential outlier.

b) This will give us a visual representation of the distribution of income among the full-time students.

c) It is important to analyze outliers carefully to ensure that they are not artificially skewing the results of our analysis.

(a) To check for outliers in the data set, we can use the box-and-whisker plot or the z-score method. However, since we do not have the exact data, we cannot use these methods. One way to identify potential outliers is to calculate the quartiles (Q1, Q2, and Q3) and the interquartile range (IQR).

(b) To draw a histogram of the data, we can use the frequency distribution table given in the question. The x-axis should represent the income ranges (e.g. $0-$100, $100-$200, etc.) and the y-axis should represent the frequency (i.e. the number of students who earned income within each range).

(c) If there are any outliers in the data set, we need to investigate them further to determine the reason for their unusual values. Possible reasons for outliers could be data entry errors, extreme values due to high- or low-income jobs, or unique situations such as unexpected windfalls or emergencies.

To learn more about frequency distribution visit;

https://brainly.com/question/14926605

#SPJ11

The estimated regression equation for the given data is y = -30.7 + 3.409x

To develop an estimated regression equation for the given data, we need to use the method of least squares.

The formula for the slope of the regression line is given by:

b = ∑(xi - x)(yi - y) / ∑(xi - x)²

where xi and yi are the individual values of the two variables, x and y are their respective means.

The formula for the intercept of the regression line is given by:

a = y - b × x

where a is the intercept and b is the slope.

Using the given data, we can calculate the values of x, y, b, and a as follows

x = (6 + 11 + 15 + 18 + 20) / 5 = 14

y = (7 + 9 + 12 + 21 + 30) / 5 = 15.8

∑(xi - x)(yi - y) = (6 - 14)(7 - 15.8) + (11 - 14)(9 - 15.8) + (15 - 14)(12 - 15.8) + (18 - 14)(21 - 15.8) + (20 - 14)(30 - 15.8) = 306.8

∑(xi - x)² = (6 - 14)² + (11 - 14)² + (15 - 14)² + (18 - 14)² + (20 - 14)² = 90

b = ∑(xi - x)(yi - y) / ∑(xi - x)² = 306.8 / 90 = 3.409

a = y - b × x = 15.8 - 3.409 × 14 = -30.7

Learn more about regression equation here

brainly.com/question/14184702

#SPJ4

The given question is incomplete, the complete question is:

Given are data for two variables, x and y. Develop an estimated regression equation for these data.

The best center of the speed of the last 10 pitches thrown by a pitcher is the mean

From the question, we have the following parameters that can be used in our computation:

{90, 92, 85, 88, 94, 86, 93, 90, 88, 95}

The possible measure of centers are

In this case, we use the mean

This is because the data values do not have any outlier present in them

Hence, the center is the mean

Read mroe about measure of center at

https://brainly.com/question/17631693

#SPJ1

Answer:  the answer is A. 14.

Step-by-step explanation: In each trial of the reenactment, Scott chooses one card from the stack and records its digit. Based on the given data, a digit of or 1 speaks to a objective scored, and a digit of 2 through 9 speaks to a missed endeavor.

Out of the 5 endeavors per amusement, on the off chance that Scott scores precisely 2 objectives, it implies he missed 3 endeavors. Subsequently, the likelihood of this occasion can be calculated as:

P(exactly 2 objectives) = (0.2)²(0.8)³ = 0.008192

This likelihood can be utilized to discover the anticipated number of diversions in which Scott scores precisely 2 objectives, by duplicating it by the overall number of diversions reenacted:

Anticipated number of recreations = P(exactly 2 objectives) × Add up to number of recreations = 0.008192 × 84 ≈ 0.68

Adjusting to the closest entire number, we get that Scott is anticipated to score precisely 2 objectives in 1 diversion out of the 84 recreated diversions.

The monthly interest rate is the annual interest rate divided by 12

To calculate the monthly interest rate, we need to divide the annual interest rate by 12 (since there are 12 months in a year).

So if the annual interest rate is 8%, the monthly interest rate can be calculated as:

Monthly interest rate = Annual interest rate / 12

Monthly interest rate = 8% / 12

Monthly interest rate = 0.6667%

Therefore, the monthly interest rate would be 0.6667%.

Read more about interest at

https://brainly.com/question/24924853

#SPJ1

These investments do indeed produce a net return of $133.

What is algebra?

Algebra is a branch of mathematics that deals with mathematical operations and symbols used to represent numbers and quantities in equations and formulas.

Let's call the amount Devon invested in the real estate fund "x". Then, we know that the amount invested in the large cap stock fund is twice that, or "2x". The total amount invested is $9500, so we can write:

x + 2x + y = 9500

where "y" is the amount invested in the bond fund.

We also know the returns of each fund, so we can calculate the total return on the investments:

0.047(2x) - 0.122x + 0.054y = 133

Simplifying this equation, we get:

0.998x + 0.054y = 133

We have two equations and two unknowns (x and y), so we can solve for them. Let's start by solving the first equation for y:

y = 9500 - 3x

Now we can substitute this expression for y into the second equation:

0.998x + 0.054(9500 - 3x) = 133

Simplifying and solving for x, we get:

0.888x = 459.8

x = 517.57

So Devon invested $517.57 in the real estate fund. The amount invested in the large cap stock fund is twice that, or $1035.14. The amount invested in the bond fund is:

y = 9500 - 3x = 8464.29

To check that these investments produce a net return of $133, we can calculate the total return on each investment and add them up:

0.047(2x) - 0.122x + 0.054y = 0.047(2517.57) - 0.122517.57 + 0.054*8464.29 = 133.00

So these investments do indeed produce a net return of $133.

To learn more about algebra from the given link:

https://brainly.com/question/24875240

#SPJ1

The length created by a central angle is 0.04 feet.

What is radius of circle?

The radius of a circle is the distance from the center of the circle to any point on the circle's edge. It is typically denoted by the letter "r" and is one of the fundamental measurements used to describe the geometry of a circle.

First, we need to convert the central angle from degrees to radians. Since there are 60 minutes in a degree, we can divide 18 by 60 to get the angle in degrees as a decimal,

18/60 = 0.3 degrees

Next, we convert this to radians by multiplying by π/180,

0.3 × π/180 ≈ 0.00524 radians

To find the length of the arc created by this central angle, we use the formula,

arc length = radius × central angle

So, for a circle of radius 8 feet and a central angle of 0.00524 radians, the arc length is arc length = 8 × 0.00524 ≈ 0.04192 feet

Rounded to the nearest hundredth, the length of the arc is approximately 0.04 feet.

Learn more about radius of the circle here,

https://brainly.com/question/28162977

#SPJ1

The percentage of the original area of wetlands currently left in the United States is approximately 50%. So, the correct

option is 50% (option 3).

Percentages are a way of expressing a proportion or a fraction as a part of 100. It is denoted by the symbol "%".

According to the United States Environmental Protection Agency (EPA), it is estimated that about 50% of the original

wetlands in the contiguous United States have been lost since the 1600s due to human activities such as agriculture,

development, and urbanization. Therefore, the correct answer to the question is 50%.

for such more questions on percentages

https://brainly.com/question/24877689

#SPJ11

The percentage of the original area of wetlands currently left in the United States is approximately 50%.

Wetlands are regions of land where the soil is continually or intermittently soaked with water. Wetlands have a particular hydrology, soil, and vegetation mix that results in specialised ecosystems that offer a variety of ecological functions.

There are many different types of habitats where wetlands can be found, such as coastal locations, interior regions, and high-altitude mountain regions. They come in a variety of shapes, such as marshes, swamps, bogs, fens, and estuaries, and can be freshwater, brackish, or saline.

Wetlands are significant for several reasons. For species, such as migrating birds, amphibians, and fish, they offer crucial habitats. They also aid in removing contaminants from water, lessen the effects of flooding, and give people access to recreational activities. Wetlands are crucial for carbon sequestration as well.
Based on the information provided, the question is asking for the approximate percentage of the original area of wetlands currently left in the United States. The answer is approximately 50%.

Learn more about wetlands here:

https://brainly.com/question/30010590

#SPJ11

The coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

The circumference of the coin can be calculated as follows to determine the number of turns it makes:

C = πd

where C is the circumference, d is the diameter, and π is the mathematical constant pi (approximately equal to 3.14159).

So, for the given $2 coin with a diameter of 25.75 mm, the circumference is:

C = πd = 3.14159 x 25.75 mm ≈ 80.926 mm

Divide the distance traveled by the coin's circumference to determine the number of turns it makes when rolled on its edge for 1.34 meter:

Number of turns = distance traveled / circumference of the coin

Number of turns = 1.34 m / 0.080926 m

Number of turns ≈ 16.53

Therefore, the coin makes approximately 16.53 turns when rolled on its edge for 1.34 m.

know more about circumference visit :

https://brainly.com/question/28757341

#SPJ1

Step-by-step explanation:

rotate the triangle in your mind (or as actual picture on your phone or computer), so that the right angle is the bottom right or bottom left, and C being the opposite bottom angle.

then we see

28 = cos(C) × 35

21 = sin(C) × 35

and so,

sin(C) = 21/35 = 3/5

cos(C) = 28/35 = 4/5

tan(C) = sin(C)/cos(C) = 3/5 / 4/5 = 3/4

The distance of the base of the tower and the airplane is 348.5 ft,  and the right option is 4. 348.5 ft.

Distance is the length between two points.

To calculate the distance of the base of the tower and the airplane, we use the formula below.

Formula:

Where:

From the diagram,

Given:

SUbstitute these values into equation 1 and solve for A

Hence, the right option is 4. 348.5 ft.

Learn more about Distance here: https://brainly.com/question/26046491

#SPJ1

True.  

The decision that would result from a Type I error is:

Closing the park when the lead levels are within the allowed limit. C

In this scenario, the null hypothesis is that the lead levels are okay, and the alternative hypothesis (Ha) is that lead levels exceed the limit.

The decisions that would result from the Type I error are:

Closing the park when the lead levels are in excess of the allowed limit.

This decision would be a false positive, as the park would be closed even though the lead levels are actually within the allowed limit.

This is a Type I error.

Closing the park when the lead levels are within the allowed limit.

This decision would be a correct decision as the park should be closed if the lead levels are not within the allowed limit.

This is not a Type I error.

Keeping the park open when the lead levels are in excess of the allowed limit.

This decision would be a false negative, as the park would remain open even though the lead levels are actually above the allowed limit.

This is a Type II error.

Closing the park because of the increased noise level in the neighborhood.

This decision is not related to the hypothesis testing for lead levels in the park, and therefore, it is not a Type I error.

For similar questions on Error

https://brainly.com/question/28771966

#SPJ11

Answer: 4545 yards

Step-by-step explanation:

We can use similar triangles to solve this problem. Let's represent the height of the flagpole with the variable "x".

Using the triangle formed by Carla's line of sight, the height of the apartment building, and the top of the flagpole, we can set up the following proportion:

x / (x + 1515) = 15 / 20

Simplifying this proportion, we get:

4x = 3(x + 1515)

4x = 3x + 4545

x = 4545

Therefore, the height of the flagpole is 4545 yards.

Answer:x= -67 over 24

Step-by-step explanation:

Answer:

To determine which ratio is proportional to 80:60, we need to simplify the ratio by dividing both terms by their greatest common factor. In this case, the greatest common factor of 80 and 60 is 20, so:

80/20 = 4

60/20 = 3

Therefore, the simplified ratio is 4:3.

Now we can compare this ratio to the given options to see which one is proportional to 4:3:

16:15 is not proportional

16:12 is proportional (since 16/4 = 4 and 12/3 = 4)

18:15 is not proportional

18:12 is proportional (since 18/3 = 6 and 12/2 = 6)

Therefore, the ratio that is proportional to 80:60 is 16:12.

For events A and B to be independent, the condition that must be true is:
P(A ∩ B) = x * y

The correct condition that must be true if events A and B are independent is:

P(A ∩ B) = P(A) x P(B).

where P(A) is the probability of event A, P(B) is the probability of event B, and P(A ∩ B) is the probability of both events A and B occurring together.

In other words, if events A and B are independent, then the probability of both events occurring together is equal to the product of their individual probabilities.

When two events A and B are independent, the following condition must be true:
P(A ∩ B) = P(A) * P(B)
In your case, the probability of event A is x, and the probability of event B is y.

Therefore, the correct answer is:

P(A ∩ B) = x*y

For similar question on condition.

https://brainly.com/question/10739947

#SPJ11

The bigger engine is larger than the smaller one by 235.4724 cubic centimeters.

We know that 1 inch=2.54 centimeters

Then 1 cubic inches-(2.54)^3 cubic centimeters

We have that:

⇒ 1 cubic inches=(2.54)3 = 16.3870 cubic centimeters

⇒350 cubic inches= 350 x 16.3870 = 5735.4724 cubic centimeters

Since, the other displaces 5,500 cubic centimeters  and 5735.4724< 5500. The difference between them is:

= 5735.4724 - 5500

= 235.4724

Hence, the bigger engine larger than the smaller one by 235.4724 cubic centimeters.

Read more about Engine size

brainly.com/question/14439953

#SPJ1

Answer:

The amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Step-by-step explanation:

The given function is:

f(t) = -1/2(4t - 2π)

We can rewrite this function in the form:

f(t) = A cos(B(t - C)) + D

where A is the amplitude, B is the period, C is the phase shift, and D is the vertical shift.

Comparing this with the given function, we can see that:

A = 1/2

B = 4

C = π/2

D = 0

Therefore, the amplitude is 1/2, the period is 2π/4 = π/2, and the phase shift is π/2.

Note that the negative sign in front of the function does not affect the amplitude, period, or phase shift. It simply reflects the function across the x-axis.

Sampled 200 delinquent credit card accounts instead of 100, the margin of error would decrease.

Sampled 200 delinquent credit card accounts, the margin of error for the sample mean at a 95% confidence level would be $80.164.

Smaller than the margin of error we found earlier for a sample size of 100.

The margin of error for the sample means at a 95% confidence level, we need to use the formula:
[tex]Margin of error = z\times (standard deviation / square root of sample size)[/tex]
[tex]z\times[/tex] is the z-score for the 95% confidence level, which is 1.96.
So, plugging in the given values, we get:
[tex]Margin of error = 1.96 \times  (578 / \sqrt 100)[/tex]
[tex]Margin of error = 1.96 \times 57.8[/tex]
Margin of error = 113.008
Therefore, the margin of error for the sample mean at a 95% confidence level is $113.008.
Repeated samples of 100 delinquent credit card accounts and computed the sample mean each time, we would expect the true population mean to be within $113.008 of our sample mean about 95% of the time.
The margin of error is inversely proportional to the square root of the sample size. So, as the sample size increases, the margin of error decreases.
To see this, let's plug in the new sample size into the margin of error formula:
[tex]Margin of error = 1.96 \times (578 / \sqrt 200)[/tex]
[tex]Margin of error = 1.96 \times 40.9[/tex]
Margin of error = 80.164

For similar questions on Margin

https://brainly.com/question/30404882

#SPJ11

The expression that gives the area as a function of the width is 4w²+3w.( option B)

The area of a shape is the space occupied by the boundary of a plane figures like circles, rectangles, and triangles.

The area of a rectangle is expressed as ;

A = l×w, where l is the length and w is the width.

Since the length is 3 inches more than four times the width, then;

l = 3+4w

Representing 3+w for l in the area formula, then we have;

A = (3+4w)(w)

A = 4w²+3w

therefore the expression that represents the area is 4w²+3w

learn more about area of rectangle from

https://brainly.com/question/2607596

#SPJ1

The expression that represents the total price of buying g pounds of grapes, b pounds of bananas, and p pounds of pears is Total cost = $2.19g + $0.59b + $1.49p

In this case, we need to use the given prices per pound of each fruit to calculate the total cost of purchasing a certain amount of each fruit. We can do this by multiplying the price per pound by the number of pounds of each fruit we want to buy, and then adding up these values.

So, to create the expression, we can start by using the given prices to calculate the cost of each fruit:

Grapes: $2.19/pound

Bananas: $0.59/pound

Pears: $1.49/pound

Next, we can use the variables g, b, and p to represent the number of pounds of each fruit we want to buy. We then multiply each price by its respective variable to get the cost of each type of fruit:

Cost of grapes: $2.19/g x g = $2.19g

Cost of bananas: $0.59/b x b = $0.59b

Cost of pears: $1.49/p x p = $1.49p

Finally, we can add up the costs of all three types of fruit to get the total cost:

Total cost = $2.19g + $0.59b + $1.49p

To know more about expression here

https://brainly.com/question/14083225

#SPJ4

The total number of non-empty subsets s of[tex]{1, 2, 3, . . . , 8}[/tex] such that the product of the elements of s is at most 200 is:
[tex]255 - (127 + 63 + 31) + 2 = 36.[/tex]
So, there are 36 such subsets.

Number of non-empty subsets s of[tex]{1, 2, 3, . . . , 8}[/tex] such that the product of the elements of s is at most 200, we can use a method called inclusion-exclusion principle.
First, we need to count the total number of non-empty subsets of the given set.

Since each element can either be included or excluded, there are [tex]2^8 - 1 = 255[/tex] non-empty subsets.
Next, we need to count the number of subsets whose product is greater than 200.

We can start by considering the subsets that contain 8, since 8 is the largest element in the set.

There are only two such subsets: {8} and {1, 8}.

Both of these subsets have a product greater than 200. Similarly, we can consider subsets that contain 7, and so on. We find that there are[tex]2^7 - 1 = 127[/tex] subsets that contain 7, and each of these subsets has a product greater than 200. Similarly, there are [tex]2^6 - 1 = 63[/tex] subsets that contain 6, and each of these subsets has a product greater than 200.
Double-counted the subsets that contain both 6 and 7, as well as those that contain both 6 and 8, and those that contain both 7 and 8.

Subtract the number of subsets that contain both 6 and 7, both 6 and 8, and both 7 and 8.

There are [tex]2^5 - 1 = 31[/tex] subsets that contain both 6 and 7, and each of these subsets has a product greater than 200.

Similarly, there are[tex]2^5 - 1 = 31[/tex] subsets that contain both 6 and 8, and each of these subsets has a product greater than 200.

Finally, there are [tex]2^5 - 1 = 31[/tex] subsets that contain both 7 and 8, and each of these subsets has a product greater than 200.
However, we have subtracted too much, since we have now excluded subsets that contain all three of 6, 7, and 8. There are only two such subsets: {6, 7, 8} and {1, 6, 7, 8}. Both of these subsets have a product greater than 200.

For similar questions on subsets

https://brainly.com/question/28705656

#SPJ11

To find the number of non-empty subsets s of {1, 2, 3, . . . , 8} such that the product of the elements of s is at most 200, we can use the concept of power set and combinatorics. By analyzing the pattern, we can determine that there are a total of 120 subsets whose product is at most 200.

To find the number of non-empty subsets s of the set {1, 2, 3, . . . , 8} such that the product of the elements of s is at most 200, we can use the concept of power set and combinatorics. The power set of a set is the set of all its subsets. We know that the number of elements in the power set of a set with n elements is 2n. In this case, we have 8 elements in the set, so the power set will have 28 = 256 subsets. However, we need to find the number of subsets with a product at most 200.

We can analyze the products of all subsets to determine the count.

By analyzing the pattern, we can determine that there are a total of 120 subsets whose product is at most 200. This can be calculated by summing the total number of subsets for each number of elements (1-element subsets + 2-element subsets + 3-element subsets + ... + 8-element subsets).

https://brainly.com/question/33319261

#SPJ12

Answer:

4. Mean: 89

5. Median: 90

6. Mode: None.

Step-by-step explanation:

To find the mean, add all of the numbers, then divide by the total.

There are 7 numbers in this set.

First, add all of the numbers. Then, divide the sum by 7.

[tex]85+95+88+93+94+78+90= 623\\623/7 =89[/tex]

The mean of this data set is 89!

------------------------------------------------

Now, let's find the median.

The median is the "middle number" of the data set.

First, put all of the numbers in order from least to greatest.

85, 95, 88, 93, 94, 78, 90

↓

78, 85, 88, 90, 93, 94, 95,

The number in the middle of the data set is 90!

Therefore, the median is 90.

------------------------------------------------

Now, let's find the mode.

The mode is the number that appears most frequently.

85, 95, 88, 93, 94, 78, 90

Since each number appears once, then there is no mode.

Let me know if you have any questions.

Given statement: The rule of thumb for estimating the time of completion is 1.5 times what you originally think it will be.

Given statement is True.

The reason for this rule of thumb is that tasks often take longer than initially estimated due to unforeseen challenges, dependencies, and other factors that can cause delays.

By estimating the time of completion as 1.5 times the original estimate, you are accounting for these potential delays and allowing for a more realistic timeline.

This rule of thumb is not a hard and fast rule, and there will be cases where tasks take less or more time than 1.5 times the original estimate. However, it can be a helpful guideline for project planning and resource allocation, as it helps to ensure that sufficient time and resources are allocated to complete tasks within a realistic timeframe.

For similar question on estimating.

https://brainly.com/question/597381

#SPJ11

The distance between the two points can be found to be, and the number that goes beneath the radical symbol is 80.

To find the distance between two points in a plane, you can use the distance formula derived from the Pythagorean theorem. The distance formula is:

d = √[(x₂ - x₁)² + (y₂ - y₁)²]

where (x₁, y₁) and (x₂, y₂) are the coordinates of the two points.

In this case, the coordinates of the two points are (-4, 1) and (4, 5). So, x₁ = -4, y₁ = 1, x₂ = 4, and y₂ = 5.

Now, apply the distance formula:

d = √[(4 - (-4))² + (5 - 1)²]

d = √[(8)² + (4)²]

d = √(64 + 16)

d = √80

Find out more on distance at https://brainly.com/question/7243416

#SPJ1

Therefore, the solution is equation (x, y) = (52/7, -10/7).

To solve the system of equations by elimination, we need to eliminate one of the variables. We can do this by multiplying one or both equations by a constant to create opposite coefficients for one of the variables. Then, we can add or subtract the equations to eliminate that variable and solve for the other variable. Here's how to solve the given system of equations:

Multiply the first equation by 3 and the second equation by 2 to create opposite coefficients for y:

[tex]3(x - 2y = 12) - > 3x - 6y = 36[/tex]

[tex]2(-5x + 3y = -44) - > -10x + 6y = -88[/tex]

Add the equations to eliminate y:

[tex]3x - 6y + (-10x + 6y) = 36 + (-88)[/tex]

[tex]-7x = -52[/tex]

Solve for x by dividing both sides by -7:

[tex]x = 52/7[/tex]

Substitute x = 52/7 into either equation to solve for y. Using the first equation:

[tex]52/7 - 2y = 12[/tex]

[tex]-2y = 12 - 52/7[/tex]

[tex]-2y = 72/7 - 52/7[/tex]

[tex]-2y = 20/7[/tex]

[tex]y = -(10/7)[/tex]

Check the solution by substituting the values of x and y into both equations:

[tex]x - 2y = 12 - > 52/7 - 2(-10/7) = 12 (true)[/tex]

[tex]-5x + 3y = -44 - > -5(52/7) + 3(-10/7) = -44 (true)[/tex]

Therefore, the solution is (x, y) = (52/7, -10/7).

To know more about equation visit:

https://brainly.com/question/10413253

#SPJ1

Answer:

f(x) is the blue graph, g(x) is the red graph.

x^2 - 3x + 17 - (2x^2 - 3x + 1) = 16 - x^2

16 - x^2 = 0 when x = -4, 4

So the area between these two graphs is (using the TI-83 graphing calculator):

fnInt (16 - x^2, x, -4, 4) = 85 1/3

The model have 4 degrees of freedom if a regression model has a sample of 30 observations using a dependent variable, 3 independent variables, and a constant.

In a linear regression model, the degrees of freedom for the model are calculated as the number of independent variables plus one (for the constant or intercept term). Therefore, in this case, since the model has 3 independent variables and a constant, the degrees of freedom for the model would be 3 + 1 = 4.

The degrees of freedom for the model represent the number of parameters estimated from the data to build the model. These parameters are the coefficients or weights of the independent variables and the constant term.

The degrees of freedom for the model are used to calculate the F-statistic, which is a measure of the overall significance of the regression model. The F-statistic is calculated as the ratio of the explained variance to the unexplained variance of the model, and it is compared to the F-distribution with degrees of freedom (k, n-k-1), where k is the number of independent variables and n is the sample size.

To know more about regression model here

https://brainly.com/question/16972231

#SPJ4