Answer:
The specific purpose for the design of the TM9400 P25 Mobile is its use for efficient communication with other emergency-handling jurisdictions, especially in challenging environments.
When a law enforcement officer requires a dedicated mobile network for communication in emergency situations, the TM9400 P25 Mobile comes handy. It enables the officer to communicate under multiple operational modes from remote locations.
Encryption, together with its high quality audio and rugged build, ensures the durability of the TM9400 P25 Mobile.
The ability to communicate from many places, embedded into its interoperability, allows different law enforcement jurisdictions to seamlessly exchange intelligence. It also has remote network management features, which enhance its spectral efficiency and effectiveness.
Explanation:
The TM9400 P25 Mobile is a high-performance, flexible, and robust radio specially designed for emergency situations. It is widely used by law enforcement officers to communicate with others from remote locations.
Things are created to meet a purpose. The Tait TM9400 is known to be a very high-performing, flexible and robust mobile. It was set up for use in difficult environments while helping to give high quality audio and brilliant operation to the first responders all over the world.
The purpose of TM9400 P25 mobile designed is Challenging environment for effective communication use along with other emergency-handling cases.
It is often used by law enforcement officer because of emergency situation as it comes in handy. It helps the officer to communicate under a lot of operational modes from remote areas.
Learn more about Phones from
https://brainly.com/question/917245
You work for a large company that has over 1000 computers. Each of these computes uses a wireless mouse and keyboard. Therefore, your company goes through a lot of alkaline batteries. When these batteries can no longer power the intended device, you must decide what to do with them. Unless otherwise dictated by your local authorities, which of the following would be the EASIEST way to deal with these batteries?
They must be sent to hazardous waste collection
a. They can be recharged.
b. They must be stored onsite until they expire
c. They can be thrown in the trash.
The answer to this question is, "They can be thrown in the trash."
Explanation: This is because it specifies how to get rid of them UNLESS local authorities have told you otherwise.
Imagine running a 64-bit system on a 32-bit system, where we simulate a single 64- bit memory location (register) using two atomic 32-bit memory locations (registers). A write operation is implemented by simply writing the first 32-bits of the simulated 64-bit register in the first real register, then the second 32-bits in the second real register. A read, similarly, reads the first half from the first register, then the second half from the second register, and returns the concatenation. What is the strongest property that this 64-bit register satisfies: safe, regular, or atomic
Answer:
It's not possible to ensure memory access occurs indivisibly when it has to broken into multiple operations. Unfortunately, the fact that your application is running on a 64-bit kernel does not change the equation any - it is actually running in a compatibility layer and has none of the benefits of x64
Explanation:
Why do organizations need to tailor project management concepts, such as those found in the PMBOK® Guide, to create their own methodologies?
Explanation:
Although each project is different and unique, according to the Method Statement of PMBoK, customising is required. Not that every procedure, tool, methodology, input, or output listed in the PMBoK Guide is mandated for every project. Scope, timeline, cost, materials, quality, and danger should all be considered while tailoring.
A computer can manipulate symbols as if it understands the symbols and is reasoning with them, but in fact it is just following cut-and-paste rules without understanding why. This means that:
Answer:
The symbols may or may not have meaning, but the machine does not need to know how the symbols are interpreted in order to manipulate the symbols in the right way.
Explanation:
The computer can change the symbols in the case when the computer understand but in actual following the cut-paste rules without having any understanding this is because the symbols might be have meaning or not but if we talk about the machine so actually they dont know how the symbols are interpreted and how it can be used so that it can be change in the accurate way
Which term refers to a cloud-native, streamlined technology for hosting cloud-based applications, where a server runs for short bursts only when needed by an application or service
Answer:
Serverless computing.
Explanation:
Cloud computing can be defined as a type of computing that requires shared computing resources such as cloud storage (data storage), servers, computer power, and software over the internet rather than local servers and hard drives.
Generally, cloud computing offers individuals and businesses a fast, effective and efficient way of providing services.
Cloud computing comprises of three (3) service models and these are;
1. Platform as a Service (PaaS).
2. Infrastructure as a Service (IaaS).
3. Software as a Service (SaaS).
The three (3) main characteristics of cloud computing are;
I. Measured service: it allows cloud service providers to monitor and measure the level of service used by various clients with respect to subscriptions.
II. Resource pooling: this allows cloud service providers to serve multiple customers or clients with services that are scalable and provisional.
III. Elasticity: this is the ability of the cloud computing service to be flexible and adaptive to the traffic or requests from the end users.
Serverless computing is a term which refers to a cloud-native and streamlined technology that is designed typically for hosting cloud-based applications, in which a server operates for short bursts only when needed by an application or service. Serverless computing is used for the allocation of machine resources on demand.
what is internet? explain help pliz
The Internet, sometimes called simply "the Net," is a worldwide system of computer networks -- a network of networks in which users at any one computer can, if they have permission, get information from any other computer (and sometimes talk directly to users at other computers).
Select all phrases that describe a server-based network. centralized network security easy to expand log-ins controlled by central server unlimited number of users network resources stored on individual workstations
Answer:
Client Server Network ... is the central computer that enables authorized users to access networked resources ... computers in this type of network are connected to a central hub ... why might a business choose a server based network (3) ... 2) easier to expand ... external hardware connected to and controlled by a computer.
Explanation:
Answer
Explanation:
what the other person said
Project: You are Tech Support
Answer:
no but call a big company
A network consists of 75 workstations and three servers. The workstations are currently connected to the network with 100 Mbps switches, and the servers have 1000 Mbps connections. Describe two network problems that can be solved by replacing the workstations' 100 Mbps switches and NICs with 1000 Mbps switches and NICs. What potential problems can this upgrade cause
Answer:
A) i) starvation ii) flow control
B) Network congestion
Explanation:
A) Network problems that can be addressed / solved
By replacing the workstations 100 Mbps switches with 1000 Mbps switches the problem of
Starvation; been faced by the servers due to the delay in sending data to be processed by the servers from the workstations will be resolved .
Flow control : The huge difference in the speeds of the workstations and servers causes a network buffer which leads to packet loss therefore when the workstations 100 Mbps switch is replaced with 1000 Mbps switch this network problem will be resolved
b) The potential problem that can be encountered is Network Congestion
8. (a) Write the following statements in ASCII
A = 4.5 x B
X = 75/Y
Answer:
Explanation:
A=4.5*B
65=4.5*66
65=297
1000001=11011001
10000011=110110011(after adding even parity bit)
X=75/Y
89=75/90
10011001=1001011/1011010
100110011=10010111/10110101(after adding even parity bit)
What is the default join type? inner self join left outer right outer
Answer: inner
Explanation: on edg
Answer:
inner
Explanation:
just did it on Edg
hardware and costs of adding two levels of hardware RAID. Compare their features as well. Determine which current operating systems support which RAID levels. Create a chart that lists the features, costs, and operating systems supported.
Explanation:
1. Redundant batch of Inexpensive Drives (or Disks) (RAID) is a term for data storage schemes that divide and/or replicate data amid multiple hard drives.
2. RAID can be designed to provide increased data accuracy or increased Input/Output performance
Hardware RAID exists as a customized processing system, utilizing various controllers or RAID cards to control the RAID design independently from the OS. Software RAID utilizes the processing capacity of that computer's operating system in which the RAID disks exists installed.
What are the two types of RAID?
We have two kinds of RAID implementation through. Hardware and Software. Both these implementation contains its own benefits and drawbacks.
Software RAID does not count any cost for a RAID controller and exists fairly effortless to estimate the cost of as you exist only buying additional drives. All of our usual dedicated servers come with at least two drives, indicating there exists NO cost for software RAID 1, and stands positively suggested. It exists positively suggested that drives in a RAID array be of the exact type and size. With RAID 0 or RAID 1, you'd require at least two drives, so you would require to buy one additional drive in most cases. With RAID 5 you'll require at least three drives, so two additional drives, and with RAID 6 or 10 you'd require at least four total drives. To earn additional implementation, redundancy, or disk space, you can count more disks to the collections as well.
To learn more about two types of RAID
https://brainly.com/question/19340038
#SPJ2
2. What is software conflict?
Answer:
A problem that occurs when two programs cannot run in the same computer at the same time. It is generally due to a programming bug and typically manifests when two programs compete for the same resource (memory, peripheral device, register, etc.).
Hope it helps out!
Explanation:
b) Set of strings of 0s and 1s whose 5th symbol from left is 1.
Answer:
...?
Explanation:
With the addition of electric cars, we have a need to create a subclass of our Car class. In this exercise, we are going to create the Electric Car subclass so that we can override the miles per gallon calculation since electric cars don’t use gallons of gas.
The Car class is complete, but you need to complete the ElectricCar class as outlined in the starter code with comments.
Once complete, use the CarTester to create both a Car and ElectricCar object and test these per the instructions in the CarTester class.
Classes
public class CarTester
{
public static void main(String[] args)
{
// Create a Car object
// Print out the model
// Print out the MPG
// Print the object
// Create an ElectricCar object
// Print out the model
// Print out the MPG
// Print the object
}
}
////////////////////////////
public class ElectricCar extends Car {
// Complete the constructor
public ElectricCar(String model){
}
// Override the getMPG here.
// It should return: "Electric cars do not calculate MPG.
// Override the toString() here.
// (model) is an electric car.
}
//////////////////////////////////
public class Car {
//This code is complete
private String model;
private String mpg;
public Car(String model, String mpg){
this.model = model;
this.mpg = mpg;
}
public String getModel(){
return model;
}
public String getMPG(){
return mpg;
}
public String toString(){
return model + " gets " + mpg + " mpg.";
}
}
Select the correct answer.
What should you keep in mind when picking a topic for a research paper?
ОА.
choosing a general topic
OB.
choosing a topic that is relatively new
O C.
choosing a specific topic rather than a broad one
OD. choosing a topic based on the most number of sources you can find
Reset
Next
Answer: The answer is C
Explanation: When it comes to research papers your topic shouldnt be too broad. Your topic should be broad enough you can find a good amount of information but not too focused that you can't find any information.
Write a function called csv_sum that takes a filename and returns the sum of all of the numbers in the file. The numbers are in csv format. For instance, if the contents of the file are: 12,3,2 -5 10,20,-10,8.3 Then the function should return 40.3.
Answer:
Explanation:
def csv_sum(filename):
total = 0
try:
f = open(filename)
for line in f:
words = line.strip().split(",")
for word in words:
total += float(word)
f.close()
except FileNotFoundError:
pass
return total
Which statement describes Augmented Reality (AR) technology?
Answer:
Augmented Reality (AR) superimposes images and audio over the real world in real time. It does allow ambient light and does not require headsets all the time.
yan po ang szgot
wala po kasi pagpipilian
HOPE IT HELPS
pls follow ke
An OpenCL Device is composed of: Group of answer choices Command Queues Platforms Processing Elements Compute Units
Answer:
Compute Units
Explanation:
A platform can be defined as a computing environment for building and executing sets of code in a software application or program such as an application programming interface (API).
The two parts of the platform used to run an application software are both hardware and software (operating system).
Machine and assembly are referred to as a low level programming language used in writing software programs or applications with respect to computer hardware and architecture. Machine language is generally written in 0s and 1s, and as such are cryptic in nature, making them unreadable by humans but understandable to computers.
OpenCl is an abbreviation for open computing language that runs on CUDA-powered graphics processing units (GPUs). An OpenCL Device is composed of compute units and an OpenCl compute unit typically comprises of processing elements.
Write the C++ code (NOT a full program) that prompts the user to enter 50 numbers and fills the array guestCount with these 50 numbers, so that the first number input is in the first element of the array, the second input in the second element, etc.
Answer:
The code is as follows:
int guestCount[50];
for(int i = 0; i<50;i++){
cout<<"guestCount "<<i+1<<": ";
cin>>guestCount[i];
}
Explanation:
This declares the array
int guestCount[50];
This iterates through the array (50 elements)
for(int i = 0; i<50;i++){
This prompts the user for each array element
cout<<"guestCount "<<i+1<<": ";
This gets the input from the user
cin>>guestCount[i];
}
You wish to traverse a binary search tree in sorted order using pre order traversal. Arrange the following actions in the correct order to accomplish this. I Print the right subtree recursively II Print the root III Print the left subtree recursively
Answer:
II Print the root
III Print the left subtree recursively
I Print the right subtree recursively
Explanation:
The question illustrates binary search in data structure.
When preorder is applied to a binary search, the search starts by visiting the root node, then proceed to the visiting the left most nodes and finally, the left nodes will be visited.
Using the above illustration, the arrangement of the actions in ascending order is: II, III and I
George has a set of software programs installed on his computer to create a digital portfolio. He is not sure what each program does. Help George by matching the software to their purposes
Explanation:
I thinkcreating and edditing Images matchs to adobePhotoshop
Microsoft word is for adding and Creating text document
Creating andeditingpage layout -Adobe In Design
Desktop Publication-QuarkQuark Xpress
I hope thishelp and If wrong Inform me
Good luck
Answer:
This is the answer based off of the notes
Explanation:
PLEASE HELP ASAP!!
This command allows you to duplicate text from one part of a document while keeping the original text.
Cut
Copy
Format
Paste
Answer: CTRL + C or copy and paste
Explanation: to copy and paste highlight text by dragging mouse or clicking on touchpad and holding over selected text, if not on a computer but on a touch screen device ( ex: Phone, iPad etc) hold down until it is blue use the tear drops from the top and bottom to highlight the text you need. Then hold down the blue area until options come up stop holding and select copy and then go to where you want to put the text and hold down again and select paste. If on computer drag cursor over text while holding down on left click or holding down on touchpad, it will highlight light blue then left click or click on the touchpad with both fingers and repeat the process of copying and pasting as said before.
Hope this helps! :)
1-How many moles of NazCOs are in 10.0 ml of a 2.0 M solution?
Answer:
A solution is a mixture in which the particles are so small that the components are indistinguishable from each other. The amount of the solute and the solvent in a solution can be expressed in terms of different concentration expressions such as molarity, morality, etc.
Explanation:
To calculate the number of moles of sodium carbonate, the volume in liters will be multiplied by the molar concentration of the solution.
moles Na2CO3 = 2.0 M x 0.0100 L = 0.020 moles Na2CO3
Hope it helps :)
Answer:
There are 20. mol of Na2CO3 in 10.0L of 2.0M solution.
Explanation:
Molarity is represented by this equation:
(look at attachment)
In our case, we already have the molarity and volume of solution, both of which have good units.
Let's rearrange the equation to solve for the number of moles. We can do this by multiplying by L solution on both sides of the equation. The L solution will cancel out on the right side, leaving the number of moles being equal to the molarity times volume:
Moles of solute
=Lsolution×Molarity
Now we just plug the known values in!
Moles of solute = (10.0 L) (2.0M) = 20. moles
help me guys plssssss
Answer The answer is
So hope this was helpful
Explanation:
An ISA specifies a word size of 8 bytes, byte addressability, and an address space of 256 K; it uses single-word instructions (i.e. each instruction is a single 8 byte word). What is the size of the MAR
Answer:
2 bytes
Explanation:
Size of the MAR ( memory address register ) = 18 bits = 2 bytes
Given that
address space = 256 K = 2^8
number of address location= 2^8 * 2^10 ( where 1K = 2^10 )
= 2^18
Given the number of address location = 2^18 ;
Hence 18 bits are required to store the address of the instruction
When adding several user accounts, you might want to use the newusers utility, which can process a text file full of entries to add user accounts. Use the man or info page to find out how to use this utility, and use it to add three users. When finished, view the /etc/passwd, /etc/shadow, and /etc/group files to verify that the users were added successfully.
Explanation:
Given - When adding several user accounts, you might want to use the new users utility, which can process a text file full of entries to add user accounts.
To find - Use the man or info page to find out how to use this utility, and use it to add three users.
Proof -
New Users Utility:
It is an utility which reads the file full of usernames and clear text passwords.
It then uses this information to update a group of the existing users to create new users.The format of the file consists of specified things like:
pw - passwd
pw - age
pw - gid
pw - dir
Use of the Utility:
The command is new users filename
The file should look like -
(Username : Password : UID : GID : User Information : Home Directory : Default Shell)
where ,
UID = User Identifier
GID = Group Identifier
Testing the Users:
Creating users from the file given above test User 1, directory Of File
Executing the create user new users directory Of File
Repeat this step to undergo all the users that are been noted down in the file to make them a user in the noted group policy.
Hence,
These are the steps of using the new Users utility.
Write a MY SQL query to display the name and hire date of all employees who were hired in 1992.
Answer:
Select * from Employees where LastName LIKE '%H%' or LastName LIKE '%A%' or LastName LIKE '%Z%' order by Hiredate(or whatever you put for your year name) desc;
Explanation:
Create a dynamic array of 100 integer values named myNums. Use a pointer variable (like ptr) which points to this array. Use this pointer variable to initialize the myNums array from 2 to 200 and then display the array elements. Delete the dynamic array myNums at the end. You just need to write part of the program.
Answer:
The required part of the program in C++ is as follows:
int *ptr;
int *myNums = new int(100);
srand (time(NULL));
for (int i = 0; i < 100; i++) {
myNums[i] = rand() % 200 + 2; }
ptr = myNums;
cout << "Output: ";
for (int i = 0; i < 100; i++) {
cout <<*(ptr + i) << " "; }
delete[] myNums;
Explanation:
This declares a pointer variable
int *ptr;
This declares the dynamic array myNums
int *myNums = new int(100);
This lets the program generate different random numbers
srand (time(NULL));
This iterates through the array
for (int i = 0; i < 100; i++) {
This generates an integer between 2 and 200 (inclusive) for each array element
myNums[i] = rand() % 200 + 2; }
This stores the address of first myNums in the pointer
ptr = myNums;
This prints the header "Output"
cout << "Output: ";
This iterates through the pointer
for (int i = 0; i < 100; i++) {
Print each element of the array, followed by space
cout <<*(ptr + i) << " "; }
This deletes the dynamic array
delete[] myNums;
You designed a program to create a username using the first three letters from the first name and the first four letters of the last name. Usernames cannot have spaces. You are testing your program with a user whose name is Jo Wen. What step in the program plan do you need to revisit
Answer:
See Explanation
Explanation:
The question would be best answered if there are options to select from; since none is provided, I will provide a general explanation.
From the question, we understand that, you are to test for Jo Wen.
Testing your program with this name will crash the program, because Jo has 2 letters (3 letters are required), and Wen has 3 letters (4 letters are required)
So, the step that needs to be revisited is when the username is generated.
Since the person's name cannot be changed and such person will not be prevented from registering on the platform, you need to create a dynamic process that handles names whose lengths are not up to the required length.