Answers
Answer:
The required elastic potential energy is 0.068J
Explanation:
Given,
Spring force constant, k= 3.4 N/M
Spring stretch length/ Displacement, x= 0.2m
We know,
Elastic potential energy, V= [tex]\frac{1}{2} kx^{2}[/tex]
=[tex]\frac{1}{2}*3.4*(0.2)^{2}[/tex]
=[tex]\frac{0.136}{2}[/tex]
=0.068
∴The required elastic potential energy is 0.068J
Related Questions
the degree of hotness and coldness of th body is.......
Answers
Answer:
Explanation:
The degree of hotness and coldness of the body is called temperature.
A positive charge is moving across a room from south to north. A magnetic field runs from east to west. In what direction is the magnetic force on the moving positive charge?
Answers
Answer:
the force is on the z axis, coming out of the blade
Explanation:
The direction of the magnetic force is given by the right hand rule,
For a positive charge, the thumb points in the direction of velocity, the other fingers extended in the direction of the magnetic field, and the palm points in the direction of force.
In this case.
Thumb points North
The fingers extended is in the east - west direction parallel to the blade
The palm is sticking out of the leaf, in the z direction
the answer is the force is on the z axis, coming out of the blade
(answer only if you know the answer or I'll report) Help me please solve it w steps
Answers
X component of force Fx=Fcos45=50×cos×45
Y component of force Fy=Fsin45=50×sin×45
A net force of 60 N north acts on an object with a mass of 30 kg. Use Newton's second law of
motion to calculate the amount of acceleration the object will experience. Then explain how the
amount of acceleration will change if the net force or the mass of the object increases.
Answers
Answer:
Explanation:
F = ma. For us, this looks like
60 = 30a and
a = 2 m/s/s
If the force goes up to, say, 90, then
90 = 30a and
a = 3...if the force goes up, the acceleration also goes up.
If the mass goes up to say, 60, and the force stays the same, then
60 = 60a and
a = 1...if the mass goes up, the acceleration goes down.
What would the axes be labelled on a graph that allows you to calculate VELOCITY?
Answers
And velocity Velocity
Jorge tightens a bolt on his bicycle with a wrench that is 0.20 m long. If he pulls perpendicularly on the end of the wrench with a force of 140 N, how much torque does he apply ?
Answers
Answer:
28Nm
Explanation:
Torque is expressed as the prduct of force and radius
Given
Force = 140N
radius = 0.20m
Torque = 140 * 0.2
Torque = 140 * 1/5
Torque = 28Nm
Hence the amouunt of torque applied is 28Nm
Describe the movements that occur along each of the three types of faults. Describe the movements that occur along each of the three types of faults.
Answers
Answer:
Explanation:
strike-slip, normal and thrust
mark her as brainiest, :) I don't need it :P
Einstein's theory of general relativity is currently the best explanation of gravity.Why has this theory not been replaced with a new one
Answers
Answer:
Option C, It still explains the experimental evidence pertaining to gravity
Explanation:
Please find the attachment
Answer:
A.) It will remain the best explanation, because no one has come up with a better one yet
Explanation:
If a roller-coaster car has 40,000 J of gravitational potential energy when at rest on the top of a hill, how much kinetic energy does it have when it is ½ of the way down the hill?
Answers
=============================================
Work Shown:
PE = potential energy
KE = kinetic energy
m = mass
g = acceleration of gravity
h = height of the object
PE = m*g*h = 40,000 joules
---------
If the car is halfway down the hill, then that means the height of the car is h/2 instead of h
We can then say:
m*g*(h/2) = (m*g*h)/2 = (40,000)/2 = 20,000 J
is the amount of potential energy at this location. The amount of kinetic energy must be the remaining amount that adds to this, to get 40,000 J again.
Put another way: The 40,000 J of PE to start off with, when KE = 0, means we have a total energy of 40,000 J
---------
So,
PE+KE = total energy
PE+KE = 40,000 J
20,000 J + KE = 40,000 J
KE = (40,000 J) - (20,000 J)
KE = 20,000 J when the car is halfway down the hill.
ik its a lot but can u help
Answers
Answer:
your correct ans is D.
object float in liquid when its density is less than liquid and sinks when its density is more than liquid..
stay safe healthy and happy.If 150 Joules of work is needed to move a box 1000 cm, calculate the force that was used?
Answers
Answer:
[tex] \large{ \tt{☄ EXPLANATION}} : [/tex]
We're provided : Work ( W ) = 150 J & Displacement ( D ) = 1000 cm & We're asked to find out the force that was used. Firstly, Notice that we're provided the unit of Displacement as centimetre so we have to convert 1000 cm into m. Displacement ( D ) = [tex] \frac{1000}{ 100} = 10[/tex] m[tex] \large{ \tt{♡ \: LET'S \: GET \: STARTED}} : [/tex]
Work is defined as the product of force and Displacement. By definition ,[tex] \large{ \boxed{ \tt{❃ \: WORK ( \: W \: ) = FORCE\: ( \: F) \times DISPLACEMENT \: ( \: D \: )}}}[/tex]
- Plug the values and then simplify !
[tex] \large{ \bf{↦ \: 150 = F \times 10}}[/tex]
[tex] \large{ \bf{↦F\times 10 = 150}}[/tex]
[tex] \large{ \bf{↦ \: F = \frac{150}{10}}} [/tex]
[tex] \large {\bf{↦F = \boxed{ \bf{15} \: N}}}[/tex]
[tex] \boxed{ \boxed{ \large{ \tt{✤ \: OUR \: FINAL \: ANSWER : \boxed{ \bf{15 \: n}}}}}}[/tex]
KEEP READING , KEEP STUDYING , KEEP WORKING , KEEP PUSHING , KEEP TAKING CARE OF YOURSELF. YOUR HARD WORK WILL PAY OFF ! ♪ツ Hope I helped ! ۵
☪ Have a wonderful day / evening ! ☼
# StayInAndExplore ! ☂
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Homer Agin leads the Varsity team in home runs. In a recent game, Homer hit a 34.5 m/s sinking curve ball head on, sending it off his bat in the exact opposite direction at 23.9 m/s. The actually contact between ball and bat lasted for 0.00075 seconds. Determine the magnitude of the average acceleration of the ball during the contact with the bat in m/s/s. Do not include units or /- sign. Round your answer to a whole number.
Answers
Answer:
–77867 m/s/s.
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 34.5 m/s
Final velocity (v) = –23.9 m/s
Time (t) = 0.00075 s
Acceleration (a) =?
Acceleration is simply defined as the rate of change of velocity with time. Mathematically, it is expressed as:
Acceleration = (final velocity – Initial velocity) /time
a = (v – u) / t
With the above formula, we can obtain acceleration of the ball as follow:
Initial velocity (u) = 34.5 m/s
Final velocity (v) = –23.9 m/s
Time (t) = 0.00075 s
Acceleration (a) =?
a = (v – u) / t
a = (–23.9 – 34.5) / 0.00075
a = –58.4 / 0.00075
a = –77867 m/s/s
Thus, the acceleration of the ball is –77867 m/s/s.
A beam of light hits a mirror at an angel of 35 degrees. What is the angel that it bounces off at?
a. 55 degrees
b. 35 degrees
c. 90 degrees
Answers
Answer:
c
Explanation:
light refraction is a right angle
Does a feather fall as fast as a rock in a vacuum? If so why?
Answers
Answer:
No.
Explanation:
A feather is less dense and thus less force exerted while a rock is very dense thus exerting more force .
pls help will mark brainliest, pls
Answers
Answer:
The answer is true. This is correct.
Physics class, need hell
Answers
Answer:
325.76 revolutions
Explanation:
The tire radius is diameter/2: 42/2 = 21
And now we can discover the lenght of the tire circumference. The lenght of a circumference is given by 2×radius×π, and let's consider π=3.14, and let's use the radius in meter (21 cm = 0.21 m):
2•0.21•3.14 = 1.32 m of lenght
Now, you divide the distance the car moved by the lenght of the tire circumference and you will find how many revolutions the tire makes:
420/1.32 = 325.76
A parallel combination of 3ohms and 4ohms resistor is connected in series with a resistor of 4ohms and a battery of negligible resistance. Calculate the effective resistance in the circuit
Answers
Answer:
Explanation:
Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .
R₁ = 3 x 4 / ( 3 + 4 )
= 12 / 7 = 1.7 ohms .
This equivalent resistance is connected with 4 ohms in series
Total resistance = 1.7 ohms + 4 ohms
= 5.7 ohms.
Hence effective resistance of the circuit = 5.7 ohms .
What is meant by denser medium?
Answers
Explanation:
jdjdjdkdixnxkakdjxjsjwosk
On what factors does critical velocity depend on
Answers
Explanation:
The critical velocity is that velocity of liquid flow, up to which its flow is streamlined (laminar)& above which its flow becomes turbulent. It's denoted by Vc & it depends upon: Coefficient of viscosity of liquid (η) Density of liquid. Radius of the tube.
What are some core features of waves in physics?
Answers
Answer:
Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.
Explanation:
which answer is it??
Answers
Answer:
hmm...
Explanation:
Answer: wave a has the higher ampllitude while wave b has the lower amplitude.
Explanation:
wave a has the amplitude of 4 while wave b has the amplitude of one
A 4kg and 5kg bodies moving on a frictionless horizontal surface at a velocity of ( -6i )m/s and ( +3 )m/s respectively. Collide a head on elastic collision. What is the velocity ( magnitude and direction) of the each body after collision?
Answers
Answer:
4 kg → +4 m/s
5 kg → -5 m/s
Explanation:
The law of conservation of momentum states that:
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'left side → velocities before collisionright side → velocities after collisionYou'll notice that we have two missing variables: v₁' & v₂'. Assuming this is a perfectly elastic collision, we can use the conservation of kinetic energy to set the initial and final velocities of the individual bodies equal to each other.
v₁ + v₁' = v₂ + v₂'Let's substitute all known variables into the first equation.
(4)(-6) + (5)(3) = (4)v₁' + (5)v₂' -24 + 15 = 4v₁' + 5v₂' -9 = 4v₁' + 5v₂'Let's substitute the known variables into the second equation.
(-6) + v₁' = (3) + v₂' -9 = -v₁' + v₂' 9 = v₁' - v₂'Now we have a system of equations where we can solve for v₁ and v₂.
-9 = 4v₁' + 5v₂' 9 = v₁' - v₂'Use the elimination method and multiply the bottom equation by -4.
-9 = 4v₁' + 5v₂' -36 = -4v₁' + 4v₂'Add the equations together.
-45 = 9v₂'-5 = v₂'The final velocity of the second body (5 kg) is -5 m/s. Substitute this value into one of the equations in the system to find v₁.
9 = v₁' - v₂'9 = v₁' - (-5) 9 = v₁' + 5 4 = v₁'The final velocity of the first body (4 kg) is 4 m/s.
We can verify our answer by making sure that the law of conservation of momentum is followed.
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂' (4)(-6) + (5)(3) = (4)(4) + (5)(-5)-24 + 15 = 16 - 25 -9 = -9The combined momentum of the bodies before the collision is equal to the combined momentum of the bodies after the collision. [✓]
What if the World turned to Gold?
Answers
Answer:
We would all freeze at close to absolute zero and gold will not be worth anything
Explanation:
Find the temperature of a mixture obtained by mixing 32 grams of water at a temperature of 22 degrees Celsius with 88 grams of water at a temperature of 75 degrees Celsius.
Answers
Answer:
60.87 °C
Explanation:
Applying,
Heat lost = heat gain
cm'(t₂-t₃) = cm(t₃-t₁).............. Equation 1
Equation 1 can futher be simplified to
m'(t₂-t₃) = m(t₃-t₁)................Equation 2
Where m' = mass of the hot water, m = mass of the cold water, t₁ = initial temperature of the cold water, t₂ = initial temperature of the hot water, t₃ = temperature of the mixture.
From the question,
Given: m' = 88 g, m = 32 g, t₁ = 22°C, t₂ = 75°C
Substitute these values into equation 2
88(75-t₃) = 32(t₃-22)
6600-88t₃ = 32t₃-704
32t₃+88t₃ = 6600+704
120t₃ = 7304
t₃ = 60.87 °C
which of the following is a vector physical quantity
a. speed
b. energy
c. mass
d. displacement
Answers
Answer:
D. displacement
Explanation:
Vector quantities have both magnitude and direction.
Scalar quantities have only magnitude.
20 POINTS:
Why does the initial hill of a roller coaster need to be steep?
Answers
Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity
Hope this helps! Good luck with future homework and exams!
Moving along the elevtromagnetic spectrum from low frequency to high frequency, what , if anything, happens to the wavelength?
wavelength get longer
wavelength remains constant
the wavelengths get shorter
wavelength eventually disappear altogether
Answers
Explanation:
the wavelengths get shorter
A forensics investigator discharged an assault rifle-replica such that the bullet fired at an angle of 30 (degrees) off the horizontal with an initial velocity
of 28
m/s northwest. What is the maximum height the bullet will reach?
O 14 m/s
10 m
O 30 km
O 0.4351 seconds
Answers
Answer:
Initial y-component of speed
Vy = 28 * sin 30 = 14 m/sec vertically
1/2 m Vy^2 = 2 m g h conservation of energy of y-component
h = Vy^2 / (2 * g) = 14^2 / (2 * 9.8) = 10 m
what is a product made from no renewable resources
Answers
Answer:
a nail
Explanation:
Answer:
crude oil, natural gas, coal, and uranium. These are all resources that are processed into products that can be used commercially.
Explanation:
The point A on the above graph is an example of
extrapolation
variation
interpolation
average method
Answers
Answer:
Interpolation
Explanation:
The graph shows that it falls between 2 values and interpolation means that you estimate the unknown values that fall between the 2 values. Hope this helps!
The data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Extrapolation is the process of extending a line connecting the data points beyond the given data points to make inferences based on the previous trend of the data set. This helps us to understand what will happen in the future if the trend continues in the same manner.
Interpolation is the process of determining an unknown variable between two known variables. In this process the data point is located within the line connecting the data points.
In this given graph, the data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Learn more here: https://brainly.com/question/11958294