Answer:
Haruki's boss Gabriel is right because there is no valid contract
Explanation:
Promissory estoppel is when a promise is made from one person to the other that can be relied upon.
This is however not a valid contract, but should be respected to avoid injustice.
A valid contract involves a written or expression of agreement about a particular thing. It involves offer and acceptance.
In this scenario a promise was made and since injustice cannot be established, Gabriel can decide not to honor the promise.
BOGO Inc. has two sequential processing departments, roasting and mixing. At the beginning of the month, the roasting department had 3,080 units in inventory, 70% complete as to materials. During the month, the roasting department started 21,600 units. At the end of the month, the roasting department had 4,800 units in ending inventory, 80% complete as to materials. Cost information for the roasting department for the month follows:
Beginning work in process inventory (direct materials) $ 4,870
Direct materials added during the month 45,900
Using the FIFO method, assign direct materials costs to the roasting department’s output—specifically, the units transferred out to the mixing department and the units that remain in process in the roasting department at month-end. (Do not round intermediate calculations.)
Answer:
Direct material cost of units transferred out = $42,596
Cost of ending work in process inventory = $8,174
Explanation:
This can be done using the following 3 steps:
Step 1: Calculation of equivalent unit of production (EUP) of materials
Note: See the attached excel file for the calculation of equivalent unit of production (EUP) of materials.
From the attached excel file, we have:
Physical unit = 24,680
EUP-material = 21,564
Step 2: Calculation of cost per EUP of materials
Cost per EUP of materials = Direct materials added during the month / EUP-Materials = $49,900 / 21,564 = $2.13
Step 3: Assignment of direct materials cost to the units transferred out amd the ending WIP
Cost of materials added to complete the beginning WIP = 924 * $2.13 = $1,967
Cost of units started and transferred out = 16,800 * $2.13 = $35,760
Direct material cost of units transferred out = Direct material cost of beginning WIP + Cost of materials added to complete the beginning WIP + Cost of units started and transferred out = $4,870 + $1,967 + $35,760 = $42,596
Cost of ending work in process inventory = 3,840 * $2.13 = $8,174
what is the bad side of profit motive?
Answer:
The profit motive that drives companies and individuals all too often gives way to greed. The power of leadership all too often gives way to elitist domination. The accumulation of wealth can look like excess or hoarding while income inequality increases in economies around the globe
On January 1, James Industries leased equipment to a customer for a five-year period, at which time possession of the leased asset will revert back to James. The equipment cost James $830,000 and has an expected useful life of seven years. Its normal sales price is $830,000. The residual value after five years is $200,000. Lease payments are due on December 31 of each year, beginning with the first payment at the end of the first year. The interest rate is 8%. (FV of $1. PV of $1. FVA of $1. PVA of $1. FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.)
Calculate the amount of the annual lease payments.
Answer:
James Industries
The amount of the annual lease payments is:
= $207,878.86.
Explanation:
a) Data and Calculations:
Cost of equipment = $830,000
Normal sales price = $830,000
Residual value after 5 years = $200,000
Interest rate = 8%
Lease period = 5 years
From an online financial calculator:
Loan Amount 830000
Loan Term 5 years
Interest Rate 8
Results:
Payment Every Year $207,878.86
Total of 5 Payments $1,039,394.29
Total Interest $209,394.29
Lease Payment Schedule:
Period PV PMT Interest FV
1 $830,000.00 $-207,878.86 $66,400.00 $-688,521.14
2 $688,521.14 $-207,878.86 $55,081.69 $-535,723.98
3 $535,723.98 $-207,878.86 $42,857.92 $-370,703.04
4 $370,703.04 $-207,878.86 $29,656.24 $-192,480.42
5 $192,480.42 $-207,878.86 $15,398.43 $0.00
A company is investing in a solar panel system to reduce its electricity costs. The system requires a cash payment of $118,982.50 today. The system is expected to generate net cash flows of $10,209 per year for the next 35 years. The investment has zero salvage value. The company requires an 7% return on its investments. 1-a. Compute the net present value of this investment. (PV of $1, FV of $1, PVA of $1, and FVA of $1) (Use appropriate factor(s) from the tables provided. Round your present value factor to 4 decimals.) 1-b. Should the project be accepted
Answer and Explanation:
The computation of the net present value is given below:
a.
As we know that
Net present value
= Annual cash inflows × PVIFA factor at 7% for 35 years - initial investment
= $10,209 × 12.9477 - $118,982.50
= $132,183.0693 - $118,982.50
= $13,200.57
Hence, the net present value is $13,200.57
b. Yes the project should be accepted as it net present value comes in positive amount
Discrimination in the workplace is against "the golden rule" and also
Answer:
Discrimination in the workplace is against "the golden rule" and also generates situations of tension and conflict within the work environment, which ends up affecting the labor production of each individual, and therefore the economic benefits of the company.
In other words, discrimination in the workplace not only has ethical and moral connotations, which implies an undeserved mistreatment of a person, but that, in the workplace, the conflict that such discrimination generates may end up affecting the company's own economic production or entrepreneurship.
Entry for Issuing Materials
Materials issued for the current month are as follows:
Requisition No. Material Job No. Amount
103 Plastic 400 $ 2,800
104 Steel 402 24,000
105 Glue Indirect 1,620
106 Rubber 403 3,200
107 Titanium 404 31,600
Journalize the entry to record the issuance of materials.
For a compound transaction, if an amount box does not require an entry, leave it blank.
Work in Process
Factory Overhead
Materials
Answer:
Journal entry to record the issuance of materials
Date Accounts & explanation Debit Credit
Work in process $61,600
(2,800+24,000+3,200+31,600)
Factory overhead $1,620
Material $63,220
(To record the issuance of material)
Assume Purity Ice Cream Company, Inc., in Ithaca, NY, bought a new ice cream production kit (pasteurizer/homogenizer, cooler, aging vat freezer, and filling machine) at the beginning of the year at a cost of $152,000. The estimated useful life was four years, and the residual value was $8,000. Assume that the estimated productive life of the machine was 16,000 hours. Actual annual usage was 5,500 hours in Year ; 3,800 hours in Year 2; 3,200 hours in Year 3; and 3,500 hours in Year 4.
Required:
1. Complete a separate depreciation schedule for each of the alternative methods. Round your answers to the nearest dollar.
Straight-line
2. Units-of-production (use two decimal places for the per unit output factor).
3. Double-declining-balance.
Answer:
A. Straight-line method
Year Depreciation Expense Accumulated Depreciation Net Book Value
Year 1 $36,000 $36,000 $116,000
Year 2 $36,000 $72,000 $80,000
Year 3 $36,000 $108,000 $44,000
Year 4 $36,000 $144,000 $8,000
B. Units of production method
Year 1 $49,500 $49,500 $102,500
Year 2 $34,200 $99,000 $68,300
Year 3 $28,800 $148,500 $39,500
Year 4 $31,500 $198,000 $8,000
C. Double-declining balance method
Year 1 $76,000 $76,000 $76,000
Year 2 $38,000 $152,000 $38,000
Year 3 $19,000 $228,000 $19,000
Year 4 $9,500 $304,000 $9,500
Explanation:
a. Calculation to Complete a separate depreciation using the straight line method:
STRAIGHT LINE METHOD
First step is to calculate the Depreciable value of the asset using this formula
Depreciable value of the asset = Total cost of asset - Estimated salvage value of asset
Let plug in the formula
Depreciable value of the asset= $152,000 - $8,000
Depreciable value of the asset= $144,000
Second step is to calculate the Depreciation rate per year
Depreciation rate per year = (1/4) * 100 year useful life
Depreciation rate per year = 25%
Third step is to calculate the Annual depreciation using this formula
Annual depreciation = Depreciable value x Depreciation rate per year
Let plug in the formula
Annual depreciation= $144,000 x 25%
Annual depreciation = $36,000
Now let Complete the Depreciation schedule
Year Depreciation Expense Accumulated Depreciation Net Book Value
At Acquisition $152,000
Year 1 $36,000 $36,000 $116,000
($152,000- $36,000=$116,000)
Year 2 $36,000 $72,000 $80,000
($152,000 - $72,000=$80,000)
Year 3 $36,000 $108,000 $44,000
($152,000 - $108,000=$44,000)
Year 4 $36,000 $144,000 $8,000
($152,000 - $144,000=$8,000)
b. Calculation to determine the depreciation using units of production method
UNITS OF PRODUCTION METHOD
First step is to calculate the Depreciation amount per year using this formula
Depreciation = ( Depreciable value of the asset x Annual usage of hours ) / Total estimated machine hours
Let plug in the formula
Year 1 = ($144,000 x 5,500 hours) / 16,000 hours Year 1 = $49,500
Year 2 = ($144,000 x 3,800 hours) / 16,000 hours
Year 2= $34,200
Year 3 = ($144,000 x 3,200 hours) / 16,000 hours
Year 3= $28,800
Year 4 = ($144,000 x 3,500 hours) / 16,000 hour Year 4= $31,500
Now let Complete the Depreciation schedule
Year Depreciation Expense Accumulated Depreciation Net Book Value
At Acquisition $152,000
Year 1 $49,500 $49,500 $102,500
($152,000 - $49,500=$102,500)
Year 2 $34,200 $99,000 $68,300
($152,000 - $99,000=$68,300)
Year 3 $28,800 $148,500 $39,500
($152,000 - $148,500=$39,500)
Year 4 $31,500 $198,000 $8,000
($152,000 - $198,000=$8,000)
c. Calculation to determine the depreciation using double-declining balance method
DOUBLE-DECLINING BALANCE METHOD
First step is calculate the Depreciation rate using this formula
Depreciation rate = 1/useful life * 100
Let plug in the formula
Depreciation rate = (1/4) * 100
Depreciation rate = 25%
Second step is to calculate the Depreciation per year using this formula
Double-declining balance = 2 x cost of the asset x Depreciation rate
Let plug in the formula
Year 1 depreciation = 2 x $152,000 x 25%
Year 1 depreciation = $76,000
Year 2 depreciation = 2 x ($152,000 - $76,000) x 25%
Year 2 depreciation = $38,000
Year 3 depreciation = 2 x ($152,000 - $76,000 - $38,000) x 25%
Year 3 depreciation = $19,000
Year 4 depreciation = 2 x ($152,000 - $76,000 - $38,000 - $19,000) x 25%
Year 4 depreciation = $9,500
Now let Complete the Depreciation schedule
Year Depreciation Expense Accumulated Depreciation Net Book Value
At Acquisition $152,000
Year 1 $76,000 $76,000 $76,000
($152,000-$76,000=$76,000)
Year 2 $38,000 $152,000 $38,000
($76,000+$76,000=$152,000)
Year 3 $19,000 $228,000 $19,000
($152,000+$76,000=$228,000)
Year 4 $9,500 $304,000 $9,500
($228,000+$76,000=$304,000)
Therefore the Complete a separate depreciation schedule for each of the alternative methods are:
A. Straight-line method
Year Depreciation Expense Accumulated Depreciation Net Book Value
Year 1 $36,000 $36,000 $116,000
Year 2 $36,000 $72,000 $80,000
Year 3 $36,000 $108,000 $44,000
Year 4 $36,000 $144,000 $8,000
B. Units of production method
Year 1 $49,500 $49,500 $102,500
Year 2 $34,200 $99,000 $68,300
Year 3 $28,800 $148,500 $39,500
Year 4 $31,500 $198,000 $8,000
C. Double-declining balance method
Year 1 $76,000 $76,000 $76,000
Year 2 $38,000 $152,000 $38,000
Year 3 $19,000 $228,000 $19,000
Year 4 $9,500 $304,000 $9,500
A consumer electronics company is in the process of evaluating whether it should pursue an internal development strategy or an external growth strategy. To make this decision, the management needs to assess whether the company's internal resources are superior to those of competitors in the targeted area. Which of the following strategic management models would be most useful in this assessment?
a. the core competence matrix.
b. the Boston Consulting Group (BCG) matrix.
c. the transaction-cost economics model.
d. the VRIO framework.
Answer:
Option d: The VRIO framework
Explanation:
The VRIO Framework?
This simply talks about (explains) and tells (predicts) firm-level competitive advantage. It is said to uncovers sustained competitive advantage.
VRIO is an acronym for a four-question framework which makes up the 4 components of the VRIO Framework. It includes;
1. Valuable
2. Rare
3. Costly to Imitate
4. Organized to Capture.
VRIO as Valuable means it has attractive features and has low cost and price in its design and build.
VRIO as Rare means only a few firms posses it.
VRIO as Costly to Imitate means that it is difficult to be developed or bought at a reasonable price.
VRIO as Organized to Capture means it exploit competitive potential.
Sophia just graduated from college. She just sold the furniture from her college apartment for $450 in cash. She just deposited $2,700 in graduation money into her checking account and has $7,500 saved in her savings account from working part-time. She charged gas and groceries to her credit card that she hasn't paid off yet. The total balance on her credit card is $179. Sophia has driven the same car since high school that is valued at $3,254. She doesn't have an auto loan. Her total student loan amount after graduating is $54,178. What is Sophia's net worth? (Do not include the $ sign or commas in your answer).
Answer:
Sophia's Net Worth
Sophia's net worth is:
= ($40,453).
Explanation:
a) Data and Calculations:
Assets:
Proceeds from sale of furniture = $450
Checking account deposit = 2,700
Savings account 7,500
Car 3,254
Total assets $13,904
Liabilities:
Credit card $179
Student loan after graduating 54,178
Total liabilities $54,357
Sophia's net worth = ($40,453)
b) Sophia's net worth is in the negative because of the student loan. This implies that she is in debt. A negative net worth simply means that Sophia owes more than she owns. In other words, Sophia's liabilities exceed her assets' value.
Select the correct example of a "benefits received" tax.
OA. Income tax.
OB. The tax that is collected at a toll booth on a highway.
Answer:
I’m thinking it’s A. But I’m not for sure
Explanation:
I looked it up ;)
To be included in property, plant, and equipment, an asset must have all of the following except Group of answer choices a. the asset must be held for use. b. the asset must have an expected life of a normal operating cycle. c. the asset must be tangible in nature. d. the asset must have an expected life of more than one year. g
Answer:
b. the asset must have an expected life of a normal operating cycle.
Explanation:
A current asset can be defined as all of the assets that are being owned by a company or business entity and are expected to be converted into their cash equivalent through sales or use within a period of one year of its date on the organization's balance sheet.
Hence, to be included in property, plant, and equipment, an asset must have all of the following;
I. The asset is expected or required to be held for use
II. It must be tangible in nature.
III. It is required to have an expected life of that is typically above a year.
Which of the following is a gauge used to measure distance traveled?
Answer:
please give me brainlist and follow
Explanation:
An odometer or odograph is an instrument used for measuring the distance traveled by a vehicle, such as a bicycle or car. The device may be electronic, mechanical, or a combination of the two (electromechanical).
What is the first phase of the project process?
A. Monitoring
B. Pre-Planning
C. Implementation
D. Planning
Answer:Pre-planning
Explanation:
Answer:
Explanation:
Implementation and Monitoring are latter phases of a project. Pre-planning goes before Planning so the answer is B.
"When auto manufacturer BMW purchased the Rollsminus Royce brand name, BMW had to hire and train a new staff of assembly workers. The new workers were paid $27 per hour, worked a total of 7,200 hours, and produced 2,100 cars. BMW budgeted for a standard labor rate of $32 per hour and 3.50 direct labor hours per car. What is the direct labor rate variance for the Rollsminus Royce division?"
Answer:
See now
Explanation:
With regards to the above, direct labor rate variance is computed as;
Direct labor rate variance
= Actual cost - Standard cost of actual hours
= [(7,200hours × $27) - (7,200 hours × $32)]
= $194,400 - $230,400
= $36,000 favorable
Therefore , direct labor rate variance i s $36,000 favorable
A fierce debate exists between policymakers as to whether or not they should use monetary and fiscal policies to stabilize small fluctuations in the economy. Please determine which of the given statements could be used to support using policy to stabilize the economy and which might be used against such choices. In favor of using policy Not in favor of using policy
Answer:
Hello the options related to your question is missing attached below are the missing options
answer :
In favor of using policy
Fiscal policy can be used to cut spending and rein in excessive aggregate demand. This controls inflationPolicy makers can expand the money supply in order to increase aggregate demandNot in favor of using policy
Fiscal policy, in particular is subject to long delays in the political process, which can affect its usefulnessMonetary and fiscal policy only take effect after a long lagBecause of the imprecision of economic forecasting, policy makers may end up causing more harm to the economy than goodExplanation:
Fiscal policy is simply the use of government, taxing and spending policy to influence the economic conditions of the country positively over time. and it can come in either ways. i.e. increase in government spending or lowering taxes by the government
In favor of using policy
Fiscal policy can be used to cut spending and rein in excessive aggregate demand. This controls inflationPolicy makers can expand the money supply in order to increase aggregate demandNot in favor of using policy
Fiscal policy, in particular is subject to long delays in the political process, which can affect its usefulnessMonetary and fiscal policy only take effect after a long lagBecause of the imprecision of economic forecasting, policy makers may end up causing more harm to the economy than goodMarshall Welding Company has two service departments (Cafeteria and Human Resources) and two production departments (Machining and Assembly). The number of employees in each department follows. Cafeteria 20 Human Resources 30 Machining 100 Assembly 150 Marshall Welding uses the step-down method of cost allocation and allocates cost on the basis of employees. Human Resources cost amounts to $1,200,000, and the department provides more service to the firm than Cafeteria. How much Human Resources cost would be allocated to Cafeteria
Answer: $88,889
Explanation:
Based on the information given in the question, the cost of Human Resources that would be allocated to Cafeteria will be calculated thus:
Number of employees (Human Resources to departments)
= 20 + 100 + 150
= 270 employees
The Human Resources cost would be allocated to Cafeteria will be:
= $1,200,000 / 270 x 20
= $88,889
it is taking the possession of an asset by purchase
Answer:
A purchase means to take possession of a given asset, property, item or right by paying a predetermined amount of money for the transaction to be completed successfully. In other words, its' an exchange of money for a particular good or service.
Ruiz Co. provides the following unit sales forecast for the next three months: January February March Sales units2,400 3,500 4,400 The company wants to end each month with ending finished goods inventory equal to 10% of the next month’s sales. Finished goods inventory on December 31 is 240 units. The budgeted production units for February are
Answer:
the budgeted production units for the feb month is 3,590 units
Explanation:
The computation of the budgeted production units for the feb month is given below:
= Feb units + closing units - opening units
= 3,500 units + (4,400 units × 10%) - (3,500 units × 10%)
= 3,500 units + 440 units - 350 units
= 3,590 units
hence, the budgeted production units for the feb month is 3,590 units
The same would be considered
Two hundred paper mills compete in the paper market. The total cost of production (in dollars) for each mill is given by the formula TC = 500Qmill + (Qmill)2 where Qmill indicates the mills annual production in thousands of tons. The marginal cost of production is MC = 500 + 2Qmill. The external cost of a mill’s production (in dollars) is given by the formula EC = 40Qmill + (Qmill)2 and the marginal external cost of production is MEC = 40 + 2Qmill. Finally, annual market demand (in thousands of tons) is given by the formula Qd = 150,000 – 100P where P is the price of paper per ton. Using algebra, find the competitive equilibrium price and quantity, as well as the efficient quantity. Calculate the magnitude of the deadweight loss resulting from the externality. Illustrate your solution with graphs.
Answer: See explanation
Explanation:
The magnitude of the deadweight loss resulting from the externality is shown below:
MC = 500 + 2Q
MEC = 40 + 2Q
Therefore, the Marginal social cost (MSC) will be:
= MC + MEC
= 500 + 2Q + 40 + 2Q
= 540 + 4Q
Since Demand: Q = 150,000 - 100P, we have to get a function for P which will be:
Q = 150,000 - 100P
100P = 150,000 - Q
P = (150,000 - Q)/100
P = 1,500 - 0.01Q
Total revenue, TR = P x Q
= (1,500 - 0.01Q) × Q
= 1500Q - 0.01Q²
Marginal revenue, MR will be:
= dTR / dQ
= 1,500 - 0.02Q
It should be noted that for when there's no externality, Equilibrium, MC must be equal to MR. Therefore,
1,500 - 0.02Q = 500 + 2Q
2Q + 0.02Q = 1500 - 500
2.02Q = 1,000
Q = 1000/2.02
Q = 495
P = 1,500 - (0.01 x 495)
= 1,500 - 4.95
= 1,495.05
When there's externality, Equilibrium will be:
MR = MSC
1,500 - 0.02Q = 540 + 4Q
4.02Q = 960
Q= 960/4.02
Q = 239
Therefore, P = 1,500 - (0.01 x 239)
= 1,500 - 2.39
= 1,497.61
Then, we will calculate the deadweight loss which will be:
= 1/2 x Difference in price x Difference in quantity
= 1/2 x (1,497.61 - 1,495.05) x (495 - 239)
= 1/2 x 2.56 x 256
= 327.68
It is argued that LIFO should not be allowed to compute net income because a. it does not match costs to revenues, especially when there is inflation in the economy. b. it overstates balance sheet inventory. c. it understates cost of goods sold when prices are rising and therefore makes US companies' results look better than foreign companies' results which can only use FIFO. d. it causes profits to be understated when prices are rising and allows a company to dodge taxes.
Answer:
d. it causes profits to be understated when prices are rising and allows a company to dodge taxes.
Explanation:
The LIFO method should not be permitted to determine the net income as in this case the profits would be understated at the time when price is increased due to this it permits the company to dodge taxes as the inventory consumed in the production process also the high inventory value would be involved in the cost of sales that represent the high cost, this result in lower profits and taxes
Hence, the option d is correct
On January 1, 2021, Wetick Optometrists leased diagnostic equipment from Southern Corp., which had purchased the equipment at a cost of $2,251,671. The lease agreement specifies six annual payments of $470,000 beginning January 1, 2021, the beginning of the lease, and at each December 31 thereafter through 2025. The six-year lease term ending December 31, 2026 (a year after the final payment), is equal to the estimated useful life of the equipment. The contract specifies that lease payments for each year will increase on the basis of the increase in the Consumer Price Index for the year just ended. Thus, the first payment will be $470,000, and the second and subsequent payments might be different. The CPI at the beginning of the lease is 120. Southern routinely acquires diagnostic equipment for lease to other firms. The interest rate in these financing arrangements is 10%. (FV of $1, PV of $1, FVA of $1, PVA of $1, FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.) Required: 1. Prepare the appropriate journal entries for Wetick to record the lease at its beginning. 2. Assuming the CPI is 126 at that time, prepare the appropriate journal entries related to the lease for Wetick at December 31, 2021.
Answer:
Equipment 2,251,669.78 DEBIT
Cash 470,000.00 CREDIT
Lease Liability 1,781,669.78 CREDIT
--to record the beginning of the lease--
Lease liability 291,833.02 debit
interest expense 178,166.98 debit
loss on monetary position 23,500 debit
Cash 493,500 credit
Explanation:
We solve for the present value of the six payment of 470,000 to know the lease liability
Present Value of Annuity
[tex]C \times \displaystyle \frac{1-(1+r)^{-time}}{rate} (1+rate)= PV\\[/tex]
C 470,000
time 6
rate 0.1
[tex]470000 \times \displaystyle \frac{1-(1+0.1)^{-6}}{0.1} (1 + 0.10) = PV\\[/tex]
PV $2,251,669.7816
We subtract the first payment of 470,000
Lease liability account: 1,781,669.78
Second payment journal entry:
interest calculations:
1,781,669.78 x 0.1 = 178,166.98
principal payment:
470,000 - 178,166.98 = 291,833.02
inflation' adjustment:
470,000 x 126/120 = 493,500
The difference will be a loss on monetary position by the difference:
493,500 - 470,000 = 23,500
Tandy Company was issued a charter by the state of Indiana on January 15 of this year. The charter authorized the following: Common stock, $7 par value, 119,000 shares authorized Preferred stock, 15 percent, par value $6 per share, 6,000 shares authorized During the year, the following transactions took place in the order presented: a. Sold and issued 21,300 shares of common stock at $12 cash per share. b. Sold and issued 1,900 shares of preferred stock at $16 cash per share. c. At the end of the year, the accounts showed net income of $41,400. No dividends were declared.
Answer:
$327,400
Explanation:
Preparation of the stockholders' equity section of the balance sheet at the end of the year.
TANDY, INCORPORATED Balance Sheet (Partial) At December
TANDY, INCORPORATED
Balance Sheet (Partial)
At December 31, this year
Stockholders' equity:
Contributed capital:
Common stock $149,100
(21,300*$7)
Additional paid-in capital, common stock $106,500
[21,300 x (12-7)]
Common stock - Contributed capital $255,600
($149,100+$106,500)
Preferred stock $11,400
(1,900*$6)
Additional paid-in capital, Preferred stock $19,000
[1,900 x (16-6)]
Preferred stock - Contributed capital $30,400
($11,400+$19,000)
Total Contributed Capital $286,000
($255,600+$30,400)
Retained earnings $41,400
Total Stockholders' equity $327,400
($286,000+$41,400)
Therefore the stockholders' equity section of the balance sheet at the end of the year will be $327,400
What is the first element that should be considered in creating an
advertisement?
Answer:
UNDERSTANDING THE PRODUCT DNA::
the first element is recognise the idea behind the product or service.For example if you are selling "bespoke clothing line" then the idea behind is 'luxury'. therefore, the advertising campaign must revovle around luxury.
Answer:
the message
Explanation:
A local college is deciding whether to conduct a campus beautification initiative that would involve various projects, such as planting trees and remodeling buildings, to make the campus more aesthetically pleasing.
For the students of the college, the visual appearance of the campus is_________and __________ . Thus, the visual appearance would be classified as a public good.
Suppose the college administrators estimate that the beautification initiative will cost $7,200. To decide whether the initiative should be undertaken, administrators conduct a survey of the college's 300 students, asking each of them their willingness to pay for the beautification project. The average willingness to pay, as revealed by the survey, is $18.
Answer:
Non rival and non excludable
Explanation:
if the visual appearance is classified as a public good, then it is non-rival and non excludable.
In economics, a public good is described with these two characteristics. such goods are non rivalrous and also without excludability.
if mr A is using such a good, it does not prevent mr B from using it also. Also Mr A cannot exclude Mr B from using it
the benefit of the beautification initiative = $18*300
= 5400
Tim, a single taxpayer, operates a business as a single-member LLC. In 2020, his LLC reports business income of $382,000 and business deductions of $668,500, resulting in a loss of $286,500. What are the implications of this business loss
Answer: See explanation
Explanation:
First, it should be noted that a threshold limit of $250,000 applies to the question according to IRS since Tim is a single taxpayer.
Therefore, the excess business loss will be:
= $286,500 - $250,000
= $36500
Therefore, Tim can use $250000 out of the loss of $286,500 to offset the non business income. Then, the excess business loss of $36500 will be treated as part of the NOL carryforward for Tim.
Ocean Seafood Company purchases lobsters and processes them into tails and flakes. It sells the lobster tails for $20 per pound and the flakes for $15 per pound. On average, 100 pounds of lobster are processes into 57 pounds of tails and 24 pounds of flakes, with 19 pounds of waste. Assume that the company purchased 3,000 pounds of lobster for $6.00 per pound and processes the lobsters with an additional labor cost of $1,800. No materials or labor costs are assigned to the waste. What is the cost to process tails and flakes and the cost per pound
Answer:
Ocean Seafood Company
The cost to process tails and flakes = $19,800
The cost per pound = $8.15
Explanation:
a) Data and Calculations:
Tails Flakes Waste Total
Sales price per pound $20 $15
Ratio of processing 100 pounds 57 24 19
Purchase of 3,000 pounds 1,710 720 570 2,430
Cost of 3,000 pounds at $6each $12,667 $5,333 0 $18,000
Labor cost 1,267 533 0 1,800
Total cost $13,934 $5,866 0 $19,800
Cost per pound $8.15 $8.15 $8.15
The equation of exchange states
[tex] \texttt{The equation of exchange states}[/tex]
Anatomy of the Exchange Equation There are different variants of the equation (M * V = P * T, M * V = P * Y, M * V = P * Q,to take the simplest), but none of them is substantially different from the original formula of Fisher: [tex]{\boxed{ \boxed{ \bold{M * V = P * T.}}}}[/tex]----------------------------------------------------------------------------------------------
[tex] \bold{BRAINLYMENTALMENTE}[/tex]
Which sentence best explains the mistake Maggie made? Her mortgage payments are high, and some months, she earns barely enough to cover the essentials. Because homeowner's insurance was an added expense, she considered taking her chances and not buying it. However, the bank made it clear that this was not an option... When the agent returned on the line, he sounded like a different person. "Ma'am, I'm sorry, but according to our records, you do not have flood insurance protections in your policy. We do offer flood insurance as an add-on to basic homeowner's, but at additional cost." O She failed to properly assess her risk of storm damage. She did not always make her insurance payments on time. O She refused to share the risk of living in an area known for hurricanes. O She should have worked with a different bank to purchase her home.
Answer:
She failed to properly assess her risk of storm damage.
Explanation: Edge 2021
When a company uses outsourcing to zero in on even better performance of those truly strategy-critical activities where its expertise is most needed, then it may also be able to:________.
a. better police compliance with ethical standards, lower overall operating costs, and create two or more distinctive competencies.
b. devote more resources to its social responsibility strategy, better empower employees, and reduce employee turnover.
c. decrease internal bureaucracies, flatten its organizational structure, and shorten the time it takes to respond to changing market conditions.
d. create a values-based corporate culture that excels in product innovation.
e. reduce the potential for information overload and improve the quality of decision-making in each domain.
Answer:
c. decrease internal bureaucracies, flatten its organizational structure, and shorten the time it takes to respond to changing market conditions.
Explanation:
Outsourcing is the process where a business gives out part of its activities to a third party to handle.
They are no longer directly in control of the activity.
For example recruitmemt, procurement, and sales can be outsourced to third party companies.
In the given scenario. If a company uses outsourcing to zero in on those truly strategy-critical activities where its expertise is most needed, then it will reduce the bureacracy associated with outsourcing.
Employees of the company will have a shorter time to respond to changing market conditions.
Unlike when it is outsourced and one needs to communicate with a third party
Item1 10 points Time Remaining 59 minutes 50 seconds00:59:50 eBookItem 1 Time Remaining 59 minutes 50 seconds00:59:50 Denny Corporation is considering replacing a technologically obsolete machine with a new state-of-the-art numerically controlled machine. The new machine would cost $150,000 and would have a sixteen-year useful life. Unfortunately, the new machine would have no salvage value. The new machine would cost $20,000 per year to operate and maintain, but would save $50,000 per year in labor and other costs. The old machine can be sold now for scrap for $15,000. The simple rate of return on the new machine is closest to (Ignore income taxes.)
Answer:
Denny Corporation
The simple rate of return on the new machine is closest to:
= 13.75%.
Explanation:
a) Data and Calculations:
Cost of new machine = $150,000
Estimated useful life = 16 years
Salvage Value = $0
Annual depreciation expense = $9,375 ($150,000/16)
Operation and maintenance cost per year = $20,000
Savings in labor and other costs per year = $50,000
The net savings in costs per year = $30,000 ($50,000 - $20,000)
Incremental net income = $20,625 ($30,000 - $9,375)
The simple rate of return = Net Savings per year/Cost of new machine * 100
= $20,625/$150,000 * 100
= 13.75%
b) This simple rate of return of 13.75% does not account for inflation or the time value of the investment. So there is no discounting or calculation of the present values of the investment and the incremental net income. Instead, it considers the annual depreciation expense that is attributable to the investment.