help me pleaseeee, ty if you doo:))

Answer:

because the minerals in the rock can't be used until they are separated

Answer:

Ionic bonding is the complete transfer of valence electron(s) between atoms and is a type of chemical bond that generates two oppositely charged ions. By losing those electrons, these metals can achieve noble-gas configuration and satisfy the octet rule. ...

Explanation:

Answer:

Ore

hope this helps

thanks for the points

Answer:

in parallel

Explanation:

All of the home equipment in the residence are linked in parallel.

parallel association

electric appliances are connected in a parallel arrangement in a house circuit because every appliance gets complete voltage as resistance in a parallel association is low.

electric appliances are not linked in series because the cutting-edge can be the same thru all the home equipment connected but voltage increases if extra no. Of appliances are related. If the battery has low voltage than the full voltage it can short circuit.

research greater approximately the parallel.

Learn more about parallel circuit

here:https://brainly.com/query/12069231

#SPF2

on the left side of the arrow

The reactants in the chemical equation located on the left side of the arrow. Option D is correct.

The arrow in the chemical equation represents the direction of the chemical reaction, and it separates the reactants from the products.

A chemical equation is a symbolic representation of a chemical reaction, showing the starting materials (reactants) and the resulting substances (products). The general form of a chemical equation is as follows:

Reactants → Products

Reactants: The reactants are the substances present at the beginning of the chemical reaction. They are the starting materials that undergo a chemical change or reaction to produce new substances. Reactants were written on the left side of the arrow.

Arrow: The arrow in the chemical equation points from the reactants to the products, indicating the direction of the reaction. It symbolizes the transformation of reactants into products during the chemical reaction.

Products: The products are the substances formed as a result of the chemical reaction. They are the new compounds or elements that are produced by rearranging the atoms of the reactants. Products were written on right side of the arrow.

For example, let's consider the combustion of methane (CH₄) in oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O):

CH₄ (methane) + 2 O₂ (oxygen) → CO₂ (carbon dioxide) + 2 H₂O (water)

In this chemical equation, methane (CH₄) and oxygen (O₂) are the reactants, and they are located on the left side of the arrow. The products, carbon dioxide (CO₂), and water (H₂O), are located on the right side of the arrow.

Hence, D. is the correct option.

To know more about reactants here

https://brainly.com/question/14449229

#SPJ2

The heat required : 840 J

Given

mass of water = 20 g

Temperature : 30°C to 40°C

Required

Heat to raise the temperature

Solution

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  (for water= 4.18 J/g° C)

∆T = temperature difference, ° C / K  

The heat :

[tex]\tt Q=20\times 4.2\times (40-30)\\\\Q=\boxed{\bold{840~J}}[/tex]

Answer:

Lemon juice because it has more of a sour taste to it than a watery taste like milk

Explanation:

Answer:

It contain double Bond.

Explanation:

To determine weather the bond is double or triple simply check the electron involved in mutual sharing of an electron if 2 electron takes parts it said to be double or if 3 it said to be triple.

Answer:

Explanation:

A decomposition reaction occurs when one reactant breaks down into two or more products. This can be represented by the general equation: AB → A + B. Examples of decomposition reactions include the breakdown of hydrogen peroxide to water and oxygen, and the breakdown of water to hydrogen and oxygen.

Answer:

Covalent bond

Explanation: Hydrogen and Oxygen are both non-metals, with a low difference in electronegativity. They will share electrons.

Ionic and covalent bonds can occur in substances that have a repeating lattice structure.

Ionic bonds are formed when an atom donates electron (s) to another atom. Covalent bonds, on the other hand, are formed when two atoms share electrons to complete their octet states.

Ionic compounds are formed from a combination of metal and non-metal atoms. They usually have crystalline lattice structures with high melting points.

Covalent compounds are formed between non-metal atoms. They can also have lattice structures but generally have lower melting points because the forces holding the molecules together are weaker.

More on ionic and covalent bonds can be found here: https://brainly.com/question/10777799

#SPJ1

Answer:

Occurs in substances that have a repeating lattice structure

Explanation:

Answer:

the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors.

Explanation:

In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

Answer:

See explanation

Explanation:

The equation of the reaction is;

CH3COOCH3 + H2O -------> CH3COOH + CH3OH

Now recall that the rate of reaction refers to the rate of disappearance of reactants or the rate of appearance of products. We indicate that reactants disappear by a negative sign placed in front of the concentration term of reactants.

Rate = k -d[CH3COOCH3]/dt

Rate = k d[CH3COOH]/dt

Rate = k d[CH3OH]/dt

Note; i did not write the rate in terms of water because it is a solvent that is present in large excess. Its concentration does not change with time.

Answer:

521 nm

Explanation:

From the question given above, the following data were obtained:

Frequency (v) = 5.76×10¹⁴ s¯¹.

Wavelength (λ) =.?

RECALL: velocity (c) of light = 3×10⁸ m/s

Thus, we can obtain the wavelength of the green light by using the following formula:

c = vλ

3×10⁸ = 5.76×10¹⁴ × λ

Divide both side by 5.76×10¹⁴

λ = 3×10⁸ / 5.76×10¹⁴

λ = 5.21×10¯⁷ m

Next, we shall convert 5.21×10¯⁷ m to nanometer (nm). This can be obtained as follow:

1 m = 1×10⁹ nm

Therefore,

5.21×10¯⁷ m = 5.21×10¯⁷ m × 1×10⁹ nm / 1 m

5.21×10¯⁷ m = 521 nm

Thus, 5.21×10¯⁷ m is equivalent to 521 nm

Therefore, the wavelength (λ) of the photon of the green light is 521 nm.

Answer:

the wavelength (λ) of the photon of the green light is 521 nm.

Answer:

A- a rigid solid

Explanation:

The Earths mantle is mainly made up of rock and rocks are rigid and are solid.

Answer:

100

Explanation:

nsvcscjkvschssvds

Answer:

Normality of KOH = 0.1062 N

Note: The given question is not clearly stated. A related question below is answered and explained;

What is the NORMALITY of a solution of KOH if 45.18 mL are required to neutralize 0.3g of pure oxalic acid H2C2O4 . 2H2O?

Explanation:

Equation of the reaction: 2KOH + H₂C₂O₄.2H₂O --> K₂C₂O₄ + 4H₂O

molar mass 0f KOH = 56 g/mol; molar mass of H₂C₂O₄.2H₂O = 126 g/mol

Number of moles of in 0.3 g of H₂C₂O₄.2H₂O = mass/molar mass

number of moles = 0.3 g / 126 g/mol = 0.0024 moles

From the equation of reaction, 2 moles of KOH are required to neutralize 1 mole of H₂C₂O₄.2H₂O

Number of moles of KOH required to neutralize 0.0024 moles of H₂C₂O₄.2H₂O = 2 * 0.0024 = 0.0048 moles

Molar concentration of 45.18 mL solution of KOH containing 0.0048 moles of  KOH = number of moles/volume (L)

molarity of KOH solution = (0.0048/45.18 mL) * (1000 mL/1 L) = 0.1062 mol/L

Normality = n * molarity

where is the number of moles of OH⁻ ions produces from  mole of KOH = 1

Normality of KOH = 1 * 0.1062

Normality of KOH = 0.1062 N

Answer:

is the getting out of a gas in a water solution or it the property of forming bubbles

Explanation:

Reaction of zinc metal in copper sulfate solution.

[tex]\begin{array}{ll}\text { Oxidation : } & \mathrm{Zn}(s) \rightarrow \mathrm{Zn}^{2+}(a q)+2 e^{-}\\\text {Reduction : } & \mathrm{Cu}^{2+}(a q)+2 e^{-} \rightarrow \mathrm{Cu}(s) \\\hline \text { Full Reaction : } & \mathrm{Zn}(s)+\mathrm{Cu}^{2+}(a q) \rightarrow \mathrm{Zn}^{2+}(a q)+\mathrm{Cu}(s)\end{array}[/tex]

Zinc is listed above copper on the activity series, this means that zinc is more easily oxidized than copper. That is why copper(II) ions can act as an oxidizing agent when put into contact with zinc metal. Ions of any metal that is below zinc, such as lead or silver, would oxidize the zinc in a similar reaction.

Answer:

6.3 moles of water = 6.3*18=113.4 grams per mole

Explanation:

Explanation:

Percentage composition of oxygen = (80/134) * 100% = 59.7%.

Answer:

Weather is the condition of Earth’s atmosphere at a particular time and place, whereas climate is the characteristic weather in an area over a long period of time.

Explanation:

Weather and climate are two very important conditions that describes the atmospheric overview of a place.

Weather is reported over a short period of time, it is the condition of the atmosphere at a particular time and place.

Climate is reported over a long period of term. The average weather condition of a place over a long period of time is the climate.

Answer/Explanation:

#1 - A pure substance is either an element or a compound, making it different from a mixture. A sample of matter that has specific chemical and physical properties is the only one that fits here.

#2 - A pure substance is either an element or a compound, making it different from a mixture. Water is a compound, and thus this would be true.

#3 - An atom is the smallest unit of an element that keeps the properties of that element. Just refer to its definition.

#4 - A molecule is two or more atoms held together by chemical bonds . Again, just refer to its definition.

#5 - A chemical bond is the attractive force that holds atoms together . Jus refer to its definition.

#6 - Molecules are most definitely not all the same size, especially given the huge number of them. This would be false.

#7 - A compound is a pure substance made up of two or more different types of atoms joined by chemical bonds . Just refer to its definition.

#8 - Compounds always form in a fixed ratio, so this would be false.

#9 - If by directly, the problem means with the naked eye, this would be true.

#10 - False. It's reversed.

#11 - A crystal is a substance in which the particles are arranged in an orderly, geometric, and repeating pattern . Just refer to its definition.

#12 -True; to be more specific, they are covalent network solids.

Answer:

Light

Explanation:

Light is a good example of invisible particles. We cannot see light particles aka photon. We only know the light is present by the objects we see. Because we can only see objects when light reflects from them on our eyes.

[I could only think of one example if I can remember one more I'll edit it down]

Answer:

D

Commutator is the answer

Explanation:

The commutator systematically converts the current direction between the rotor and the outer circuit. As the shaft revolves, the commutator converts the course of current in a winding. For a separate armature winding, when a cylinder has reached one-half perfect turn, the winding is now attached so that current passes through it in the reverse of the original direction.

Answer:

D. Commutator

Explanation:

I just took the quiz. credit to the person above me.

answer is attached in the image below

Answer:

Hydrochloric Acid

Explanation:

Answer:

F

Explanation:

Explanation:An ionic bond essentially donates an electron to the other atom participating in the bond, while electrons in a covalent bond are shared equally between the atoms. The only pure covalent bonds occur between identical atoms. ... Ionic bonds form between a metal and a nonmetal. Covalent bonds form between two nonmetals.      

Answer:

C) number of occupied energy shells

Explanation:

Atomic numbers of different elements must differ, as well as atomic masses. The number of oxidation states differs per atom as well.

Answer:

87.58 L of C₂H₂

Explanation:

We'll begin by calculating the number of mole in 250 g of CaC₂.

This can be obtained as follow:

Mass of CaC₂ = 250 g

Molar mass of CaC₂ = 40 + (12×2)

= 40 + 24

= 64 g/mol

Mole of CaC₂ =?

Mole = mass /Molar mass

Mole of CaC₂ = 250 / 64

Mole of CaC₂ = 3.91 moles

Next, the balanced equation for the reaction. This is given below:

CaC₂ + 2H₂O —> C₂H₂ + Ca(OH)₂

From the balanced equation above,

1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.

Next, we shall determine the number of mole of C₂H₂ produced by the reaction of 250 g (i.e 3.91 moles) of CaC₂. This can be obtained as follow:

From the balanced equation above,

1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.

Therefore, 3.91 moles of CaC₂ will also react to produce 3.91 moles of C₂H₂.

Finally, we shall determine the volume of C₂H₂ produced from the reaction. This can be obtained as follow:

Recall:

1 mole of any gas occupy 22.4 L at STP.

1 mole of C₂H₂ occupied 22.4 L at STP.

Therefore, 3.91 moles of C₂H₂ will occupy = 3.91 × 22.4 = 87.58 L

Thus, 87.58 L of C₂H₂ is produced from the reaction.