Answer:h I think
Explanation:
The Circulatory System is made up of ?
A Blood and Lungs
B Heart and Blood Veins
C arteries, veins, and heart
A student analyzes the data and concludes that one bird flies at a speed of 20 meters per second during a portion of its migration. Select the two types of data that the student needed to form this conclusion
Answer:
The answer is "The location of the bird and time interval between pieces of information".
Explanation:
Please find the complete question in the attached file.
The Radar is the instrument used to gather data from birds by researchers. This would be the primary tool to study the flight behavior of migrating birds with the impact of environmental influences including the ecology of migratory movements, from the broad population group for both the distribution of land areas and geomorphology as well as meteorological systems to the shift in the behavior of airlines of particular birds, especially when responding to lead routes.
How much heat does it take to raise 0.0438 kg of aluminum from room temperature (20.0°C) to its melting point (660°C)?
HELP
Answer:
2.5x10^4 J (scientific notation)
25,000 (Acellus)
Equation:
Q=mcΔT
where:
Q=heat
m = mass
c = specific heat
ΔT=change in temperature
Any rearranging?
Let's see.
No, we need heat.
So no rearranging.
Plug in the numbers and solve
It takes approximately 28,224 joules of heat to raise 0.0438 kg of aluminum from room temperature to its melting point.
To calculate the heat required to raise the temperature of aluminum from room temperature to its melting point, we need to use the specific heat capacity formula: Q = m × c × ΔT
where:
Q = heat (in joules)
m = mass of aluminum (in kilograms)
c = specific heat capacity of aluminum (in joules per kilogram per degree Celsius)
ΔT = change in temperature (in degrees Celsius)
Given:
Mass of aluminum (m) = 0.0438 kg
Specific heat capacity of aluminum (c) = 900 J/kg°C (approximate value for aluminum)
Change in temperature (ΔT) = melting point (660°C) - room temperature (20°C) = 640°C
Now, let's calculate the heat (Q):
Q = 0.0438 kg × 900 J/kg°C × 640°C
Q = 28,224 J (joules)
So, it takes approximately 28,224 joules of heat to raise 0.0438 kg of aluminum from room temperature to its melting point.
To know more about temperature
https://brainly.com/question/27944554
#SPJ2
4
Students are using an air rocket to investigate the relationship
between force and an object's motion.
Students pump air into the rocket, then release the rocket, and the
compressed air pushes the rocket upward.
A. The length of the hose attached to the pump
B. The distance traveled by the rocket
C. The amount of air pumped into the rocket
D. The height of the rocket from fins to cone
michael's house is 5.0 km away from his school. How long would it take him to go ti school, riding a bus, if its velocity is 25 km/h?
Pleaseee answer correctly
I mark brainliest who answer this
Answer:
12 mins
Explanation:
The distance covered is 5 km, divide this by 25 to get the fraction of an hour it takes. Doing this you get .2, times this by 60 min (1 hour) to get how many mins it takes
Find the electric field a distance z above the midpoint between equal and opposite charges,a distance d apart
Answer:
Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex] , E_z =0
Explanation:
To find the electric field of each charge, let's use
E = k q / r²
where the field for a positive charge is outgoing and for a negative charge it is incoming.
Since the electric field is a vector magnitude, let's add its components at the point z
X axis
Eₓ = E₁ₓ + E₂ₓ
Eₓ = 2 E₁ₓ
Z axis
E_z = E_{1z} -E_{2z}
E_z= 0
Let's find the expression for the electric field
the distance from the charge to the test point, using the Pythagorean theorem is
r² = (x-0) ² + (0-z) ²
E = [tex]k \frac{q}{x^2 + z^2}[/tex]
with trigonometry we can find its components
cos θ = E₁ₓ / E
E₁ₓ = E cos θ
we substitute
Eₓ = 2 E cos θ
where the cosine
cos θ = x / r
Ex = [tex]2 k \frac{q}{x^2 + z^2} \ \frac{x}{\sqrt{x^2 + z^2} }[/tex]
Ex = [tex]2 k q \frac{x}{(x^2 + z^2) ^{3/2}}[/tex]
E_z = 0
PLZZZZ HELPPPPPP MEEEEEE!!!!!! ASAP!!! ILL GIVE 20 POINTS AND BRAINLIEST!!!
:'(
I am soooooooooooo desperate.
Answer:
the answers the correct one is C
Explanation:
In radioactive decay processes, a very important concept is the half-life time, which is the time it takes for the parent nuclei to decompose into child nuclei.
expressed this mathematically is
N = N₀ [tex]e^{- \lambda t}[/tex]
for the average life time
N₀ / 2 = N₀ [tex]e^{- \lambda T_{1/2}[/tex]
T =[tex]\frac{ln 2x}{ \lambda}[/tex]
Analyzing this expression, the nuclei that decay are the so-called parents and the new nuclei called children appear.
when checking the answers the correct one is C
2. A hanging wind-chime on a calm day would have kinetic or potential energy?
kinetic
potential
Answer:
it would have potential energy
If you go twice as fast, your kinetic energy becomes.
A.2 times smaller
B.4 times smaller
C.2 times bigger
D.4 times bigger
A toy train moves round a circular track of radius 0.50 m.
How many radians has the trained turned through in moving 1.4 m along a track?
Answer:
2.8 radians
Explanation:
[tex]s = r \beta \\ 1.4 = 0.50 \beta \\ \beta = 2.8 \: rad[/tex]
Light waves travel at 3 × 10 8 m/s. If the light wave has a particular wavelength of 400 nm (400 × 10 –9 m), calculate its frequency.
Answer:
[tex]f=7.5\times 10^{14}\ Hz[/tex]
Explanation:
Given that,
The wavelength of light, [tex]\lambda=400\ nm=400\times 10^{-9}\ m[/tex]
The speed of light, [tex]c=3\times 10^8\ m/s[/tex]
We need to find the frequency of light. We know that,
[tex]c=f\lambda[/tex]
Where
f is the frequency
So,
[tex]f=\dfrac{c}{\lambda}\\\\f=\dfrac{3\times 10^8}{400\times 10^{-9}}\\\\f=7.5\times 10^{14}\ Hz[/tex]
So, the frequency of light is [tex]7.5\times 10^{14}\ Hz[/tex].
An eighth-grade class is studying the motion of objects. They have learned the following concepts about motion.
Motion occurs when there is a change in the position of an object with respect to a reference point.
While the speed of the object may change at various times during a trip the average speed for the trip is found by dividing the total distance by the total time.
The motion of the object can be changed by varying the amount of net force acting on the object or by varying the mass of the object.
The teacher asked students to design investigations to determine how changing the forces acting on an object or the mass of the object would change its motion.
The materials for the investigation included:
1 - toy cart
3 - 10N weights
1 - pulley
2 - meters of string
One group of students decided to design an investigation to determine how different amounts of mass on the toy cart would affect the speed of the toy cart. They set up their investigation as shown below:
The students performed several trials using different masses in the toy cart (M1). They hung a mass shown as (M2) to pull the toy cart as it dropped.
Below is a table they made to record their results.
Which of the following would be a way to test the effect changing the amount of force acting on the object has on the average speed of the object?
Move the cart at various speeds and determine the force at M1
Add varying numbers of weights to M1 and measure the speed of the car.
Add varying numbers of weights to M2 and measure the speed of the cart.
Move the cart at various speeds and determine the force exerted by M2
Add varying numbers of weights to M1 and measure the speed of the car.
Add varying numbers of weights to M2 and measure the speed of the cart.
How to test the effect of weight on the speed of object?In order to test the changing amount of force that is acting on the object has effect on the average speed of the object we have to change the amount of weight on the object and allows it to move to a certain point in this way we can check the effect of changing amount of weight on the speed of the object.
Learn more about weight here: https://brainly.com/question/2337612
Determine both the mass and the charge of a block of material consisting of 3 x 10^27 protons, 3 x 10^37 neutrons, and 3.1 x 10^27 electrons.
Answer:
The mass of the block of material is 3 x 10³⁷ g/mol
The charge of the material is 4.8 x 10⁸ C
Explanation:
Given;
number of protons of the material, P = 3 x 10²⁷
number of neutrons in the material, N = 3 x 10³⁷
number of electrons in the material, E = 3 x 10²⁷
The mass of the block of material is calculated as follows;
M = P + N
M = 3 x 10²⁷ + 3 x 10³⁷
M = 3 x 10³⁷ g/mol
The charge of the material is calculated as follows;
charge of 1 electron = 1.6 x 10⁻¹⁹ C
charge of 3 x 10²⁷ electrons = 3 x 10²⁷ electrons x 1.6 x 10⁻¹⁹ C
= 4.8 x 10⁸ C
Please help!!!
The Ice cube melting on the conducting plate
What is the main type of thermal energy...
. Conduction
.Convection
. Radiation
Answer:
conduction, convection, and radiation
Explanation:
when you hold an ice cube, heat is transferred from your warm hand to the cold ice and melts it. Your hand feels cold because it is losing heat energy. There are three ways that heat can be transferred: by conduction, convection, and radiation. heat through solids.
Calculator
What is the value of x?
Enter your answer in the box.
Х
24
x =
7
2
3
4 5 6 7 8
9
Answer:
25
Explanation:
By Using Pythagoras Theorem,
h^2=p^2+b^2
or, x^2=(24)^2+7^2
or, x^2=576+49
or, x^2=625
or, x=√625
•°• x=25
The value of x in this figure is 25.
What is Pythagorean theorem ?
Pythagorean theorem is applicable to only right angle tringle. it is defined as square of the hypotonias is equal to the square of sum of base and height.
i.e. hypotonias² = base² + height².
In this figure given values are,
Base = 7
Height = 24
hypotonias x = ?
according to Pythagorean theorem,
hypotonias² = base² + height²
hypotonias² = 7² + 24²
hypotonias² = 625
hypotonias = 25
Hence the value of x is 25.
To know more about Pythagorean theorem click :
https://brainly.com/question/14930619
#SPJ7.
HELP ASAP Which statement describes the water particles when condensation takes place?
A. The particles gain heat energy and move closer to each other
B. The particles lose heat energy and move closer to each other
C. The particles gain heat energy and move away from each other
D. The particles lose heat energy and move away from each other
A wave carries _____ from one place to another
Mechanical waves carry energy through ______
Answer:
Energy
Matter
Explanation:
Bcuz I just did it on the warm up for edge
Answer:
the answer is energy and matter trust me
Explanation:
Tarzan, whose mass is 100 kg, is hanging at rest from a tree limb. Then he lets go and falls to the ground. Just before he lets go, his center of mass is at a height 2.9 m above the ground and the bottom of his dangling feet are at a height 2.1 above the ground. When he first hits the ground he has dropped a distance 2.1, so his center of mass is (2.9-2.1) above the ground. Then his knees bend and he ends up at rest in a crouched position with his center of mass a height 0.5 above the ground. Consider the point particle system. What is the speed v at the instant just before Tarzan's feet touch the ground?
Answer:
[tex]6.42\ \text{m/s}[/tex]
Explanation:
v = Final velocity
u = Initial velocity = 0
s = Displacement of Tarzan's feet = 2.1 m
a = g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
From the kinematic equations we get
[tex]v^2-u^2=2as\\\Rightarrow v=\sqrt{2as+u^2}\\\Rightarrow v=\sqrt{2\times 9.81\times 2.1+0}\\\Rightarrow v=6.42\ \text{m/s}[/tex]
At the instant just before Tarzan's feet touch the ground the velocity of his feet are [tex]6.42\ \text{m/s}[/tex].
The speed at an instant just before Tarzen's feet touch the ground will be
[tex]V=6.42\ \dfrac{m}{s}[/tex]
What is speed?The speed of any body is defined as the movement of the body with respect to the time.
It is given in the question that
Mass of the Tarzen m=100 kg
The distance of the Tarzen's feet from the ground s=2.1 m
The acceleration due to gravity [tex]a=9.81\ \frac{m}{s^2}[/tex]
The speed of the Tarzen will be calculated by applying the equation of motion.
[tex]v^2=u^2+2as[/tex]
Since initial velocity is zero u=0
[tex]v^2=2as[/tex]
[tex]v=\sqrt{2as}[/tex]
[tex]v=\sqrt{2\times 9.81\times 2.1} =6.42 \ \frac{m}{s}[/tex]
Thus the speed at an instant just before Tarzen's feet touch the ground will be
[tex]V=6.42\ \dfrac{m}{s}[/tex]
To know more about speed follow
https://brainly.com/question/4931057
If the car goes exits a freeway and goes from 65
mph to 35 mph is it accelerating?
Answer:
No, the car is decelerating
Explanation:
No the car is decelerating if it exits a freeway and goes from 65
mph to 35 mph since the change in velocity is negative.
change in velocity = final - initial
change in velocity = 35 - 65
change in velocity = -30mph
Since the change in velocity is negative, hence the car is decelerating. Deceleration is a negative acceleration
Can someone please explain this to me?
Answer:
the anser should be d
Explanation:
35) Kinetic energy in flowing water drives
A watermill. B. windmill
to generate electricity.
C. turbines. D. generator
Answer:
C) Turbines
Explanation:
C. because as the water flows, its kinetic energy is used to turn a turbine.
work done in taking charge from one point of a conductor to is another point is called
Answer:
⁸
Explanation:
electric potential
I think so
A spring has an unstretched length of
12.0 cm. Its stiffness k is 8 N/cm. What load is
needed to stretch the spring to a length of 15.0 cm?
Answer:
24 N
Explanation:
Given,
Unstretched length or original length , x1 = 12cm
Stiffness constant, k = 8 N/cm
Load required to take spring to a length , x2 of 15cm
Recall the relation :
F = Ke
Where, e = extension
e = x2 - x1
e = (15 - 12) = 3
F = ke
F = 8 N/cm * 3cm
F = 24 N/cm*cm
F = 24 N
Hence, required load = 24 N
Think Critically Suppose your teacher gave you a slide of an unknown cell. How would you tell whether the cell was from an animal or from a plant?
Answer:
You will be able to tell whether the unknown cell is from an animal or from a plant through the knowledge of difference between plants and animal cells.
Explanation:
A cell can be defined as the simplest bit of living matter which exhibits a variety of shapes and sizes and that can exist independently.
When a slide of an unknown cell is studied under a microscope, different cell structures would be observed which would be used to conclude if the cell on the slide is a plant or animal cell.
The following features are observed in a plant cell:
--> cellulose cell wall is present
--> Chloroplast is present
--> A large central vacuole is present
--> Centriole is absent
The following features are observed in animal cell:
--> Cellulose cell wall is absent
--> Chloroplast is absent
--> Small vacuoles is present
--> Centriole is present
The difference between a plant and an animal cell can be seen from the features above and a clear knowledge of this will help the student tell whether the unknown cell is from an animal or from a plant.
Define centre of mass.
Answer:
The center of mass is a position defined relative to an object or system of object
PLA help if you understand
Answer:
b - it is not based on experimental data collected by scientists
A spherical conducting shell has charge -5 C. A particle with charge -8 C is placed at the center of the cavity. The charges (in C) on the inner surface and on the outer surface of the shell, respectively, are:
Answer:
Explanation:
The charge of - 5C will be spread on the outer surface of the shell . The presence of - 8C charge at the Centre will create + 8C charge on the inner surface and - 8C charge on the outer surface . The result is that the total charge on the outer surface of the shell will be - 5C + - 8C = - 13C and the inner surface will have charge of + 8C . + 8C charge will be locked to centrally situated - 8C charge and will not be neutralized by negative charge of outer surface .
If the radius increased between the two objects what would happen to gravitational force between them?
Answer:
The Gravitational Force would decrease
Explanation:
The equation Gm1m2/r^2 is the equation for gravitational force. If you look, as we increase the radius, the overall value will decrease as we move further apart.
what made the dinosaurs instinct
Answer:
Eruptions/Volcano
Explanation:
poop fell from the sky
Which of the following organs are found in the
lower gastrointestinal tract? Check all that apply.
answers are above
Answer:
small intestine, tongue and large intestine
Explanation:
The GI tract is a series of hollow organs joined in a long, twisting tube from the mouth to the anus. The hollow organs that make up the GI tract are the mouth, esophagus, stomach, small intestine, large intestine, and anus. The liver, pancreas, and gallbladder are the solid organs of the digestive system.