A woman weighing 600 N is leaning on the ground with shoe soles with a total area of 0.04 m2. Calculate the pressure of the motors
Answer:
1.5×10^4
Explanation:
Pressure= force/area
P= 600/0.04
P= 15000
P= 1.5×10^4
a force is 24N is exerted on 2 carts. Cart A has a mass of 45kg and cart B has a mass of 25kg. Which cart will have the greater acceleration?
can someone at least help with one of these i will give brainliest
Answer:
1375 J/kg.°C
Explanation:
From the question First question,
Q = cm(Δt)................... Equation 1
Where Q = Heat released, c = specific heat capacity of the unknown metal, m = mass of the unknown metal, Δt = Change in temperature.
make c the subject of the equation
c = Q/mΔt.................. Equation 2
Given: Q = -5500 J (Since heat is released, Q is negative), m = 200 g = 0.2 kg, Δt = 10-30 = -20°C
Substitite these values into equation 2
c = -5500/[0.2×(-20)]
c = -5500/-4
c = 1375 J/kg.°C
Add distilled water to the beaker until the volume
totals 15 mL.
Record the amount of cornstarch that dissolved.
all
about half
none
20
25 ml
15
10
5
Intro
Answer:
The correct answer on edge for 2021 is C. None.
Explanation:
We know this is correct because the solution is heterogenous after it has been stirred: the substance is not soluble in water.
The solution is heterogeneous after it has been stirred. The cornstarch is not soluble in water. Therefore, option C is correct.
What is the solution?Any mixture of one or more solutes that have been dissolved in a solvent is referred to as a solution. To create a homogenous mixture, a solute must dissolve in a solvent. To create a homogenous mixture, a solute must dissolve in a solvent.
Whereas homogenous mixtures seem consistent throughout, heterogeneous mixtures have clearly discernible components. A solution, which can be a solid, liquid, or gas, is the most typical kind of homogenous mixture.
No matter how you sample a homogenous solution, it often has the same characteristics. Sources of water, saline solution, certain metals, and bitumen are homogenous mixes. Examples of heterogeneous combinations are chicken noodle soup, sand, and oil, and water.
Thus, option C is correct.
To learn more about the solution, follow the link:
https://brainly.com/question/30665317
#SPJ7
a repelling force occurs between two charged objects when the charges are
Answer:
Like signs.
Explanation:
When two charges are like signs, a repelling force will occur.
If it takes 25 mL of 0.05 M HCl to neutralize 345 mL of NaOH solution, what is the concentration, M, of the NaOH solution?
Answer:
400ml
Explanation:
Can someone help me with this. Thank you
Answer:
Location x is experiencing daytime because it is facing directly to the sun.
Explanation:
From a background understanding of the solar system, the side of the planet facing the sun will be experiencing daytime while the other side of the planet will be experiencing either partial or total darkness depending on the location.
From the diagram given above, we can see clearly that location x is facing the sun and as such, light rays from the sun lightens the location. When this happens, location x will be experiencing daytime.
In conclusion, location x is experiencing daytime because it is facing directly to the sun.
Consider the titration of 82.0 mL of 0.140 M Ba(OH)2 by 0.560 M HCl. Calculate the pH of the resulting solution after the following volumes of HCl have been added. (a) 0.0 mL WebAssign will check your answer for the correct number of significant figures. 13.447 Correct: Your answer is correct. (b) 15.0 mL WebAssign will check your answer for the correct number of significant figures. 12.25 Incorrect: Your answer is incorrect.
Answer:
a) pH = 13.447
b) pH = 13.176
Explanation:
Ba (OH)₂ is a strong base and ionizes completely in solution to give barium amend hydroxide ions.
The equation of the dissociation of Ba(OH)₂ is given below:
Ba(OH)₂ ----> Ba2+ + 2OH-
1 mole of Ba(OH)₂ produces 2 Moles of OH- ions
a) Before the addition of HCl, i.e.,when 0.00 mL of HCl has been added;
Concentration of hydroxide ions, [OH-] = 0.140 x 2 = 0.a) [OH-] = 0.100 x 2 = 0.280
pOH = -log [OH-]
pOH = -log (0.280)
pOH = 0.553
pH = 14 - 0.553= 13.447
b) pH when 15.0 mL HCl has been added
Moles Ba(OH)₂ = concentration × volume
Volume of Ba(OH)₂ = 82.0 mL = 0.082 L, concentration = 0.140 M
moles of Ba(OH)₂ = 0.082 x 0.140 = 0.01148 moles
moles OH- produced by 0.01148 moles of Ba(OH)₂ = 2 x 0.01148= 0.02296
moles HCl = 0.0150 L x 0.560 = 0.0084
moles of H+ produced by 0.0084 HCl = 0.0084
0.0084 H+ willnreact with 0.0084 moles of OH-
moles OH- left after the reaction = 0.02296 - 0.0084 = 0.01456 moles
total volume of new solution = (82 +15) mL = 97 mL => 0.097 L
Concentration of OH- ions = moles / volume
[OH-] = 0.01456 / 0.097 = 0.1501
pOH = -log [OH-]
pOH = -log (0.150)
pOH = 0.824
pH = 14 - 0.824
pH = 13.176
how can a match light without a spark
Answer:
Use friction
Explanation:
Friction is the force that stops something in motion. It also heats up something, creating a gravitational heat! A match striked against the lighter will create a flame, because of friction :)
litmus is made from plant pigment.
it is red when placed in an acidic solution.
it is blue when placed in an alkaline solution.
it is purple when neutral.
a) what do we call substance that change colour like this?
b) what colour would litmus be in a solution of pH 10?
c) what colour would you expect litmus to be in pure water?
Answer:
For (a): The substances are known as acids and bases.
For (b): The color of the litmus for pH = 10 will be blue.
For (c): The color of the litmus for pure water will be purple.
Explanation:
pH determines the acidity or basicity of a solution. There are three types of solution classified based on the pH:
If pH<7 then the solution is acidic in nature If pH>7 then the solution is basic/alkaline in nature If pH=7 then the solution is neutral in natureLitmus paper is used as an indicator to know the type of solution. There are 2 types of litmus paper:
Red litmus paper: It turns blue when placed in a basic/alkaline solution.Blue litmus paper: It turns red when placed in an acidic solution.(a):
An acid is defined as the chemical species that produces hydrogen ions in the solution while a base is defined as the chemical species that produces hydroxide ions in the solution.
(b):
Given pH value = 10
The solution is basic in nature, thus the color of litmus will be blue.
(c):
Pure water is neutral in nature and has a pH of 7.
Thus, the solution of litmus would be purple.
Evaluate three communication skills that can assist you in sustaining positive relationships
1. Accept and celebrate differences. One of the biggest challenges we experience in relationships is that we are all different. We can perceive the world in many ways. Certainly astumbling block that we come across when we try to build relationships is a desire or an expectation that people will think like we do and, in this way, it is so much easier to create a rapport. We feel more comfortable when we feel that people “get” us and can see our point of view. Life, however, would be very dull if we were all the same and, while we may find it initially easier, the novelty of sameness soon would wear off. So accepting and celebrating that we are all different is a great starting point.
2. Listen effectively. Listening is a crucial skill in boosting another person’s self-esteem, the silent form of flattery that makes people feel supported and valued. Listening and understanding what others communicate to us is the most important part of successful interaction and vice versa.
Active or reflective listening is the single most useful and important listening skill. In active listening, we also are genuinely interested in understanding what the other person is thinking, feeling, wanting, or what the message means, and we are active in checking out our understanding before we respond with our own new message. We restate or paraphrase our understanding of their message and reflect it back to the sender for verification. This verification or feedback process is what distinguishes active listening and makes it effective.
3. Give people your time. Giving time to people is also a huge gift. In a world where time is of the essence and we are trying to fit in more than one lifetime, we don’t always have the time to give to our loved ones, friends, and work colleagues. Technology has somewhat eroded our ability to build real rapport and we attempt to multi-task by texting and talking at the same time.
Being present in the time you give to people is also important, so that, when you are with someone, you are truly with someone and not dwelling in the past or worrying about the future. The connection we make with other people is the verytouchstone of our existence, and devoting time, energy, and effort to developing and building relationships is one of the most valuable life skills.
A family is driving to a nearby city. If they traveled 224.4 miles for 3.3 hours how fast were they traveling?
4. What was the original volume of a gas that expanded to 25
temperature change from 1 to 10 degrees Celsius?
Please help. Which of these are chemical or physical change?
Answer:
Explanation:
a is a physical change you could put the peices back together
b is a chemical change because you cant unburn wood
c is a chemical change because you cant unbake it
d is a physicl change you could te your time and unmix it
Which of the following statements best defines the theoretical yield of a reaction?
a) The ratio of measured yield over actual yield
b) The amount of product measured after a reaction
c) The ratio of measured yield over stoichiometric yield
d)The maximum amount of product that can be obtained
The statement which best defines the theoretical yield of a reaction is the maximum amount of product that can be obtained.
What is yield of any reaction?Yield of any chemical reaction gives idea about the amount of product that will be produced by the chemical reaction between reactants.
Theoretical yield gives idea about the how much maximum yield of any product will be produced in the given chemical reaction by using the stoichiometry of the reaction.
Hence theoretical yield is the maximum amount of product that can be obtained.
To know more about theoretical yield, visit the below link:
https://brainly.com/question/25996347
#SPJ2
As you move from left to right within a period (row), what is the pattern?
Explain why only one type of seismic wave was recorded at location B. (1 sentence only!)
Answer:
p wave
Explanation:
The P wave is designated the primary preliminary wave because it is the first to arrive at a seismic station after an earthquake. It travels at a speed usually less than 6 kilometers per second in the Earth's crust and jumps to 13 kilometers per second through the core.
Litmus turns
in acidic solutions.
green
yellow
blue
red
Answer:
red
Explanation:
red shows if solution is acidic
_______ in saliva start the chemical digestion process
Answer:
amylase
Explanation:
Select the correct answer. Which of the below is an example of mimicry that enables prey species avoid predation
What are the answers? I assume you meant to attach a photo.
Answer:
Thus, the one that is an example of mimicry that enables prey species to avoid predation is a harmless organism imitating the look of a harmful one (option B).
Explanation:
What is a flame test?
A. A method for determining the products of combustion
B. A method of obtaining an emission spectrum from a sample
C. A method for testing the flammability of a sample
D. A method for determining the temperature of combustion
SUBMIT
Answer:
B. A method of obtaining an emission spectrum from a sample
Explanation:
Flame test is a method of obtaining an emission spectrum from a sample.
Emission spectrum is defined as a spectrum of a chemical compound or substance composed of frequencies of electromagnetic radiation. Radiations which are emitted while electron make transition from higher to lower energy level.
Energy of photon is equal to the difference between the two energy states . There are many possible electronic transitions in an atom and every transition has a specific wavelength.Flame test is characteristic for each element as that of an emission spectrum.
Learn more about emission spectrum,here:
https://brainly.com/question/27268130
#SPJ7
How many milliliters of 3.0 M H2SO4 are needed to make 450 mL of 0.10 M H2SO4?
The H-R diagram is useful in
studying all of these about a star
A.except for its brightness b.location in the sky c.temperature
D.magnitude
Answer:
b.location in the sky (If the question is saying:The H-R diagram is useful in
studying all of these about a star except for)
Explanation:
The theoretical HR diagram plots the temperature of the star vs their luminosity (brightness) and the observational HR diagram plots color of the stars vs the absolute magnitude. Depending on mass, stars will also go through specific evolutionary stages that can be seen through the location of the star on the HR diagram. However, the HR diagram will not have data on the location of the star in the sky.
why are some metals such as copper and aluminium not magnetic
Answer:i dont know
Explanation:
I D
K
If a compound contains a poly atomic ion then what type of compound is it A. Convalent Compound B. Ionic Compound
Answer:
B. Ionic Compound
Explanation:
An ionic compound is that compound which contains a positively charged ion called CATION and a negatively charged ion called ANION. The cation loses or transfers electrons to the anion, hence, making the former (cation) positive and the latter (anion) negative.
A polyatomic ion is an ion that contains more than one type of atom e.g OH-, NO3²-, CO3²- etc. A polyatomic ion usually has an overall charge formed from the charges of the individual atoms that makes it up. For example, in OH-, the overall charge is -1.
Since a polyatomic ion can have an overall positive or negative charge, it must enter a reaction with another ion that complements it i.e. a negative polyatomic ion will react with a positive ion to neutralize its charge. Hence, this forms an IONIC COMPOUND. This is why most compounds with polyatomic ions are IONIC COMPOUNDS.
For example, CaCO3 is an ionic compound formed when Ca²+ (cation) reacts with the polyatomic anion: CO3²-
Which statement describes particles of an ideal gas, based on the kinetic molecular theory?
Answer:
There are 5 steps/rules of the ideal gases based on kinetic theory.
Explanation:
1. Particles in a gas are constant moving in random motion.
2. combined volume of the particles is negligible.
3. particles exert no forces on one another
4. any collisions between the particles are completely elastic
5. the average kinetic energy of particles is proportional to temperature in kelvins.
(I had help explaining steps from Sal Khan. I hope this helps! Have a great day!)
what is the relationship between heat and temperature?
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: according to ck12.org "Heat is the sum of all the kinetic energies of all the molecules of an object, while temperature is the average kinetic energy of the molecules of an object."
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Determine the mass of ammonium chloride, NH4CI, required to prepare 0.250 L of a 0.35 M solution of ammonium chloride.
Consider the reaction.
HCl(aq) + KOH(aq) ⟶ KCl(aq) + H2O(l)
In the reaction shown, HCl is
Answer:
the acid used to neutralize the base in oder to form a salt and water
A sealed balloon occupies a volume of 250 mL at an unknown temperature. When the temperature is altered to 30 C, the balloon's volume becomes 0.5 L. Calculate the initial temperature of the air in the balloon.
Answer:
Initial temperature, T1 = 15°C
Explanation:
Given the following data;
Initial volume, V1 = 250 mL to Liters = 250/1000 = 0.25 L
Final temperature, T2 = 30°C
Final volume, V2 = 0.5 L
To find the initial temperature T1, we would use Charles' law.
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
[tex] \frac {V}{T} = K[/tex]
[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making T1 the subject of formula, we have;
[tex] T_{1}= \frac{V_{1}}{V_{2}} * T_{2}[/tex]
Substituting into the formula, we have;
[tex] T_{1}= \frac{0.25}{0.5} * 30[/tex]
[tex] T_{1}= 0.5 * 30 [/tex]
Initial temperature, T1 = 15°C