Answer:
It tastes like an orange, I don't think that you can replicate taste as much as looks, I could be wrong though. But yes it is confusing.
Explanation:
Can I have brainliest? It would help me out, if not thanks anyways! Please tell me if you need me to elaborate more or show work!! I hope this helped and have a nice day!
9. How is spring potential energy determined from a force versus position graph?
Answer: The potential energy associated with a mass attached to a spring depends on how much the spring is stretched or compressed. ... The gravitational force on the mass is −mg (“−” because the force points down). The force is the negative of the slope on the potential energy versus position graph.
Explanation:
:)
By getting the data from the graph of force versus displacement we can calculate the Potential energy of the spring.
What will be the potential energy?As we know that potential energy is defined as the energy possessed by the body due to its position with respect to other positions.
For an example the potential energy of an object if it is placed at height h will be due to the gravitational acceleration of the earth and is given by [tex]PE=mgh[/tex]
Similarly, for a spring-mass system, the potential energy will be due to the weight of the mass that will be the force exerted by the mass on the spring so there will be an extension in the spring.
So this extension will be found out by the force and displacement graph as the position of the mass attached to the spring goes down so the potential energy can be calculated as the
[tex]PE= F\times X[/tex]
[tex]F=mg[/tex] weight of the mass
X= deflection of the spring
Thus by getting the data from the graph of force versus displacement we can calculate the Potential energy of the spring.
To know more about potential energy follow
https://brainly.com/question/24933254
two charges create 8.00 N of electric force on each other. if you increase their distance to twice its original value, how much electric force do they exert on each other
Answer:
2.00 (right on acellus)
Explanation:
doubling the distance between two charges makes F (8.00) quarter, so you would just do 8.00*1/4
a 20 A fuse is connected in series with a circuit containing a 240 V source. What is the minimum resistance required to prevent the fuse from melting
Answer:
12 ohms
Explanation:
you just divide 240 and 20
240 V/ 20 A = 12 ohms
Friction always acts
in the same direction as motion.
in the opposite direction as motion.
at a 30 degree angle to the direction of motion.
perpendicular to the direction of motion.
Explanation:
friction always acts in the opposite direction as motion.
stay safe healthy and happy...A set of charged plates have an
area of 8.22*10^-4 m^2 and
separation 2.42*10^-5 m. The
plates are charged with
5.24*10^-8 C. What is the
potential difference V between
the plates?
(Unit = V)
pls hurry <3
Answer:
175
Explanation:
its for Acellus
The potential difference is V=1.743*10^-7
The voltage is generally referred to as the electric potential difference and it can be measured using a voltmeter. The electrical potential difference between the two plates is expressed as q=CV.
CALCULATION
we know,
q=CV
q={EA/d}*V
here q= 5.24*10^-8C
A=8.22*10^-5m^2
d=2.42*10^-8m
therefore , C={( 8.85*10^-12)*(8.22*10^-5)}/(2.42*10^-8)
C=3.006*10^-1
q=CV
q/C=V
V=1.743*10^-7
refer https://brainly.com/question/26733095
#SPJ2
Which is a benefit of a scientific model?
A.) It provides a complete image of the concept it is modeling.
B.) It provides an accurate scale of the concept it is modeling.
C.) It provides an accurate visual representation of the texture and coloring of the concept it is modeling.
D.) It provides a useful understanding of the concept it is modeling.
what is the energy of an electromagnetic wave that has a frequency of 5.0 x 10⁵ Hz?
Answer: 3.3 x 10^-28 J
Explanation: just answered on a quiz!! :)
What is the importance of centre of curvature in spherical mirror?
Answer:
Rays of light parallel to the principal axis of a concave mirror will appear to converge on a point in front of the mirror somewhere between the mirror's pole and its center of curvature. That makes this a converging mirror and the point where the rays converge is called the focal point or focus .
Explanation:
hopefully that helps you
Answer:
Rays of light parallel to the principal axis of a concave mirror will appear to converge on a point in front of the mirror somewhere between the mirror's pole and its center of curvature. That makes this a converging mirror and the point where the rays converge is called the focal point or focus .
Explanation:
Hope you have a good day :)
A ball experiences forces of 14 N [N] and 9.2 N [W]. A Free Body diagram is required. What is the acceleration of the ball if its mass is 225 g?
Answer:
First, we can define the North as the positive y-axis, and the East as the positive x-axis.
Here we have two forces:
F₁ = 14N to north
F₂ = 9.2 N to west.
Then the free body diagram will be the one that can be seen below:
Now we want to find the acceleration that the ball experiences if the mass is 225g
Knowing that 1k = 1000g, we can rewrite the mass as:
M = 0.225g
Here we also need to remember the second Newton's law:
F = M*a
Net force equals mass times acceleration.
First, let's find the net force:
F = F₁ + F₂ = 14N*(0, 1) + 9.2N*(-1, 0 )
F = (-9.2N, 14N)
The module of the force is then:
I F I = √( (-9.2N)^2 + (14N)^2) = 16.75 N
Then the acceleration is given by
16.75 N = 0.225kg*a
(16.75 N)/(0.225 kg) = a = 74 m/s^2
If the distance between the magnets tripled what would happen to the force between the 2 magnets?
Answer:
Our Repelling Force Magnet Calculator shows the repelling force on a magnet that happens when another magnet of the same size is placed at some distance from it, with like poles facing one another. The force depends on the distance between the magnets. The farther apart the magnets are, the weaker the force.
Explanation:
A wire carries a current of 6.52 A in a direction that makes an angle of 44.8 degrees with the direction of a magnetic field of strength 0.258 T. What is the magnetic force on a 3.61 m length of wire
Answer:
[tex]F=4.27N[/tex]
Explanation:
From the question we are told that:
Current [tex]I = 6.52 A[/tex]
Angle [tex]\theta= 44.8 \textdegree[/tex]
Magnetic field [tex]B= 0.258 T.[/tex]
Length [tex]l=3.61m[/tex]
Generally the equation for Magnetic force F is mathematically given by
[tex]F=BIlsin\theta[/tex]
Therefore
[tex]F=0.258*6.52*3.61*sin 44.8[/tex]
[tex]F=4.27N[/tex]
What is the net force in the following diagram?
I NEED THIS DONE ASAP I WILL MARK YOU THE BRAINLIEST BUT NO LINKS
Put the correct terms with the correct pictures
Answer:
1. Static Friction
2. Sliding friction
3. Fluid friction
4. is rolling friction
Sorry if i am wrong
Explanation:
How do I solve this problems
A ball is released from a height of 20 metres. Calculate; 1. The time it takes to fall 2. The velocity with which it hits the ground
Answer:
Final velocity of ball = 20 m/s
Explanation:
Given:
Height when ball released = 20meter
Find;
Time taken to fall
Final velocity of ball
Computation:
Initial velocity of ball = 0 m/s
Acceleration due to gravity = 10 m/s²
Using equation of motion;
S = ut + (1/2)(g)(t²)
20 = (0)(t) + (1/2)(10)(t²)
20 = 5(t²)
(t²) = 20 / 5
(t²) = 4
Time taken to fall = 2 second
V = u + at
V = 0 + (10)(2)
Final velocity of ball = 20 m/s
Which statement is correct about the equation for work?
O work = force x distance
work = fulcrum x distance
O work = force x direction
Answer:
work equal to Force times distance
Consider three point charges, q1 = 4.50 C, q2 = 4.50 C, and q3 = 6.30 C, located at the corners of an isosceles triangle. The charges q1 and q2 are 5.00 m apart and form the base. The triangle is 3.50 m high, and q3 is located at the top. Calculate the magnitude and direction of the resultant force on q3.
Answer:
See explanation below
Explanation:
In this case, let's draw the triangle so we can see how the resultant force would be.
In the picture below, you have the drawn, and the procedure to solve this.
Hope this helps
The edge effect in habitats are caused by:
A. habitat fragmentation
B. biological magnification
C. eutrophication
D. destruction of habitat
The edge effect in habitats is caused by habitat fragmentation. Therefore, option A is correct.
Habitat fragmentation refers to the process by which large, continuous habitats are divided into smaller, isolated fragments due to human activities or natural events. It occurs when natural landscapes are altered or disrupted. It results in the fragmentation of once-continuous habitats into smaller patches.
This fragmentation can happen through various means, such as the construction of roads, urban development, agriculture, deforestation, or natural events like wildfires or floods.
Learn more about habitat fragmentation, here:
https://brainly.com/question/14086371
#SPJ2
What is the average kinetic energy (temperature) of
sample A
Explain what cardiovascular exercise is in your own words. Explain the benefits of it and how it is different than muscular strength. Give 3 examples of cardiovascular exercises/activities
What is one problem that you think needs to be solved so that your future is safer for your children?
Answer:
Systemic racism
Explanation:
why do plants on the floor of a rainforest often have reddish-colored leafs?
A, to help absorb as much sunlight as possible.
B, to camouflage themselves from predators.
C, to attract pollinators
D, To warn animals that the leaves are poisonous.
PLEASE HELP BY TODAY THANKS :)
Answer:
c i hope this helps
Explanation:
the shock absorbers in a car act as a big spring with k= 21900 N/m. when a 92.5 kg person gets in, how far does the spring stretch?
Answer: 0.04139m
Explanation:
First, we need to calculate the weight of the man which will be:
Weight = mass × acceleration due to gravity
Weight = mg
Weight = 92.5 × 9.8
Weight = 906.5N
Then, we calculate the force which will be:
F = kx
mg = kx
x = mg/k
x = 906.5/21900
x = 0.04139m.
The spring stretched for 0.04139m.
An event in when a large percentage of all species become extinct is calle
A. biodiversity shift
B. evolutionary shift
C. mass extinction
D. background extinction
A hair dryer uses 1100 W of power
when connected to a 110 V outlet.
What is the resistance of the hair
dryer?
Answer:10
Explanation:acellus
Question 8
Swimming in an open body of water (like a river, lake, or ocean) is different from swimming in a
Answer:
pool
Explanation:
I think
The graph represents the reaction 3H2 + N2 2NH3 as it reaches equilibrium. Based on the graph, which two statements about this reaction are true?
PLEASE NO LINKS OR DOWNLOADS
Answer:A and C
Explanation: I took the test lol
Two statement that are correct based on graph are A, At point 4, the concentration of NH₄, NH₂ and H₂ remain constant, and C, Equilibrium is reached after point 3.
What are graphs?Graphs are the mathematical representation of the data that is easy to understand.
The reaction is [tex]\rm 3H_2 + N_2= 2NH_3[/tex]
The graph shows time on x-axis and concentration on y-axis.
Thus, the correct options are A and C.
Learn more about graphs
https://brainly.com/question/16608196
#SPJ2
what's the main function for the human digested system
Answer:
The function of the digestive system is digestion and absorption. Digestion is the breakdown of food into small molecules, which are then absorbed into the body.
Explanation:I hope it helped
In a certain circuit the number of electrons passing a given point in 3 seconds is 6 x 1014 electrons. What is the current flow in this circuit? (Show all work, including substitution with units)
Answer:
Current = 0.000032 Amperes
Explanation:
Given the following data;
Time, t = 3 seconds
Number of electrons = 6 * 10^14 electrons
Conversion:
First of all, we would convert the number of electrons to charge.
Coulombs = electron charge ÷ 6.2415 * 10^18
Coulombs = (6 * 10^14) ÷ (6.2415 * 10^18)
Coulombs = 0.000096 Coulombs
To find the current;
Mathematically, quantity of charge is given by the formula;
Quantity of charge, Q = current * time
Substituting into the formula, we have;
0.000096 = current * 3
[tex] Current = \frac {0.000096}{3} [/tex]
Current = 0.000032 Amperes
verdadero o falso de La energía interna es la energía térmica asociada al objeto en virtud del movimiento de sus moléculas.
Necesito ayuda, porfa.
Answer:
Es la energía cinética interna total de un objeto debido al movimiento aleatorio de sus ... a es la energía que posee un objeto o cuerpo en virtud del movimiento de sus ... Si el movimiento de estas moléculas y átomos es más rápido, se dice que el ... Por lo tanto, la energía térmica asociada con la conducción resulta de la .
Explanation: