Answer:
An alloy is a mixture or metallic-solid solution composed of two or more elements. Examples of alloys include materials such as brass, pewter, phosphor bronze, amalgam, and steel. Complete solid solution alloys give single solid phase microstructure. Partial solutions give two or more phases that may or may not be homogeneous in distribution, depending on thermal history. An alloy’s properties are usually different from those of its component elements.
Examples of alloys include materials such as brass, pewter, phosphor bronze, amalgam, and steel. Complete solid solution alloys give single solid phase microstructure. Partial solutions give two or more phases that may or may not be homogeneous in distribution, depending on thermal history. An alloy’s properties are usually different from those of its component elements.
image
Steel: Steel is an alloy whose major component is iron.
Alloy constituents are usually measured by mass. An alloy is usually classified as either substitutional or interstitial, depending on its atomic arrangement. In a substitutional alloy, the atoms from each element can occupy the same sites as their counterpart. In interstitial alloys, the atoms do not occupy the same sites. Alloys can be further classified as homogeneous (consisting of a single phase), heterogeneous (consisting of two or more phases), or intermetallic (where there is no distinct boundary between phases).
Alloying a metal involves combining it with one or more other metals or non-metals, which often enhances its properties. For example, steel is stronger than iron, its primary element. Physical properties (density, reactivity, conductivity) of an alloy may not differ greatly from those of its constituent elements, but its engineering properties (tensile strength and shear strength) may be substantially different.
Explanation:
At STP, what is the volume of 4.50 moles of nitrogen gas?
A) 167 L
B) 3420 L
C) 101 L
D) 60.7L
2 You have 500 cm of a liquid
and 500 cm3 of a gas. You
place the liquid and the gas
into separate litre bottles. Do
the liquid and the gas occupy
the same volume in the two
bottles? Explain your answer.
Answer:
No
Explanation:
The gas will have more volume compared to the liquid.
Gases have no definite shape and no volume. They simply assume the shape of any container they are placed into. They will fill up the entirety of the bottle they are placed into.
Liquids have fixed volume although they do not have fixed shape. As they are held with weak intermolecular interactions, they are limited in space.
Therefore, they will maintain that initial volume at which they were introduced into the container.
Liquids generally have a fixed volume and gases do not.Write a complete balanced equation for: magnesium(s) + chloric acid (aq) ? + ?
The definition of is the study of quantitative relationships between the amounts of reactants and products.
a)chemical equations
b) stoichiometry
c) molar mass
d)coefficient
Answer:
b) stoichiometry
Explanation:
Stoichiometry is the study of quantitative relationships between the amounts of reactants and products.
The word is coined from two Greek words; stoicheon which means atom and metron which means measurement. It deals with chemical calculations based on the elementary particles of matter. Such calculations highlights the relationships between the composition or chemical reactions of matter and the mole.1)
Radioactive materials have unstable
A)
nuclei
B)
electrons.
Delectron clouds.
D)
area of atom outside of nucleus.
Question 16
Which of the following is an example of a chemical property of matter?
А
reaction with another element
B
density of an element
C
color of an element
D
freezing point of element
Explanation:
A reaction with another element
other choices are physical property
Answer:
A. reaction with another element
QUICK! Which best explains how the collisions of materials in space contribute to the formation of layers in protoplanets?
A: The materials undergo decay when they collide, which results in the heating and subsequent melting and rising of materials.
B: The collisions release heat, which results in the heating and subsequent melting, sinking, and rising of materials.
C: The materials undergo decay when they collide, which results in the cooling and subsequent hardening and sinking of materials.
D: The collisions absorb heat, which results in the cooling and subsequent hardening and rising of materials.
Answer:
B. The collisions release heat, which results in the heating and subsequent melting, sinking, and rising of materials.
Explanation:
Got it correct on edge
Answer:
the answer is B: The collisions release heat, which results in the heating and subsequent melting, sinking, and rising of materials.
Explanation:
I took the test
which element exists as a diatomic molecule at STP
The elements with standard temperature ,pressure, are the diatomic molecules like hydrogen, nitrogen, chlorine and oxygen.
What is diatomic molecule ?Two atoms are chemically linked in order to create diatomic molecules. They make up a homonuclear diatomic molecule if the two atoms are the same, such in the oxygen molecule (O2), for example in the case. If the atoms are different.
Diatomic molecules are two-atom-only molecules, which can contain the same or different chemical components. A diatomic molecule is a structure made up of two atoms that were already connected together. Examples include carbon monoxide, oxygen, nitrogen, and hydrogen (H2) (CO).
Thus, hydrogen, oxygen, nitrogen are the element exists as a diatomic molecule at STP.
To learn more about diatomic molecule refer the link below;
https://brainly.com/question/11619743
#SPJ2
what are the minerals responsible for the production of co2 gas in the kiln
Answer:
Explanation:limestone
CO2 is emitted from the calcination process of limestone, from combustion of fuels in the kiln, as well as from power generation.
Which forces can be classified as intramolecular?
London dispersion forces
van der Waals forces
hydrogen bonds
covalent bonds
Answer:
D) Covalent Bonds
Explanation:
Quizlet says so
Among the given options the intramolecular force is covalent bonding. Covalent bond is formed between two nonmetals by sharing of electrons. All other given forces are intermolecular.
What is covalent bonding ?A covalent bond is formed between two non-metals through sharing of valence electrons between atoms. For example carbon and oxygen are non metals forming the covalent compound CO.
The number of shared pair of electron depends on the valence of each atoms. For example in HCl, both atoms shares one electron to each other.
In a covalent compound, if the difference in electronegativity between two atoms is significant, the shared pair of electrons attracts towards the highly electronegative atom and resulting charge separation make them polar compounds.
Find more on covalent compounds:
brainly.com/question/21505413
#SPJ6
how is the weighted average mass related to atomic mass
Answer:
The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit (amu, also known as daltons. The atomic mass is a weighted average of all of the isotopes of that element, in which the mass of each isotope is multiplied by the abundance of that particular isotope.
Which statement best explains the energy change that will occur when the
ball hits the catcher's mitt?
O A. The ball and the catcher's mitt will both transform each other's
potential energy to kinetic energy.
B. The catcher's mitt will transform the ball's kinetic energy to
potential energy.
C. The ball and the catcher's mitt will each transfer potential energy
to the other.
D. The ball will transfer kinetic energy to the catcher's mitt.
SUBMIE
Answer:the answer is D
Explanation:
I have already taken the exam. Hope this helps
The kinetic energy of the ball is transmitted to the catcher's mitt and the total energy remains conserved.
What is Energy?It is defined as the capability of a body for doing work. Its SI unit is joules. Example - Kinetic energy, potential energy, heat energy etc.
Given is that a ball hits the catcher's mitt.
Now, when ball is in the motion in the air than it is moving with some velocity. Assume that velocity to be v m/s. Then, its kinetic energy will be -
E[K] = 1/2mv²
Therefore, it has kinetic energy. Now as the ball is caught by the player, the ball stops and its kinetic energy is transmitted into the player's mitt. From law of conservation of energy
E[K] + E[mitt] = E[mitt] + E[K]
1/2mv² + 0 = 1/2mv² + 0
So the energy is conserved and transferred.
Thus, the kinetic energy of the ball is transmitted to the catcher's mitt.
Therefore, the kinetic energy of the ball is transmitted to the catcher's mitt and the total energy remains conserved.
To solve more questions on Energy transformations, visit the link below-
https://brainly.com/question/15301095
#SPJ2
In the following reaction, which species is reduced? Au(s) + 3NO3-(aq) + 6H+(aq) → Au3+(aq) + NO(g) + 3H2O (l) H+ N+5 O2- H2O Au
Answer:
NO3-
Explanation:
Given the reaction equation;
Au(s) + 3NO3-(aq) + 6H+(aq)→Au3+(aq) + 3NO2(g) + 3H2O (l).
We can consider the oxidation states of species on the left and right hand sides of the reaction equation;
Au is in zero oxidation state on the left hand side and an oxidation state of +3 on the righthand side.
NO3- is in oxidation state of +5 on the righthand side and NO2 is in + 4 oxidation state.
H+ is in + 1 oxidation state on both the left and right hand sides of the reaction equation.
Since reduction has to do with a decrease in oxidation number, it follows that NO3- was reduced in the reaction.
A 26.9 g rock rolls down the Hill at a speed of 81.9 m/s. what is the kinetic energy of the rock?
Answer:
90.21 J
Explanation:
Given that,
Mass of a rock, m = 26.9 g = 0.0269 kg
Speed of the rock, v = 81.9 m/s
We need to find the kinetic energy of the rock. It can be calculated using the formula as follows :
[tex]E=\dfrac{1}{2}mv^2\\\\E=\dfrac{1}{2}\times 0.0269\times 81.9^2\\\\E=90.21\ J[/tex]
So, the kinetic energy of the rock is 90.21 J.
f the solubility of sodium chloride (NaCl) is 30.6 g/100 mL of H2O at a given temperature, how many grams of NaCl can be dissolved in 250.0 mL of H2O
Answer:
76.5 grams
Explanation:
Solubility of sodium chloride = [tex]\dfrac{30.6}{100}=0.306\ \text{g/mL}[/tex]
Now volume of water is 250 mL
We have to find the amount of NaCl that can be dissolved in the above mentioned amount of water
Let the mass of NaCl that can be dissolved be m so
[tex]\dfrac{m}{250}=0.306\\\Rightarrow m=250\times0.306\\\Rightarrow m=76.5\ \text{g}[/tex]
The mass of NaCl that can be dissolved is 76.5 grams.
I Need Help!!! 50 POINTS AND BRAINLIEST!!! Fill out the study guide ASAP!!!
Please and thank you. (If you give me all of the correct answers I will create a 100 point question for you.
Answer: I saw the other question with screen shot Thanks
4. Answer, Like gases, plasmas have no fixed shape or volume, and are less dense than solids or liquids. But unlike ordinary gases, plasmas are made up of atoms in which some or all of the electrons have been stripped away and positively charged nuclei, called ions, roam freely.
5. Answer The energy associated with an object's motion is called kinetic energy. A speeding bullet, a walking person, and electromagnetic radiation like light all have kinetic energy. Another example of kinetic energy is the energy associated with the constant, random bouncing of atoms or molecules.
6.Answer is solid
Molecules in the solid phase have the least amount of energy, while gas particles have the greatest amount of energy. The temperature of a substance is a measure of the average kinetic energy of the particles.
7. Answer Water behaves differently to most other substances because, in its solid state (ice), its particles are less densely packed than in its liquid state. This is why ice floats.
8. Answer 212 degrees F.
Sea Level: Water boils at 212 degrees F. and simmers at 190 degrees F.
9. Answer When an object is heated the motion of the particles increases as the particles become more energetic. If it is cooled the motion of the particles decreases as they lose energy.
10. Answer CHEMISTRY TERM PHASE CHANGE
Fusion/Melting Freezing Vaporization/Boilin Condensation Sublimation Deposition Solid to a Liquid Liquid to a Solid Liquid to a Gas Gas to a Liquid Solid to a Gas Gas to a Solid
11. Answer is Energy is consumed (endothermic) to melt ice (solid to liquid) so the opposite process (liquid to solid) must be exothermic.
12.In simple terms, the endothermic reactions absorb energy from the surrounding that is in the form of heat. On the other hand, an exothermic reaction releases energy into the surrounding of the system.
ok alright. But where’s the question?
Acceleration of an object
Answer:
velocity
Explanation:
The definition of acceleration is: Acceleration is a vector quantity that is defined as the rate at which an object changes its velocity. An object is accelerating if it is changing its velocity.
The diagram shows a conglomerate (mixture) rock. Some of the rock particles are labeled. State which rock group this conglomerate belongs to and explain your answer.
Other than a base and a sugar unit, which of the following is a component of a nucleotide?
A. sulfate group
B. nitrate group
C. phosphate group
D. carbonate group
Answer:
C. phosphate group
Explanation:
took quiz on edg
Answer:
C
Explanation:
EDGE 2022
Can you use mass and volume to predict whether an object will sink or float in water? Explain your thinking.
Answer:
Yes. u can because its easy to tell if an item will sink or float usually by the weight or the width
Explanation:
True or false: Protons have a positive charge, while electrons have a negative charge.
The answer is TRUE
Protons do have positive charge while electrons have a negative charge
In what form is carbon found in the atmosphere?
Answer:
In the atmosphere carbon is found as carbon dioxide
Explanation:
Which is the average kinetic energy of the individual particles of a substance?
Answer: Temperature
Explanation: Temperature is a measure of average kinetic energy of particles in an object. The hotter the substance, higher is the average kinetic energy of its constituent particles. When we heat a substance, the particles that constitute the substance gain some energy and begin to move faster.
Which of the following are most reactive?
Helium is the second most abundant element in the universe, but it is rare in Earth’s atmosphere. Most of the helium used to fill balloons and blimps must be extracted from Earth’s crust. How do you think this helium formed?
Explanation:
Helium is produced in radioactive process that occurs in deep and underground formations. They differ from other atmospheric gases. These radioactive decay of heavier nuclides that are unstable started about the time when the earth was formed.
As they decay they give off lighter particles that can easily be broken down into more stable ones. One of the main product of the decay is alpha particles. They have the same atomic structure as helium These materials are trapped in underground formations.Which of the following statements is true? Fusion breaks apart nuclei; fission puts them together. Fission breaks apart nuclei; fusion puts them together. Fission and fusion have identical reactions.
Answers:
Fission breaks apart nuclei
Fusion puts them together.
======================================================
Explanation:
The term "fission" is related to the term "fissure" which means "a cut or divide", often describing a geologic feature of the earth (eg: a crack in the rock).
Fusion is the idea of putting things together, which is the opposite of fission. The term doesn't have to apply to nuclear fusion. It could be something like the fusing of two ideas to create one new idea.
Answer:
the 2nd one
Explanation:
How many atoms are in 2.3 moles Au?
Answer:
6.02×10^23atoms of au
Answer:
i think 3
Explanation:
calculate the percent by mass of 4.35g of Na I dissolved in 105g of water
We are given:
Mass of Na added = 4.35 grams
Mass of water = 105 grams
Mass Percent of Na:
Total mass of the solution = mass of solute + mass of solvent
Total mass of the solution = 4.35 + 105 = 109.35 grams
Mass percent of solute = (mass of solute / mass of solution) * 100
Mass percent of Solute = (4.35 / 109.35) * 100
Mass percent = 3.978 %
Can someone please tell me the answer
Answer:
52.068 amu
Explanation:
To calculate the average atomic mass of chromium, you have to first multiply the abundance of an isotope with its mass.
49.946 × 0.0435 = 2.173
51.941 × 0.838 = 43.527
52.941 × 0.0235 = 1.244
53.939 × 0.095 = 5.124
Next, add up all of the values, and you will get the average atomic mass.
2.173 + 45.527 + 1.244 + 5.124 = 52.068 amu
Which equation is balanced using the correct formulas and coefficients?
A. NaCl2 + F2 → NaF2 + Cl2
B. 2 NaCl + F2 → NaF + Cl2
C. 2 NaCl + F2 → 2 NaF + Cl2
D. O NaCl + F → NaF + CI
Answer:
answer is gonna be B
Explanation:
NaCl+F2= NaF+Cl2