Answer:
The current is halved
Explanation:
The relationship between the current and the resistance is given by Ohm's Law, as follows:
[tex]V = IR\\I = \frac{V}{R}[/tex]
where,
V = Voltage
I = Current
R = Resistance
Therefore, if we double the resistance:
[tex]I' = \frac{V}{2R}\\\\I' = \frac{1}{2}I[/tex]
Hence the correct option is:
The current is halved
Answer:
A
Explanation:
Please help, I need help with this question please
Answer:
The car's kinetic energy is 751,500 J.
The car's potential energy is 0 J.
Explanation:
The kinetic energy equation is used as KE = 1/2mv^2 and the potential energy equation is used as PE = mgh. Your mass for the car is 1670 kg and the velocity would be 30 m/s. 30^2 would equal to 900 and you multiply that by 1670 for 1,503,000. Divide that number by 2 since there is 1/2 behind it to get your car's kinetic energy which is 751,500 J.
The potential energy which is calculated by mass times gravitational energy times height would be 0 J. Because the car is at a standard height on the ground, it would make sense for the height to be 0 meters and when multiplying it, your total potential energy would be 0 J.
a spherical mirror produces a magnification of -1 on a screen placed at a distance of 40cm from the mirror i) write the type of mirror ii) What is the focal length of the mirror
Answer:
f =-20 cm
Explanation:
Given that,
The magnification of a spherical mirror, m = -1
The image distance, v = 40 cm (for negative magnification)
The magnification of a concave mirror is negative. The mirror showing -1 magnification is a concave mirror.
Let f be the focal length of the mirror. We know that,
[tex]m=\dfrac{-v}{u}\\\\-1=\dfrac{-v}{u}\\\\v=u[/tex]
Object distance, u = -40 cm
Using mirror's formula i.e.
[tex]\dfrac{1}{f}=\dfrac{1}{u}+\dfrac{1}{v}\\\\f=\dfrac{1}{\dfrac{1}{-40}+\dfrac{1}{-40}}\\\\f=-20\ cm[/tex]
So, the focal length of the mirror is 20 cm.
two identical 1.00 x 10^-4 C charges have an electric potential energy of 100 J. how far apart are they. (Unit = m)
Answer: 0.899
Explanation:
acellus
Answer: 0.899
Explanation: It's right in acellus I just did it
Which of the following statements best describes the method of energy conservation known as cogeneration?
Answer:
heat and power
Explanation:
is the simultaneous production of electricity and heat both of which are used
Find the voltage across the 15 Q resistor.
[?] V
No links please
Answer:
Explanation:
same idea as before Liam, first, find the parallel resistance in 35 || 20
(35*20) / (35+20) = 700 / 55 = 12.727272 ohms
now add the 12.727272 + 15 = 27.727272 ohms total resistance
V = IR
10 = I * 27.727272
10 / 27.727272 = I
0.360655 = I
V = IR (again, but across the 15 ohm resistor)
V = 0.360655 * 15
V = 5.4098
When studying atoms, scientists can ignore the ______ force between charged particles that make up the atoms because it is many millions of times smaller than other forces in the atom.
Gravitational
Constant
Normal
Fricitional
Answer:
Gravitational
Explanation:
When studying atoms, scientists can ignore the gravitational force between charged particles that make up the atoms because it is many millions of times smaller than other forces in the atom.
Answer:
Gravitational
Explanation:
Please, I need to finish my homework.
An object is to the left of a convex mirror. Describe the two rays needed to indicate the location and height of the image. Additionally, state what side of the mirror the image is on and whether it is real or virtual.
Answer:
mark me as the brainly plss
A 13 ohm resistor and a 7 ohm resistor are connected in series in a circuit with a 12 volt battery. Assuming negligible internal resistance in the battery, the current in the first resistor listed will be
Answer:
0.923
Explanation:
Use the formula current equals voltage /resistance
6. Why do telescopes have to have a good motorized drive system to move them quickly and smoothly? a. because the Earth is rotating, with the telescope attached to it b. because astronomers typically have to look at many objects in the sky in a few minutes c. because all objects in the sky vary in brightness very quickly d. because the telescope can then be moved out from under the clouds to where it is clear e. You can’t fool me, telescopes never move; they stay in one position all night
Answer: The correct option is A ( because the Earth is rotating, with the telescope attached to it).
Explanation:
A telescope is a device that is used mostly for viewing distant objects. It's an optical instruments as it's made up of lens and curved mirror depending on the type of telescope. The first telescope was invented by Hans Lippershey in 1608. It is used extensively in war,sea and astronomical discoveries.
Parts of a typical telescope includes:
--> the optical system: this is the most important part of a telescope. This determines the optical aperture of the telescope, how bright or how sharp the formed image would be. This can be a lens or a mirror.
--> Eyepiece: this magnifies the image formed.
--> Motorized drive system: these drive system are mounted with the telescope to aid in a quick and smooth movement while detecting, for example, celestial bodies. This part of the telescope is important as the telescope is mounted on the earth surface which rotates about its axis from west to east. Since the drive system is motorized, it can automatically move very smoothly from east to west at exactly the same rate that Earth is rotating from west to east, so it can continue to point at the object being observed.
If the resistance of an electric iron is 40 and a current of 2.2 A flows
through the resistance. Find the voltage between two points. *
Answer:
88 volts
Explanation:
Ohm's law gives the formula : I = V/R
In this case, since we are solving for voltage, you simply rearrange the equation to be : V = I * R
Therefore, given the resistance and current, you just plug in the numbers.
Voltage = 40 ohms * 2.2 amperes
Voltage = 88 volts
Which statement is the best interpretation of the ray diagram shown?
A. A convex lens forms a larger, virtual image. B. A convex lens forms a larger, real image.
C. A convex mirror forms a larger, real image.
D. A convex mirror forms a larger, virtual image.
Answer:
a convex lens forms a larger, virtual image
Explanation:
The ray diagram shows that a convex lens forms a larger, virtual image. So, option a is correct.
What is meant by a convex mirror?A convex is defined as a lens in which the reflecting surface is bent inwards. It is thicker in the middle and thinner at the edges.
Here,
The convex lenses are the type of lens that can converge the beam of light coming from outside and reflect the rays and focus them on a point at the other side.
Convex lens is also known as a converging lens.
The image of the object here is formed on the opposite side of the object, so it is a virtual image that has been formed here.
The size of the image formed here is larger when compared to the size of the object. Thus larger image formed.
Thus the convex lens formed a larger and virtual image of the object here.
Hence,
The ray diagram shows that a convex lens forms a larger, virtual image. So, option a is correct.
To learn more about, convex lens, click:
https://brainly.com/question/12213784
#SPJ7
-183° degrees Celsius to kelvin
Answer:
90.15K
Explanation:
The formula is x°C + 273.15 = yK
Answer:
(-183°C) = 90.15K
Explanation:
-183°C is given
Now,
K = °C + 273
K = (-183) + 273.15
K = 90.15
Thus, (-183°C) = 90.15K
-TheUnknownScientist
A 150kg motorcycle starts from rest and accelerates at a constant rate along with a distance of 350m. The applied force is 250N and the coefficient of kinetic friction is 0.03. What is the net force applied to the motorcycle?
Answer:
205N
Explanation:
The net force (F) is the difference between the applied force([tex]F_{A}[/tex]) and the kinetic frictional force([tex]F_{R}[/tex]). i.e
F = [tex]F_{A}[/tex] - [tex]F_{R}[/tex] -----------------(i)
Note that;
[tex]F_{R}[/tex] = μmg
Where;
μ = coefficient of kinetic friction
m = mass of the body
g = acceleration due to gravity = 10m/s²
Equation (i) then becomes;
F = [tex]F_{A}[/tex] - μmg -------------------(ii)
Given from question;
m = mass of motorcycle = 150kg
μ = 0.03
[tex]F_{A}[/tex] = 250N
Substitute these values into equation (ii) as follows;
F = 250 - (0.03 x 150 x 10)
F = 250 - (45)
F = 205N
Therefore, the net force applied to the motorcycle is 205N
a soccer ball is kicked and left
the ground at angle an 45° above the horizantal, moving at 25 m/s.
calculate for the:
a. hang time of the ball
b. initial horizontal velocity
c. initial vertical velocity
d. maximum height
e. the range travelled by ball
Answer:
Explanation:
Considering that this is parabolic motion, we know that the time the ball is in the air begins the instant it leaves the ground, reaches up to its max height, and then begins falling until it reaches the ground. Duh, right? Some important things happen during this trip. There are a few things we need to know in order to even begin the problem. Parabolic motion has x and y coordinates because it is 2-dimmensional; the acceleration in the x dimension is not the same as the acceleration in the y dimension; the velocity of an object at its max height is always 0; the time it takes to reach its max height (where the max height is half the distance the object travels) is half the time it takes to make the whole trip. Yikes. That's a lot to know and much to remember! Don't you just LOVE physics!?
For a. the hang time is the time the ball was in the air. Some of that stuff we talked about above is pertinent to solving this problem. We know that the velocity of the ball is 0 at its max height, and we also know that if we find the time it takes to reach its max height, we can double that number to find how long it was in the air for the whole trip. Use the one-dimensional equation
[tex]v=v_0+at[/tex] to find out how long it took to reach the max height. Even though we don't yet know the max height, we DO know that the velocity at that point is 0. BUT before we do that, since we are working in the y-dimension only, it would behoove us (benefit us) to find the velocity particular to this dimension. We are going to answer c. first, then backtrack.
c. wants the initial vertical velocity. That is found in the magnitude of the "blanket" or generic velocity times the sin of the angle, namely:
[tex]V_y=25sin(45)[/tex] so
[tex]V_y=[/tex] 18 m/s Now we can use that as the initial upwards velocity in part a:
[tex]v=v_0+at[/tex] and filling in:
0 = 18 + (-9.8)t and
-18 = -9.8t so
t = 1.8 seconds. But remember, this is only half the time it was in the air. The whole trip, then, takes 2(1.8) which is
t = 3.6 seconds
That's a and c. Now for b:
b. asks for the x component of the velocity:
[tex]V_x=Vcos\theta[/tex] which works out to be the same as the vertical velocity, since the sin and cos of 45 degrees is the same:
[tex]V_x=25cos45[/tex] and
[tex]V_x=[/tex] 18 m/s
Onto d:
d. wants the max height. Remember, it took 1.8 seconds to get to the max height, so using yet another one-dimensional equation:
Δx = v₀t + [tex]\frac{1}{2}at^2[/tex] where Δx is the displacement, v₀ is the initial upwards velocity, a is the pull of gravity, and t is the time it takes to reach that max height (Δx, our unknown). Filling in:
Δx = [tex]18(1.8)+\frac{1}{2}(-9.8)(1.8)^2[/tex] and if you do the rounding correctly, you'll end up with this:
Δx = 32 - 16 so
the max height, Δx, is 16 meters.
e. wants the range. That translates to the distance the ball traveled. This is found in a glorified version of d = rt, where d is displacement, r is velocity, and t is...well, time (that doesn't change):
Δx = vt so
Δx = 18(3.6) remember that the ball was in the air for a total of 3.6 seconds, so
Δx = 65 meters.
Phew!!!!! That's a lot! I suggest you learn your physics or this will make you insane by the end of the course!
Answer:
3
Explanation:
After a nucleus with 85 protons undergoes alpha decay, it has
? protons.
Answer:
After a nucleus with 85 protons undergoes alpha decay, it has 83 protons.
Explanation:
In an alpha particle there are two protons
In the given substance's nucleus, there are total of 85 protons
After the decay, the proton number reduce
The current proton number after decay is
85 -2 = 83
After a nucleus with 85 protons undergoes alpha decay, it has 83 protons.
The number of protons in this nucleus after it undergoes an alpha decay is 83 protons.
Given the following data:
Number of protons in nucleus = 85 protonsTo determine the number of protons in this nucleus after it undergoes an alpha decay:
The chemical symbol for an alpha particle is:
[tex]^{4}_{2} \alpha[/tex]
Therefore, we can deduce the following points about an alpha particle:
Mass number = 4Number of protons = 2After an alpha decay:
Protons = [tex]85-2[/tex]
Protons = 83
Therefore, the number of protons in this nucleus after it undergoes an alpha decay is 83 protons.
Read more: https://brainly.com/question/17438493
Light refracts when it
Please help! I will mark you as brainliest!
Research revealed that patients who received chemotherapy in a hospital setting subsequently experienced
a(n) immune response when they again visited the hospital. In this example, the would be
classified as the US.
O enhanced; hospital
O suppressed; hospital
о
enhanced; chemotherapy
O suppressed; chemotherapy
Answer: suppressed; chemotherapy
Explanation:
Chemotherapy is typically a drug treatment whereby powerful chemicals are used to kill the fast growing cells in ones body. Chemotherapy is usually used in the treatments of cancer.
Research revealed that patients who received chemotherapy in a hospital setting subsequently experienced
a (suppressed) immune response when they again visited the hospital. In this example, the (chemotherapy) would be classified as the US.
HELP PLZZZ I will give brainliest to who ever helps me the fastest plzzzzzzzz.
Answer: space race automobiles
Explanation:
they were used in space to get to planets
Which diagram represent light with the longest wavelength ?
Answer:
the answer is the diagram B
You are an astronomer who wants to study a faint star in the process of being born, which gives off most of its faint radiation in the infra-red. Which of the following would NOT be a step you would want to take? a. heat your telescope, so its delicate optics are not cold b. try to have your telescope as high above the layers of water vapor in the Earth's atmosphere as possible c. shield your telescope from the radiation given off by your graduate students d. isolate your telescope in very cold surroundings e. make sure your telescope optics are kept as free of dust as possible
Answer:
a. heat your telescope, so its delicate optics are not cold
Explanation:
If star is just born and giving off faint radiation in infrared. These radiation would be long range infra red radiation as the star is just born having less surface temperature.
In order to locate the star through telescope, it must be positioned at higher altitudes so that water vapor is minimum. The radiation from other heating objects might alter the light coming through the cosmos. Therefore, it is mandatory to shield the telescope from foreign radiations.
For the same reason mentioned above the telescope must have cold surroundings. Moreover, optics of the telescope must also be kept free from dust and dirt for clear vision.
However, Heating of telescope in order to safe optics from cold must not be done. This would change the wavelength of long range infra red radiations from star and hence, its location.
The loudness of a sound depends on the sound wave's ________. A. frequency B. pitch C. amplitude D. density
Answer:
Frequency or amplitude
Explanation:
nun
which kind of energy is the most common by-product of the energy transformation?
Answer:
kinetic energy
Explanation:
it is most common
What happens when you disconnect an electromagnet from battery?
A.it wil explode
B.it will continue to attract non-metals
C.it will stop from attracting metals
E.nothing will happen
Answer:
b.
If you disconnect the wire, the magnetic field disappears and the nail is no longer a magnet. ... The current flowing through the wire makes the wire hot and drains the battery quickly.
Explanation:
Marine science what is climate change?
Answer:
In marine ecosystems, climate change is associated with concurrent shifts in temperature, circulation, stratification, nutrient input, oxygen content, and ocean acidification. There are also strong linkages between climate and species distributions, phenology, and demography.
Explanation:
Mark her brainliest
If you have 5.6 grams of a radioactive isotope with a half-life of 150 years:
How much of the isotope will you have left after 750 years?
Answer:
0.175g
Explanation:
A = A02^-(t/hl)
= (5.6g)2^-(750/150)
= 0.175g
Calculate Kinetic Energy The potential energy of a swing is 200 J
at its highest point and 50 J at its lowest point. If mechanical
energy is conserved, what is the kinetic energy of the swing at its
lowest point?
Answer:
150J
Explanation:
Pi = Pf + Kf
200 = 50 + Kf
---> Kf = 150J
The kinetic energy of the swing at its lowest point is 150 J.
What is energy?Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.
Given in the question the potential energy of a swing is 200 J at its highest point and 50 J at its lowest point
Pi = Pf + K E
200 = 50 + K E
K E = 150 J
The kinetic energy of the swing at its lowest point is 150 J.
To learn more about energy refer to the link:
brainly.com/question/1932868
#SPJ2
The ship was travelling 77 meters per second, 35 degrees above the x-axis Northeast. Determine the magnitude and direction of the horizontal vector component, Vx
Answer:
vₓ = 63.07 m/s
Explanation:
The horizontal vector component of the velocity can be found by the following formula:
[tex]v_x = vCos\theta[/tex]
where,
vₓ = horizontal vector component of velocity = ?
v = magnitude of velocity = 77 m/s
θ = angle with x-axis = 35°
Therefore,
[tex]v_x = (77\ m/s)Cos\ 35^o[/tex]
vₓ = 63.07 m/s
La onda que se muestra en la figura recorre la distancia AB= d =75m en t = 0.15s. Determine: A. La rapidez de propagación B. La longitud de onda C. La frecuencia
ah=d=75m= 0.15s A B C Hola cómo estás das que ases de bueno amiga
Three resistors of values 2 Q, 3 Q and 5 Q are connected in series with a battery of voltage 6.0 V. Calculate the current through each of the resistors, and the current through the battery.
Answer:
Current = 0.6 A
Explanation:
Given that,
Three resistors 2 ohms, 3 ohms and 5 ohms are connected in series with a battery of voltage 6 V.
In series combination of resistors, the current through each resistor is the same while the voltage divides.
The equivalent resistance in this case is given by :
[tex]R_{eq}=R_1+R_2+....[/tex]
Put all the values,
[tex]R_{eq}=2+3+5\\\\R_{eq}=10\ \Omega[/tex]
Let I be the current. Using Ohm's law,
[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{6}{10}\\\\I=0.6\ A[/tex]
So, the current through each resistor and the current through the battery is equal to 0.6 A.
I WILL GIVE BRAINLYEST!!!!1
Examine the following image. Which ocean-floor feature is indicated by the arrow in the image? (10 points)
Public Domain
Group of answer choices
Abyssal plain
Continental slope
Guyot
Seamount
Answer:
Continental slope
Answer: The answer is Seamount. A seamount is a submarine mountain located on oceanic crust near mid-ocean. The image shows a very long seamount in Massachusetts and that is formed by volcanic activity in New England Seamounts.