Explanation:
M(Bapo3) = 216m/mol
n = 3.8 mole
m = M × n = 216 × 3.8 = 820.8g
Qualitatively explain the effect of changing concentration of Cu2+ on voltage using your experimental observations and the Keq values below. (No calculations are required).
(a) Cu^2+(aq) + 4NH3(aq) ⇄ [Cu(NH^3)4]^2+(aq) Keq = 1.2 x 10^12
(b) CuS(s) ⇄ Cu^2+(aq) + S^2-(aq) , Keq = 8.5 x 10^-45
Cu/Zn = 0.525 V
after 1 drop NH3: 0.505 V
after 2 drops NH3: 0.435 V
Cu/Zn = 0.510 V
after 1 drop Na2S: 0.452 V
after 2 drops Na2S: 0.393 V
When a balloon containing 635 mL of air is taken from sea level (at standard pressure) to a higher altitude, the balloon expands to 829 mL. What is the air pressure at this new altitude (in atm)?
Answer:
0.766atm
Explanation:
Boyles law
P1V1=P2V2
1×635=P2×829
P2=635/829
P2=0.766atm
How many molecules of sodium fluoride (NaF) are found in 7.2 moles of sodium fluoride?
Answer:
well please answer me it's question too after you get it
Explanation:
i am also stucked in that question
No. of molecules of any substance is one mole
= Avogadro's Number = (6.022 x 10^23)
So, no. of molecules in 7.2 moles of sodium fluoride
= 7.2 × (6.022 x 10^23)
= 4.33584^24
When CO2(g) is put in a sealed container at 730 K and a pressure of 10.0 atm and is heated to 1420 K , the pressure rises to 24.1 atm . Some of the CO2 decomposes to CO and O2.
Calculate the mole percent of CO2 that decomposes.
Express your answer using two significant figures.
Answer:
48%
Explanation:
Based on Gay-Lussac's law, the pressure is directly proportional to the temperature. To solve this question we must assume the temperature increases and all CO2 remains without reaction. The equation is:
P1T2 = P2T1
Where Pis pressure and T absolute temperature of 1, initial state and 2, final state of the gas:
P1 = 10.0atm
T2 = 1420K
P2 = ?
T1 = 730K
P2 = 10.0atm*1420K / 730K
P2 = 19.45 atm
The CO2 reacts as follows:
2CO2 → 2CO+ O2
Where 2 moles of gas react producing 3 moles of gas
Assuming the 100% of CO2 react, the pressure will be:
19.45atm * (3mol / 2mol) = 29.175atm
As the pressure rises just to 24.1atm the moles that react are:
24.1atm * (2mol / 19.45atm) = 2.48 moles of gas are present
The increase in moles is of 0.48 moles, a 100% express an increase of 1mol. The mole percent that descomposes is:
0.48mol / 1mol * 100 = 48%
True or false: A skeleton equation in chemistry shows the relative amounts of all materials in the reaction
Answer:
false im pretty sure.
Calculate the volume, in liters, occupied by 0.775 mol of oxygen gas at STP.
Answer:
17.4 L
Explanation:
Step 1: Given data
Moles of oxygen (n): 0.775 molPressure of the gas (P): 1 atm (standard pressure)Temperature of the gas (T): 273.15 K (standard temperature)Step 2: Calculate the volume occupied by 0.775 moles of oxygen at standard temperature and pressure (STP)
At STP, 1 mole of an ideal gas occupies 22.4 L.
0.775 mol × 22.4 L/1 mol = 17.4 L
If it takes 720. mL of 0.00125 M Mg(OH)2 to neutralize 425 mL of an HCI
solution, what is the concentration of the HCI? Mg(OH)2 + HCl →MgCl2
+ H20
Answer:
0.004235 M
Explanation:
The neutralization reaction of this question is given as follows:
Mg(OH)2 + 2HCl → MgCl2 + 2H2O
Using the formula below:
CaVa/CbVb = na/nb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (mL)
Vb = volume of base (mL)
na = number of moles of acid = 2
nb = number of moles of base = 1
From the information provided in this question;
Ca = ?
Cb = 0.00125 M
Va = 425 mL
Vb = 720 mL
na (HCl) = 2
nb = (Mg(OH)2) = 1
Using the formula; CaVa/CbVb = na/nb
Ca × 425/0.00125 × 720 = 2/1
425Ca/0.9 = 2
472.2Ca = 2
Ca = 2/472.2
Ca = 0.004235 M
You dissolve 14 g of [tex]Mg(NO_{3} )_{2}[/tex] in water and dilute to 750 mL. What is the molarity of this solution?
Show your work
an erlenmeyer flask contains 15.00mL of 0.030 M HCI before titration. 5.00 mL of 0.050 of M NaOH is added to the HCI in the flask during titration. What is the mole ratio of acid (HCI) to base (NaOH) in the balanced neutralization equation?
0.05 to 0.03
1:1
1:2
which expression. gives the actual moles of base added?
0.050x5.00
0.030x0.015
0.050x0.005
How many moles of H+ will be present following neautralization?
0.25
0.00025
0.025
Answer:
1.1
0.050*0.005
0.00025
Explanation:
why does a plant have a cell wall and a cell membrane?
ASAP Pls have to turn it in at 11:00pm
Answer:
The cell wall surrounds the plasma membrane and provides the cell tensile strength and protection. ... The cell wall surrounds the plasma membrane of plant cells and provides tensile strength and protection against mechanical and osmotic stress.
hope It Helps U
Please Mark me As brainlist
Calculate the percent composition of Ca3P2
Answer:
Ca - 66%, P - 34%
Explanation:
So, this is the formula we can use to find the amount of each element:
Element count * Atomic mass = Mass
Plug in our elements for this:
Ca - 3*40.078=120.234
P - 2*30.973=61.946
Now, to find the percentage of mass, we must find total mass, and divide the two elements mass count by this total mass:
120.234+61.946=182.18
Now divide each element mass by the total mass:
Ca - 120.234/182.18=0.6599(Round to 0.65)
P - 61.946/182.18=0.34002(Round to 0.34)
Then multiply both numbers by 100 to get the percentage:
Ca - 65%
P - 34%
So these our your two answer!
Hope this helps!
An empirical formula calculation gives a molar ratio of 1.0 oxygen, 4.8 hydrogen, 4.1 carbon and 1.8 nitrogen. If the molecular mass is approximately 200 amu, what is the molecular formula
Answer:
[tex]C_8H_{10}O_2N_4[/tex]
Explanation:
Hello there!
In this case, according to the given information about the empirical formula of this compound, we can infer that these mole ratios can be rounded to the following whole numbers in order to find the empirical formula:
[tex]C_4H_5ON_2[/tex]
Whose molar mass is 97.09 amu and thus, the ratio of the molecular to the empirical molar mass is:
[tex]200/97.09=2.1[/tex]
Which is almost a factor of 2; and therefore, the resulting molecular formula is:
[tex]C_8H_{10}O_2N_4[/tex]
Regards!
Carbon dioxide had how many nonbonding electron pairs in its electron arrangement?
A. 2
B. 4
C. 8
D. 6
E. 3
Answer: A.) 2 is the answer.
Explanation:
What is the thermal efficiency of an engine that takes n moles of diatomic ideal gas through the cycle
Answer:
The thermal efficiency of an engine is [tex]0.15[/tex] that is 15%
Explanation:
Specific heat of a gas at constant volume is
[tex]C_{v}=\frac{fR}{2}[/tex]
here, [tex]f=[/tex]degree of freedom
[tex]R=[/tex]universal gas constant
Thermal efficiency of a cycle is
[tex]\frac{total workdone}{gross heat absorbed}[/tex]
Gross heat absorbed is amount of heat that absorbed.
ω[tex]=P_{o} V_{o}[/tex]
[tex]Q_{AB}=[/tex]Δ[tex]V_{AB}+[/tex]ω[tex]_{AB}[/tex][tex]=nC_{v}(T_{f}-T_{i} )[/tex]
[tex]=n\frac{f}{2}(RT_{f}-RT_{i} )[/tex][tex]=\frac{f}{2}(P_{o}V_{o} )[/tex]
[tex]Q_{BC}=n(\frac{f}{2}+1 )R(T_{f}-T_{i} )[/tex]
[tex]=(\frac{f}{2} +1)(4P_{o}V_{o}-2P_{o}V_{o} )[/tex]=[tex]=(\frac{f}{2}+1)2P_{o}V_{o}[/tex]
[tex]Q_{CD}=-ve and Q_{DA}=-ve[/tex] these 2 are not the part of gross heat
η[tex]=\frac{P_{o}V_{o} }{(\frac{3f}{2}+2 )(P_{o}V_{o})}[/tex]
[tex]=\frac{1}{(\frac{3f}{2}+2 )}[/tex]
For monoatomic gas [tex]f=3[/tex]
η[tex]=\frac{2}{13}[/tex]
[tex]=0.15[/tex]
HELP ME ASAP PLEASE
I need the answers I’m in a hurry
Answer: First box----Hail
Second Box-------Snow
Thrid Box-------Sleet
Forth Box-----Rain
Hope that helped! :)
Which best explains the relationship between evaporation and temperature?
• A liquid evaporates slower at lower temperatures because the molecules are more spread apart and are not pushed
as easily from the liquid's surface.
O A liquid evaporates faster at lower temperatures becaus the attractions are decreased and more particles can
escape the surface of the liquid.
© A liquid evaporates slower at higher temperatures because the vapor pressure of the liquid is higher, SO fewer
molecules can escape the surface.
• A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome
attractions in the liquid.
Answer: D
Explanation:
liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Answer:
D. A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
The diameter of a circle is 17 cm. Find its circumference in terms of \piπ.
Answer: sorry I didnt know the answer it wont let me get off
Explanation:
Fill the missing blank
i’m generally confused about this so if anyone could help me it would mean a lot!!!!
Answer:
The answers to your questions are given below.
Explanation:
1. The symbol of Zinc is Zn
2. Determination of the proton number
Atomic number is simply defined as the number of protons in the nucleus of an atom. Mathematically, it is expressed:
Atomic number = proton number
Atomic number = 30
Therefore,
Proton number = 30
3. Determination of the neutron number
Mass Number = 65
Proton number = 30
Neutron number =?
Mass number = Proton + Neutron
65 = 30 + Neutron
Collect like terms
65 – 30 = Neutron
35 = Neutron
Thus,
Neutron number = 35
4. Determination of the electron number
Since the element is in it's ground state (i.e it has no charge), thus, the number of protons of the element is the same as number of electrons i.e
Electron number = proton number
Proton number = 30
Thus,
Electron number = 30
If 15L of neon is at 25C is allowed to expand to 45L. What is the new temperature to maintain constant pressure?
Answer:
[tex]T_2=894.45K=621.30\°C[/tex]
Explanation:
Hell there!
In this case, according to the given information, it turns out possible for us to calculate the new temperature by applying the Charles' law as a directly proportional relationship between temperature and volume:
[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]
Thus, we solve for the final temperature, T2, as shown below (make sure T1 is in Kelvins):
[tex]T_2=\frac{V_2T_1}{V_1} \\\\T_2=\frac{(25+273.15)K*45L}{15L}\\\\T_2=894.45K=621.30\°C[/tex]
Regards!
help ! thank u / ill give brainlist !
Give two examples of energy transformations that occur throughout the journey to or on the planet.
Answer:
Our bodies convert chemical energy in our food into mechanical energy for us to move.
An electric fan transforms electrical energy into kinetic energy
Reword it tho
Hope this helps!!
PPLLLLLZZZZZ HELPPPPPPPPP ME WITH THIS QUESTION BRAINLIEST ANY ANSWERS WOULD BE GREATLY APPRECIATED :) chemical reaction will stop when the limiting reactant is used up.Question 1 options:
True
False
I believe that this statement is true
A mixture of 14.0 grams of H2, 84.0 grams of N2, and 64.0 grams of O2 are placed in a flask. The partial pressure of the O2 is 78.00 torr. What is the total pressure in the flask
Answer:
[tex]P_{tot}=465.27torr[/tex]
Explanation:
Hello there!
In this case, according to the given information, it will be possible for us to use the Dalton's law, in order to solve this problem. However, we first need to calculate the mole fraction of oxygen by firstly calculating the moles of each gas:
[tex]n_{H_2}=\frac{14.0g}{2.02g/mol} =6.93mol\\\\n_{N_2}=\frac{84.0g}{28.02g/mol}=3.00mol\\\\n_{O_2}=\frac{64.0}{16.00g/mol} =2.00mol[/tex]
Next, we calculate such mole fraction as follows:
[tex]x_{O_2}=\frac{2}{6.93+3+2} =0.168[/tex]
Then, given the following equation:
[tex]P_{O_2}=P_{tot}*x_{O_2}[/tex]
So we solve for the total pressure as follows:
[tex]P_{tot}=\frac{P_{O_2}}{x_{O_2}} \\\\P_{tot}=\frac{78.00torr}{0.168} \\\\P_{tot}=465.27torr[/tex]
Regards!
Help.
Work needs to be shown
show equations and how you did it
Answer:
436.8 mmHg.
Explanation:
From the question given above, the following data were obtained:
Total pressure (Pₜ) = 0.93 atm
Pressure of N₂ (Pₙ₂) = 270 mmHg
Pressure of O₂ (Pₒ₂) =?
Next, we shall convert the total pressure to mmHg . This can be obtained as follow:
1 atm = 760 mmHg
Therefore,
0.93 atm = 0.93 × 760 mmHg / 1 atm
0.93 atm = 706.8 mmHg
Finally, we shall determine the pressure of the O₂. This can be obtained as follow:
Total pressure (Pₜ) = 706.8 mmHg
Pressure of N₂ (Pₙ₂) = 270 mmHg
Pressure of O₂ (Pₒ₂) =?
Pₜ = Pₙ₂ + Pₒ₂
706.8 = 270 + Pₒ₂
Collect like terms
706.8 – 270 = Pₒ₂
436.8 = Pₒ₂
Pₒ₂ = 436.8 mmHg
Thus, the pressure of O₂ is 436.8 mmHg
it refers to the length of the entire path the object travelled
Answer:
Path length is the overall distance traveled following the path of where the object travel. ... Displacement is the distance from the starting point of the object to its final point irregardless where it travels.
Please help and explain how to do it need the answer asap, please.
Answer:
45 and 20 c2 Or4
Explanation:
Rachard is studying a sample of a substance. The sample is in a large, triangle-shaped flask. Rachard moves the sample to a small, rectangular container. Both containers are closed. Below is an image of the containers used by Rachard. She notices that the shape and the volume of the substance both change when the sample is moved. In which state of matter is the substance?
How many moles are in 482 mL of a 1.91 M solution of NaBr?
Answer:
0.921 moles
Explanation:
1.91 M means 1.91 moles/liter
482 mL = 0.482 L
0.482 L × 1.91 moles/liter = 0.92062 moles
Climate change as we know it today is
characterized by a(n) __change in the
earth's temperature.
slow
abrupt (sudden)
rough
What would you expect to be the electron-group arrangement around atom A in the following case? Give the ideal bond angles and the direction of any expected deviation.
Answer:
The answer is "Tetrahedral".
Explanation:
The carbon atom of approximately [tex]109.5^{\circ}[/tex] with four attachments. Its general form is one of a tetrahedron: a polyhedron consisting of 4 triangular sides, six straight edges, and four vertex corners from all faces equilateral triangles. The triangular pyramid is often referred to as the triangular pyramid.
A radioactive nuclide is used to detect eye tumors. An atom of this radionuclide contains 15 protons, 15 electrons, and
17 neutrons. Which is symbol of this radionuclide?
Answer: ³²P
Explanation:
The radionuclide in question is known as Phosphorus-32. It is an isotope of Phosphorus that is radioactive and has one more neutron than the normal phosphorus does.
Phosphorus does not exist in nature and is created artificially by bombarding the normal stable phosphorus with neutrons. Due to its radioactive nature, it has proven to be useful in the medical industry where it has been used to detect eye tumors as well as in treating some diseases.