Explanation:
A) fission: Iodine-140 (atomic number = 53)
B) fusion: 1 neutron
C) fission: Uranium-233 (atomic number = 92)
what are the best topics to write a project work on EVS and Chemistry
Answer:
It is better to do chemistry
Explanation:
So that you will learn more of chemicals
Please help I need on this please and thank you
Explanation:
amount of baking soda = 2.01 g
---> 2.01 g NaHCO3 × (1 mol NaHCO3/84.007 g NaHCO3)
= 0.024 mol NaHCO3
mass of the product = 1.28 g
Possible reactions:
NaHCO3(s) ---> NaOH(s) + CO2(g)
0.024 mol NaHCO3 × (1 mol NaOH/1 mol NaHCO3)
= 0.024 mol NaOH × (39.997 g NaOH/1.mol NaOH)
= 0.96 g NaOH
2NaHCO3(s) ---> Na2O(s) + 2CO2(g) + H2O(g)
0.024 mol NaHCO3 × (1 mol Na2O/2 mol NaHCO3)
= 0.012 mol Na2O × (61.9789 g Na2O)
= 0.73 g Na2O
2NaHCO3(s) ---> Na2CO3(s) + CO2(g) + H2O(g)
0.024 mol NaHCO3 × (1 mol Na2CO3/2 mol NaHCO3)
= 0.012 mol Na2CO3 × (105.9888 g Na2CO3/1 mol Na2CO3)
= 1.27 g Na2CO3
Conclusion:
Based on the mass of the product in the crucible and comparing it with the predicted product mass in different reactions, I conclude that Na2CO3 is the most likely product in the crucible.
At the Sprite bottling plant where the temperature is at 235K, each bottle can hold 3.80 atm of pressurized carbon dioxide gas (to make the soda fizzy). At room temperature 298K what is the new pressure?
Answer:
P2 = 4.76 atm
Explanation:
Given:
T1 = 235K. P1 = 3.80 atm
T2 = 298K. P2 = ?
Here, we use Gay-Lussac's law:
P1/T1 = P2/T2
Solving for P2, we get
P2 = (T2/T1)P1
= (298K/238K)(3.80 atm)
= 4.76 atm
3. A PS6 plugged into a 120 V outlet uses 3 Amps. What is the Resistance rating of
the power cord?
voltage: V=
current: 1 =
resistance: R=
V=IxR
1=VR R
Underline/Bold Which Equation we are going to use:
= V
Plug in the numbers from above and solve for our answer:
Answer:
R = 40 ohms
Explanation:
Given that,
The voltage of outlet, V = 120 V
Current flowing through the device, I = 3 A
We need to find the Resistance rating of the power cord. Let the resistance is R. We know that,
Ohm's law, V = IR
Put all the values,
[tex]R=\dfrac{V}{I}\\\\R=\dfrac{120}{3}\\\\R=40\ \Omega[/tex]
So, the resistance rating of the power cord is equal to 40 ohms.
A student was asked to determine the activity of four unknown metals W,X,Y and, Z.
Answer:
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
The activity of four unknown metals based on their chemical changes is option B.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ3
Which statement best explains what causes the phase change from solid ice to liquid water?
a.Heat is released as ice turns into liquid water.
b.The mass increases when ice turns into liquid water.
c.Heat is absorbed as ice turns into liquid water.
d.The hydrogen bonds prevent the absorption of heat.
Gather data: experiment with a variety of initial concentrations of no2 and n2o4. for each set of initial concentrations, use the gizmo to determine the equilibrium concentrations of each substance. in the last column, find kc for that trial. run three trials for each set of initial conditions.
Solution :
[tex]$H_2 +I_2\rightleftharpoons 2HI$[/tex]
Initial concentration Equilibrium concentration [tex]$K_c=\frac{[HI]^2}{[H_2][I_2]}$[/tex]
(mol/L) (mol/L)
[tex]$[H_2]$[/tex] [tex]$[I_2]$[/tex] [tex]$[HI]$[/tex] [tex]$[H_2]$[/tex] [tex]$[I_2]$[/tex] [tex]$[HI]$[/tex]
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.38 \times 10^{-2}$[/tex] 0 [tex]$1.14 \times10^{-2}$[/tex] [tex]$0.12 \times 10^{-2}$[/tex] [tex]$2.52 \times 10^{-2}$[/tex] 46.42
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.68 \times 10^{-2}$[/tex] 0 [tex]$0.92 \times10^{-2}$[/tex] [tex]$0.20 \times 10^{-2}$[/tex] [tex]$2.96 \times 10^{-2}$[/tex] 47.61
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.98 \times 10^{-2}$[/tex] 0 [tex]$0.77 \times10^{-2}$[/tex] [tex]$0.31 \times 10^{-2}$[/tex] [tex]$3.34 \times 10^{-2}$[/tex] 46.73
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.76 \times 10^{-2}$[/tex] 0 [tex]$0.92 \times10^{-2}$[/tex] [tex]$0.22 \times 10^{-2}$[/tex] [tex]$3.08 \times 10^{-2}$[/tex] 46.86
[tex]$0$[/tex] [tex]$0$[/tex] [tex]$3.04 \times 10^{-2}$[/tex] [tex]$0.345 \times10^{-2}$[/tex] [tex]$0.345 \times 10^{-2}$[/tex] [tex]$2.35 \times 10^{-2}$[/tex] 46.39
[tex]$0$[/tex] [tex]$0$[/tex] [tex]$7.58 \times 10^{-2}$[/tex] [tex]$0.86 \times10^{-2}$[/tex] [tex]$0.86 \times 10^{-2}$[/tex] [tex]$5.86 \times 10^{-2}$[/tex] 46.42
Average [tex]$K_c=46.738$[/tex]
50 POINTS PLEASE HELP!
A gas diffuses 1/7 times faster than hydrogen gas (H2).
What is the molar mass of the gas?
100.10 g/mol
98.78 g/mol
86.68 g/mol
79.98 g/mol
Answer: The molar mass of the gas is 9.878 g/mol.
Explanation:
According to Graham's law, the rate of diffusion is inversely proportional to square root of molar mass of gas.
[tex]Rate = \frac{1}{\sqrt{M}}[/tex]
where,
M = molar mass of gas
As given gas diffuses 1/7 times faster than hydrogen gas. So, its molar mass is calculated as follows.
[tex]\frac{R_{1}}{R_{2}} = \sqrt{\frac{M_{2}}{M_{1}}}\\[/tex]
where,
[tex]M_{1}[/tex] = molar mass of hydrogen gas
[tex]M_{2}[/tex] = molar mass of another given gas
[tex]R_{1}[/tex] = rate of diffusion of hydrogen
[tex]R_{2}[/tex] = rate of diffusion of another given gas = [tex]\frac{1}{7}R_{1}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{R_{1}}{R_{2}} = \sqrt{\frac{M_{2}}{M_{1}}}\\\frac{R_{1}}{\frac{1}{7}R_{1}} = \sqrt{\frac{M_{2}}{2}}\\7 \times 1.414 = M_{2}\\M_{2} = 9.878 g/mol[/tex]
Thus, we can conclude that the molar mass of the gas is 9.878 g/mol.
Answer:
98.78 g/mol
Explanation:
Just took the test
A molecule with one lone pair and three bond pair
▪︎Ammonia
▪︎carbon tetrachloride
choose correct option
It's ammonia (NH3).....
Answer:
A molecule with one lone pair and three bond pair
- Ammonia
Help me plz plz bbbbb
Answer:
The respiratory system is the network of organs and tissues that help you breathe. basically your airways, lungs, and blood vessels so you quite literally need these to survive I mean your muscles need oxygen to function and your brain needs oxygen to function so without your respiratory system you wouldn't be able to move much and you would quickly pass out and die from the lack of oxygen to your brain there are other body processes that need oxygen as well but these are just two examples.
Explanation:
Answer:
Maybe it’s dark ??????????????
Explanation:
Hm
In which location would a free neutron from a decaying U-235 atom be most likely to cause another atom to split?
there you go. giving answers to most questions on the chem test (10th grade)
Answer:
The appropriate option would be B . Explanation: This is due to the reason enriched U has insignificant polluting influences. Along these lines, the U -235 particles focuses together and the possibilty of high energy neutron bombarding another Uranium -235 molecule in the region is high.
Explanation:
Answer:
thank u so much for the answers ! !! How do u get the answers???
Explanation:
[check out their questions for the answers guys chem final]
what is the proper formulanGaseous Butane (C4H10) that reacts with Gaseous Oxygen (O2) in a combustion reaction to form Carbon dioxide Gas and Gaseous Water (Dihydrogen monoxide).
Answer:
2C₄H₁₀(g) + 13O₂(g) —> 8CO₂(g) + 10H₂O(g)
Explanation:
The balanced equation for the reaction between butane and oxygen to produce carbon dioxide and water can be written as follow:
C₄H₁₀ + O₂ —> CO₂ + H₂O
Next, we shall balanced the equation. This is illustrated below:
C₄H₁₀ + O₂ —> CO₂ + H₂O
There are 4 atoms of C on the left side and 1 atom on the right side. It can be balance by writing 4 before CO₂ as shown below:
C₄H₁₀ + O₂ —> 4CO₂ + H₂O
There are 10 atoms of H on the left side and 2 atoms on the right side. It can be balance by writing 5 before H₂O as shown below:
C₄H₁₀ + O₂ —> 4CO₂ + 5H₂O
There are 2 atoms of O on the left side and a total of 13 atoms on the right side. It can be balance by writing 13/2 before O₂ as shown below:
C₄H₁₀ + 13/2O₂ —> 4CO₂ + 5H₂O
Multiply through by 2 to express in whole number ratio.
2C₄H₁₀(g) + 13O₂(g) —> 8CO₂(g) + 10H₂O(g)
Thus, the equation is balanced.
what is difference between asexual or sexual reproduction
Explanation:
asexual reproduction involves 1 parent and produces offspring that are genetically identical to each other and parent.
Sexual reproduction involves 2 parents and produces offspring that are genetically unique.
define restivity and conductivity?
Answer:
Electrical resistivity is a property of a material that tells you how much it resists the flow of electric current, while conductivity quantifies how easily current flows.
How does the difference in air pressure masses affect wind speed? When low air pressure and high air pressure masses are far apart, air moves quickly from low to high pressure areas. When low air pressure and high air pressure masses are far apart, air moves quickly from high to low pressure areas. When low air pressure and high air pressure masses are close together, air moves quickly from high pressure to low pressure areas. When low air pressure and high air pressure masses are close together, air moves quickly from low to high pressure areas; this creates stronger wind speeds.
Answer:
it is from the currents the movements cause
Explanation:
Answer:The greater the difference in pressure, the faster the winds. When a high- and a low-pressure air mass are far apart, air moves slowly from high to low pressure. When a high- and a low-pressure air mass are far apart, air moves quickly from high to low pressure.
Explanation:
HELP ASAPPP!!! ON EXAM!
The arrangement of electrons within an atom is called it's...
a
Electron Flow
b
Electron Configuration
c
Atomic Number
d
Ionization Energy
Answer:
The arrangement of electrons within an atom is called electron configuration
If I help you, will you help other people?
Actually "this is the worst question i've ever seen use the internet bud" why don't you do that.
answer asap
Food caught on fire on a restaurant's stove. How much thermal energy was present?
A. only a little compared to the total amount of energy
B. a lot of the energy was thermal
C. none of the energy was thermal
D. it was mostly potential energy, not thermal
an evacuated cylinder has a volume of 50 liters. if 20 liters of nitrogen fas and 20 liters of oxygen gas are pumped into this evacuated cylinder, how much of the cylinder is filled with the two gasses?
The nitrogen gas and the oxygen gas will both occupy 50 liters.
Volume of a gasLet us recall form the kinetic theory of gases that a gas is in constant random motion. The gas does not have a specific volume but takes on the volume of the container since it will expand and fill the container.
The volume occupied by the two gases will be the same as the volume of the container. Hence, the nitrogen gas and the oxygen gas will both occupy 50 liters.
Learn more about volume of a gas: https://brainly.com/question/4519953
Answer:
B. The entire container because gases will expand to fill it.
Explanation:
I took to test, plus it directly says this in the lesson
The carbon dioxide is released when limestone is heated during the
production of _____?
Carbon dioxide is released when limestone is heated during the production of [tex]\sf\purple{cement}[/tex]. ✔
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
What is the molarity of a sodium hydroxide solution if 25 mL of the solution is neutralized by 69.5 mL of 1.5 M HCl?
Answer:
4.17M
Explanation:
m1v1/m2v2=n1/n2
When something is hot , its atom has more energy
True or False
Will mark as brainliest if the answer is correct
2
CuCl2 +4KI -> 2 Cul + 4 KCI + 12
Answer:
Explanation:
This is an example of a limiting reactant question, and is very common as a general chemistry problem.
We first see the balanced equation, that is:
2CuCl2+4KI→2CuI+4KCl+I2
We first need to find the limiting reactant
We see that 0.56 g of copper(II) chloride (CuCl2) reacts with 0.64 g of potassium iodide (KI) . So, let's convert those amounts into moles.
Copper(II) chloride has a molar mass of
134.45 g/mol . So in 0.56 g of copper(II) chloride, then there exist
0.56g134.45g/mol≈4.17⋅10−3 mol
Potassium iodide has a molar mass of
166 g/mol . So, in 0.64 g of potassium iodide, there exist
if it wrong i am sorry
Imagine you had HCl with a concentration of exactly 0.10 mol/dm3. If 0.023 dm3 of a sodium hydroxide solution, NaOH (aq), could exactly neutralize 0.040 dm3 of the HCl solution, what is the concentration of the NaOH (aq)
Answer:
Explanation:
Step 1: Calculate the amount of sodium hydroxide in moles
Volume of sodium hydroxide solution = 25.0 ÷ 1,000 = 0.0250 dm3
Rearrange:
Concentration in mol/dm3 =
Amount of solutein mol = concentration in mol/dm3 × volume in dm3
Amount of sodium hydroxide = 0.100 × 0.0250
= 0.00250 mol
Step 2: Find the amount of hydrochloric acid in moles
The balanced equation is: NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
So the mole ratio NaOH:HCl is 1:1
Therefore 0.00250 mol of NaOH reacts with 0.00250 mol of HCl
Step 3: Calculate the concentration of hydrochloric acid in mol/dm3
Volume of hydrochloric acid = 20.00 ÷ 1000 = 0.0200 dm3
Concentration in mol/dm3 =
Concentration in mol/dm3 =
= 0.125 mol/dm3
Step 4: Calculate the concentration of hydrochloric acid in g/dm3
Relative formula mass of HCl = 1 + 35.5 = 36.5
Mass = relative formula mass × amount
Mass of HCl = 36.5 × 0.125
= 4.56 g
So concentration = 4.56 g/dm3
chemical formula is given.
CO→C+O
What does the formula describe?
A.
It describes a mixture being separated by a physical process.
B
It describes an atom being separated by a chemical process.
C
It describes an element being broken down into the atoms from which it was formed.
D
It describes a compound being broken down into the elements from which it was formed.
Answer:
D . It describes a compound being broken down into the elements from which it was formed.
Explanation:
A compound consists of two or more elements chemically combined together in a chemical reaction. The compound carbon monoxide is represented by the chemical symbol, CO. This means that it contains 1 atom of the carbon element and 1 atom of the Oxygen element.
This compound is formed when carbon is directly oxidized in a limited supply of oxygen. In the above reaction, this compound is disintegrated into its individual components, namely, carbon and oxygen.
A student has 475 mL of a 4.5 M HNO3 solution. He leaves the top of the container Monday morning the volume of solution is now 347 mL. What is the conventtration of the solution now
Answer:
6.1 M
Explanation:
Step 1: Calculate the moles of HNO₃ in the initial solution
A student has 475 mL (0.475 L) of a 4.5 M HNO₃ (4.5 mol HNO₃/ L) solution.
0.475 L × 4.5 mol HNO₃/ L = 2.1 mol HNO₃
He leaves the top of the container open, so water will evaporate, but the moles of HNO₃ will remain the same.
Step 2: Calculate the final concentration of the solution
2.1 moles of HNO₃ are in 347 mL (0.347 L) of solution.
[HNO₃] = 2.1 mol / 0.347 L = 6.1 M
What is the specific heat capacity of silver metal if 110.00 g of the metal
absorbs 396 J of heat and the temperature rises 15.0°C ?
Answer:
"0.24 J/g.k" is the appropriate solution.
Explanation:
Mass of substance,
m = 110.00 g
Heat,
q = 396 J
Change in temperature,
ΔT = 15.0°C
Now,
The specific heat will be:
⇒ [tex]q=ms \Delta T[/tex]
On putting the given values, we get
⇒ [tex]396=110.00\times s\times 15.0[/tex]
⇒ [tex]396=s\times 1650[/tex]
⇒ [tex]s=\frac{396}{1650}[/tex]
⇒ [tex]=0.24 \ J/g.k[/tex]
Science
How is the total magnification of a
cell calculated?
If HA, an acid, is 15 percent dissociated in a 2.00 molar solution, what is the Ka for the solution?
A.5.3 × 10-2
B.6.4 × 10-3
C.1.1 × 10-2
D.1.2 × 10-2
Answer:
A. 5.3 X 10^-2
Explanation:
I got 100 on PLATO
2CO +0, 200, what is the mole ratio of carbon monoxide to carbon
dioxide
A 1.2
B 2.2
C 2:1
D 3:1
Answer:
B. 2.2
Explanation:
1: A50 L balloon is at 4 atm of pressure. What is the volume at 2 atm of pressure?
Answer:
100 L
Explanation:
Use Boyle's Law, p1v1 = p2v2.
p1 = 4 atm
v1 = 50L
p2 = 2 atm
v2 = ?
p1v1 = p2v2
(4 atm) (50L) = (2 atm) (v2)
v2 = (4 atm)(50L) / (2 atm) = 100 L