Answer:
94 moles of Carbon
Explanation:
From the question,
Using Avogadro's constant
1 mole of every element contains 6.03×10²³ atoms of the element
If 1 mole of Carbon contains 6.03×10²³ atoms of Carbon,
Then, x mole of Carbon will contain 5.67×10²⁵ atoms of Carbon
1 mole of C ⇒ 6.03×10²³ atoms of C
x mole of C ⇒ 5.67×10²⁵ atoms of C
solve for x
x = (1× 5.67×10²⁵)/6.03×10²³
x = 94.03 moles of Carbon
x ≈ 94 moles of Carbon
Identify the decay mode
Please answer asap no explanation needed
(Look at picture)
Answer:
1921 :3 espero y te ayude crack
Please help me with this question!!
Answer: 824.6 g of NaCl are produced from 500.0 g of chlorine.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex] [tex]\text{Moles of} Cl_2=\frac{500.00g}{71g/mol}=7.04moles[/tex]
[tex]2Na+Cl_2\rightarrow 2NaCl[/tex]
According to stoichiometry :
1 mole of [tex]Cl_2[/tex] produce = 2 moles of [tex]NaCl[/tex]
Thus 7.04 moles of [tex]Cl_2[/tex] will produce=[tex]\frac{2}{1}\times 7.04=14.08moles[/tex] of [tex]NaCl[/tex]
Mass of [tex]NaCl=moles\times {\text {Molar mass}}=14.08moles\times 58.5g/mol=824.26g[/tex]
Thus 824.6 g of NaCl are produced from 500.0 g of chlorine.
Where is the youngest part of the ocean floor found?
A. along the deep sea trenches
B. where ocean sediments are the thickest
C. near ocean ridges
D. where Earth's magnetic field changes polarity
Answer:
the youngest crust of the ocean floor can be found near the seafloor
a 5 g ice cube starts life at -1 C if 2182.5 j are added to it what will be the final temperature upon his demise ?
Answer:
Final Temp = 23.92°C
Explanation:
ΔH(total) = (m·c·ΔT)ice + (m·ΔH(f))melt'g + (m·c·ΔT)water
2182.5j = (5g)(2.092j/g·°C)(1°C) + (5g)(334.56j/g) + (5g)(4.184j/g·°C)(ΔT)
(2182.5 - 10.46 - 1672.8)j = 20.92j/°C·ΔT
ΔT = (2182.5 - 10.46 - 1672.8)j / 20.92j/°C = 23.92°C
Since the melting ice starts and ends at 0°C and is then warmed to 23.92°C then the temperature change is also the final temp of the water based upon given energy input values.
What process is being shown by the movement of particles from one flower to another? Please help me fast.
Answer:
its diffusion can i get brainly pleasee tyyy
Initially a NaOH solution was standardized by titration with a sample of potassium hydrogen phthalate, KHC8H4O4, a monoprotic acid often used as a primary standard. A sample of pure KHC8H4O4 weighing 1.518 grams was dissolved in water and titrated with the NaOH solution. To reach the equivalence point, 26.90 milliliters of base was required. Calculate the molarity o
Answer:
0.2763M NaOH
Explanation:
Based on the reaction of hydrogen phtalate, KHP, with sodium hydroxide, NaOH:
KHP + NaOH → KNaP + H₂O
1 mole of KHP reacts per mole of NaOH.
In the equivalence point, the moles of NaOH added = Moles of KHP that were dissolved.
Thus, to solve this question, we must find the moles of KHP = Moles NaOH. With the moles and the volume of NaOH required to reach the equivalence point we can find molarity of NaOH solution:
Moles KHP = Moles NaOH (Molar mass KHP = 204.22g/mol):
1.518g * (1mol / 204.22g) = 7.433x10⁻³ moles NaOH
In 26.90mL = 0.0269L:
7.433x10⁻³ moles NaOH / 0.02690L
0.2763M NaOHFind the kinetic energy of the horse using KE=1/2 mv².
A 500-kilogram horse runs at 5 meters/second. The horse’s kinetic energy is
[blank] joules.
Answer:
6250
Explanation:
so m=500 and v=5
so v²=25
using the equation we can do 1/2 x 500 x 25 = 6250
(01.06 LC)
Which statement is true about the substances present in a mixture?
They always consist of the same element.
They are always in the same state of matter.
They can be separated by physical methods.
They can only be separated by chemical methods.
Answer:
They can be separated by physical methods.
Explanation:
Substances in a mixture are not subjected to anything that may change their chemical structure, so they are physical all throughout the process. Therefore, they can be separated using physical methods.
Answer:
They can be separated by physical methods.
Explanation:
I took the final
I need help with this
Answer:
D. 108 grams/100g of H2O
Explanation:
I found the line KNO3 and when the line is at x value 60, it has the y value 108
id.k how to explain it it's just on the graph, ig just look at where it intersects both values
hope this helps
3. Add labels for mass extinction and adaptive radiation:
Answer:
I'm assuming you need to label above the lines. So, above the line where the Cretaceous period ends is mass extinction and where the bracket lies is adaptive radiation.
Explanation:
Mass extinctions are periods of time where the organisms are essentially wiped out in an extremely brief period of time. You can see how the species just drops off. Adaptive radiation occurs when there is a diversification of a group of organisms as evident by the rise in the number of marine animal groups shown by the bracketed area.
arrange the following atoms na, ca, a1, b, br, f in order of increasing electronegativity?
Explanation:
f, br, b, A1, CA, na in order of increasing electronegativity
What has caused air quality in United States to improve/get better since the 1950s?
Answer:
better mileage on cars, took lead out of paint, smaller packaging like for delivery and store products, EPA laws updating
Answer:
Reducing pollution from transportation sources has led to healthier air for Americans. In cities, smog has been visibly reduced.
Explanation:
i hope this helped
If we use 18 moles of H2 how many moles of H2O do we make? Use this chemical equation: 6H2 + O2 → 3H2O
9 mol H₂O
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
BracketsParenthesisExponentsMultiplicationDivisionAdditionSubtractionLeft to RightChemistry
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisAnalyzing reactions RxNExplanation:Step 1: Define
[RxN - Balanced] 6H₂ + O₂ → 3H₂O
[Given] 18 mol H₂
[Solve] mol H₂O
Step 2: Identify Conversions
[RxN] 6 mol H₂ → 3 mol H₂O
Step 3: Stoich
[DA] Set up conversion: [tex]\displaystyle 18 \ mol \ H_2(\frac{3 \ mol \ H_2O}{6 \ mol \ H_2})[/tex][DA] Simplify: [tex]\displaystyle 18 \ mol \ H_2(\frac{1 \ mol \ H_2O}{2 \ mol \ H_2})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 9 \ mol \ H_2O[/tex]Answer:
9 mol H₂O
give me brainliest pls
What method can be used to separate benzoic acid and potassium carbonate
Answer:
To separate the components, a water wash may be attempted to remove benzoic acid, but benzoic acid is not particularly water-soluble due to its nonpolar aromatic ring, and only small amounts would be extracted into the aqueous layer
The method that can be used to separate Benzoic acid and potassium carbonate is : The application of water wash separation method
Benzoic acid is slightly soluble in cold water but becomes more soluble as the temperature of water is increased. Water wash separation method is a methodology used for the selective removal of unwanted compounds in a mixture.
Separation method based on solubility water wash methodprecipitationThe separation of benzoic acid and potassium carbonate is based on the solubility differences between Benzoic acid and potassium carbonate when dissolved in a solvent ( water ) therefore the water wash separation method is the most effective method.
Hence we can conclude that The method that can be used to separate Benzoic acid and potassium carbonate is : The application of water wash separation method.
Learn more about separation methods : https://brainly.com/question/735172
What is the molar mass of H2CO3
Answer:
Molar mass of H2CO3 : 62.03 g/mol
Please answer this
?????????
Answer:
bbfbtbryn'(tbtehtgrntn'ey(yntehtheyjey'y'y'yyt'yj't'yjyyngggengt-(jh
Explanation:
How are cellular respiration and photosynthesis related?
O A. They both use light energy to produce chemical energy.
O B. They both use ATP energy to produce radiant energy.
C. All of their chemical products are gases found in the atmosphere.
O D. The chemical products of one are the reactants of the other.
Answer: D. The chemical products of one are the reactants of the other.
I just took the quiz
Cellular respiration and photosynthesis related as the chemical products of one are the reactants of the other and the correct option is option D.
What is the difference between Respiration and Photosynthesis?Respiration is something that occurs in all living organisms. Thus, it is a process that converts oxygen and glucose into carbon dioxide and water and ultimately makes energy for your body cells.
On the other hand, photosynthesis takes place in green plants that contain chlorophyll. In this process, they make use of sunlight and water for converting it into energy.
Plants release oxygen which is a by-product of photosynthesis, and we breathe in oxygen so that our cells can carry out cellular respiration and generate ATP.
Therefore, Cellular respiration and photosynthesis related as the chemical products of one are the reactants of the other and the correct option is option D.
Learn more about the Difference between Respiration and Photosynthesis, here:
https://brainly.com/question/31232878
#SPJ5
10 The graph below compares the density, in grams per cubic centimeter (g/cm'), of
four different substances.
DENSITY OF SUBSTANCES
20
15
Density (g/cm)
10
5.
0
w
Y
Z
Substances
Based on information from the graph, which of the following best compares the
physical properties of two of the substances?
F. Substance X has less mass than substance Y has.
G. Substance W has less volume than substance X has.
H. Substance Y would have less mass than substance Z would have if they had the
same volume.
1. Substance Z would have less mass than substance W would have if they had the
same volume.
Answer: the awnser is A
Explanation:
Edge 2020
A reaction in the laboratory yields 5.98 g KAI(SO2)2, How many moles of potassium aluminum
sulfate were produced?
Answer:
0.0308 mol
Explanation:
In order to convert from grams of any given substance to moles, we need to use its molar mass:
Molar mass of KAI(SO₂)₂ = MM of K + MM of Al + (MM of S + 2*MM of O)*2Molar mass of KAI(SO₂)₂ = 194 g/molNow we calculate the number of moles of KAI(SO₂)₂ contained in 5.98 g:
5.98 g ÷ 194 g/mol = 0.0308 molA light bulb has a resistance of 96.8 Ω. What current flows through the bulb when it is connected to a 120 V source of electrical energy?
Answer:
I = 1.23 A
Explanation:
Given that,
The resistance of the lightbulb, R = 96.8 Ω
Voltage, V = 120 V
We need to find the current flows through the lightbulb. Let the current be I. We can use the ohm's law to find it i.e.
[tex]V=IR\\\\I=\dfrac{V}{R}\\\\I=\dfrac{120}{96.8}\\\\I=1.23\ A[/tex]
So, the current flows through the bulb is 1.23 A.
Luisa likes to drink water from a plastic bottle. She knows the bottles were formed from synthetic polymers that were created in a chemical reaction. She also knows that synthetic materials can cause problems. Which statement explains the kind of problem that can develop from using synthetic materials such as plastics?
Complete question: Luisa likes to drink water from a plastic bottle. She knows the bottles were formed from synthetic polymers that were created in a chemical reaction. She also knows that synthetic materials can cause problems. Which statement explains the kind of problem that can develop from using synthetic materials such as plastics?
a) plastics have changed the way people use materials
b) plastics have made the lives of people easier
c) plastics have contributed to more pollution
d) plastics have made more work for people
Answer: The correct statement is plastics have contributed to more pollution. Option C.
Explanation:
Synthetic polymers are commonly called plastics. These are referred to as synthetic materials which can be softened by heat or pressure and then moulded into any desirable shape like the the plastic bottle Luisa drank from.
The raw materials for the manufacture of plastics are readily and cheaply available for the refinement of crude oil through series of chemical reactions. They are made by polymerization of monomers which are derived from petrochemicals.
Although they are used in producing materials used daily, it has contributed to more pollution over the years. POLLUTION is the release of chemicals or substances through man's activities, into the environment which causes harm to both man and the environment.
Plastics have contributed to more pollution because most plastics are non- biodegradable and cannot be broken down by microbial action into simple inorganic forms. Therefore, they cause severe land pollution problems since they are not easily disposable. Also is poses a major problem to the world supply of crude oil as it's limited. This is as a result of heavy dependence on crude oil which provides petrochemicals that is the bulk of the raw materials needed for making plastics.
What are the characteristic property's of metals such as malleability and high conductivity are due to ?
Answer:
Metallic Bonding
Explanation:
Conductivity occurs when electrons or ions are free moving. The conductivity in metals is due to electrons being delocalized in a sea of electrons. Metals contain metallic bonding which allows the electrons to freely move.
Malleability happens when adjacent layers of positive ions move relative to one another while being in contact with the sea of electrons from the metallic bonding.
when high pressure is applied to a gas, its
Answer: volume decreases
Which statement describes the Arrhenius interpretation of acids and bases?
It has a wider range of applications than the Bronsted-Lowry interpretation.
It has a wider range of applications than the Lewis and Bronsted-Lowry interpretations.
It is used in situations that involve bases that do not produce hydroxide ions.
It is limited to situations that involve aqueous solutions or specific compounds.
Answer: Composition is an orderly arrangement of visual structures (elements and principles) to create a mood, add meaning and direct the viewers' attention to the purpose of the artwork. Compositions are said to be 'designed' according to the specific intent of the artist.
The statement that describes the Arrhenius interpretation of acids and bases is that it is limited to situations that involve aqueous solutions or specific compounds. Therefore, option D is correct.
What is Arrhenius's interpretation?Arrhenius's interpretation defined an acid as a substance that increases the concentration of hydrogen ions (H⁺) when dissolved in water and a base as a substance that increases the concentration of hydroxide ions (OH⁻) when dissolved in water.
According to Arrhenius's interpretation, when an acid is dissolved in water, it releases H⁺ ions, which then react with water molecules to form H₃O⁺ ions, also known as hydronium ions.
Similarly, when a base is dissolved in water, it releases OH⁻ ions, which then react with water molecules to form H₂O molecules and more OH⁻ ions. Thus, option D is correct.
Learn more about Arrhenius, here:
https://brainly.com/question/15196401
#SPJ5
What are two different forms of a single gene called?
A.
traits
B.
factors
C.
alleles <<<
D.
chromosomes
Two different forms of a single gene are called 'alleles
Which layers have melting? (Choose 2) *
Lithosphere
Asthenosphere
Outer core
Inner Core
n E Which is the electron configuration for zinc? O 1s22s22p3s23p64s23d8 O 1s22s22p 3s 3p64s+3d10 01s 2s 2p 3s 23p64523d10 0 1522s 2p 3s23p64533d10
The electronic configuration is used to explain the orbitals of an atom and it helps to determine the physical and chemical properties of the elements. The electronic configuration of zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. The correct option is C.
What is electronic configuration?The distribution of electrons in the atomic orbitals is given by the electronic configuration. It is a standard notation in which all the electrons holding atomic subshells are arranged in a sequence. Each element has a unique electronic configuration.
The electronic configuration of an element can be written in two ways, in standard notation, and in condensed form. In the case of elements with larger atomic numbers, the electronic configuration becomes lengthy in standard notation. So in such cases condensed form is generally used.
In condensed form electronic configuration of zinc is [Ar] 3d¹⁰4s² and in standard form it is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰.
Thus the correct option is C.
To know more about electronic configuration, visit;
https://brainly.com/question/19589767
#SPJ7
Chemistry test!!! no fake answers please and if you can explain then do it because I need all the help I can get!
Answer:
(−ΔH°1)+12(−ΔH°2)+(ΔH°3)+(ΔH°4)
I hope this helps you out!! :)
Cool air over warm water will:
Increase in temperature
Stay the same in temperature
Decrease in temperature
Answer:
Air and Water Temperature Increases
An increase in the air temperature will cause water temperatures to increase as well. ... Lower levels of dissolved oxygen due to the inverse relationship that exists between dissolved oxygen and temperature. As the temperature of the water increases, dissolved oxygen levels decrease.
Which of the following is the correct arrangement of energy transformation in a musical christmas light
Answer:
heat energy light energy sound energy
Explanation:
pa follo