Answer:
Scientific Classification. Classification, or taxonomy, is a system of categorizing living things. There are seven divisions in the system: (1) Kingdom; (2) Phylum or Division; (3) Class; (4) Order; (5) Family; (6) Genus; (7) Species. ... Species are identified by two names (binomial nomenclature)
Explanation:
Based on the information that is given, which atom in the table has the highest mass?
The question is incomplete, the complete question is;
Atom Number of protons Number of electrons Number of neutrons
1 39 39 52
2 40 40 50
3 39 39 54
4 40 40 51
Based on the information that is given, which atom in the table has the highest mass?
a. 1
b. 2
c. 3
d. 4
Answer:
c
Explanation:
The relative atomic mass is given as; number of protons + number of neutrons. If we take the relative atomic mass of each of the options;
1) 39 +52 = 91
2) 40+50 = 90
3) 39 + 54 = 93
4) 40 + 51 = 91
Thus 3 has the highest mass as seen above, hence the answer given.
A student weighed out a sample of acid powder and found the mass to be 1.42 g. When the solution turned pink, the student read the burette accurately and found it to be 32.48 mL. If the base concentration is 0.1426 M, what is the molecular weight of the unknown acid
Answer:
306.6g/mol
Explanation:
To calculate molecular weight you need to know how many grams ou have in a determined amount of moles of substance. As you have the mass of the sample (1.42g), you need to find how many moles are, as follows:
The reaction of the acid HX with the base YOH is:
HX + YOH → H₂O + YX
1 mole of acid reacts per mole of base.
In a titration, the solution turned pink when moles base = moles acid.
Moles of base that the student added (Using the volume and molarity of the solution) are:
32.48mL = 0.03248L ₓ (0.1426 moles base / L) = 0.004632 moles of base
As the titration is in equivalence point, there are 0.004632 moles of the acid
Molecular weight (Ratio between grams of sample and its moles) is:
1.42g / 0.004632 moles =
306.6g/molhi :) , if the density of an object is the same as water , will the object float or sink?
Answer:
it will float if the object is 1g/cm^3(water 's density ) because it is less dense
An atom of an element is shown by the model. A gray circle is surrounded by 4 concentric circles. The innermost circle has gray dots at the north and south positions; the second ring has 8 equally spaced dots, aligning with the inner ring at north and south; the third ring has 14 dots, equally spaced, aligned with the other rings at north and south; the outer ring has dots at north and south. How is this model useful? It shows how electrons are distributed in the shells of an iron atom. It shows how electrons are distributed in the shells of a cobalt atom. It shows how orbitals are distributed in the shells of an iron atom. It shows how orbitals are distributed in the shells of a cobalt atom.
The correct answer is A. It shows how electrons are distributed in the shells of an iron atom.
Explanation:
In the model described, the circles represent the orbitals or shells of the atom, while the dots represent the distribution of electrons (negatively charged sub-particles). Additionally, the description shows the general electronic configuration of this atom is 2, 8, 14, 2, which means in the first orbital there are two electrons, in the second there are eight electrons, in the third, there are fourteenth electrons and in the fifth orbital there are two electrons. This electronic configuration occurs in the atoms of iron. Also, this differs from Cobalt because in cobalt the third orbital has 15 electrons. Thus, the model "shows how electrons are distributed in the shells of an iron atom".
Answer:
a. it shows how electrons are distributed in the shells of an iron atom
Explanation:
edge 2021
(:
in terms of bonds what would the molecule C6H12 be classified as
It has a double C=C bond so that means it's unsaturated, but it can also be a cyclic compound with only simple C-C bonds
Alkene
I did the test
what is a chemical bond? an attractive force between 2 molecules
Answer:
The chemical bond between 2 molecules is called an intermolecular force.
Answer:
Chemical Bond:
Attraction between two atoms results in the formation of a bond which is called a chemical bond.
Inter molecular Forces:
Attractive Force that in between 2 molecules is called Inter molecular Forces. (Inter : Between)
What evidence suggests that global climate change is causing the oceans to get warmer?
Answer:
A large point of evidence in this would be the rate of increase in how fast the polar ice caps are melting and the ocean is rising as a result. As the climate is getting warmer so are the oceans and this is causing the ice caps which are in the ocean.
Explanation:
Both Japan and the United States import many of their fossil fuels from other countries. Based on what you know about fossil fuel formation, why do you think fossil fuels are not distributed evenly across the globe?
Answer:
Fossil fuels are formed when living organisms die, and are buried under a tick layer of earth materials over a long time, usually over million s of years. Fossil fuels are formed under intense heat and pressure on the dead organisms due to the earth layer that has accumulated on the organisms over the years. The type of fossil fuels formed in a particular region depends on the type of organism that has lived in that region over the years, and the climate of the region. Regions with lush, swamp forests with many trees have enough organic material to make coal over the years. The United states however still depend on the importation of other fossil fuel that are in minimal quantity in the country. Most regions have coal, because they once had forests and animals on them but countries like the United States and some other countries have them in abundance, because these regions had a huge amount of lush, swamp forests with many trees. Japan lacks significant domestic reserves of fossil fuel, except coal, and must import substantial amounts of crude oil, natural gas, and other energy resources, because of its climate and the fact that it is an island nation.
Fossil fuels are distributed unevenly because their formation requires precise conditions that aren’t found everywhere. For fossil fuels to form, they need to be subjected to anoxic (lacking oxygen) conditions that allow for great pressure, such as those found beneath the ocean floor.nation:
Which two features of Earth's crust involve tension?
O A. Convergent boundaries
B. Reverse faults
c. Divergent boundaries
O D. Normal faults
Answer:
The correct options are;
C. Divergent plate boundary
D. Normal faults
Explanation:
Tensile stress tends to pull objects part by acting axially upon the object to pull the object on a cross section perpendicular to the objects cross-section
The most common stress in convergent plate boundaries is compression stress
The most common stress in divergent plate boundaries is tensile stress
In the presence of tensile stress, normal faults results in the raising of mountains due to their enormous forces
Therefore, the features of Earth's crust involving tension are divergent plate boundary and normal faults.
Answer:c and d
Explanation:
Smaller particles in an atom are called ____________.
Answer:
[tex]\large \boxed{\sf subatomic \ particles}[/tex]
Explanation:
The smaller particles in an atom are called subatomic particles. Subatomic particles include electrons, protons, and neutrons.
Which statement describes an electron?
Answer:
The statement that describes an electron is "It has a negative charge and is located in orbitals around the nucleus." Electrons are the smallest of the three particles that make up atoms
Explanation:
Electrons are found in shells or orbitals that surround the nucleus of an atom
Electrons are the sub-atomic particles that carry a negative charge over them. In the atom, the electrons are found in the orbitals or the shells around the nucleus. Thus, option D is correct.
What are electrons?
Electrons are the smallest sub-atomic particle that has been known to carry a negative charge and are found in the orbitals of the atom. The charge carried by an electron is 1.602 x 10⁻¹⁹ coulomb and is small than the proton and neutron.
They revolve around the nucleus in their orbits and exhibit the properties of waves and matter. The number of electrons and protons are the same in a neutral atom which makes the atomic number.
Therefore, the electrons have been known to carry a negative charge that revolves in orbit around the nucleus.
Learn more about electrons here:
https://brainly.com/question/11670765
#SPJ6
Your question is incomplete, but most probably your full question was, Which statement describes an electron?
It has a positive charge and is located in the nucleus. It has a positive charge and is located in orbitals around the nucleus. It has a negative charge and is located in the nucleus. It has a negative charge and is located in orbitals around the nucleusWhich sequence represents the relationship between temperature and volume as explained by the kinetic-molecular
theory?
higher temperature - more kinetic energy - more space between particles - higher volume
higher temperature-less kinetic energy less space between particles - higher volume
higher temperature → more kinetic energy less space between particles > lower volume
higher temperature-less kinetic energy → more space between particles lower volume
3
and wit
Answer:
A.
Explanation:
Higher temperature - more kinetic energy - more space between particles - higher volume.
A substance is said to hygroscopic if it
absorbs
(a) Carbon (IV) oxide from the atmosphere
(b) from the surrounding
(c) Moisture from the atmosphere to form
a solution
(d) Moisture from the atmosphere without
dissolving in it.
which one of the following electronic configuration represents the element that forms simple ion with a charge of-3? (a)1s^2,2s^2,2p^6,3s^2,3p^1 (b)1s^2,2s^2,2p^6,3s^2,3p^3 (c)1s^2,2s^2,2p^6,3s^2,3p^6,3d^1,4s^2 (d)1s^2,2s^2,2p^6,3s^2,3p^6
Answer:
(b)
Explanation:
The 3s^2, 3p^6 orbitals form -3 charge.
This is the element phosphorous and an example of a -3 ion is in aluminium phosphide, AlP3.
The electronic configuration which represents the element forming a simple ion having with a charge of -3 is; 1s², 2s², 2p⁶, 3s², 3p³. Option B is correct.
In this electronic configuration, the element has a total of 16 electrons. To form a simple ion with a charge of -3, the element needs to gain three electrons. This is achieved by adding three extra electrons to the existing configuration.
When the element gains three electrons, the electron configuration becomes:
1s², 2s², 2p⁶, 3s², 3p⁶
This configuration represents the stable octet configuration, where the element has a complete outer shell with eight electrons. Since the charge is -3, it means the element has gained three extra electrons to achieve a stable configuration.
Therefore, the correct electronic configuration representing the element that forms a simple ion with a charge of -3 is 1s², 2s², 2p⁶, 3s², 3p³
Hence, B. is the correct option.
To know more about electronic configuration here
https://brainly.com/question/29184975
#SPJ2
A chemist is identifying an unknown solid substance that appears purple in color. Upon close inspection with a hand lens, she notices tiny grains in the substance. Some of the grains are blue; other grains are red. Based on this information, the substance is most likely a \
The question is incomplete, the complete question is;
A chemist is identifying an unknown solid substance that appears purple in color. Upon close inspection with a hand lens, she notices tiny grains in the substance. Some of the grains are blue; other grains are red. Based on this information, the substance is most likely a
a. Compound
b. Homogeneous Mixture
c. Pure substance
d. solution
e. heterogeneous mixture
Answer:
heterogeneous mixture
Explanation:
A heterogeneous mixture simply means a mixture of two different substances. If two substances are the same, they are expected to have the same colour or appearance.
We were told in the question that the colour of the mixture appeared purple. On close examination, the sample was found to comprise of two different substances of different colours; blue and red.
If there are two substances of different colours present in the sample, it then follows that the sample is a heterogeneous mixture.
Acetic acid only partially ionizes in water. A solution contains a large quantity of acetic acid dissolved in water. How can this acid solution best be described?
Answer:
The acid solution is a concentrated solution.
Explanation:
Acetic acid is a weak acid, because it ionizes partially in water as shown below:
CH3COOH + H2O —> H3O+ + CH3COO-
A solution containing a larger quantity of acetic acid is termed concentrated solution.
This is so because a concentrated solution is a solution that contains more of the solute than the solvent.
A solute is the substance which dissolves in the solvent.
A solvent is the substance which dissolves a solute.
In this case, acetic acid is the solute and water is the solvent.
Solution is simply the combination of solute and solvent
Solution => Solute + Solvent
More solute + Less solvent => Concentrated solution
Therefore, a solution containing a higher quantity of acetic acid ( i.e the solute) in water (i.e the solvent) is called a concentrated solution.
For a first-order reaction, A → B, the rate coefficient was found to be 3.4 × 10-4 s-1 at 23 °C. After 5.0 h, the concentration of A was found to be 0.00018 mol L-1. What was the original concentration of A?
Answer:
the original concentration of A = 0.0817092 M
Explanation:
A reaction is considered to be of first order it it strictly obeys the graphical equation method.
[tex]k_1 = \dfrac{2.303}{t}log \dfrac{a}{a-x}[/tex]
where;
k = the specific rate coefficient = 3.4 × 10⁻⁴ s⁻¹
t = time = 5.0 h = 5.0 × 3600 = 18000 seconds
a = initial concentration = ???
a - x = remaining concentration of initial concentration at time t = 0.00018 mol L⁻¹
[tex]3.4 \times 10^{-4}= \dfrac{2.303}{18000}log \dfrac{a}{0.00018}[/tex]
[tex]3.4 \times 10^{-4}= 1.27944 \times 10^{-4} \times log \dfrac{a}{0.00018}[/tex]
[tex]\dfrac{3.4 \times 10^{-4}}{1.27944 \times 10^{-4}}= log \dfrac{a}{0.00018}[/tex]
[tex]2.657= log \dfrac{a}{0.00018}[/tex]
[tex]10^{2.657}= \dfrac{a}{0.00018}[/tex]
[tex]453.94 = \dfrac{a}{0.00018}[/tex]
[tex]a =453.94 \times 0.00018[/tex]
a = 0.0817092 M
Thus , the original concentration of A = 0.0817092 M
Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance?
a) melting the solid
b) heating the liquid
c) heating the gas
d) heating the solid
The question is incomplete, the complete question is;
Consider a pure crystalline solid that is heated from absolute zero to a temperature above the boiling point of the liquid. Which of the following processes produces the greatest increase in the entropy of the substance? A ) melting the solid B ) heating the gas C ) vaporizing the liquid D ) heating the solid E ) heating the liquid
Answer:
vaporizing the liquid
Explanation:
We generally define entropy in chemistry as the degree of disorderliness in a system. The entropy of gases is greater than that of liquids and the entropy of liquids is greater than that of solids. It then logically follows that the degree of entropy in gases is the greatest among all the states of matter while the entropy of solids is the least among all the states of matter since solid particles remain in their mean positions and can only vibrate or sometimes rotate. Liquid particles may translate while gaseous particles move at high velocity with negligible intermolecular forces of attraction between them.
A phase transition from liquid to gaseous state now represents the greatest change in the entropy of the system since gases posses the highest entropy among all the states of matter, hence the answer.
distinguish between deliquescence and efflorescence.
Explanation:
Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.
What's the meaning of love?
Answer: Love is when you feel like you can touch the sky when your around that person, when your at your best self or that person and when you put their needs before yours because your needs just don't matter. When you feel like you can't stop thinking about that person or you can stop smiling when you think of them. Its when you feel this warm, safe feeling when your around them. And if you really love them then my answer should be true for you.
Explanation:
because iv'e felt and have been in love before....
Answer:
Love is an intense, deep affection for another person. Love also means to feel this intense affection for someone. Love can also refer to a strong like for something or to like something a lot. Love has many other senses both as a verb and a noun
The standard reduction potential of a chromium electrode is -0.74 volts when chromium is reduced from chromium (III). The standard potential of the cell where chromium is oxidized and cerium (IV) is reduced to cerium (III) is 2.35 V. For each half reaction how many electrons are transferred
Answer:
three electrons were transferred in the process
Explanation:
The electrode potential of the cathode is
E°cathode= E°cell + E°anode
E°cathode = 2.35V + (-0.74V)
E°cathode= 1.61 V
Let us look at the reduction half equation; the oxidation half equation must be;
Oxidation half equation;
Cr(s) ----> Cr^3+(aq) + 3e
The reduction half equation must now be
Reduction half equation;
3Ce^4+(aq) + 3e ----> 3Ce^3+(aq)
This implies that three electrons were transferred in the process as shown by the balanced half cell reaction equations.
Which Group has different numbers of valence electrons?
A. Alkaline earth metals
B. Alkali metals
C. Transition metals
D. Halogens
Answer:
[tex]c. \: transition \: metals[/tex]Transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned. Therefore option C is correct.
Transition metals (Group 3-12) have varying numbers of valence electrons. This is because their valence electrons are located in more than one energy level or subshell.
The number of valence electrons for transition metals can range from 1 to 12, depending on the specific element within the group. The varying numbers of valence electrons in transition metals contribute to their diverse chemical properties and ability to form multiple oxidation states.
Therefore, transition metals (Group C) have different numbers of valence electrons compared to the other groups mentioned.
Know more about transition metals:
https://brainly.com/question/29828769
#SPJ2
An ionic bond is the attraction between _____.
Answer:
oppositely charged ions in a chemical compound
Explanation:
Answer:
Between ions
Explanation:
The solubility product constant at 25°C for AgI(s) in water has the value 8.3 × 10–17. Calculate ∆Grxn at 25°C for the process AgI(s) <--> Ag+(aq) + I– (aq) where [Ag+] = 9.1 × 10–9 and [I–] = 9.1 × 10–9. –91.7 kJ/mol +91.7 kJ/mol 0.0 kJ/mol –4.4 kJ/mol +4.4 kJ/mol
Answer:
+91.7 KJmol-1
Explanation:
Recall that ∆G= -RTlnK
Since ∆G in this case is ∆Grxn and K is the Ksp
Note that the Ksp is the solubility product (as shown by the reaction equation)
∆Grxn is the change in free energy for the reaction, in this case the ionization of the silver iodide into silver and iodide ions.
R= 8.314JK-1 and T =25°C +273 = 298 K (the centigrade temperature must be appropriately converted to its corresponding absolute absolute before proceeding with the calculation)
Hence we can substitute values accordingly;
∆Grxn = -(8.314 × 298 × ln 8.3×10^-17)
∆Grxn = +91.7 KJmol-1
What are chemical changes of matter?
Answer:
Chemical Changes are also called Chemical Reactions. Chemical reactions involve combining different substances. The chemical reaction produces a new substance with new and different physical and chemical properties. Matter is never destroyed or created in chemical reactions.
Explanation:
Describe how red shifts were used by cosmologists to determine that the universe was expanding. How
is this evidence for the big bang theory?
Explanation:
astronomers have discover that in general the future of a Galaxy is, the more redshift light is this mean that the further away the Galaxy are the faster they are moving this is similar to explosion where the bits moving fastest travel for furthest on the explosion redshift data provides evidence that the universe including space itself is expanding .
What's the valency of sulphur for Na2SO3
Explanation:
What are the two oxidation states of sulphur in sodium thiosulphate ? In thiosulphate, two sulphurs have oxidation state of -2 and +6. (as per suggestions). Sulphur bonded to three oxygen is considered to have +6 (Sulphur A) and other sulphur has -2 (Sulphur B).
The reaction below was carried out in an acidic solution. Upper I minus, plus upper I upper O minus subscript 3 right arrow upper I subscript 2. Which statement is true about this equation?
Answer:
It has been balanced by using the half-reaction method.
Explanation:
I- and IO3- gives I2
We divide the reaction into two half-reactions
(2 I- >> I2 + 2e-) x5 ( oxidation : I goes from -1 to 0 )
2 IO3- + 12H+ + 10e- >> I2 + 6H2O ( reduction : I goes from +5 to 0 )
10 I- >> 5I2 + 10e-
2IO3- + 12H+ + 10e- >> I2 + 6H2O
-----------------------------------------------------
10 I- + 2IO3- + 12H+ >> 6I2 + 6H2O
To get the smallest numbers we divide by 2 :
5 I- + IO3- + 6H+ >> 3I2 + 3H2O
It has been balanced by using the half-reaction method. Hence, option B is correct.
What is a redox reaction?A chemical reaction that takes place between an oxidizing substance and a reducing substance.
We divide the reaction into two half-reactions
[tex](2 I^-[/tex] → [tex]I_2 + 2e^-)[/tex] x 5 ( oxidation : I goes from -1 to 0 )
[tex]2 IO^{3-} + 12H^+ + 10e^-[/tex] → [tex]I_2 + 6H_2O[/tex] ( reduction : I goes from +5 to 0 )
[tex]10 I^-[/tex] →[tex]5I_2 + 10e^-[/tex]
[tex]2IO^{3-} + 12H^+ + 10e^-[/tex] → [tex]I_2 + 6H_2O[/tex]
[tex]10 I^- + 2IO^{3-} + 12H^{+}[/tex]→ [tex]6I_2 + 6H_2O[/tex]
To get the smallest numbers we divide by 2 :
[tex]5 I^- + IO^{3-} + 6H^+[/tex] → [tex]3I_2 + 3H_2O[/tex]
Hence, option B is correct.
Learn more about the redox reaction here:
https://brainly.com/question/14881952
#SPJ2
Name the hydro carbon. please guys, its really urgent.
Answer:
The given hydrocarbon is Glycerol
why NH4 is not a molecular ion
Answer:
Is
Explanation:
Ammonium (NH4+) is a poly-atomic ion. ... NH4+ is not the formula of a neutral molecule, neutral ammonia is NH3. to make the ammonium ion, you add a proton (H+). Thus, Ammonium is NOT a molecular ion. You can create a molecular ion like NH3- by electron bombardment to give it a negative charge.
Hope this helps......