hydrogen chloride, hydrogen nitrate (v), sodium chloride, sodium hydroxide. Name a substance known as common salt​

[tex]1) \: decomposition[/tex]

[tex]2) \:hydrocarbon \: combustion[/tex]

[tex]3) \: formation[/tex]

[tex]4) \: double - replacement[/tex]

[tex]5 \: double - replacement[/tex]

[tex]6) \: formation[/tex]

[tex]7)double \: - replacement[/tex]

[tex]8) \: double - replacement[/tex]

Answer:

C Endothermic

Explanation:

a. p. e. x

The presence of a non-volatile salt will decrease the freezing point of water and this process is called depression in freezing point. Thus option D is correct.

Freezing point of a substance is the temperature at which it converts from its liquid state to solid state where, both the states are in equilibrium. Freezing point of water is zero degree celsius.

The freezing point of a solvent depends on some parameters such as the bond type, molecular weight, temperature, pressure etc.

When a non-volatile solute is added to the solvent its freezing point decreases from its initial value. Because presence of non-volatile salts will affect the intermolecular attraction and thereby the energy that must be applied to freeze the compound.

Therefore, the freezing point of water decreases, when sodium chloride is added into it. Thus option D is correct.

To find more about freezing point, refer the link below;

https://brainly.com/question/2292439

#SPJ6

Answer:

A. Mixture

Explanation:

Our air has a group of gases. For example, you said nitrogen & oxygen, Which is significantly a mixture.

Answer: hydrogen gas

Explanation: When magnesium interacts with water, it will form a hydrogen gas that ignites violently due to the excessive heat and oxygen supply.

Answer:

2. Full

Explanation:

A lunar eclipse occurs at a full moon when Earth is directly between the moon and the sun. During a lunar eclipse, Earth blocks sunlight from reaching the moon.

Hope this helps!!

Answer:

0.0123 mol

Explanation:

Step 1: Convert 34.0 °C to Kelvin

We will use the following expression.

K = °C + 273.15 = 34.0 + 273.15 = 307.2 K

Step 2: Convert 148 cm³ to L

We will use the conversion factors:

[tex]148cm^{3} \times \frac{1mL}{1cm^{3}} \times \frac{1L}{1000mL} = 0.148L[/tex]

Step 3: Convert 212 kPa to atm

We will use the conversion factor 1 atm = 101.325 kPa.

212 kPa × 1 atm / 101.325 kPa = 2.09 atm

Step 4: Calculate the moles of nitrogen gas

We will use the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 2.09 atm × 0.148 L / (0.0821 atm.L/mol.K) × 307.2 K = 0.0123 mol

Answer:

B

Explanation:

took the test

D. It should have a half-life much longer than the age of the object being dated. When using isotopes for dating purposes, it is important to choose an isotope with a half-life that is significantly longer than the age of the object being dated.

The half-life is the time it takes for half of the radioactive isotopes in a sample to decay into stable isotopes. By measuring the ratio of the original radioactive isotope to the decay product, scientists can determine the age of the object.

The majority of the radioactive material would have decayed if the isotope had a half-life substantially less than the age of the artefact, making it challenging to precisely establish the age.

On the other hand, the dating procedure would become more challenging and unpredictable if the isotope in the object being dated (option C) has a half-life that varies over time.

As a result, an isotope with a long half-life offers a stronger basis for precise dating since it enables sufficient radioactive decay to take place, producing quantifiable and trustworthy data.

Learn more about isotope at:

https://brainly.com/question/11680817

#SPJ2

Answer:

Ne 20: 10

and

Ne 22: 12

Explanation:

Ne-20:

N = A - Z = 20 - 10 = 10 neutrons

Ne-22:

N = A - Z = 22 - 10 = 12 neutrons

N: number of neutrons

A: mass number

Z: atomic number

Answer:

I think it is enzymes

Explanation:

Answer:

2-pentanone.

Explanation:

Hello there!

In this case, for the given compound and, in agreement with the octet rule, it is possible to realize that the CO is actually C=O as shown below:

CH3  -  C  -  CH2  -  CH2  -  CH3

            ||

           O

Thus, since the C=O stands for the carbonyl group within the parent chain, we infer this is a ketone and more specifically 2-pentanone as it has five carbon atoms.

Regards!

Answer:

B. It undergoes a physical change.

Explanation:

Hello there!

In this case, since we know that chemical changes lead to the formation of new atoms and/or compounds due to the bonds rearrangement of the initial substances and the physical changes occur without changing the composition of the initial substances, we can infer that, since melting is a process that changes the phase of matter from solid to liquid without changing the identity of the initial substance, the answer to this question would be B. It undergoes a physical change. because the other options describe chemical changes.

Best regards!

Answer:

B. It undergoes a physical change.

Explanation:

At room temperature, the iron atoms are in an unusual loosely packed open arrangement; as iron is heated past 912 degrees Celsius, the atoms become more closely packed before loosening again at 1,394 degrees Celsius and ultimately melting at 1,538 degrees Celsius.

Answer:

Animals are used in scientific research to help us understand our own bodies and how they work. This is necessary to develop new medicines. Animals are also used to safety test potential medicines before they are tested in people and to check the safety of other chemicals.

Explanation:

Answer:

A. As pressure decreases, the concentration of gas molecules in the solution increases.

D. The solubility of nitrogen gas at 2.00 atm is twice the solubility of the gas at 1.00 atm.

F. More gas molecules are soluble as pressure is increased.

The solubility is 188.3 mg of N2 gas/100 g water.

Explanation:

As the pressure on the gas decreases, the volume of gas molecules in the solution increases due to having distance from each other. The solubility of nitrogen gas at 2.00 atm is twice the solubility of the gas at 1.00 atm because there is more pressure on the gas molecules so due to more compression, the gas becomes more soluble. More gas molecules are soluble as pressure is increased. The solubility is 188.3 mg of N2 gas/100 g water if the atmospheric pressure is increases from 3.08 atm to 8.00 atm. This value is calculated with the help of formula i.e. P2/P1 = S2/S1.

Answer:

C

Explanation:

increasing the temperature will favour the forward reaction therefore the reaction system will try to counteract that by producing more heat and NO2 therefore increases the amount of products produced

increasing the pressure will favour the forward reaction as it has more moles of substance therefore if the forward reaction is favored, more product will be produced

Answer:

C.) lV and V

Explanation:

I got it correct on founders edtell

Answer:

Start your streak by answering any question. You'll get bonus points from day 2.

Answer:

fishery

An area with a large population of valuable ocean organisms is called a fishery. If it was correct mark me as brainiest

Explanation:

2x²=8

x²=8/2

x=√4

x=2

hope it helps.

Answer:

[tex]\huge \fbox \pink {A}\huge \fbox \green {n}\huge \fbox \blue {s}\huge \fbox \red {w}\huge \fbox \purple {e}\huge \fbox \orange {r}[/tex]

[tex] {2x}^{2} = 8 \\ {x}^{2} = \frac{8}{2} \\ {x}^{2} = 4 \\ x = \sqrt{4} \\ x = 2[/tex]

ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ

[tex] \huge\purple{ \mid{ \underline{ \overline{ \tt ꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐ }} \mid}}[/tex]

Answer:

If the percentage abundance of Cl-35 is x , then x×35+(100−x)37100=35.5

75% of Cl-35 and 25% of Cl-37.I hope this helped!

Explanation:

Well arranged question is;

Select the statement that is FALSE about this experiment. Group of answer choices;

A) Changing metal solution will affect the redox potential.

B) To ensure consistent data, collect the redox potential values at least three times.

C) Changing temperature will affect the redox potential.

D) To ensure stable reading, insert the conductivity meter in the solution for at least 60 seconds.

E) Changing concentration will affect the redox potential.

Answer:

D) To ensure stable reading, insert the conductivity meter in the solution for at least 60 seconds.

Explanation:

Usually, redox potential is the measure of the ability of chemical elements to gain/lose electrons from/to an electrode respectively and after which they undergo reduction or oxidation respectively.

From online sources on experiments to determine redox potential, and taking into account the nernst equation which is; E_cell = E_0 – (RT/nF)•ln Q

Where;

E_cell is cell potential

E_0 is potential of the cell under standard conditions

R is universal gas constant

T is temperature

n is the number of electrons that are transferred in the redox reaction

F is Faraday's constant

Q is reaction quotient

Now, with all that in mind and looking at the options, the one that is false is option D.

Molar concentration is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.

Answer:

Wind energy

Explanation:

An ideal source of energy needs to be reliable, cost effective, safe and must lead to almost zero adverse environmental impact.

Wind energy is energy obtained from air moving at high velocity. This energy is harvested using windmills which convert mechanical energy to electrical energy.

Wind is inexpensive because it occurs naturally. However, a large expanse of land is required in order to mount sufficient number of windmills that will generate enough electrical energy for practical purposes.

This method of electricity generation is safe and does not lead to any environmental hazard unlike the burning of fossil fuels, use of nuclear energy or loss of habitat due to hydroelectric power generation.

Answer:

34^8

Explanation:

Answer:

Sea water salinity is expressed as a ratio of salt (in grams) to liter of water. In sea water there is typically close to 35 grams of dissolved salts in each liter. It is written as 35‰. The normal range of ocean salinity ranges between 33-37 grams per liter (33‰ - 37‰).

Answer:

[tex]V_2=27.87L[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to solve this problem by using the Charles' law a directly proportional relationship to understand the volume-temperature behavior:

[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]

Thus, we solve for the final volume, V2, and make sure the temperature are in Kelvin as shown below:

[tex]V_2 =\frac{V_1T_2}{T_1} \\\\V_2=\frac{26.42L(92+273.15)K}{(73+273.15)K} \\\\V_2=27.87L[/tex]

Regards!

Answer:

2 mL of Solution A must be added to Solution B to give a buffer that is equimolar.

Explanation:

 Given the data in the question;

First we determine the number of sodium acetate;  

⇒ molarity × volume ( L )

⇒ 0.16 × 2.0 mL

⇒ 0.16 × 0.002 L

⇒ 0.00032

Now, Molarity of sodium acetate = moles / Volume(L)

⇒ ( 0.00032 / 50 ) × 1000

⇒ 0.0064

Since number of moles of acetic acid that should be added tp make equimolar solution is 0.00032

and Molarity of acetic acid is 0.16 molL⁻¹

Let X represent the volume that should be added.

so;

Molarity = Moles / Volume (L)

we substitute

0.16 = (0.00032  / X) × 1000

0.16 = 32 / X

X = 0.32 / 0.16

X = 2 mL

Therefore, 2 mL of Solution A must be added to Solution B to give a buffer that is equimolar.

Answer:

Label each solution as acidic, basic, or neutral based only on the stated pH.

milk of magnesia, pH = 10.5

pure water, pH = 7

wine, pH = 3.0

Solution

With a pH greater than 7, milk of magnesia is basic. (Milk of magnesia is largely Mg(OH)2.)

Pure water, with a pH of 7, is neutral.

With a pH of less than 7, wine is acidic.