I NEED HELP ON THIS ASAP! PLEASE IT'S DUE TODAY!!

The IUPAC name for the compound shown of a 6 carbon ring has two alcohol substituents on carbons 1 and 3 is cyclohexane-1,3-diol.

The compound shown is called cyclohexane-1,3-diol.

It has a place with the group of cyclic alcohols, which are compounds containing both a hydroxyl (- Goodness) bunch and a cyclic construction in their substance structure.

Cyclohexane-1,3-diol is named by the IUPAC classification framework, which relegates an exceptional and precise name to a given compound in view of its sub-atomic construction.

For this situation, the prefix "cyclo" shows the presence of a cycloalkane ring, explicitly a six-membered ring (cyclohexane). The addition "- diol" demonstrates that there are two hydroxyl (- Gracious) bunches connected to the ring, explicitly at positions 1 and 3.

Accordingly, cyclohexane-1,3-diol is the right IUPAC name for this compound.

To learn more about IUPAC name, refer:

https://brainly.com/question/29926700

#SPJ4

Answer:

the answer is D. the molecules of a gas are small compared to the distance between them

Explanation:

The postulates of Kinetic-Molecular Theory are as follows:

The molecules of a gas move rapidly, constantly, and in straight lines.

The average kinetic energy of the molecules of a gas is directly proportional to the Kelvin temperature.

A gas exerts pressure because the gas molecules repel each other.

The molecules of a gas are small compared to the distance between them1.

Therefore, “the molecules of a gas are small compared to the distance between them” is not a postulate of Kinetic-Molecular Theory

Answer:

A

Explanation:

M.G has no cure. it's an autoimmune disease that affects communication between nervous and the muscles.

Molarity (M) is a unit of concentration that expresses the amount of solute dissolved in a solution. It is defined as the number of moles of solute present per liter of solution (mol/L).

Molarity is commonly used in chemistry to express the concentration of a solute in a solution and is typically represented as moles of solute per liter of solution (mol/L or mol L^-1). Molarity is used to describe the concentration of a solution and is important in various calculations involving chemical reactions and solutions.

To calculate molarity, follow these steps:
1. Determine the number of moles of solute in the solution.
2. Measure the volume of the solution in liters.
3. Divide the moles of solute by the volume of the solution in liters.

Molarity = moles of solute/liters of solution

To know more about Molarity:

https://brainly.com/question/22997914

#SPJ11

Molarity is a unit of concentration in chemistry. It is defined as the number of moles of solute per liter of solution. In other words, it measures the amount of substance (in moles) dissolved in a given volume of solution (in liters). the left column contains "molarity," "moles," and "liters," and the sentences.

To match the items in the left column to the appropriate blanks in the sentences on the right, we can use the following:
- Molarity: a unit of concentration in chemistry
- Number of moles: the amount of substance dissolved in a solution
- Liter of solution: the volume in which the substance is dissolved
- Solvent: the substance in which the solute is dissolved
- Solute: the substance that is dissolved in a solvent to make a solution

So the sentences could be:
- Molarity is a unit of concentration in chemistry that measures the amount of substance (in moles) dissolved in a given volume of solution (in liters).
- The number of moles of solute per liter of solution is known as molarity.
- A liter of solution is the volume in which the solute is dissolved to make a solution with a certain molarity.
- A solvent is a substance in which a solute is dissolved to make a solution of a certain molarity.
- A solute is a substance that is dissolved in a solvent to make a solution of a certain molarity.
Hello! Molarity is a measure of the concentration of a solute in a solution, expressed as moles of solute per liter of solution. To match items in the left column to the appropriate blanks in the sentences on the right, follow these steps:

learn more about molarity

https://brainly.com/question/17138838

#SPJ11

If you had 6 M acetic acid rather than glacial acetic acid in the first step of the Friedel-Crafts reaction, less product would likely have formed.

The Friedel-Crafts reaction requires a strong Lewis acid catalyst, such as aluminum chloride (AlCl3), which reacts with the acylating agent to form a reactive electrophile. In this case, the acylating agent is acetic anhydride, which reacts with AlCl3 to form an acylium ion that can then react with the aromatic ring. However, the reaction is sensitive to the amount of water present, and the presence of excess water (which would be more likely in the case of dilute acetic acid) can lead to hydrolysis of the acylium ion and a decrease in the yield of the desired product.

Learn more about Friedel-Crafts reaction

https://brainly.com/question/31107543

#SPJ4

When an ionic compound was dissolved in 250 mL of water and the temperature of the solution increased from 25°C to 42°C, the value of ΔH is lesser than zero and has a small magnitude and the value of ΔG is also lesser than zero.

When ionic compounds dissolve in water, the ions in the solid separate and disperse uniformly throughout the solution because water molecules surround and solvate the ions, reducing the strong electrostatic forces between them. This process represents a physical change known as dissociation.

In this there is increase in temperature which means that heat energy is released which makes the dissolution exothermic and thus it has ΔH negative. Since the reaction is feasible, the ΔG will be less than zero.

Learn more about Ionic compounds, here:

https://brainly.com/question/3222171

#SPJ1

True. The standard conditions for measuring thermodynamic properties such as enthalpy, entropy, and Gibbs free energy are well-defined and standardized.

These conditions are used to compare and evaluate the relative stability and reactivity of different chemical species. The standard conditions for measuring these properties include a concentration of 1.0 m for soluble aqueous species, pure solids and liquids, and

a partial pressure of 1 atm for gaseous species. This means that the molar concentration of soluble aqueous species is set at 1.0 mol/L, and the pressure of gaseous species is set at 1 atm.

Pure solids and liquids are considered to have an activity of 1, which means that they do not affect the thermodynamic properties.

These conditions are used to determine the standard thermodynamic properties of chemical reactions, which are used to predict the direction and extent of chemical reactions.

To learn more about : standard

https://brainly.com/question/29136034

#SPJ11

The concentration of stock solution is 15.2 M if You have 450.80 mL of 0.86 M dilute solution that was prepared with 25.50 of stock solution.

For more information on stock solution kindly visit to

https://brainly.com/question/25256765

#SPJ1

A sample of [tex]Br_2[/tex](g) takes 14.0 min to diffuse out through a membrane. It would take 7 min for the same number of moles of Ar(g) to effuse through the same membrane.

According to Graham's Law of Diffusion, it is known that the rate of diffusion of a gas is proportional to the reciprocal of the square root of the molar mass of the gas. The rate of diffusion is recorded under the same pressure and temperature conditions.

It can be written as [tex]\frac{r_1}{r_2}[/tex] ∝ [tex]\sqrt\frac{m_2}{m_1}[/tex]

where [tex]r_1[/tex] is the rate of diffusion of one of the gas

[tex]r_2[/tex]  is the rate of diffusion of the second gas

[tex]r_1[/tex] is the molar mass of one of the gas

[tex]m_2[/tex]  is the molar mass of the second gas

According to the question,

[tex]\frac{14}{r_2}=\sqrt\frac{160}{40}\\\frac{14}{r_2}=\sqrt\frac{4}{1} \\\\r_2 = 14\sqrt{\frac{1}{4} } = 7[/tex]

Therefore the time taken for the diffusion of Ar (g) is 7 min

Learn more about Diffusion:

https://brainly.com/question/29064792

#SPJ4

It would take approximately 7.0 minutes for the same number of moles of Ar(g) to effuse through the same membrane.

Using Graham's law of effusion, we can compare the rates of effusion for Br2(g) and Ar(g). The formula for Graham's law is:

Rate₁ / Rate₂ = √(M₂ / M₁)

Here, Rate₁ and Rate₂ are the effusion rates of the two gases, and M₁ and M₂ are their molar masses. In this case, Br2(g) is gas 1 and Ar(g) is gas 2. The molar mass of Br2 is 159.8 g/mol, and the molar mass of Ar is 39.95 g/mol.

Since we know the time it takes for Br2 to effuse, we can write:

Time₁ / Time₂ = Rate₂ / Rate₁ = √(M₁ / M₂)

Plugging in the given time and molar masses:

14.0 min / Time₂ = √(159.8 g/mol / 39.95 g/mol)

Solving for Time₂:

Time₂ = 14.0 min * √(39.95 g/mol / 159.8 g/mol) ≈ 7.0 min

Learn more about Graham's law of effusion here: brainly.com/question/22359712

#SPJ11

The best describes her speed and velocity is; Her speed is 4. 4 m/s, and her velocity will be 0 m/s. Option A is correct.

Lila's speed will be calculated by dividing the total distance she covered by  time it took her to complete the race;

Speed = Total distance/Time

In this case, Lila will covered 4 laps, which is a total distance of 4 x 400 = 1600 meters. She completed the race in 6 minutes, which is 6 x 60 = 360 seconds. Therefore, her speed is;

Speed = 1600 meters / 360 seconds

Speed = 4.44 m/s (rounded to two decimal places)

Velocity, on the other hand, is a vector quantity that takes into account both speed and direction. Since Lila ran four laps around a circular track, she ended up at the same position where she started. However, her displacement (change in position) is zero, which means her velocity is also zero.

Hence, A. is the correct option.

To know more about velocity here

https://brainly.com/question/17127206

#SPJ4

--The given question is incomplete, the complete question is

"Lila is a track and field athlete. She must complete four laps around a circular track. The track itself measures 400 meters from start to finish and the race took her 6 minutes to complete. Which best describes her speed and velocity? A) Her speed is 4. 4 m/s, and her velocity is 0 m/s. B) Her speed is 1. 1 m/s, and her velocity is 0 m/s. C) Her speed is 0 m/s, and her velocity is 2400 m/s. D) Her speed is 4. 4 m/s, and her velocity is 4. 4 m/s"--

In changing the size of the zinc electrode would not impact the voltage of the cell.

If the size of the zinc electrode were doubled, the cell voltage would stay the same. This is because the voltage of a cell is dependent on the difference in potential between the two electrodes, not their size.

Doubling the size of the zinc electrode would not change the potential difference between the zinc and copper electrodes, therefore the cell voltage would remain constant.

The only factor that would affect the cell voltage would be a change in the concentration or temperature of the electrolyte solution or a change in the material or surface area of the copper electrode.

To learn more about : electrode

https://brainly.com/question/18251415

#SPJ11

1) 5.1167 x 10²⁴atoms of chlorine. 2) 248.00 g. 3) 4.8825 x 10⁷ moles of helium. 4) 2.7757 x 10²⁴ atoms of sulfur.  5) Molar mass of Co (cobalt) is 58.93 g/mol.  6) Formula mass =  310.18 g/mol.

Sum of the atomic masses of all the atoms in chemical formula is called formula mass

1.)  Number of atoms = 8.500 moles x 6.022 x 10²³ atoms/mole = 5.1167 x 10²⁴ atoms of chlorine.

2.) Molar mass of oxygen is 16.00 g/mol. Therefore:

Mass of 15.50 moles of oxygen = 15.50 moles x 16.00 g/mol = 248.00 g.

3.) Molar mass of helium is 4.00 g/mol. Therefore, the number of moles of helium in 1.953 x 10⁸ g is:

Number of moles = 1.953 x 10⁸ g / 4.00 g/mol = 4.8825 x 10⁷ moles of helium.

4.) Molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of sulfur in 147.82 g is:

Number of moles = 147.82 g / 32.06 g/mol = 4.6084 moles of sulfur.

To find the number of atoms, we can use Avogadro's number again:

Number of atoms = 4.6084 moles x 6.022 x 10²³ atoms/mole = 2.7757 x 10²⁴ atoms of sulfur.

5.) Molar mass of Co (cobalt) is 58.93 g/mol.

6.) Ca₃(PO₄)₂ contains 3 calcium atoms, 2 phosphorus atoms, and 8 oxygen atoms.

Atomic masses of these elements are:

Calcium (Ca) = 40.08 g/mol

Phosphorus (P) = 30.97 g/mol

Oxygen (O) = 16.00 g/mol

Therefore, formula mass of Ca₃(PO₄)₂ is:

Formula mass = (3 x 40.08 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol)

= 120.24 g/mol + 61.94 g/mol + 128.00 g/mol

= 310.18 g/mol.

To know more about formula mass, refer

https://brainly.com/question/21334167

#SPJ1

We separate porridge from cooked rice using a strainer or a sieve.

Porridge and cooked rice are both similar in texture and appearance, making it difficult to separate them. One way to do it is to use a strainer or a colander with small holes. Pour the mixture of porridge and rice into the strainer or colander and let the liquid portion drain out. You can also use a cheesecloth or a muslin cloth to squeeze out the liquid while retaining the rice grains.

Another method is to use a spoon to scoop out the rice from the top, leaving the porridge at the bottom. However, this method may not be as effective as the others. Regardless of the method you choose, it is important to be gentle and patient to avoid breaking the rice grains and mixing them with the porridge.

To know more about porridge, here

https://brainly.com/question/30859396

#SPJ4

The fraction of the cofactors in the NAD form would be:

[NADH]/([NADH] + [NAD+]) = 1/237.8 = 0.0042 or approximately 0.4%.

To determine the fraction of a population of cofactors that would be in the NAD form at a given pH and potential, the Nernst equation can be used. For the reduction reaction of NAD+ to NADH, the standard reduction potential (E°) is -0.32 V. At a pH of 7.0, the Nernst equation can be written as:

E = E° - (RT/nF)ln([NADH]/[NAD+]

Where:

E = potential of the half-reaction

R = gas constant

T = temperature in Kelvin

n = number of electrons transferred

F = Faraday constant

[NADH]/[NAD+] = ratio of reduced to oxidized forms of the cofactor

Substituting the given values, we get:

-300 mV = -0.32 V - (RT/2F)ln([NADH]/[NAD+])

Solving for ln([NADH]/[NAD+]), we get:

ln([NADH]/[NAD+]) = -(2F/RT)(-300 mV + 0.32 V)

ln([NADH]/[NAD+]) = 5.47

Taking the exponential of both sides, we get:

[[tex]NADH]/[NAD+] = e^(5.47) = 236.8[/tex]

Therefore, the fraction of the cofactors in the NAD form would be:

[NADH]/([NADH] + [NAD+]) = 1/237.8 = 0.0042 or approximately 0.4%.

Learn more about the cofactors

https://brainly.com/question/28207649

#SPJ4

Changes in the chemical environment of a basic buffer solution can cause shifts in the equilibrium between ammonia, hydroxide ion, and ammonium ion, leading to changes in their respective concentrations.

When a basic buffer solution of equal concentrations of ammonia and ammonium nitrate is subjected to changes in its chemical environment, the concentrations of ammonia, hydroxide ion, and ammonium ion will be affected as follows:

1) Addition of an acid: The acid reacts with the hydroxide ion present in the buffer solution to form water. This decreases the concentration of hydroxide ion and shifts the equilibrium towards the formation of more ammonia and ammonium ion, thus increasing their concentrations.

2)Addition of a base: The base reacts with the ammonium ion present in the buffer solution to form ammonia and water. This decreases the concentration of ammonium ion and shifts the equilibrium towards the formation of more hydroxide ion, thus increasing its concentration.

3)Dilution: Diluting the buffer solution with water decreases the concentrations of both ammonia and ammonium ion, but does not affect the concentration of hydroxide ion.

4)Addition of ammonium chloride: The ammonium chloride dissociates into ammonium ion and chloride ion in the buffer solution. The increase in ammonium ion concentration causes the equilibrium to shift towards the formation of more ammonia and hydroxide ion, thus increasing their concentrations.

For such more questions on Ammonium nitrate:

https://brainly.com/question/28760836

#SPJ11

Explanation:

Moles in the 20 ml  

   .020 L   *   1.5  moles/L = .03 moles

now in 50 ml   (which is  .05 liters )

      .03 moles / .05 L   = .6 m

When building a bridge in South America, it is important to consider the climate and terrain of the region. The company should research the area and use the most appropriate materials for the task.

Materials are substances or resources that are used to create or make something else. Examples of materials include plastics, metals, fabrics, and paper. Materials are used in the manufacturing of products, such as food, clothing, furniture, and electronics. Materials can also be found in nature, including wood, stone, and minerals. They are also used in the construction of buildings, bridges, and other structures.

For example, they should use steel or reinforced concrete to build the bridge, as these materials are highly durable in wet, humid climates. Additionally, they should make sure to use corrosion-resistant fasteners and coatings to prevent rusting. The company should also consider the seismic activity in the region when designing the bridge, as earthquakes can cause significant structural damage. They should make sure to use seismic-resistant designs and materials, such as flexible joints, to help reduce the risk of damage. Lastly, the company should include guardrails and other safety features on the bridge, as it will be traversed by both pedestrians and vehicles.

To learn more about materials

https://brainly.com/question/16185625

#SPJ1

Glyphosate was initially thought to have no effect on human health because it primarily targets enzymes found only in plants and bacteria, not humans.

Additionally, the compound was believed to have a low toxicity level and was considered to be safe when used according to the labeled instructions.

However, recent scientific studies have suggested potential health risks associated with glyphosate exposure, including links to cancer and other health issues.

These studies have prompted further investigation and controversy surrounding the safety of glyphosate in herbicides.

To know more about Glyphosate, refer here:

https://brainly.com/question/30628930#

#SPJ11

When lactic acid accumulates, the compensatory mechanism initially triggered to maintain acid-base balance is the respiratory system. It increases the rate and depth of breathing to eliminate more carbon dioxide, which helps reduce acidity and restore pH balance in the body.

As lactic acid accumulates, the compensatory mechanism that is initially triggered to maintain acid-base balance is increased ventilation or hyperventilation. This is because the increased ventilation leads to a decrease in carbon dioxide (CO2) levels in the blood, which helps to offset the acidic effects of lactic acid accumulation. This is a temporary compensatory mechanism, however, as the body will eventually need to eliminate the excess lactic acid through other means such as metabolism and excretion.

Learn more about lactic acid here: brainly.com/question/24976306

#SPJ11

The {H⁺} of the solution is 2.238 × 10^(-12) M.

pH is a measure of the acidity or basicity of an aqueous solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions ([H+]) in moles per liter. The pH scale ranges from 0 to 14, where a pH of 7 is neutral. Solutions with a pH less than 7 are acidic, while solutions with a pH greater than 7 are basic (also called alkaline).

The pH of a solution is defined as:

pH = -log[H⁺]

Rearranging the equation, we get:

[H⁺] = 10^(-pH)

Substituting the given value of pH, we get:

[H⁺] = 10^(-11.55)

[H⁺] = 2.238 × 10^(-12) M

To know more about pH, here

brainly.com/question/491373

#SPJ4

The amount of copper obtained by the reaction depends on the amount of copper chloride reacted and the limiting reagent in the reaction.

Without information on the amounts of reactants used, it is not possible to calculate the amount of copper obtained by the reaction or compare it to the expected amount. However, if the reaction was carried out under controlled conditions and all reactants were used in the stoichiometric ratio, the amount of copper obtained should be the expected amount calculated based on the balanced chemical equation.

In order to calculate the expected amount of copper obtained, the amount of copper chloride reacted should be known, and the limiting reagent should be identified. The amount of copper obtained will be determined by the limiting reagent.

To learn more about amount of copper, here

https://brainly.com/question/29145260

#SPJ4

The complete question is:

Calculate the amount of copper obtained by the reaction. Was it the amount you expected? Explain. ​

3CuCl2(aq) +2 Al (s) ----> 2AlCl3(aq) + 3Cu(s)

Answer:

data given

mass of NaCl 4.56

dissolved volume 20ml(0.02l)

density of solution 1.03g/ml

Required molality

Explanation:

molarity=m/mr×v

where

m is mass

mr molar mass

v is volume

now,

molarity=4.56/58.5×0.02

molarity =3.9

: .molarity is 3.9mol/dm^3

According to molal concentration, the concentration (in molality) of an aqueous solution of NaCl is 0.0047 mole/kg.

Molal concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molal concentration is moles/kg.

The molal concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

In terms of moles, it's formula is given as molal concentration= number of moles /mass of solvent in kg.

Substitution in formula gives the answer but first mass of solution is determined which  is density×volume= 1.03×20=20.6 g , mass of solvent= 20.6-4.56=16.05, thus molal concentration=4.56/58.5×1/16.05=0.0047 moles/kg.

Learn more about molal concentration,here:

https://brainly.com/question/4580605

#SPJ2

The correct answer to your question is option 2, which states that a dissolution process is exothermic if the amount of energy released in bringing about solute-solute interactions is greater than the sum of the amounts of energy absorbed in overcoming crystal lattice and solvent-solvent interactions.

To understand this concept better, we need to understand what happens during the dissolution process. When a solute dissolves in a solvent, the solute particles break away from their crystal lattice structure and mix with the solvent particles. This process involves overcoming the attractive forces between the solute particles (solute-solute interactions) and the attractive forces between the solvent particles (solvent-solvent interactions). At the same time, energy is released when the solute particles interact with the solvent particles (solvent-solute interactions).
In an exothermic dissolution process, the energy released due to solvent-solute interactions is greater than the energy required to overcome the crystal lattice and solvent-solvent interactions. This means that more energy is released than absorbed, resulting in a net release of heat. This is because the attractive forces between the solute and solvent particles are stronger than the forces holding the solute particles in their crystal lattice structure.
Overall, the exothermic nature of a dissolution process depends on the balance between the energy released and absorbed during the process. By understanding the interactions between solute and solvent particles, we can predict whether a dissolution process will be exothermic or endothermic.

For more information on crystal lattice see:

https://brainly.com/question/10281663

#SPJ11

You would need to pipette 2.6 mL of stock solution to make a 1:5 dilution with a final volume of 13 mL.

To calculate this, first note that a 1:5 dilution means that for every 1 unit of stock solution, you need to add 4 units of solvent to make a total of 5 units. This can be expressed as a ratio of stock solution to solvent as 1:4. To find the amount of stock solution needed, you can use the following equation:

Plugging in the given values, we get:

Solving for the volume of stock solution, we get:

Therefore, you would need to pipette 2.6 mL of stock solution to make a 1:5 dilution with a final volume of 13 mL.

To learn more about final volume, here

https://brainly.com/question/2454734

#SPJ4

The rate of the reaction is directly proportional to the stability of the carbocation intermediate, and any changes in the solvent will affect the rate of the reaction.

In an SN1 reaction, the rate-determining step is the formation of a carbocation intermediate. The stability of the carbocation intermediate affects the rate of the reaction.

In this case, if 2-propanol (isopropanol) was used instead of 2-methyl-2-propanol (t-butanol), the rate of the reaction would decrease. This is because the carbocation intermediate formed in 2-propanol is less stable compared to the one formed in t-butanol.

The carbocation intermediate formed in t-butanol is tertiary, which is more stable than the one formed in isopropanol, which is secondary. This means that the reaction will be slower in isopropanol due to the less stable carbocation intermediate.

To learn more about : reaction

https://brainly.com/question/29470602

#SPJ11

Answer:

In order is 2, 3, 4, 1

Explanation:

It starts when you come into contact with a trigger that you inhale, swallow, or get on your skin. In response, your body starts to make a protein called IgE, which grabs onto the allergen. Then histamine and other chemicals get released into the blood.

the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

To calculate the overlap integral between two linear combinations of atomic orbitals on a carbon atom in ethene, we first need to express the orbitals in terms of the hydrogen-like atomic orbitals. Let's assume that the two orbitals are denoted as ψ1 and ψ2, and can be expressed as linear combinations of the hydrogen-like atomic orbitals ϕ1 and ϕ2 as follows:

ψ1 = c1ϕ1 + d1ϕ2
ψ2 = c2ϕ1 + d2ϕ2

where c1, d1, c2, and d2 are constants.

The overlap integral between these two orbitals can be calculated using the following formula:

S = ∫ψ1ψ2*dτ

where dτ represents the infinitesimal volume element.

Substituting for ψ1 and ψ2, we get:

S = ∫(c1ϕ1 + d1ϕ2)(c2ϕ1 + d2ϕ2)*dτ

Expanding the product, we get:

S = c1c2∫ϕ1ϕ1*dτ + c1d2∫ϕ1ϕ2*dτ + d1c2∫ϕ2ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Since the hydrogen-like atomic orbitals are orthonormal, the integral of ϕ1ϕ2 and ϕ2ϕ1 will be zero. Therefore, we can simplify the expression as follows:

S = c1c2∫ϕ1ϕ1*dτ + d1d2∫ϕ2ϕ2*dτ

Using the orthonormality of the hydrogen-like atomic orbitals, we know that the integral of ϕ1ϕ1 and ϕ2ϕ2 will both be equal to 1. Therefore, the overlap integral simplifies to:

S = c1c2 + d1d2d1d2.

In order to calculate the value of S, we need to know the values of the constants c1, d1, c2, and d2. These constants will depend on the specific linear combinations of atomic orbitals that we are considering. Without this information, we cannot calculate the value of the overlap integral.

Visit to know more about Integral:-

brainly.com/question/22008756

#SPJ11

If two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene, then value of the overlap integral [tex]S_{12} = \int{\phi_{1}}^{*}\phi_{2}d \tau[/tex], is equals to zero. So, option(b) is correct.

Orthonormal atomic orbitals are follow the following property:

Now, we have provide that two orbitals are as a linear combinations of two atomic orbitals on carbon atom in ethene. [tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

In the ethylene molecule, consists each carbon atom is bonded to two hydrogen atoms. Therefore, for the C-H, σ bond (sp²(C) - 1s(H)) in ethylene, the two sp² hybrid orbitals overlap with the 1s orbitals of the two hydrogen atoms. Let the hydrogen-like atomic orbitals, [tex]\psi_{2 s} and {\psi_{2p} }_{2}[/tex] are orthonormal to each other. So, the overlap integral [tex]S_{12} = \int{ \phi_{1}}^{*}\phi_{2}d \tau[/tex]

[tex] = \int \frac{1}{\sqrt{2}}( \psi_{2s} + {\psi_{2p} }_{2}) \frac{1}{\sqrt{2}}( \psi_{2s} - {\psi_{2p} }_{2})d \tau\\ [/tex]

[tex] = \frac{1}{\sqrt{2}}( \int \psi_{2s}\psi_{2s} d \tau + \int {\psi_{2p} }_{2}\psi_{2s} d \tau - \int \psi_{2s} {\psi_{2p}}_{2} d \tau - \int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d \tau) \\ [/tex].

Using above formula, [tex]\psi_{2 s} [/tex] and [tex]{\psi_{2p} }_{2}[/tex] are orthonormal so, [tex]\int \psi_{2 s} {\psi_{2p} }_{2} d\tau = 0[/tex]. Also [tex]\psi_{2 s} [/tex] and [tex]\psi_{2 s}[/tex] are normalised so [tex]\int \psi_{2 s} \psi_{2 s} d\tau = 1[/tex]. Similarly [tex]\int {\psi_{2p} }_{2} {\psi_{2p} }_{2} d\tau = 1 [/tex].

Substitute all integral values in equation (1),

= 1 + 0 - 0 - 1

= 0

Hence, the required integral value is 0.

For more information about atomic orbitals, visit :

https://brainly.com/question/30911211

#SPJ4

Complete question:

given two orbitals as linear combinations of two atomic orbitals on carbon atom in ethene:

[tex]\phi_{1 } = \frac{1}{ \sqrt{2} } ( {\psi_{2s }} + {\psi_{2p }}_{2})[/tex]

[tex]\phi_{2 } = \frac{1}{ \sqrt{2} } ( \psi_{2 s} - {\psi_{2p} }_{2})[/tex]

where the hydrogen-like atomic orbitals are orthonormal. what is the value of the overlap integral,

[tex] S_{12} = \int \phi_{1} \times \phi_{2}dr[/tex]

a) 1

b) 0

c) 1.5

d) 2

The sour mash used to make distilled spirits is blank is the liquid fermented grain that is collected from the previous batch.

The Sour mash or we can say that the  sourmash is the process that is used in the industry of the distilling which uses the material from the older batch of the mash and to start the fermentation for the new batch, the analogous to the make of the sourdough bread with the starter.

Therefore, the liquid fermented grain that is collected from the previous batch is the sour mash used to make the distilled spirits is blank.

To learn more about fermentation here

https://brainly.com/question/20662833

#SPJ4