i need some help with this physics question

A roller coaster accelerates at 8.75 m/s² from rest to a final velocity of 70 m/s it takes 8 sec to speed up.

For more information on time of roller coaster kindly visit to

https://brainly.com/question/18002471

#SPJ1

To find the acceleration of the 1-kg wrench after it leaves the 100-kg astronaut's hand when thrown with a force of 1 N, you can use Newton's second law of motion:

Newton's second law of motion, also known as the law of acceleration, states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Mathematically, the second law can be expressed as:

Force = mass x acceleration.

Step 1: Identify the known values.
Force (F) = 1 N
Mass (m) = 1 kg

Step 2: Use Newton's second law of motion to calculate acceleration (a).
F = m * a
1 N = 1 kg * a

Step 3: Solve for acceleration (a).
a = F / m
a = 1 N / 1 kg
a = 1 m/s²

The acceleration of the wrench after it leaves the astronaut's hand is 1 m/s².

To learn more about Newton's second law of motion. Please Visit:

https://brainly.com/question/13447525

#SPJ11

Newton's second law of motion can be used to determine the acceleration of the 1-kg wrench after it leaves the 100-kg astronaut's hand when thrown with a force of 1 N:

The acceleration of an object is directly proportional to the force acting on it and inversely proportional to its mass, according to Newton's second rule of motion, commonly referred to as the law of acceleration. The second law can be defined mathematically as:

Mass times acceleration equals force.

Determine the values that are already known.

Mass (m) = 1 kg and Force (F) = 1 N

Step 2: Determine the acceleration (a) using Newton's second rule of motion.

F = m * a

1 N = 1 kg * a

Calculate acceleration (a) in step three.

a = F/m, a = 1 N/kg, a = 1 m/s2, etc.

After leaving the astronaut's hand, the wrench accelerates at a rate of 1 m/s2.

learn more about Newton's second law of motion here:

https://brainly.com/question/13447525

#SPJ11

To find the focal length of a convex lens, we can use the formula:
1/f = 1/di + 1/do

Where f is the focal length, di is the distance of the image from the lens, and do is the distance of the object from the lens.

We are given that the student is 2.50m away from the lens, so do = 2.50m. We are also given that the image is 1.80m from the lens, so di = 1.80m.

Plugging these values into the formula, we get:
1/f = 1/1.80 + 1/2.50

Simplifying this equation, we get:
1/f = 0.5556

Multiplying both sides by f, we get:
f = 1.80 / 0.5556

Solving for f, we get:
f ≈ 3.24 meters

Therefore, the focal length of the convex lens is approximately 3.24 meters.

To know more about focal length of a convex lens:

https://brainly.com/question/1031772

#SPJ11

A convex lens is 1.80 meters from a student who is 2.50 meters distant, and its focal length is 1.04 meters.

To solve this problem, we can use the lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

In this problem, the object distance is do = 2.50 m and the image distance is di = 1.80 m. We can plug these values into the lens equation and solve for the focal length:

1/f = 1/do + 1/di

1/f = 1/2.50 + 1/1.80

1/f = 0.4 + 0.56

1/f = 0.96

f = 1/0.96

f ≈ 1.04 meters

Therefore, the focal length of the convex lens is approximately 1.04 meters.

To learn more about focal length, refer:-

https://brainly.com/question/29870264

#SPJ11

Under the circumstances, a balloon with a volume of 0.035 m³ could be filled from the helium gas tank.

At an altitude of 1000 metres, where the atmospheric pressure is measured to be 60.8 kPa, a weather balloon with a 2000-liter volume and a pressure of 96.3 kPa ascends.

PV = nRT

n = PV/RT = (15.5x10⁶ Pa x 0.020 m³) / (8.31 J/K/mol x 293 K) = 0.0148 mol

Next, we can use the ideal gas law again to find the new volume of the helium at the given conditions:

(P1V1)/T1 = (P2V2)/T2

We can solve for V2:

V2 = (P1V1T2)/(P2T1) = (15.5x10⁵ Pa x 0.020 m³ x 323 K)/(1 atm x 293 K) = 0.035 m³

To know more about circumstances visit:-

https://brainly.com/question/30499166

#SPJ1

The force constant of the spring in such a scale if it the spring stretches 8.30 cm for a 12.5 kg load would be 1479.28N.

To determine the force constant of the spring in the fisherman's scale, we can use Hooke's law, which states that the force applied to a spring is directly proportional to the amount it is stretched.

The formula for Hooke's law is F = -kx, where F is the force applied, k is the force constant of the spring, and x is the displacement of the spring from its equilibrium position.

In this case, we know that the spring stretches 8.30 cm (or 0.0830 m) for a load of 12.5 kg.

We can convert this to force using the formula

F = mg, where m is the mass of the object and g is the acceleration due to gravity[tex](9.81 m/s^2).[/tex]

Therefore,[tex]F = (12.5 kg)(9.81 m/s^2) = 122.63 N[/tex].

Using Hooke's law, we can rearrange the equation to solve for k:

k = -F/x.

Plugging in the values we have, we get

k = -(122.63 N)/(0.0830 m) = -1479.28 N/m.

Therefore, the force constant of the spring in the fisherman's scale is approximately 1479.28 N/m.

This means that for every 1 meter the spring is stretched, it will apply a force of 1479.28 N.

It's important to note that fishermen may not always report the mass accurately, but the force applied to the spring will still be proportional to the true mass.

For more such answers on Force Constant

https://brainly.com/question/25313999

#SPJ11

If a spacecraft is moving at 20,000 mph (in space), it will continue to move at 20,000 mph when its engines shut off.

The law that explains this is Newton's first law of motion.

Newton's first law of motion, also known as the law of inertia, states that an object at rest will stay at rest, and an object in motion will continue in motion with the same speed and direction, unless acted upon by an external force.

In the case of the spacecraft moving at 20,000 mph, it will continue to move at that speed when its engines shut off, because there are no external forces acting upon it in the vacuum of space.

To know more about Newton's first law of motion:

https://brainly.com/question/974124

#SPJ11

In the heat transfer relation for a heat exchanger, the quantity f is called the "effectiveness." It represents the ratio of the actual heat transfer rate in the heat exchanger to the maximum possible heat transfer rate under the given conditions.

The quantity f in the heat transfer relation for a heat exchanger is called the heat transfer coefficient correction factor. It represents the ratio of the actual heat transfer coefficient to the theoretical heat transfer coefficient. It takes into account the effects of fluid properties, flow conditions, and heat exchanger geometry on the heat transfer process.

Yes, f can be greater than 1. This occurs when the actual heat transfer coefficient is higher than the theoretical heat transfer coefficient, which can happen when there are enhancements to the heat transfer surface or when the fluid flow is optimized.

To know more about heat transfer coefficient correction factor:
https://brainly.com/question/30981087

#SPJ11

To make bulb H dimmer than it was in Circuit 9 (when 1 glow flowed through it), you will need to decrease the flow through H. To achieve this, you can:

1. Increase the resistance in the circuit, specifically in the path that includes bulb H. This can be done by adding more resistors or increasing the resistance of the existing components.
2. Decrease the voltage across the circuit. This will result in a reduced current flow, making bulb H dimmer.

By decreasing the flow through H, you will effectively make the bulb dimmer than it was in Circuit 9.

To know more about Resistance and Voltage:

https://brainly.com/question/30740265

#SPJ11

The best comment Francesca could make to Leonardo about his music is A. "I get why you like it, but you know it's not real life, right?"

This comment acknowledges Leonardo's interest in the music and doesn't come across as an attack on his taste or his friends. At the same time, it gently challenges the idea that the lyrics represent a desirable or realistic lifestyle.

It's important for Leonardo and his friends to understand that the behavior celebrated in the songs is often illegal or harmful and doesn't lead to long-term success or happiness.

Option B comes across as insulting and judgmental, which may cause Leonardo to become defensive or dismiss Francesca's concerns. Option C is not a helpful comment because it reinforces the idea that criminal behavior is a viable path to success. Option D is not necessarily true, and even if it were, it doesn't address the larger issue of the negative influence the music may have on Leonardo and his friends.

Learn more about music here:https://brainly.com/question/26138624

#SPJ1

the acceleration of the mass is 0.7212 m/s^2.

To find the acceleration of the mass, we need to first determine the net force acting on it. We can do this by using vector addition to add the two forces together.

Using the Pythagorean theorem, we can find the magnitude of the diagonal force:

sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = sqrt[225 + 100] = sqrt(325) = 18.03 N

The direction of this force can be found using the inverse tangent function:

theta =[tex]tan^{-1}(10.0N/15.0N)[/tex] = 33.69 degrees north of east

We can now use vector addition to find the net force on the mass:

F_net = sqrt[[tex](15N)^{2}[/tex] + [tex](10N)^{2}[/tex]] = 18.03 N, at an angle of 33.69 degrees north of east

To find the acceleration of the mass, we can use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration:

F_net = ma

Solving for the acceleration, we get:

a = F_net / m = 18.03 N / 25.0 kg = 0.7212 m/s^2

Therefore, the acceleration of the mass is 0.7212 m/s^2.

Learn more about Vector Addition:

https://brainly.com/question/19420810

The amplitude of the magnetic field of the electromagnetic wave is 6.53 x 10^-7 T.

To find the amplitude of the magnetic field of an electromagnetic wave, we need to use the relationship between the electric and magnetic fields in an electromagnetic wave.

According to this relationship, the amplitude of the magnetic field is equal to the amplitude of the electric field divided by the speed of light (c). Therefore, if the amplitude of the electric field of an electromagnetic wave is 196 V/m, the amplitude of the magnetic field can be calculated as follows:

Amplitude of magnetic field = Amplitude of electric field / Speed of light
Amplitude of magnetic field = 196 V/m / 3 x 10^8 m/s
Amplitude of magnetic field = 6.53 x 10^-7 T

It is important to note that the amplitude of the magnetic field and the electric field of an electromagnetic wave are perpendicular to each other and are responsible for the wave's propagation through space.

To learn more about : electromagnetic

https://brainly.com/question/13874687

#SPJ11

True a significant factor in algal blooms and the excessive growth of aquatic vegetation that results in competition for sunlight and congestion.

Job competition is fierce. Computer firms compete fiercely with one another. The two businesses are in opposition to one another.It can also be described more broadly as the either direct or indirect relationship between species that affects fitness when they share a resource.When there is monopolistic competition, several vendors offer differentiated goods—goods with minor differences but similar functions.

Therefore, every animal, plant, mould, protist, organism, or archaeon found on Earth would be considered an organism. There are numerous methods to categorise these species.a single organism that uses its organs to carry out its life's functions

To know more about organism visit:

https://brainly.com/question/13278945

#SPJ1

If successful, Leibniz's argument, also known as the Cosmological Argument, does aim to prove the existence of a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe. The statement is true.

Leibniz's cosmological argument, also known as the Principle of Sufficient Reason, aims to demonstrate that there must be a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe. According to the argument, every contingent thing in the universe has an explanation for its existence, and this explanation must ultimately rest on a necessary being that exists by its own nature and does not depend on anything else for its existence. This necessary being, by definition, must possess the attributes mentioned above. Therefore, if the argument is successful, it would indeed prove the existence of a necessary, uncaused, timeless, spaceless, immaterial, personal creator of the universe.

To learn more about Cosmological Argument, refer:-

https://brainly.com/question/30027032

#SPJ11

The magnitude of the average velocity of the woodchuck is 0.71 m/s. The average speed of the woodchuck is 3.2 m/s.

Right distance = 19m

Time is taken to cover distance = 4.8s

Left distance = 12m

Time is taken to cover distance = 5s

total displacement = 19 m to the right - 12 m to the left = 7 m to the right

A. To calculate the magnitude of the average velocity, we need to find the total displacement and divide it by the total time.

The total time it took for the woodchuck to run both distances is:

The total time = 4.8 s + 5 s

The total time = 9.8 s

The magnitude of the average velocity is:

v = displacement/time

v  = 7 m / 9.8 s

v = 0.71 m/s

B. To find the average speed, we need to calculate the total distance traveled and divide it by the total time.

The total distance traveled is = 19 m + 12 m = 31 m

The total time it took for the woodchuck to run both distances is:

The average speed = total distance / total time

The average speed = 31 m / 9.8 s = 3.2 m/s

Therefore we can conclude that the magnitude of the average velocity is 0.71 m/s and the average speed is 3.2 m/s.

To learn more about average speed

https://brainly.com/question/14618248

#SPJ4

The reason we do not see the lines of hydrogen in the spectra of the hottest stars is due to the ionization of hydrogen atoms at high temperatures.

In these stars, the temperatures are so high that the electrons in the hydrogen atoms are stripped away, leaving behind only the protons. This ionized hydrogen does not produce the same spectral lines as neutral hydrogen, which is what we typically observe in cooler stars. Instead, the spectra of hot stars are dominated by lines from ionized metals, such as helium, carbon, and oxygen. So while hydrogen is indeed the most common element in the universe, its presence in the spectra of hot stars is not as prominent due to ionization.

More on hydrogen: https://brainly.com/question/30077093

#SPJ11

The velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

The peak voltage (V) of a generator is given by the equation V = NBAω, where N is the number of turns in the coil, B is the magnetic field strength, A is the area of the coil, and ω is the angular velocity of the coil.

We are given that the coil has 475 turns, a diameter of 8.00 cm, and rotates in a 0.250 T field. We can use these values to find the area of the coil:

radius = diameter/2 = 4.00 cm

[tex]area = π(radius)^2 = 50.27 cm^2[/tex]

Now we can solve for ω:

V = NBAω

[tex]ω = V/(NBA) = (475 V)/(475 turns)(0.250 T)(50.27 cm^2)(1 m^2/10,000 cm^2)(1 rev/2π radians)[/tex]

ω = 95.0 rev/min

Therefore, the velocity at which the peak voltage of the generator is 475 V is 95.0 revolutions per minute.

Learn more about The velocity

https://brainly.com/question/17127206

#SPJ4

1260 RPM. RPM = (Peak Voltage / (2 * pi * coil diameter * magnetic field strength)) * 60 can be used to compute this.

The formula Vp = NABw/2, where N is the number of turns in the coil, A is the coil's area, B is the strength of the magnetic field, and w is the coil's angular velocity, determines the peak voltage produced by a revolving coil. We arrive at w = 2Vp/(NAB) after solving for w. Since the coil diameter rather than the area is provided, we can apply the calculation A = pi*d2/4 to determine the area. After simplifying and substituting the given variables, we get at w = 2 * 475 / (475 * pi * 0.082 * 0.25) = 420 rad/s. Finally, we increase this by 60 / (2 * pi), which gives us 1260 RPM.

learn more about coil here:

https://brainly.com/question/27961451

#SPJ11

The current in the circuit is 0.698 A.

We can start by finding the reactance of the inductor using the formula:

XL = 2πfL

where XL is the inductive reactance, f is the frequency, and L is the inductance.

XL = 2π(59.9 Hz)(0.639 H) = 240.3 Ω

Since the lamp is a pure resistive load, its resistance is equal to the voltage across it divided by the current flowing through it:

R = V/I

where R is the resistance, V is the voltage, and I is the current.

R = 24.7 V / I

The total impedance of the circuit is given by:

Z = √([tex]R^2[/tex]+ X[tex]L^2)[/tex]

Since the inductor and lamp are connected in series, the current flowing through both is the same, and we can use Ohm's Law to find the current:

I = V/Z

Substituting in the values we have:

Z = √(R^2 + X[tex]L^2[/tex]) = √[(24.7 Ω/I[tex])^2[/tex] + (240.3 Ω[tex])^2[/tex]] = 242.2 Ω

I = V/Z = (169 V)/(242.2 Ω) = 0.698 A

Therefore, the current in the circuit is 0.698 A.

Learn more about Ohm's Law,

https://brainly.com/question/1247379

#SPJ4

Answer:

(i) The volume of the cylindrical beaker is given by:

V = A x h = (25 cm^2) x (10 cm) = 250 cm^3

The mass of the oil in the beaker is given by:

m_oil = density x volume = (0.8 g/cm^3) x (250 cm^3) = 200 g

The total mass of the beaker and oil is therefore:

m_total = m_beaker + m_oil = 50 kg + 0.2 kg = 50.2 kg

(ii) The volume of the aluminum is given by:

V_aluminum = m_aluminum / density = 66 g / (2.2 g/cm^3) = 30 cm^3

When the aluminum is lowered into the beaker, it displaces an equal volume of oil. Therefore, the volume of oil that overflows is 30 cm^3.

(iii) The final mass of the beaker and its contents is the sum of the mass of the beaker, the mass of the oil remaining in the beaker, and the mass of the aluminum:

m_final = m_beaker + m_oil + m_aluminum = 50 kg + 0.17 kg + 0.066 kg = 50.24 kg

To calculate the mass of the remaining oil, we need to subtract the volume of aluminum from the volume of the beaker and multiply by the density of the oil:

V_remaining_oil = (A x h) - V_aluminum = (25 cm^2 x 10 cm) - 30 cm^3 = 220 cm^3

m_remaining_oil = density x V_remaining_oil = 0.8 g/cm^3 x 220 cm^3 = 176 g

Therefore, the final mass of the beaker and its contents after the overflow liquid has been wiped off is 50.24 kg, and there is 176 g of oil remaining in the beaker

The values you mentioned are related to the motion of a typical object near the surface of the Earth.

The acceleration due to gravity, represented by "g", is approximately 9.8 [tex]m/s^2[/tex] at sea level. This value is constant and acts vertically downward, so it's common to see it represented as a negative value in equations. If an object is at rest on a level surface, then its acceleration in the x and y directions should be close to zero. This is because the object is not moving in those directions, so it's not accelerating.

Regarding the gyroscope values, a gyroscope is a device that measures angular velocity or rotation rate. If a gyroscope is at rest or is not undergoing any rotation, its output should be zero. This is because there is no change in angular velocity to measure. So, if all three gyroscope values are essentially zero, it suggests that the device is not rotating or undergoing any significant angular velocity changes.

In summary, the values you mentioned are related to the motion of objects on or near the Earth's surface, and their values reflect the physical laws that govern that motion.

Learn more about gyroscope

https://brainly.com/question/30214363

#SPJ4

The acceleration of the plane is: -55,090 km/(hour)²

What is an acceleration?

The initial velocity of the plane (758 km/sec) is much greater than the maximum possible speed of an airplane. It is possible that the initial velocity was meant to be 758 km/hour instead.

Assuming that the initial velocity was meant to be 758 km/hour and final velocity is 30 km/hour, the acceleration of the plane can be calculated using the formula:

acceleration = (final velocity - initial velocity) / time

Here, final velocity = 30 km/hour, initial velocity = 758 km/hour, and time = 48 seconds converted to hours is 48/3600 = 0.01333 hours.

Therefore, the acceleration of the plane is:

acceleration = (30 - 758) / 0.01333

acceleration = -55,090 km/(hour)²

The negative sign indicates that the plane is decelerating or slowing down. However, this answer seems unlikely as the acceleration is very high and may not be possible for an airplane to achieve. It is possible that the initial velocity was meant to be a lower value.

What is velocity?

Velocity is a physical quantity that describes the rate of change of an object's position with respect to time. It is a vector quantity, meaning it has both magnitude (speed) and direction.

In other words, velocity is the speed of an object in a particular direction. For example, a car moving at 60 km/hour to the east has a velocity of 60 km/hour to the east.

Velocity can be calculated as the change in position divided by the change in time:

velocity = change in position / change in time

The standard unit of velocity is meters per second (m/s) in the SI system, but it can also be expressed in other units such as kilometers per hour (km/hour) or miles per hour (mph).

To know more about velocity, visit:

https://brainly.com/question/2777725

#SPJ1

Complete question is: A plane lands on the runway and slows from 758 km/sec to 30 km/sec in 48 seconds, The acceleration of the plane is: -55,090 km/(hour)².

This statement is incorrect. The correct form of solid waste recycling in which the energy value of combustible waste materials is recovered is called "waste-to-energy" or "energy recovery."

Composting is a different form of solid waste recycling that involves the biological decomposition of organic materials to create a nutrient-rich soil amendment.

Here is a step-by-step explanation of the correct process:

Waste-to-energy (WTE) facilities receive solid waste, typically municipal solid waste, which is then sorted to remove recyclable materials such as plastics, metals, and paper.

The remaining waste is then burned in a specially designed furnace, called an incinerator, at high temperatures to create steam.

The steam drives turbines, which generate electricity that can be sold to the grid.

In addition to electricity generation, WTE facilities also recover the heat generated by the incineration process to provide heat to nearby buildings or industries.

The remaining ash from the incineration process can be used as a construction material, such as for roadbeds or building foundations.

WTE facilities are highly regulated and must meet strict emissions standards to ensure that the air and water quality in surrounding communities is not negatively impacted.

Overall, WTE is a form of solid waste recycling that can provide both energy generation and waste reduction benefits, while also reducing the need for landfill space.

Composting, on the other hand, is a separate process that involves the natural decomposition of organic waste materials to create a valuable soil amendment for use in agriculture and landscaping.

To know more about combustible waste :

https://brainly.com/question/8242764

#SPJ11

photoelectrons from metal 1 have a higher speed, a lower speed, or the same speed as photoelectrons from metal 2, If the kinetic energy of photoelectrons from metal 1 is higher than that of metal 2, then the photoelectrons from metal 1 have a higher speed. If the kinetic energy is lower, they have a lower speed. If the kinetic energies are equal, the photoelectrons have the same speed.

we need to consider the following steps:

1. Determine the work function of both metals (the minimum energy required to release an electron from the metal surface). The work function is specific to each metal.
2. Identify the energy of the incident light, which should be the same for both metals to make a fair comparison.
3. Use the photoelectric effect equation: Kinetic energy of photoelectrons = Energy of incident light - Work function of the metal.
4. Compare the kinetic energy of the photoelectrons from both metals.

If the kinetic energy of photoelectrons from metal 1 is higher than that of metal 2, then the photoelectrons from metal 1 have a higher speed. If the kinetic energy is lower, they have a lower speed. If the kinetic energies are equal, the photoelectrons have the same speed.

Learn more about photoelectrons at  brainly.com/question/16772624

#SPJ11

Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.

The three fundamental particles in an atom are protons, neutrons, and electrons. Protons have a positive charge and are located in the nucleus of the atom, along with neutrons, which have no charge. Electrons have a negative charge and orbit the nucleus. The number of protons in an atom determines its atomic number, which in turn determines the element to which it belongs.

The number of electrons in an atom determines its chemical properties, as they are involved in chemical bonding with other atoms. The charges of the particles are important in determining the behavior of atoms in chemical reactions and in the formation of molecules and compounds.

To know more about charge, here

brainly.com/question/3412043

#SPJ4

--The complete question is, Which fundamental particles have positive charges, and which have negative charges?--

Yes, when a person is spinning in the x-y plane, they have a uniform circular motion.

Spinning is an exercise technique used to increase strength and endurance, as well as to burn fat. It involves using a stationary or spinning bike to simulate the experience of cycling outdoors. The intensity of the workout is determined by the instructor, usually by adjusting the resistance level of the bike. During a spinning session, the instructor will typically lead the class through a series of drills and exercises, while providing motivation and encouragement. Spinning is a great way to get a full body workout without having to go outdoors. It is also a low-impact activity that can be done by people of all fitness levels.

This is because the acceleration is constant and directed towards the centre of the circle, meaning that the speed and direction of the object remain the same throughout the motion. This is known as centripetal acceleration and it is what keeps the object moving in a uniform circle.

To learn more about spinning
https://brainly.com/question/29267031
#SPJ1

Radio waves are diffracted by large objects such as buildings, whereas light is not noticeably diffracted, because b) the wavelength of light is much smaller than the wavelength of radio waves.

The diffraction is the bending of waves around obstacles or through small openings, and the amount of diffraction is proportional to the size of the obstacle or opening and the wavelength of the wave. Since radio waves have much longer wavelengths than visible light, they are more easily diffracted by large objects such as buildings. On the other hand, visible light has a much smaller wavelength than radio waves, which makes it less prone to diffraction. Polarization and coherence are not directly related to diffraction.

Polarization refers to the direction of oscillation of the electromagnetic waves, while coherence refers to the consistency of phase between waves. Therefore, the correct answer is b) the wavelength of light is much smaller than the wavelength of radio waves. Radio waves are diffracted by large objects such as buildings, whereas light is not noticeably diffracted, because b) the wavelength of light is much smaller than the wavelength of radio waves.

Learn more about polarization at:

https://brainly.com/question/29217577

#SPJ11

The maximum EMF induced in the coil by the Earth's magnetic field is zero.

We can use Faraday's law of electromagnetic induction to calculate the maximum EMF induced in the coil by the Earth's magnetic field. Faraday's law states that the EMF induced in a coil is equal to the rate of change of the magnetic flux through the coil.

Assuming the loop is a circle of radius r, the magnetic flux through the loop due to the Earth's magnetic field is given by:

Φ = B * A * cosθ

where B is the horizontal component of the Earth's magnetic field, A is the area of the loop, and θ is the angle between the normal to the loop and the direction of the magnetic field. Since the loop is lying flat on the ground, θ = 0, and cosθ = 1.

The area of a circle is A = π[tex]r^2[/tex], so we have:

Φ = B * π[tex]r^2[/tex]

The rate of change of the magnetic flux through the loop is given by the time derivative of Φ:

dΦ/dt = d(B * π[tex]r^2[/tex])/dt = π[tex]r^2[/tex] * dB/dt

Since the horizontal component of the Earth's magnetic field is constant, dB/dt = 0, so the rate of change of the magnetic flux is zero.

Therefore, the maximum EMF induced in the coil by the Earth's magnetic field is zero.

Learn more about magnetic field

https://brainly.com/question/14848188

#SPJ4

Battery-powered devices require the correct orientation of the battery to function properly.

The difference between being able to reverse the orientation of a plug in a wall outlet versus a battery has to do with the type of electrical current being used.

Wall outlets provide AC (alternating current) power, which means that the direction of the electrical flow switches back and forth rapidly. This means that the orientation of the plug doesn't matter, since the current will flow in either direction.

In contrast, batteries provide DC (direct current) power, which means that the electrical flow only goes in one direction. If a battery is inserted backwards, the current will flow in the wrong direction and the device won't work properly or may even be damaged. Therefore, battery-powered devices require the correct orientation of the battery to function properly.

Learn more about Battery-powered devices

https://brainly.com/question/13530533

#SPJ4

For battery-powered gadgets to operate properly, the battery must be positioned correctly.

The type of electrical current being utilised determines whether a plug in a wall outlet can be turned around vs whether a battery can.

The electricity that comes out of wall plugs is AC (alternating current), which means that the flow of electricity rapidly changes direction. Because the current can flow in either direction, the plug's orientation is irrelevant.

Batteries, on the other hand, deliver DC (direct current) power, which refers to electrical flow that only occurs in one direction. The device won't function properly or might even be harmed if a battery is inserted backwards since the current will flow in the wrong direction. As a result, batteries must be oriented appropriately for battery-powered gadgets to work properly.

Learn more about Battery-powered devices here:

https://brainly.com/question/13530533

#SPJ11

Answer: Changing state from a liquid to a solid

Explanation: When liquid water loses thermal energy, it gets cold and undergoes freezing.

The new velocity of the less massive train car has a velocity of 10 m/s after the collision.

Velocity is a measure of the rate and direction of an object's motion. It is a vector quantity, meaning it has both magnitude and direction. Velocity is typically represented by the equation v = s/t, where v is the velocity, s is the displacement (or distance travelled), and t is the time taken. Velocity is often confused with speed, which is the measure of the magnitude of an object's motion. Speed is a scalar quantity and is represented by the equation s = t/v.

The total momentum of the two train cars before the collision is calculated by multiplying the mass of each car by its velocity.

The total momentum of the system before the collision is 2000 kg x 10 m/s + 1000 kg x 3 m/s = 23000 kg m/s.

The total momentum of the system after the collision is 2000 kg x 6 m/s + 1000 kg x v, where v is the velocity of the less massive train car after the collision.

Therefore, we can set up the equation 23000 = 12000 + 1000v and solve for v.

v = 10 m/s.

To learn more about velocity

https://brainly.com/question/24445340

#SPJ1

Option (a).

A converging lens is used to make a magnifying glass, which works by bending light to create a magnified image.

The curved surface of the lens helps to focus and magnify the object being viewed.

Learn more about lens https://brainly.com/question/15123066

#SPJ11