what is a asteroid traveling rapidly called
Answer:
meteor
Explanation:
A asteroid stays still and a meteor goes fast
Answer:
meteor
Explanation:
or some people call it a shooting star
A Car is moving at a speed of 20 m/s. How Much Distance it will cover in 1 min? Express the answer in km.
Answer:
d=20m/sx60s=1200m=1200/1000Km=1.2km
Explanation:
Where the air conditioner disconnecting means is not within sight from the equipment, the provision for locking or adding a lock to the disconnecting means shall be on the switch or circuit breaker and remain in place _____ the lock installed.
Answer:
With or without.
Explanation:
According to the National Electrical Code (NEC), here the air conditioner disconnecting means is not within sight from the equipment, the provision for locking or adding a lock to the disconnecting means shall be on the switch or circuit breaker and remain in place with or without the lock installed. Thus, this is in accordance with section 110.25 of the National Electrical Code (NEC).
Nikki was walking around a department store shopping one day, and did not realize that the shirt she was wearing looked just like the shirts worn by employees. When a stranger asked, "do you work here," she thought it was funny. The other customers' assumption that Nikki was a store employee demonstrates the Gestalt principle of _______.
Answer: Similarity
By.
Calculate the displacement and velocity at times of (a) 0.500, (b) 1.00, (c) 1.50, (d) 2.00, and (e) 2.50 s for a rock thrown straight down with an initial velocity of 14.0 m/s from the Verrazano Narrows Bridge in New York City. The roadway of this bridge is 70.0 m above the water
Answer:
See explanation below
Explanation:
This is a typical exercise of free falling. In this case a rock thrown straight down from the bridge, and we are asked to determine the final velocity of the rock and it's displacement at those given times.
First, just for this problem, as the rock is going straight down, we'll say that the downward direction is positive, therefore, the following expressions to calculate velocity and speed will be:
V = V₀ + gt (1)
X = V₀t + gt²/2 (2)
In this case, g = 9.8 m/s²
Now, let's see the displacement and velocity for each given time:
a) For t = 0.5 s
V = 14 + (9.8)*0.5
V = 18.9 m/s
X = (14*0.5) + (9.8)(0.5)²/2
X = 7 + 1.225
X = 8.225 m
b) For t = 1.00 s
V = 14 + (9.8)*1
V = 23.8 m/s
X = (14*1) + (9.8)(1)²/2
X = 14 + 4.9
X = 18.9 m
c) For t = 1.5 s
V = 14 + (9.8)*1.5
V = 28.7 m/s
X = (14*1.5) + (9.8)(1.5)²/2
X = 21 + 11.025
X = 32.025 m
d) For t = 2 s
V = 14 + (9.8)*2
V = 33.6 m/s
X = (14*2) + (9.8)(2)²/2
X = 28 + 19.6
X = 47.6 m
e) For t = 2.50 s
V = 14 + (9.8)*2.5
V = 38.5 m/s
X = (14*2.5) + (9.8)(2.5)²/2
X = 35 + 30.625
X = 65.625 m
Hope this helps
Describe Kinetic Energy and Potential Energy (in your own words please!!)
Answer:
Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.
Explanation:
Which three statements are true of all matter?
A.
It is filled with air.
B.
It takes up space.
C.
It contains aluminum.
D.
It has mass.
E.
It is made up of atoms
Answer:
B, D and E, not all matter can be filled with air
HELP ASAP PLEASE
Which 2 factors must be present for chemical vapor deposition to be successful:
A.) The size of the diamond is larger than the most.
B.) The conditions during cooling are controlled.
C.) The heat in a vacuum forms a gas of single atoms.
D.) The heat in a vacuum is decreased to freezing.
E.) The pressure of a reaction vessel is negative.
Anyone know this question?
True or false it is impossible to determine weather you are moving unless you can touch another object
Answer: false
Explanation:
Answer:
false
Explanation:
According to Newton's First Law of motion, an object remains in the same state of motion unless a resultant force acts on it.
The cart is given an initial push up the ramp. After this push, as the car moves up the ramp, the direction of the acceleration of the cart is ________ the ramp. After the reaches its highest point, turns around, and begins moving down the ramp, the direction of the acceleration of the cart is ________ the ramp. At the highest point the cart reaches on the ramp, when the cart momentarily comes to rest, the magnitude of the acceleration of the cart is _______.
Answer:
Explanation:
The only force acting on the cart is a component of its weight parallel to ramp downwards . No other force acts parallel to the ramp .
Even when the cart is moving up after the initial push , its weight is acting downwards so acceleration is acting downwards .
When the cart is stationary at the top position , its weight is acting downwards so acceleration is downwards at that moment also . When the cart is going downwards , still its weight is acting down so acceleration is acting downwards .
After this push, as the car moves up the ramp, the direction of the acceleration of the cart is _down _______ the ramp. After the reaches its highest point, turns around, and begins moving down the ramp, the direction of the acceleration of the cart is _down ________ the ramp. At the highest point the cart reaches on the ramp, when the cart momentarily comes to rest, the magnitude of the acceleration of the cart is _downwards ______.
The current supplied by a battery in a portable device is typically about 0.122 A. Find the number of electrons passing through the device in two hours.
kenneth ran a marathon (26.2 miles) in 5.5 hours. What was Kenneth’s average speed? (Round your answer to the nearest tenth.)
0.2 mph
4.8 mph
5.5 mph
144.1 mph
it is actually science i couldn't find the word science
Answer:
4.8mph
Explanation:
Speed= Distance/time
Speed= 26.2/5.5
= 4.76mph
( To the nearest tenth ) = 4.8mph
Answer:
38.7 mph
Explanation:
I just add all the numbers together then divided them by 4, which is the amount of numbers you gave.
when air mass is caught between two cold fronts the result is a _______ front.
Answer choices
A.occluded
B.warm
C.cold
D.stationary
A circuit has 12 Amps and 220 Volts. What is the Resistance of the circuit?
Answer:
:To find the Voltage, ( V ) [ V = I x R ] V (volts) = I (amps) x R (Ω)
To find the Current, ( I ) [ I = V ÷ R ] I (amps) = V (volts) ÷ R (Ω)
To find the Resistance, ( R ) [ R = V ÷ I ] R (Ω) = V (volts) ÷ I (amps)
To find the Power (P) [ P = V x I ] P (watts) = V (volts) x I (amps)
A car of mass 150 kg is riding down at constant velocity. What is the normal force?
The formula is ( Fg=mg ; Fnet =ma ; Fx = Fcos theta ; Fy = Fsin theta)
Answer and I will give you brainiliest
Answer:
1500N
Explanation:
Normal force = mg - F sin theta
constant velocity means acceleration = 0
F= ma = 150× 0 = 0N
thus;
normal force = mg = 150 × 10 = 1500N
Answer:
864N
Explanation:
A bartender slides a beer mug at 1.3 m/s towards a customer at the end of a frictionless bar that is 1.3 m tall. The customer makes a grab for the mug and misses, and the mug sails off the end of the bar. (a) How far away from the end of the bar does the mug hit the floor
Answer:
x = 0.67 m
Explanation:
For this problem, let's use the projectile launch equations, as the jug goes through the bar, it comes out with horizontal speed vx = 1.3 m / s, which does not decrease as there is no friction.
Let's find the time or it takes to get to the floor
y = y₀ + v_{oy} - ½ g t²
in this case I go = 0 and when I get to the floor y = 0
0 = y₀ + 0 - ½ g t²
t² = 2y₀ / g
t² = 2 1.3 / 9.8 = 0.2653
t = 0.515 s
now let's find the distance traveled in this time
x = vx t
x = 1.3 0.515
x = 0.6696 m
x = 0.67 m
What happens to the force attraction of the distance two objects is increased?
Answer:
Explanation:
The attraction weakens. Two objects that are farther apart are not drawn together as strongly as if they were close together.
You are given three pieces of wire that have different shapes (dimensions). You connect each piece of wire separately to a battery. The first piece has a length L and cross-sectional area A. The second is twice as long as the first, but has the same thickness. The third is the same length as the first, but has twice the cross-sectional area. Rank the wires in order of which carries the most current (has the lowest resistance) when connected to batteries with the same voltage difference.
Rank the wires from most current (least resistance) to least current (most resistance).
a. Wire of Lenght L and area A
b. Wire of Lenght 2L and area A
c. Wire of Lenght L and area 2A
Answer:
The answer is below
Explanation:
The resistance of a wire is directly proportional to the length of the wire and inversely proportional to its area. The resistance (R) is given by:
[tex]R=\frac{\rho L}{A}\\\\where\ L=length \ of\ wire,A=cross\ sectional\ area, \rho=resistivity\ of\ wire.[/tex]
Let us assume that all the wires have the same resistivity.
a) Wire of Length L and area A
[tex]R_1=\frac{\rho L}{A}[/tex]
b) Wire of Length 2L and area A
[tex]R_2=\frac{\rho *2L}{A}=2R_1[/tex]
C) Wire of Length L and area 2A
[tex]R_3=\frac{\rho L}{2A}=\frac{1}{2}R_1[/tex]
Therefore the wire of least resistance is R3 and R2 has the highest resistivity.
R₃ < R₁ < R₂
Therefore, the ranking of the wires from most current (least resistance) to least current (most resistance) is:
R₃ < R₁ < R₂
A person is holding a bucket by applying a force of 10N. He moves a horizontal distance of 5m and then climbs up a vertical distance of 10m. Find the total work done by him?
Answer:
dgfggddhdbxbxjxddhsnsxnc
Along the remote Racetrack Playa in Death valley, California, stones sometimes gouge out prominent trails in the desert floor, as if they had been migrating. For years curiosity mounted about why the stones moved. One explanation was that strong winds during the occasional rainstorms would drag the rough stones over ground softened by rain. When the desert dried out, the trails behind the stones were hard-baked in place. According to measurements, the coefficient of kinetic friction between the stones and the wet playa ground is about 0.80. What horizontal force is needed on a 25 kg stone (a typical mass) to maintain the stone's motion once a gust has started it moving
Answer:
F = 196 N
Explanation:
For this exercise we will use Newton's second law, we define a reference system with the x axis in the direction of movement of the stones and the y axis vertically
Y axis
N- W = 0
N = mg
X axis
F -fr = ma
In this case, they ask us for the force to keep moving, so the stones go at constant speed, which implies that the acceleration is zero.
F- fr = 0
F = fr
the friction force has the equation
fr = μ N
fr = μ mg
we substitute
F = μ mg
let's calculate
F = 0.80 9.8 25
F = 196 N
A system with a mass of 10 kg, initially moving horizontally with a velocity of 20 m/s, experiences a constant horizontal force of 25 N opposing the direction of motion. As a result, the system comes to rest. Determine the amount of energy transfer by work, in kJ, for this process and the total distance, in m, that the system travels
Answer:
Explanation:
Kinetic energy of the mass of 10 kg
= 1/2 m v² , m is mass and v is velocity .
= .5 x 10 x 20²
= 2000 J
The opposing force stops it . so work done by opposing force will be equal to this energy and it will be negative .
So energy transfer will be - 2000 J .
= 2 kJ .
If distance travelled by mass is d , force 25 N will have a displacement of d . so work done by force of 25 N
= 25 x d
25 d = 2000
d = 80 m .
Hence system travels a distance of 80 m .
Electric power is to be generated by installing a hydraulic turbine-generator at a site 120 m below the free surface of a large water reservoir that can supply water at a rate of 2300 kg/s steadily. Determine the power generation potential.
Answer:
the power generation potential is 2.705 x 10⁶ J/s.
Explanation:
Given;
height below the free surface of a large water reservoir, h = 120 m
mass flow rate of the water, m' = 2300 kg/s
The power generation potential is calculated as;
[tex]Power = \frac{Energy}{time} = \frac{F\times h}{t} = \frac{(mg) \times h}{t} = \frac{m}{t}\times gh = m' \times gh\\\\Power = m' \times gh\\\\Power = 2300 \ kg/s \ \times \ 9.8 \ m/s^2 \ \times \ 120 \ m\\\\Power = 2.705 \times 10^6 \ J/s[/tex]
Therefore, the power generation potential is 2.705 x 10⁶ J/s.
2. Who was the first to show ancient hieroglyphs of swimming?
Answer:
Rafi Bahalul
Explanation:
Israeli Haaretz newspaper reported Feb. 4 that Rafi Bahalul stumbled upon a 3,400-year-old Egyptian stone anchor engraved with hieroglyphs during a morning swim along Israel's northern shores last year.
list 5 types of food that should be consumed daily in a healthy diet.Give an example of each type.
Answer:
vegetables and legumes or beans
fruit
lean meats and poultry, fish, eggs, tofu, nuts and seeds, legumes or beans
grain (cereal) foods, mostly wholegrain or high cereal fibre varieties
milk, yoghurt, cheese or alternatives, mostly reduced fat.
Explanation:
Foods are grouped together because they provide similar amounts of key nutrients. For example, key nutrients of the milk, yoghurt, cheese and alternatives group include calcium and protein, while the fruit group is a good source of vitamins, especially vitamin C.
I need help please will mark brainliest
Answer:
c
Explanation:
Lolliguncula brevis squid use a form of jet propulsion to swim—they eject water out of jets that can point in different directions, allowing them to change direction quickly. When swimming at a speed of 0.15m/s0.15m/s or greater, they can accelerate at 1.2m/s21.2m/s 2 .
(a) Determine the time interval needed for a squid to increase its speed from 0.15m/s0.15m/s to 0.45m/s0.45m/s.
(b) What other questions can you answer using the data?
Answer:
a) t = 0.25 s, b) x = 0.075 m
Explanation:
a) For this exercise we will use kinematic relationships in one dimension
v = v₀ + a t
in the problem they indicate the initial velocity v₀ = 0.15 m / s, the final velocity v = 0.45 m / s and the acceleration of the squid a = 1.2 m / s²
t = [tex]\frac{v -v_o}{a}[/tex]
we calculate
t = [tex]\frac{0.45 - 0.15}{1.2}[/tex]
t = 0.25 s
b) We can also find the distance traveled during this acceleration
v² = v₀² + 2a x
x = [tex]\frac{v^2 -v_o^2 }{2a}[/tex]
let's calculate
x = [tex]\frac{0.45^2 - 0.15^2 }{2 \ 1.2}[/tex]
x = 0.075 m
Which one of the following statements is true concerning the magnitude of the electric field at a point in space? It is a measure of the electric force on any charged object. It is a measure of the ratio of the charge on an object to its mass. It is a measure of the electric force per unit mass on a test charge. It is a measure of the electric force per unit charge on a test charge. It is a measure of the total charge on the object.
Answer:
It is a measure of the electric force per unit charge on a test charge.
Explanation:
The magnitude of the electric field is defined as the force per charge on the test charge.
Since we define electric field as the force per charge, it will have the units of force divided by the unit of charge. This implies that the SI unit of electric field is given as Newton/Coulomb (N/C).
Because from the definition of the electric field intensity, it can be defined as force per unit charge. The correct answer is option D
ELECTRIC FIELDElectric field is the region of space where electric force can be felt. It can also be expressed as electric field intensity E. Mathematically, it can be expressed as;
E = F/q or E = V/d
From the question, the statements that is true concerning the magnitude of the electric field at a point in space is " It is a measure of the electric force per unit charge on a test charge "
Because from the definition of the electric field intensity, is can be defined as force per unit charge.
Therefore, option D is the right answer.
Learn more about Electric Field here : https://brainly.com/question/14372859
An important diagnostic tool for heart disease is the pressure difference between blood pressure in the heart and in the aorta leading away from the heart. Since blood within the heart is essentially stationary, this pressure difference can be inferred from a measurement of the speed of blood flow in the aorta. Take the speed of sound in stationary blood to be c.
a. Sound sent by a transmitter placed directly inline with the aorta will be reflected back to a receiver and show a frequency shift with each heartbeat. If the maximum speed of blood in the aorta is v, what frequency will the receiver detect? Note that you cannot simply use the textbook Doppler Shift formula because the detector is the same device as the source, receiving sound after reflection.
b. Show that in the limit of low blood velocity (v <
f= 2fo v/c
Answer:
a) f ’’ = f₀ [tex]\frac{1 + \frac{v}{c} }{1- \frac{v}{c} }[/tex] , b) Δf = 2 f₀ [tex]\frac{v}{c}[/tex]
Explanation:
a) This is a Doppler effect exercise, which we must solve in two parts in the first the emitter is fixed and in the second when the sound is reflected the emitter is mobile.
Let's look for the frequency (f ’) that the mobile aorta receives, the blood is leaving the aorta or is moving towards the source
f ’= fo[tex]\frac{c+v}{c}[/tex]
This sound wave is reflected by the blood that becomes the emitter, mobile and the receiver is fixed.
f ’’ = f’ [tex]\frac{c}{ c-v}[/tex]
where c represents the sound velocity in stationary blood
therefore the received frequency is
f ’’ = f₀ [tex]\frac{c}{c-v}[/tex]
let's simplify the expression
f ’’ = f₀ \frac{c+v}{c-v}
f ’’ = f₀ [tex]\frac{1 + \frac{v}{c} }{1- \frac{v}{c} }[/tex]
b) At the low speed limit v <c, we can expand the quantity
(1 -x)ⁿ = 1 - x + n (n-1) x² + ...
[tex]( 1- \frac{v}{c} ) ^{-1} = 1 + \frac{v}{c}[/tex]
f ’’ = fo [tex]( 1+ \frac{v}{c}) ( 1 + \frac{v}{c} )[/tex]
f ’’ = fo [tex]( 1 + 2 \frac{v}{c} + \frac{v^2}{ c^2} )[/tex]
leave the linear term
f ’’ = f₀ + f₀ 2[tex]\frac{v}{c}[/tex]
the sound difference
f ’’ -f₀ = 2f₀ v/c
Δf = 2 f₀ [tex]\frac{v}{c}[/tex]
You have three objects of varying shapes and sizes: Object 1 is a rectangular block of tin. Object 2 is a cube of aluminum. Object 3 is a sphere of copper.
a. the density of tin is 5.75g/cm2. What is the mass of object 1 in kg if the rectangular block has a volume of 1.34L?
b. what is the volume in cubic inches of object 2 if the cube of aluminum 7.58 inches on a side?
c. what is the mass in kg of object 2? the density of aluminum is 2.70g/cm3
d. what is the volume in cm3 of object 3 if the sphere of copper has a diameter 8.62cm? the volume of the sphere is 4 {pi}^3/3
e. what is the mass in kg of object 3? Copper has a density of 8.96g/cm3
Answer: a. m = 7.7 kg
b. V = 435.52 in³
c. m = 1927 kg
d. V = 335.37 cm³
e. m = 3 kg
Explanation: Density is the ratio of mass per volume, i.e., it's the measure of an object's compactness. Its representation is the greek letter ρ.
The formula for density is
[tex]\rho=\frac{m}{V}[/tex]
Density's unit in SI is kg/m³, but it can assume lots of other units.
Some unit transformations necessary for the resolution of the question:
1 L = 1 dm³ = 1000 cm³
1 in³ = 16.3871 cm³
1 g = 0.001 kg
a. V = 1.34 L = 1340 cm³
[tex]\rho=\frac{m}{V}[/tex]
[tex]m=\rho.V[/tex]
m = 5.75 * 1340
m = 7705 g => 7.705 kg
Mass of object 1 with volume 1.34L is 7.7 kg.
b. A cube's volume is calculated as V = side³
V = 7.58³
V = 435.52 in³
Volume of object 2 is 435.52 in³.
c. Using 1 in³ = 16.3871 cm³ to change units:
V = 435.52 * 16.3871
V = 713689.4 cm³
Then, mass will be
[tex]m=\rho.V[/tex]
m = 2.7 * 713689.4
m = 1926961.4 g => 1927 kg
Mass of object 2 is 1927 kg.
d. Volume of a sphere is calculated as [tex]V=\frac{4}{3}.\pi.r^{3}[/tex]
Diameter is twice the radius, then r = 4.31 cm.
Volume is
[tex]V=\frac{4}{3}.\pi.(4.31)^{3}[/tex]
V = 335.37 cm³
Volume of object 3 is 335.37 cm³.
e. [tex]m=\rho.V[/tex]
m = 8.96 * 335.37
m = 3004.91 g => 3 kg
Mass of object 3 is 3 kg.