Answer:
a gas dissolved in a solid
Explanation:
The ice that comprise of small amount of dissolved air represent the type of soluton that have a solid dissolved in a gas.
What is gas?Gas could be considered as the one of the four fundamental states of matter.
A pure gas should be made of individual atoms, elemental molecules that consist from one type of atom, or compound molecules that consist of a variety of atoms.
A gas mixture could be in the form of air that comprise a variety of pure gases.
learn more about gas here: https://brainly.com/question/17488113
A 5.00 mL sample of hydrochloric acid is titrated with 0.1293 M ammonia (a base). If the titration required 28.15 mL of ammonia, determine the following:
the original concentration of the acid
the original pH of the acid
Answer:
1. C = 0.73 M.
2. pH = 0.14
Explanation:
The reaction is the following:
HCl + NH₃ ⇄ NH₄⁺Cl⁻
From the titration, we can find the number of moles of HCl that were neutralized by the ammonia.
[tex] n_{a} = n_{b} [/tex]
Where "a" is for acid and "b" is for base.
The number of moles is:
[tex] n = C*V [/tex]
Where "C" is for concentration and "V" for volume.
[tex] C_{a}V_{a} = C_{b}V_{b} [/tex]
[tex] C_{a} = \frac{0.1293 M*28.15 mL}{5.00 mL} = 0.73 M [/tex]
Hence the initial concentration of the acid is 0.73 M.
The original pH of the acid is given by:
[tex] pH = -log([H^{+}]) [/tex]
[tex] pH = -log(0.73) = 0.14 [/tex]
Therefore, the original pH of the acid is 0.14.
I hope it helps you!
9. Thallium-208 has a half-life of 3.053 min. How long will it take for 120 g of it to decay
to 7.5 g?
Answer:
12.213 minutes will be taken for 120 g-Thalium-208 to decay to 75 grams.
Explanation:
Radioactive isotopes decay exponentially in time, the mass of the isotope ([tex]m(t)[/tex]), in grams, is described by the formula in time ([tex]t[/tex]), in minutes:
[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex] (1)
Where:
[tex]m_{o}[/tex] - Initial mass of the isotope, in grams.
[tex]\tau[/tex] - Time constant, in minutes.
In addition, the time constant associated with the isotope decay can be described in terms of half-life ([tex]t_{1/2}[/tex]), in minutes:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (2)
If we know that [tex]m(t) = 7.5\,g[/tex], [tex]m_{o} = 120\,g[/tex] and [tex]t_{1/2} = 3.053\,min[/tex], then the time taken by the isotope is:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex]
[tex]\tau = \frac{3.053\,min}{\ln 2}[/tex]
[tex]\tau \approx 4.405\,min[/tex]
[tex]t = -\tau \cdot \ln \frac{m(t)}{m_{o}}[/tex]
[tex]t = -(4.405\,min)\cdot \ln \left(\frac{7.5\,g}{120\,g} \right)[/tex]
[tex]t \approx 12.213\,min[/tex]
12.213 minutes will be taken for 120 g-Thalium-208 to decay to 75 grams.
12.21 minutes will it take for 120 g of Thallium-208 to decay
to 7.5 g.
What is half life period?Half life period is that time in which half of the reactant is convert into product.
In the question it is given that,
Initial mass of Thallium-208 = 120g
Final mass after decay = 7.5g
And half life of this decay = 3.053 min
Here we can calculate the total time of decay by the formula : T = t × n.
Where, T = total required time
t = half life
n = no. of half life required to decompose reactant.
120 → 60 →30 → 15 → 7.5
From the above sequence it is clear that we require 4 times of half life to decompose 120g to 7.5g.
So, T = 3.053 × 4 = 12.21 minutes
Hence, 12.21 minutes will it take to decay.
To learn more about half life, visit below link:
https://brainly.com/question/2320811
Please help!!!! Best answer will get brainliest
Answer:
covalent network
Explanation:
trust me on this one
An apple appears red when struck by white light. This appearance is because the red light is reflected and the other colors are absorb. What color will this apple appear to be when struck by blue yet.
A. black
B. blue
C. red
D. white
Explain how the percentages of nitrogen , oxygens and carbon dioxide in the earth atmosphere today have changed from the earth
Answer:
See below
Explanation:
The atmosphere of the earth hundreds of millions of years ago was only water vapour and carbon, both from the one ocean that existed around the continental body of Pangea. The photosynthesis process and exache (⊕) caused the percentages to decrease.
If you were to add salt to water , what temperature would you expect it to boil? Assume you’re at sea level
100 c
More than 100 c
Less than 100 c
Answer:
100c
Explanation:
At 40 mph, how long does it take to travel 64 miles
8. What is the chemical equation when calcium chloride combines with water?
Answer:
CaCI2 + H2O = Ca(OH)2 + HCI
Identify the element that cannot participate in nuclear fission reactions. (Hint: Think about the size of the atom.)
A.
hydrogen
B.
uranium
C.
thorium
D.
plutonium
Match each chemical reaction with the type of reaction that best describes it
Explanation:
Types of Chemical ReactionCombination Reaction.Decomposition Reaction.Displacement Reaction.Double Displacement Reaction.Oxidation and Reduction Reaction.stay safe healthy and happy.The specific heat capacities of some metals (in J g−1 K−1) are given below. Copper: 0.385 Magnesium: 1.020 Mercury: 0.138 Platinum: 0.130 If 100 kJ of heat is added to 10.0 g samples of each of the metals above, all at 25°C, determine which metal will have the smallest increase in temperature.
Answer: Magnesium metal will have the smallest increase in temperature.
Explanation:
Given: Specific heats are as follows.
Copper = 0.385 J/g K, Magnesium = 1.020 J/g K
Mercury = 0.138 J/g K, Platinum = 0.130 J/g K
Heat energy = 100 kJ (1 kJ = 1000 J) = 100000 J
mass = 10.0 g
Initial temperature = [tex]25^{o}C[/tex]
Formula used to calculate the increase in temperature for each of the given elements is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass
C = specific heat
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
The change in temperature for copper is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.385 J/g K \times (T_{2} - 25)\\T_{2} = 25999.026^{o}C[/tex]
The change in temperature for magnesium is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 1.020 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 9828.92^{o}C[/tex]
The change in temperature for mercury is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.138 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 72488.77^{o}C[/tex]
The change in temperature for platinum is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.130 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 76948.08^{o}C[/tex]
Thus, we can conclude that magnesium metal will have the smallest increase in temperature.
Which could be the pH of an aqueous solution with a H3O+ ion concentration that is less than its OH- ion concentration?
A. 2
B. 3
C. 4
D. 9
Answer:
Explanation:
You can think of pH as "parts Hydrogen ion," but remember that the pH scale is "backwards." The pH scale ranges from 0 to 14, with zero being the most acidic (highest concentration of H+) and 14 being the most basic.
The pH of an aqueous solution will be:
D. 9
When the [tex]H_3O^+[/tex] ion concentration is less than its [tex]OH^-[/tex] ion concentration.
What does pH tell?pH is used to indicate whether a solution is acidic or alkaline depending upon the pH of the solution. If pH is below 7 then the solution is acidic, if the pH is above 7 then the solution is basic and if the pH is 7 then the solution is neutral.
When the [tex]H_3O^+[/tex] ion concentration is less than its [tex]OH^-[/tex] ion concentration this means that the solution has more [tex]OH^-[/tex] ion and this makes the solution basic.
Thus, correct option is D, i.e. pH is 9.
Find more information about pH here:
brainly.com/question/24595796
Alternative fuel sources such solar and wind energy are gaining popularity and replacing fossil fuels in many applications. While there are many positive benefits to this technology, what negative impacts do they present?
Answer:
Environmental limitations.
Explanation:
The nonrenewable sources of energy include coal, oil natural gas, and nuclear power. While the renewable source of energy include tidal, solar, geothermal, and wind power. All the sources of nonrenewable energy are called fossil fuels. There are many positives of this alternate energy such as clean and clear energy. Though there may be some negative impacts such as land use changes for setting up solar panels, and windmill farms. These techniques are costly to maintain and implement in all sectors.What is the oxidation number of carbon in the compound carbon dioxide, CO2?
A) +3
B)+2
C)-3
D)+4
Answer:
the oxidation number is 4
This protein takes oxygen from hemoglobin in order to
O break down stored fats for energy.
O transport water-insoluble lipids in the bloodstream.
transport oxygen from the lungs to tissues around the body.
O store it for muscle cells.
Answer:
i'm pretty sure it's 'transport oxygen from the lungs to tissues around the body'
Answer:
Transportation of Oxygen from Lungs to Tissues
Describe at least 3 phases of thr water cycle and make sure to explain The state of matter of water at each of the phases
is smoke a compound or a mixture? explain your answer.
Explanation:
hope it is helpful to you ☺️
What are the different types of excretion?
Answer:
There are 4 excretory organs in human: The skin, the lungs, the liver, and the kidney (Urinary system). The skin excretes the sweat outside the body through numerous pores in the surface of this organ. Sweat is a mixture of three metabolic wastes: water, salts, and urea.
who is really good with chemistry and can help me with some questions/equations?
Answer:
I can help
Explanation:
What is the pH of a solution that has a [OH^-] of 1x10^-2?
2
12
9
8
In the chemical laboratory, why do scientists use a mortar and pestle?
A. To increase surface area of a solute
B. To decrease surface area of a solute
C. To increase temperature of a solute
D. To decrease temperature of a solute
Answer:
A. To increase surface area of a solute
Explanation:
What type of reaction occurs when energy is released?
Explain why crystallisation can't be used to prepare calcium carbonate.
Explanation:
The mechanisms by which amorphous intermediates transform into crystalline materials are poorly understood. Currently, attracting enormous interest is the crystallization of amorphous calcium carbonate, a key intermediary in synthetic, biological, and environmental systems. Here we attempt to unify many contrasting and contradictory studies by investigating this process in detail. We show that amorphous calcium carbonate can dehydrate before crystallizing, both in solution and in air, while thermal analyses and solid-state nuclear magnetic resonance measurements reveal that its water is present in distinct environments. Loss of the final water fraction—comprising less than 15% of the total—then triggers crystallization. The high activation energy of this step suggests that it occurs by partial dissolution/recrystallization, mediated by surface water, and the majority of the particle then crystallizes by a solid-state transformation. Such mechanisms are likely to be widespread in solid-state reactions and their characterization will facilitate greater control over these processes.
How many Oxygen atoms are in 2NA(OH)3
Answer:
3 oxygen atom
hope it helps.
Answer:
Explanation:
There are 3 oxygen atoms.
have a nice day!Can you choose me brainliest?
What is the state of matter involved in a solution and colloid
Explanation:
colloid is a mixture in which one substance of microscopically dispersed insoluble particles are suspended throughout another substance. However, some definitions specify that the particles must be dispersed in a liquid,[1] and others extend the definition to include substances like aerosols and gels. The term colloidal suspension refers unambiguously to the overall mixture (although a narrower sense of the word suspension is distinguished from colloids by larger particle size). A colloid has a dispersed phase (the suspended particles) and a continuous phase (the medium of suspension). The dispersed phase particles have a diameter of approximately 1 nanometre to 1 micrometre.[
hope it helps.
Answer:
colloids are mixtures in which one or more substances are dispersed as relatively large solid particles or liquid droplets throughout a solid ,liquid or gaseous medium .The particles of a colloid remain and do not settle due to gravity ,and they are often electrically charged
hope it helpedA cylinder is labeled \"PENTANE.\" When the gas inside the cylinder is monochlorinated, five isomers of formula C5H11Cl result. Was the gas pure n-pentane, pure isopentane, pure neopentane, or a mixture of two or all three of these?
Answer:
a mixture of two these
Explanation:
The number of isomeric monochlorides depends on the structure and number of equivalent hydrogen atoms in each isomer of pentane.
n-pentane has three different kinds of equivalent hydrogen atoms leading to three isomeric monochlorides formed.
Isopentane has four different types of equivalent hydrogen atoms hence four isomeric monochlorides are formed.
Lastly, neopentane has only one type of equivalent hydrogen atoms that yields one mono chlorination product.
Hence the cylinder must contain a mixture of isopentane and neopentane which yields four and one isomeric monochlorides giving a total of five identifiable monochloride products as stated in the question.
I'm like a highway system in your body. I carry necessary supplies to the parts of your body that need llen, allu
carry away wastes so your body can get rid of them. I contain blood vessels and am a system with a lot of heart.
What system am I?
1:digestive system
2:circulatory system
3: muscular system
4:skeletal system
plssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss sssssssssssssssssss sssssssssssssssssss sssssssssssssssssss sssssssssssssssssss answer this correctly
Answer:
The circulatory system
Explanation:
Hope this helps
What is the mass number and atomic number of Ca0
Answer:
56.0774g/mol
Explanation:
hope you like it ☺️
This refers to the most powerful means of communicating confidence and conviction A.Posture B.eye contact C.body movement
please
please
please
please
ples
please
please
please help me
Answer:
c
Explanation:
the way you move explains how confident you are
What effect does the Earth's surface have on solar radiation?
Answer:
Thus, the proportion of Earth's surface that is covered by ice and snow affects how much of the Sun's solar radiation is absorbed, warming the planet, or reflected. Therefore, snow and ice which are covered in soot from pollution no longer reflect sunlight, but absorb it and so melting increases.
Answer:
Half of the solar radiation is absorbed and converted to infrared (heat).
Explanation: