Answer:
-The other substances that give a positive test with AgNO3 are other chlorides present, iodides and bromide.
-It is reasonable to exclude iodides and bromides but it is not reasonable to exclude other chlorides
Explanation:
In the qualitative determination of halogen ions, silver nitrate solution(AgNO3) is usually used. Now, various halide ions will give various colours of precipitate when mixed with with silver nitrate. For example, chlorides(Cl-) normally yield a white precipitate, bromides(Br-) normally yield a cream precipitate while iodides (I-) normally yield a yellow precipitate. Thus, all these ions or some of them may be present in the system.
With that being said, if other chlorides are present, they will also yield a white precipitate just like KCl leading to a false positive test for KCl. However, since other halogen ions yield precipitates of different colours, they don't lead to a false test for KCl. Thus, we can exclude other halides from the tendency to give us a false positive test for KCl but not other chlorides.
what is the meaning of the word tetraquark?
Answer:
A tetraquark in physics is an exotic meson composed of four valence quarks.
Explanation:
It has been suspected to be allowed by quantum chromodynamics, the modern story of strong interactions.
Hope it helps.
what is the difference between acidic and basic protein
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10 genes.
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10
Explanation:
The ionization constant of lactic acid ch3ch(oh) co2h am acid found in the blood after strenuous exercise is 1.36×10^-4 If 20.0g of latic acid is used to make a solution with a volume of 1.00l what is the concentration of hydronium ion in the solution
Answer:
Explanation:
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
ionisation constant = 1.36 x 10⁻⁴ .
molecular weight of lactic acid = 90 g
moles of acid used = 20 / 90
= .2222
it is dissolved in one litre so molar concentration of lactic acid formed
C = .2222M
Let n be the fraction of moles ionised
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
C - nC nC nC
By definition of ionisation constant Ka
Ka = nC x nC / C - nC
= n²C ( neglecting n in the denominator )
n² x .2222 = 1.36 x 10⁻⁴
n = 2.47 x 10⁻²
nC = 2.47 x 10⁻² x .2222
= 5.5 x 10⁻³
So concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per litre .
The concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per liter .
Ionization of lactic acid can be represented as:
CH₃CHOHCOOH⇄ CH₃CHOHCOO⁻ + H⁺
Given:
ionization constant = 1.36 x 10⁻⁴
mass= 20.0 g
Now, Molecular weight of lactic acid = 90 g
[tex]\text{Number of moles}=\frac{20}{90} =0.22mol[/tex]
It is dissolved in 1.00L so molar concentration of lactic acid formed will be
C = 0.22M
Consider "n" to be the fraction of moles ionized
CH₃CHOHCOOH ⇄ CH₃CHOHCOO⁻ + H⁺
C - nC nC nC
By definition of ionization constant Ka
[tex]K_a =\frac{nC*nC}{C-nC}[/tex]
[tex]K_a= n^2C[/tex] ( neglecting n in the denominator )
On substituting the values we will get:
[tex]n^2 *0.22 = 1.36 *10^{-4}\\\\n = 2.47 * 10^{-2}[/tex]
To find the concentration of hydronium ion in the solution,
[tex]nC = 2.47 *10^{-2} *0.22\\\\nC= 5.5 * 10^{-3}[/tex]
So, concentration of hydrogen or hydronium ion = 5.5 x 10⁻³ g ion per liter.
Learn more:
brainly.com/question/19954349
Determine the cell notation for the redox reaction given below.
Sn(s) + 2H+(aq) ⟶ Sn2+(aq) + H2(g)
a. H+(aq) | H2(g) | Pt ∥ Sn(s) | Sn2+(aq)
b. H2(g) | H+(aq) | Pt ∥ Sn2+(aq) | Sn(s)
c. Sn2+(aq) | Sn(s) ∥ H2(g) | H+(aq) | Pt
d. Sn(s) | Sn2+(aq) ∥ H+(aq) | H2(g) | Pt
e. Sn(s) | H2(g) ∥ Sn2+(aq) | H+(aq) | Pt
Answer:
The correct answer is d. Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt
Explanation:
The half reactions are:
2H⁺(aq) + 2 e- ⟶ H₂(g) (reduction)
Sn(s) ⟶ Sn²⁺(aq) + 2 e- (oxidation)
In the cell notation, there are two electrodes in which are separated the reduction reaction from the oxidation reaction. In the left electrode occurs the oxidation reaction (anode) while in the right electrode occurs the reduction reaction (cathode). The general form of the cell notation is the following:
anode reaction∥ cathode reaction
where the two bars ( ∥ ) represent the physical barrier between the electrodes. A single bar ( | ) is used to represent a phase separation.
In this redox reaction, the half reaction of the anode is Sn(s) ⟶ Sn²⁺(aq) + 2 e-; whereas the half reaction of the cathode is 2H⁺(aq) + 2 e- ⟶ H₂(g).
The componens are written in order according to the half reaction. Since Sn²⁺ and H⁺ ions are in solution, a platinum electrode is used and represented as Pt. Thus, the cell notation is:
Sn(s) | Sn²⁺(aq) ∥ H⁺(aq) | H₂(g) | Pt
Air contains nitrogen, oxygen, argon, and trace gases. Ifthe partial pressure of nitrogen is 592 mm Hg, oxygen is160 mm Hg, argon is 7 mm Hg, and trace gas is 1 mm Hg,what is the atmospheric pressure
Answer:
760 mmHg
Explanation:
Step 1: Given data
Partial pressure of nitrogen (pN₂): 592 mmHgPartial pressure of oxygen (pO₂): 160 mmHgPartial pressure of argon (pAr): 7 mmHgPartial pressure of the trace gas (pt): 1 mmHgStep 2: Calculate the atmospheric pressure
Since air is a gaseous mixture, the atmospheric pressure is equal to the sum of the gases that compose it.
P = pN₂ + pO₂ + pAr + pt = 592 mmHg + 160 mmHg + 7 mmHg + 1 mmHg = 760 mmHg
Need help finding major products
Answer:
Explanation:
RX + AgNO₃ = R⁺ ( carbocation ) + AgX + NO₃⁻
C₂H₅OH ( a nucleophile ) + R⁺ = ROC₂H₅
C₅H₁₁X + AgNO₃ = C₅H₁₁⁺ + AgX + NO₃⁻
In the first case carbocation produced is CH₃CH₂CH₂CH₂CH₂⁺
CH₃CH₂CH₂CH₂CH₂⁺ ⇒ CH₃CH₂CH₂C⁺HCH₃ ( secondary carbocation more stable )
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
Hence option D is correct .
b )
In the second case carbocation produced is
CH₃CH₂CH₂CH⁺CH₃
CH₃CH₂CH₂C⁺HCH₃ + C₂H₅OH ⇒ CH₃CH₂CH₂CH(OC₂H₅)CH₃
The product formed is same as in case of first
Option B is correct
Identify a homogeneous catalyst:
a. SO2 over vanadium (V) oxide
b. H2SO4 with concentrated HCl
c. Pd in H2 gas
d. N2 and H2 catalyzed by Fe
e. Pt with methane
Answer:
b, H2SO4 with HCl, as they are both liquid acids
11. How did the solubility product constant Ksp of KHT in pure water compare to its solubility product constant Ksp of KHT in KCl solution? Are these results what you would expect? Why?
Answer:
Explanation:
KHT is a salt which ionises in water as follows
KHT ⇄ K⁺ + HT⁻
Solubility product Kw= [ K⁺ ] [ HT⁻ ]
product of concentration of K⁺ and HT⁻ in water
In KCl solution , the solubility product of KHT will be decreased .
In KCl solution , there is already presence of K⁺ ion in the solution . So
in the equation
[ K⁺ ] [ HT⁻ ] = constant
when K⁺ increases [ HT⁻ ] decreases . Hence less of KHT dissociates due to which its solubility decreases . It is called common ion effect . It is so because here the presence of common ion that is K⁺ in both salt to be dissolved and in solvent , results in decrease of solubility of the salt .
A chemist adds of a M barium chlorate solution to a reaction flask. Calculate the mass in grams of barium chlorate the chemist has added to the flask. Round your answer to significant digits.
The given question is incomplete, the complete question is:
A chemist adds 200.0 ml of a 0.52M barium chlorate (Ba(CIO3)2) solution to a reaction flask. Calculate the mass in grams of barium chlorate the chemist has added to the flask. Round your answer to significant digits.
Answer:
The correct answer is 32 grams.
Explanation:
Based on the given solution, the molarity of barium chlorate solution given is 0.52 M, this shows that the solution will comprise 0.52 moles in 1 L or 1000 ml of the solution.
Therefore, in 200 ml, it will comprise 0.52/1000 × 200 moles of Ba(ClO₃)₂,
= 0.52/1000 × 200 = 0.104 moles
The molecular mass of Ba(ClO₃)₂ is 304.23 gram per mole
So, the mass of Ba(ClO₃)₂ in 0.104 moles will be,
= 304.23 g/mol × 0.104
= 31.639 grams or 32 grams.
A chemistry student weighs out of formic acid into a volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with solution. Calculate the volume of solution the student will need to add to reach the equivalence point. Round your answer to significant digits.
The given question is incomplete, the complete question is:
A chemistry student weighs out 0.0349g of formic acid HCHO2 into a 250.mL volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1500M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits.
Answer:
The correct answer is 5.06 ml.
Explanation:
Based on the given information, the weight of formic acid given is 0.0349 grams. The volume of formic acid of V1 given is 250 ml. The molecular mass of formic acid is 46 grams per mole. Now the molarity of formic acid will be,
[HCOOH] = weight * 1000 / molecular mass * volume (ml)
= 0.0349 * 1000 / 46 * 250
= 0.003035 M or M1
The molarity of NaOH given is 0.1500 M or M2
Let us assume that the volume needed to attain equivalence point is V2 ml. The volume V2 can be determined by using the dilution equation,
M1V1 = M2V2
V2 = M1V1/M2
V2 = 0.003035 * 250 / 0.1500
V2 = 5.06 ml.
Hence, the volume of NaOH needed is 5.06 ml.
Why do you think sodium bicarbonate is included to neutralize an acidic spill rather than sodium hydroxide?
Imagine a hypothetical situation in which 250 mL of diethyl ether (SDS) has spilled inside of a chemical fume hood onto a stir plate that is plugged in and stirring. Discuss the risks associated with this situation (location, size, compound spilled, and external hazards), and then explain how this spill should be managed.
Answer:
Acid spills should be neutralized with sodium bicarbonate and then cleaned up with a paper towel or sponge.
Explanation:
A student mixes wants to prepare 24.1 mmol of benzamide from benzoyl chloride and NH4OH. If the student uses excess 15 M NH4OH, how many mL of Benzoyl chloride must be used
Answer:
2.81mL
Explanation:
Based on the reaction:
C₆H₃COCl + 2NH₃ → C₆H₅CONH₂ + NH₄Cl
Benzoyl chloride + ammonia → Benzamide
1 mole of benzoyl chloride in excess of ammonia produce 1 mole of Benzamide.
Thus, assuming a theoretical yield, to produce 24.1mmoles of benzamide you require 24.1mmoles of benzoyl chloride.
As molar mass of benzoyl chloride is 141g/mol, mg you require are:
mg Benzoyl chloride: 24.1mmol × (141mg / 1mmol) = 3398.1mg = 3.3981g of benzoyl chloride.
to convert this mass to mL, you require density of Benzoyl chloride (1.21g/mL). Thus, mL you need are:
3.3981g × (1mL / 1.21g) =
2.81mLA reaction is performed in a lab whereby two solutions are mixed together. The products are a liquid and a solid precipitate. What procedures would facilitate measurement of actual yield of the solid
Answer:
filtration, drying, and weighing
Explanation:
The procedures that would facilitate the measurement of the actual yield of the solid would be filtration of the precipitate, drying of the precipitate, and weighing of the precipitate respectively.
The liquid/solid mixture resulting from the reaction can be separated by the process of filtration using a filter paper. The residue in the filter paper would be the solid while the filtrate would be the liquid portion of the reaction's product.
The residue can then be allowed to dry, and then weighed using a laboratory-grade weighing balance. The weight of the solid represents the actual yield of the solid.
cetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce of water.
Answer:
0.60 mol
Explanation:
There is some info missing. I think this is the original question.
Acetylene gas is often used in welding torches because of the very high heat produced when it reacts with oxygen gas, producing carbon dioxide gas and water vapor. Calculate the moles of oxygen needed to produce 1.5 mol of water.
Step 1: Given data
Moles of water required: 1.5 mol
Step 2: Write the balanced equation
C₂H₂(g) + 2.5 O₂(g) ⇒ 2 CO₂(g) + H₂O(g)
Step 3: Calculate the moles of oxygen needed to produce 1.5 mol of water
The molar ratio of O₂ to H₂O is 2.5:1. The moles of oxygen needed to produce 1.5 mol of water are (1/2.5) × 1.5 mol = 0.60 mol
After the reaction between sodium borohydride and the ketone is complete, the reaction mixture is treated with water and H2SO4 to produce the desired alcohol. Explain the reaction by clearly indicating the source of the hydrogen atom that ends up on the oxygen
Answer:
The hydrogen can be gotten from the added Acid or water during "workup".
Explanation:
Basically we can say that the reaction describe in this question is a Reduction reaction because of the chemical compound called sodium borohydride. In the reaction described above we can see that there is a Reduction of ketone to alcohol by the compound; sodium borohydride.
For the reduction Reaction to occur the C-O bond must break so as to enable the formation of O-H bond and C-H bond.
So, "the reaction mixture is treated with water and H2SO4 to produce the desired alcohol", thus, the oxygen will definitely pick up the hydrogen from H2SO4 or H2O.
can I get some urgent help please?
Answer:
hi here goes your answer
Explanation:
iv. The lower the PH, the weaker the base
1. Suppose 1.00 g of NaOH is used to prepare 250 mL of an NaOH solution. Compare the expected molarity of this solution to the actual average molarity you measured in the standardization. What do you notice? 2. Do you think the results would have been more accurate if a different type of acid or base were used in the standardization? Why, or why not? 3. There are many different primary standards that could be used in a standardization titration. What are the criteria for a primary standard?
Answer:
See explanation
Explanation:
The calculated concentration of the sodium hydroxide is;
Number of moles= mass/molar mass = 1g/40gmol-1 = 0.025 moles
Concentration= number of moles/volume= 0.025×1000/250 = 0.1 M
This calculated concentration will be different from the molarity of NaOH obtained by standardization with acid. The result will not be more accurate if a different acid is used for the standardization this is because sodium hydroxide is deliquescent and absorbs moisture thereby leading to inaccuracy in the calculated molarity.
Any substance that must be used as a primary standard must not absorb moisture, it must be stable and it must be a substance in its pure form.
Limiting reagent problem. How many grams of H2O is produced from 40.0 g N2O4 and 25.0 g N2H4. N2O4 (l) + 2 N2H4 (l) → 3 N2 (g) + 4 H2O(g)
Answer:
28.13 g of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
N2O4(l) + 2N2H4 (l) → 3N2(g) + 4H2O(g)
Next, we shall determine the masses of N2O4 and N2H4 that reacted and the mass of H2O produced from the balanced equation.
This is illustrated below:
Molar mass of N2O4 = (14x2) + (16x4) = 92 g/mol
Mass of N2O4 from the balanced equation = 1 x 92 = 92g
Molar mass of N2H4 = (14x2) + (4x1) = 32 g/mol
Mass of N2H4 from the balanced equation = 2 x 32 = 64 g
Molar mass of H2O = (2x1) + 16 = 18 g/mol
Mass of H2O from the balanced equation = 4 x 18 = 72 g
Summary:
From the balanced equation above,
92 g of N2O4 reacted with 64 g of N2H4 to produce 72 g of H2O.
Next, we shall determine the limiting reactant.
This can be obtained as follow:
From the balanced equation above,
92 g of N2O4 reacted with 64 g of N2H4.
Therefore, 40 g of N2O4 will react with = (40 x 64)/92 = 27.83 g of N2H4.
From the calculations made above, we can see that it will take a higher mass i.e 27.83 g than what was given i.e 25 g of N2H4 to react completely with 40 g of N2O4.
Therefore, N2H4 is the limiting reactant and N2O4 is the excess reactant.
Finally, we shall determine the mass of H2O produced from the reaction of 40.0 g of N2O4 and 25.0 g of N2H4.
In this case the limiting reactant will be used because it will produce the maximum amount of H2O as all of it is consumed in the reaction.
The limiting reactant is N2H4 and the mass of H2O produced can be obtained as follow:
From the balanced equation above,
64 g of N2H4 reacted to produce 72 g of H2O.
Therefore, 25 g of N2H4 will react to produce = (25 x 72)/64 = 28.13 g of H2O.
Therefore, 28.13 g of H2O were obtained from the reaction.
When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are:
P2O5 (s) + H2O (l) =H3PO4 (aq)
The balanced chemical equation for the reaction between hydrogen sulfide and oxygen is:
2H2S(g) + 3O2(g) =2H2O(l) + 2SO2(g)
We can interpret this to mean:
3moles of oxygen and_______moles of hydrogen sulfide react to produce______moles of water and_______ moles of sulfur dioxide.
Answer:
1. The coefficients are: 1, 3, 2
2. From the balanced equation, we obtained the following:
3 moles oxygen, O2 reacted.
2 moles of Hydrogen sulfide, H2S reacted.
2 moles of water were produced.
2 moles of sulphur dioxide, SO2 were produced.
Explanation:
1. Determination of the coefficients of the equation.
This is illustrated below:
P2O5(s) + H2O(l) <==> H3PO4(aq)
There are 2 atoms of P on the left side and 1 atom on the right side. It can be balance by putting 2 in front of H3PO4 as shown below:
P2O5(s) + H2O(l) <==> 2H3PO4(aq)
There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by putting 3 in front of H2O as shown below:
P2O5(s) + 3H2O(l) <==> 2H3PO4(aq)
Now the equation is balanced.
The coefficients are: 1, 3, 2.
2. We'll begin by writing the balanced equation for the reaction. This is given below:
2H2S(g) + 3O2(g) => 2H2O(l) + 2SO2(g)
From the balanced equation above,
3 moles of oxygen, O2 reacted with 2 moles of Hydrogen sulfide, H2S to produce 2 moles of water, H2O and 2 moles of sulphur dioxide, SO2.
how salt solution can be determined by using hydrometer
Answer:
Salt solution may be calculated by measuring the specific gravity of a sample of water using a hydrometer.
Hope this answer correct (^^)....
A sample of neon gas at a pressure of 0.609 atm and a temperature of 25.0 °C, occupies a volume of 19.9 liters. If the gas is compressed at constant temperature to a
volume of 12.7 liters, the pressure of the gas sample will be
atm.
Answer:
The pressure of the gas sample will be 0.954 atm.
Explanation:
Boyle's law states that the pressure of a gas in a closed container is inversely proportional to the volume of the container, when the temperature is constant. That is, if the pressure increases, the volume decreases; conversely if the pressure decreases, the volume increases.
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
o P * V = k
To determine the change in pressure or volume during a transformation at constant temperature, the following is true:
P1 · V1 = P2 · V2
That is, the product between the initial pressure and the initial volume is equal to the product of the final pressure times the final volume.
In this case:
P1= 0.609 atmV1= 19.9 LP2=?V2= 12.7 LReplacing:
0.609 atm* 19.9 L= P2* 12.7 L
Solving:
[tex]P2=\frac{0.609 atm* 19.9 L}{12.7 L}[/tex]
P2= 0.954 atm
The pressure of the gas sample will be 0.954 atm.
Identify a process that is NOT reversible. A. melting of steel B. freezing water C. melting of ice D. frying an egg E. deposition of carbon dioxide (gas to solid)
A process that is not a reversible reaction is frying an egg.
What are reversible reactions?Reversible reactions are those reactions in which product will again change into the reactant.
Melting of steel and ice are reversible reaction as after cooling again we get the original state of steel and ice.Freezing of water is also reversible reaction as at normal temperature we get the original state of water.Deposition of carbon dioxide is also a reversible reaction.Frying an egg is a non reversible reaction as after frying an egg we didn't get the original egg again.Hence option (D) is correct.
To know more about reversible reaction, visit the below link:
https://brainly.com/question/1495850
Calculate the pH of a buffer solution obtained by dissolving 18.0 g of KH2PO4(s) and 35.0 g of Na2HPO4(s) in water and then diluting to 1.00 L.
Answer:
pH of the buffer is 7.48
Explanation:
The H₂PO₄⁻/HPO₄²⁻ buffer has a pKa of 7.21. You can find pH of this buffer following H-H equation:
pH = pKa + log [A⁻] / [HA]
pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]
Where [] represents molarity of each specie of the buffer and, as volume is 1.00L, also represents its moles.
Thus, to find pH of the buffer we need to calculate moles of each specie, thus
Moles of 18.0g of KH₂PO₄(Molar mass: 136.086g/mol) = moles of H₂PO₄⁻ are:
18.0g KH₂PO₄ ₓ (1mol / 136.086g) = 0.132 moles of KH₂PO₄= H₂PO₄⁻
Moles of 35.0g of Na₂HPO₄(Molar mass: 141.96g/mol) = moles of HPO₄²⁻ are:
35.0g Na₂HPO₄ ₓ (1mol / 141.96g) = 0.2465 moles of Na₂HPO₄= HPO₄²⁻
Replacing in H-H equation:
pH = 7.21 + log [HPO₄²⁻] / [ H₂PO₄⁻]
pH = 7.21 + log [0.2465] / [0.132]
pH = 7.48
pH of the buffer is 7.48
below are three reactions showing how chlorine from CFCs (chlorofluorocarbons) destroy ozone (O3) in the stratosphere. Ozone blocks harmful ultraviolet radiation from reaching earth’s surface. Show how these 3 equations sum to produce the net equation for the decomposition of two moles of ozone to make three moles of diatomic oxygen (2 O3→ 3 O2), and calculate the enthalpy change. (6 points) R1 O2 (g) → 2 O (g) ΔH1°= 449.2 kJ R2 O3 (g) + Cl (g) → O2 (g) + ClO (g) ΔH2° = -126 kJ R3 ClO (g) + O (g) → O2 (g) + Cl (g) ΔH3°= -268 kJ
Answer:
ΔH = -338.8kJ
Explanation:
it is possible to sum the enthalpy changes of some reactions to obtain the enthalpy change of the whole reaction (Hess's law).
Using the reactions:
R₁ O₂(g) → 2O(g) ΔH₁°= 449.2 kJ
R₂ O₃(g) + Cl(g) → O₂(g) + ClO(g) ΔH₂° = -126 kJ
R₃ ClO (g) + O (g) → O₂ (g) + Cl (g) ΔH₃°= -268 kJ
By the sum 2R₂ + 2R₃:
(2R₂ + 2R₃) = 2O(g) + 2O₃(g) → 4O₂(g)
ΔH = 2ₓ(-126kJ) + (2ₓ-268kJ) = -788kJ
Now, this reaction + R₁
2O₃(g) → 3O₂(g)
ΔH = -768kJ + 449.2kJ
ΔH = -338.8kJWhich resulted from the study of chemistry?
A) Alchemy to turn base metals into noble metals
B) The understanding of earth, air, fire, and water as the basic components of matter.
C) A supernatural, mystical view of the world.
D) Discovering the role of oxygen in combustion
What mass of Si, in grams, can be produced from the reaction below starting with 225 g SiCl4 and 101 g Mg? SiCl4 + Mg Si + MgCl2 Given: 1 mol SiCl4 = 169.8963 g SiCl4 1 mol Mg = 24.3050 g Mg 1 mol Si = 28.0855 g Si
Answer:
[tex]m_{Si}=37.2gSi[/tex]
Explanation:
Hello,
In this case, for the undergoing balanced chemical reaction:
[tex]SiCl_4 + 2Mg \rightarrow Si + 2MgCl_2[/tex]
We must first identify the limiting reactant given the 225 g of SiCl4 and 101 g of Mg. Thus, we compute the available moles of SiCl4:
[tex]n_{SiCl_4}=225gSiCl_4*\frac{1molSiCl_4}{169.8963gSiCl_4}=1.324molSiCl_4[/tex]
Next, by using the 1:2 mole ratio between SiCl4 and Mg, we compute the moles of SiCl4 consumed by 101 g of Mg:
[tex]n_{SiCl_4}^{consumed}=101gMg*\frac{1molMg}{24.3050gMg} *\frac{1molSiCl_4}{2molMg} =2.08molSiCl_4[/tex]
Thus, since less moles of SiCl4 are available, we can infer it is the limiting reactant whereas the Mg is in excess. In such a way, the produced grams of Si are computed considering the 1:1 molar ratio between SiCl4 and Si:
[tex]m_{Si}=1.324molSiCl_4*\frac{1molSi}{1molSiCl_4} *\frac{28.0855gSi}{1molSi} \\\\m_{Si}=37.2gSi[/tex]
Best regards.
How to do this
Q1 and Q2
Only want to know how to find molecular formula
Answer:
Question 1
A. Empirical formula is C8H8O3
B. Molecular formula is C8H8O3
Question 2.
A. Empirical formula is CH2
B. Molecular formula is C4H8
Explanation:
Question 1:
A. Determination of the empirical formula:
Carbon (C) = 63.2%
Hydrogen (H) = 5.26%
Oxygen (O) = 31.6%
Divide by their molar mass
C = 63.2/12 = 5.27
H = 5.26/1 = 5.26
O = 31.6/16 = 1.975
Divide by the smallest
C = 5.27/1.975 = 2.7
H = 5.26/1.975 = 2.7
O = 1.975/1.975 = 1
Multiply through by 3 to express in whole number
C = 2.7 x 3 = 8
H = 2.7 x 3 = 8
O = 1 x 3 = 3
Therefore, the empirical formula for the compound is C8H8O3
B. Determination of the molecular formula of the compound.
From Avogadro's hypothesis, 1 mole of any substance contains 6.02×10²³ molecules.
Now from the question given, we were told that 1 molecule of the compound has a mass of 2.53×10¯²² g.
Therefore, 6.02×10²³ molecules will have a mass of = 6.02×10²³ x 2.53×10¯²² = 152.306 g
Therefore, 1 mole of the compound = 152.306 g
The molecular formula of the compound can be obtained as follow:
[C8H8O3]n = 152.306
[(12x8) + (1x8) + (16x3)]n = 152.306
[(96 + 8 + 48 ]n = 152.306
152n = 152.306
Divide both side by 152
n = 152.306/152
n = 1
The molecular formula => [C8H8O3]n
=> [C8H8O3]1
=> C8H8O3
Question 2:
A. Determination of the empirical formula of the compound.
Mass sample of compound = 0.648 g
Carbon (C) = 0.556 g
Mass of Hydrogen (H) = mass sample of compound – mass of carbon
Mass of Hydrogen (H) = 0.648 – 0.556
Mass of Hydrogen (H) = 0.092 g
Thus, the empirical formula can be obtained as follow:
C = 0.556 g
H = 0.092 g
Divide by their molar mass
C = 0.556/12 = 0.046
H = 0.092/1 = 0.092
Divide by the smallest
C = 0.046/0.046 = 1
H = 0.092/0.046 = 2
Therefore, the empirical formula of the compound is CH2.
B. Determination of the molecular formula of the compound.
Mole of compound = 0.5 mole
Mass of compound = 28.5 g
Molar mass of compound =.?
Mole = mass /Molar mass
0.5 = 28.5/ Molar mass
Cross multiply
0.5 x molar mass = 28.5
Divide both side by 0.5
Molar mass = 28.5/0.5 = 57 g/mol
Thus, the molecular formula of compound can be obtained as follow:
[CH2]n = 57
[12 + (1x2)]n = 57
14n = 57
Divide both side by 14
n = 57/14
n = 4
Molecular formula => [CH2]n
=> [CH2]4
=> C4H8.
Calculate the maximum wavelength of light that will cause the photoelectric
effect for potassium. Potassium has work function 2.29 eV = 3.67 x 10-19 J.
Answer:
Explanation:
Work function of potassium = 2.29 eV = 3.67 X 10⁻¹⁹ J
So the minimum energy of photon must be equal to 3.67 X 10⁻¹⁹ J .
energy of photon of wavelength λ = hc / λ
where h = 6.67 x 10⁻³⁴
c = 3 x 10⁸
Putting the values in the equation above
6.67 x 10⁻³⁴ x 3 x 10⁸ / λ = 3.67 X 10⁻¹⁹
λ = 6.67 x 10⁻³⁴ x 3 x 10⁸ / 3.67 X 10⁻¹⁹
= 5.452 x 10⁻⁷
= 5452 x 10⁻¹⁰ m
= 5452 A .
Select the correct answer. A certain reaction has this form: aA bB. At a particular temperature and [A]0 = 2.00 x 10-2 Molar, concentration versus time data were collected for this reaction and a plot of ln[A]t versus time resulted in a straight line with a slope value of -2.97 x 10-2 min-1. What is the half-life of this reaction? A. 23.33 seconds B. 0.043 minutes C. 0.0043 seconds D. 23.33 minutes E. 1680 minutes
Answer:
[tex]\large \boxed{\text{D. 23.34 min}}[/tex]
Explanation:
1. Find the order of reaction
Use information from the graph to find the order.
If a plot of ln[A] vs time is linear, the reaction is first order and the slope = -k.
2. Find the half-life
[tex]k = \dfrac{\ln2}{ t_{\frac{1}{2}}}\\\\k = \text{-slope} = -(-2.97 \times 10^{-2} \text{ min}^{-1}) =2.97 \times 10^{-2} \text{ min}^{-1} \\ t_{\frac{1}{2}} =\dfrac{\ln 2}{k} = \dfrac{\ln 2}{2.97 \times 10^{-2}\text{ min}^{-1}} =\textbf{23.34 min}\\\\\text{The half-life is $\large \boxed{\textbf{23.34 min}}$}[/tex]
The half life of the reaction is 23.33 minutes.
We know that for a first order reaction;
ln[A]t = ln[A]o - kt
A plot of ln[A]t against time (t) will yield a straight line graph with a slope of -k.
From the question, the slope is -2.97 x 10-2 min-1.
So, -2.97 x 10-2 min-1 = - k
k = 2.97 x 10-2 min-1
The half life of a first order reaction is obtained from;
t1/2 = 0.693/k
t1/2 = 0.693/2.97 x 10-2 min-1
t1/2 = 23.33 minutes
Learn more: https://brainly.com/question/3902440
Which, if any, of the two molecular geometries is likely to be polar if the outer atoms are identical and there is a difference in electronegativity between the central atom and the outer atoms
Answer:
Polar molecules are not symmetrical
Explanation:
Even though the structures of the molecules involved were not shown in the question, but I will proceed to give a general explanation of the conditions that describe a polar molecule.
First of all, symmetrical molecules are non-polar and asymmetrical molecules are polar. This is the reason why CF4 will be a nonpolar molecule but H2O will be a polar molecule. Some symmetrical molecules may may posses polar bonds or dipoles but these dipoles eventually cancel out since the molecule is symmetrical in nature.
Summarily, if a molecule possess the same type of atoms attached to the central atom with some symmetry axes, like C3, C4 etc., we will end up with a non polar molecule but if we have a nonplanar molecule, then we will end up finding it to be polar.