IF THE VECTOR COMPONENTS OF VECTOR A ARE MULTIPLIED BY 9 THEN THE MAGNITUDE OF VECTOR A IS INCREASES BY A FACTOR OF .........

Answer:

T = C / R      t = time, C =constant of proportionality, R = rate

180 min = C / 400 gal/min      

C = 72000 gal      to empty tank

T = 72000 gal / 600 gal/min = 120 min = 2 hrs

Answer:

No work is done on the weight. :3

To solve this we must be knowing each and every concept related to work and its calculation. Therefore, 250J is the work done in joule by the rope on the weight.

Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.

When a force is applied, it is said to produce positive work if it has a proportion in the orientation of the movement of a site of application. Work done is positive when the direction of force acting on the object and displacement of the object both are in the same direction.  

Mathematically,    

Work= force ×displacement

force =20 N

displacement=2.00 m

displacement=2×3.14×2=12.5m

substituting all the given values in the above equation, we get

Work= 20 ×12.5

Work =250J

Therefore, 250J is the work done in joule by the rope on the weight.

To learn more about work, here:  

https://brainly.com/question/18094932

#SPJ5

Answer:

speed and acceleration

Explanation:

speed is a scalar quantity

acceleration is a vector quantity

[tex] \huge \bf༆ Answer ༄[/tex]

The given terms in the question are : -

We have been given the task to find out time (t)

The formula that can be used to find time is : -

[tex] \sf \: I = \dfrac{ Q}{t}{} [/tex]

Rearrange the formula,

[tex] \sf \: t = \dfrac { Q}{I }[/tex]

Solve for time (t)

[tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]

Answer:

The time to reach max height is    h = 1/2 g t^2  

The time to fall is the same as that for an equivalent rise

m g h = 1/2 m v^2       KE vs PE

Here:   (Vf - VI) / g = t = -9  / -9.8 = .92 s

The average distance between the two stars is 792 light years

Let the mass of the first star be [tex]m_1[/tex]

Let the mass of the second star be [tex]m_2[/tex]

The combined mass of the two stars, [tex]m_1+m_2=5.5[/tex] solar masses

The orbital period of the stars, P = 12 years

Average distance between the two stars, D = ?

The average distance between the two stars can be calculated using Kepler's equation

[tex]D=(m_1+m_2)P^2[/tex]

Substitute [tex]m_1+m_2=5.5[/tex] and P = 12 into the formula [tex]D=(m_1+m_2)P^2[/tex]

[tex]D=5.5(12^2)[/tex]

D = 5.5(144)

D = 792 light years

Learn more here: https://brainly.com/question/25490228

It will be

[tex] {m/s}^{2} [/tex]

I am just explaining with the units only, because you want to know the accurate unit.

[tex] \frac{m/s}{s} \\ = \frac{m}{s} \times \frac{1}{s} \\ = \frac{m}{s \times s} \\ = \frac{m}{ {s}^{2} } \\ = {m/s}^{2} [/tex]

Hope you understood.

Do comment if you have any query.

Answer:

combine them all

6 m

Explanation:

Answer:

A. longer days and more direst sunlight

Explanation:

In the Northern Hemisphere, June 21 has longer days and more direct sunlight than December 21, so option A is correct.

Essentially, it alludes to a person's half-divisions. The Earth can be split up into many equal divisions. Latitudinal or longitudinal divisions may be used. Based on a hypothetical equator line, it can be either the northern or Southern Hemisphere, and based on the prime meridian, it can be either the eastern or western hemisphere. When viewed from a latitudinal perspective, the Northern and Southern Hemispheres are essentially hemispheres of the Earth.

The Northern Hemisphere is the region of the Earth that lies above the equator, which is an imaginary line. This hemisphere includes anything that is above this 0° line. It is the half of the planet that has the most people on the planet and more land than water.

The summer solstice falls on June 21 in the Northern Hemisphere and the winter solstice falls on June 21 in the Southern Hemisphere. The solstices are reversed around December 21 and winter officially starts in the Northern Hemisphere.

Therefore, in the Northern Hemisphere, June 21 has longer days and more direct sunlight than December 21.

To know more about hemispheres:

https://brainly.com/question/26841745

#SPJ2

Answer:

facilitated diffusion

The number of heaters that can safely be operated in the circuit is 5 heaters.

From the question given above, the following data were obtained:

Power of heater = 300 W

Voltage (V) = 110 V

Current (I) = 15 A

Voltage (V) = 110 V

Current (I) = 15 A

P = IV

P = 15 × 110

Thus, the power that can be drawn from the circuit is 1650 W

Power of heater = 300 W

Power of Circuit = 1650 W

[tex]Number \: of \: heaters \: = \frac{power \: of \: circuit}{power \: of \: heater} \\ \\ = \frac{1650}{300} \\ \\ = 5.5[/tex]

From the calculation made above, the number of heaters that can be operated safely in the circuit is 5 heaters.

Learn more: https://brainly.com/question/14478862

Hi there!

We know that:

∑F = ma

If you tripled the net force and halved the mass:

3F = 1/2ma

Rearrange for 'a':

3F × 2 = ma

6F = ma

Thus, the new acceleration would be 6 times the original, or 36 m/s².

Answer:

D is the correct answer for this question.

Explanation:

I had done this already

The characteristics of the thermistors allow to design an experiment to analyze the dependence of resistance with temperature;

      1) We set up the circuit

      2) We look for the current of the circuit and we keep it fixed.

      3) We look for the thermistor resistances for each temperature.

      4) Plot Resistance versus Temperature.

A Thermitor is an element whose resistance changes with temperature, for example a platinum resistance.

An experiment that we can carry out to measure is to set up the attached circuit where we have:

Let's start by looking for the current in the circuit.

In thermistors, the resistance for room temperature is given, so if we measure the voltage across the fixed resistor, we can shrink the voltage across the thermistor.

           [tex]V_{source} = V_R + V_{therm} \\V_{therm} = V_{source} - V_R \\ i = \frac{V_{therm} }{R_{therm}}[/tex]

This current remains fixed, since the fixed resistance is greater than the resistance of the thermistor throughout the range.

Second step.

Now we can change the temperature that is measured in the thermometer, for each temperature the voltage in the fixed resistance is measured, the resistance in the thermistor is calculated.

        [tex]R_{therm} = \frac{V_{source} - V_R}{i}[/tex]  

Third step.

We end with a graph of resistance versus temperature of the curve obtained, it is possible to understand the behavior of the resistance of the thermistor with temperature.

In conclusion with the characteristics of thermistors we can design an experiment to analyze the dependence of resistance with temperature:

      1) We set up the circuit

      2) We look for the current of the circuit and we keep it fixed.

      3) We look for the thermistor resistances for each temperature.

      4) Plot Resistance versus Temperature.

Learn more about thermistors here:  brainly.com/question/15690488

Answer:

Your answer would be D :)

Explanation:

An object with a higher mass will always fall faster due to gravity acting upon it. 15 N is more massive than the 10 N object, so statement D is correct.

Answer:

p=I×B

Explanation:

If a current 'I' flows through a given element in your circuit, losing voltage 'V' in the process, then the power 'P' dissipated by that circuit element is the product of that current and voltage.

Answer:

here is your answer

1+1=2

2+2=4

4+4=8

Hi there!

We can begin by using the derived kinematic equation:

[tex]t = \sqrt{\frac{2h}{g}[/tex]

Plug in the given values and let g = 9.8 m/s²:

[tex]t = \sqrt{\frac{2(20)}{g}} = \boxed{2.02 s}[/tex]

Now, we can solve for its final velocity using the equation:

[tex]v_f = v_i + at[/tex]

It is dropped from rest, so vi = 0 m/s.

[tex]v_f = at[/tex]

[tex]v_f = 9.8(2.02) = \boxed{19.796 m/s}[/tex]

Answer:

a. The ball would reach the ground in approximately [tex]2.02\; \rm s[/tex].

b. The velocity of the ball right before landing would be approximately [tex]19.8\; \rm m\cdot s^{-1}[/tex].

(Assumptions: the ball was dropped with no initial velocity; air resistance on the ball is negligible; [tex]g = 9.81\; \rm m\cdot s^{-2}[/tex].)

Explanation:

Under these assumptions, the acceleration of this ball would be constantly [tex]a = g = 9.81\; \rm m\cdot s^{-2}[/tex] (same as the gravitational field strength) during the descent.

Displacement of the ball: [tex]x = 20.0\; \rm m[/tex].

Initial velocity of the ball: [tex]v_{0} = 0\; \rm m\cdot s^{-1}[/tex].

Let [tex]t[/tex] denote the duration of this descent.

The SUVAT equation [tex]x = (1/2)\, a\, t^{2} + v_{0}\, t[/tex] relates the known quantities [tex]a[/tex], [tex]x[/tex], and [tex]v_{0}[/tex] to the unknown [tex]t[/tex].

Substitute the known quantities into this equation and solve to find the value of [tex]t\![/tex]:

[tex]\displaystyle 20.0\; {\rm m} = \frac{1}{2}\times 9.81\; {\rm m\cdot s^{-2}} \times t^{2} + 0\; {\rm m \cdot s^{-1}} \times t[/tex].

[tex]\displaystyle 20.0\; {\rm m} = \frac{1}{2}\times 9.81\; {\rm m\cdot s^{-2}} \times t^{2}[/tex].

[tex]\displaystyle t^{2} = \frac{20.0\; \rm m}{(1/2) \times 9.81\; \rm m\cdot s^{-2}}[/tex].

Since [tex]t > 0[/tex]:

[tex]\begin{aligned}t &= \sqrt{\frac{20.0\; \rm m}{(1/2) \times 9.81\; \rm m\cdot s^{-2}}} \\ &\approx 2.01928\; \rm s\\ &\approx 2.02\; \rm s \\ & (\text{Rounded to 2 sig. fig.})\end{aligned}[/tex].

Since the acceleration of this ball is constant, the velocity of the ball right before landing would be:

[tex]\begin{aligned}v_{1} &= a\, t \\ &\approx 9.81\; \rm m\cdot s^{-2} \times 2.01928\; \rm s \\ &\approx 19.8\; \rm m \cdot s^{-1} \end{aligned}[/tex].

Answer:

Increase 9 times

Explanation:

From Rutherford  and Marsden scattering experiment, we can conclude that the particle shown in red will come straight back from the foil because it is deflected by the charge in the gold nucleus.

Rutherford proposed Planetary model atom, which visualized an atom to consists of a positively charged heavy core called the nucleus around which negatively charged electrons circle in orbits much as planets move round the sun

Thus, from Rutherford  and Marsden scattering experiment, we can conclude that the particle shown in red will come straight back from the foil because it is deflected by the charge in the gold nucleus.

Learn more here:https://brainly.com/question/24263685

the answer is reflected or u can say repelled

Answer:

Solar eclipses occur when the Moon passes between Earth and the Sun, leaving a moving region of shadow on Earth's surface. Lunar eclipses occur when Earth passes between the Sun and the Moon, casting a shadow on the Moon. This is an annular eclipse.

(credits to "britannica")

Explanation:

Hi there!

There are two torques acting on the system:

τ (Arthur) = RW = R(790N)

τ (Violet) = RW = 4(500N) = 2000N

∑τ = 0 = τ(Violet) - τ(Arthur)

Thus:

τ(Violet) = τ(Arthur)

2000 = 790R

R ≈ 2.53m

Answer:

Explanation:

The gravitational force = G * m1 * m2 / r^2

That means as the distance increases, r get's bigger and m1 and m2 don't change, the force decreases. Read that sentence carefully. In physics, it is very important to know what goes up and goes down means and especially why.

Answer:

well your substitution method is correct but make sure to double check the original formula

Answer: HP = Horse Power.

Explanation: it is the unit given to tell the motor's particular power and 1hp = 746 watts.

Answer:

Explanation:

The current is the same through components connected in series. If you want to measure the current in a component, the ammeter must be placed in series.

__

The voltage is the same at the terminals of components connected in parallel. If you want to measure the voltage across a component, the voltmeter must be connected across the component, that is, in parallel with it.

[tex]\huge \mathbb \pink{ANSWER:}[/tex]

To measure the current through and the voltage across a resistor in a circuit, you should place the ammeter in series with the resistor and the voltmeter in parallel with the resistor.

#CarryOnLearning

Answer:14

Explanation:cuz