Answer:
These clouds extend through the lower and mid-layers of the troposphere bringing rain to the surface below.
Explanation:
The bases of clouds in the middle level of the troposphere, given the prefix “alto,”
which five atoms tend to form double of triple bonds? explain why these atoms form double and triple bonds.
Answer:
The formation of double and triple bonds is not as widespread among the atoms of the periodic table as one might expect. At least one of the atoms involved in a multiple bond is almost always C, N, or O, and in most cases both atoms are members of this trio
Covalent bonding occurs when electrons are shared between atoms. Double and triple covalent bonds occur when four or six electrons are shared between two atoms, and they are indicated in Lewis structures by drawing two or three lines connecting one atom to another.
Explanation:
(1.) Once we confirm other planetary systems, what do you think the
next stage of exploration should be?
The next stage of exploration should be gathering information about the planetary system.
What is the next stage of exploration?Once we confirm other planetary systems, the next stage of exploration should be the use of instruments that helps us to collect information about that planetary objects so we can conclude that the next stage of exploration should be gathering information about the planetary system.
Learn more about exploration here: https://brainly.com/question/13335713
Compare the relative strength of the two forces A and B. Explain how you determined this comparison by identifying the forces.
The intermolecular forces present in B will be much stronger than the intermolecular forces present in A.
What are intermolecular forces?The term intermolecular forces has to do with the forces that hold molecules of a substance together in a particular state of matter. Now, we can see that B must contain dipole - dipole interaction while A has none of these.
It then follows that the intermolecular forces present in B will be much stronger than the intermolecular forces present in A.
Learn more about intermolecular forces: https://brainly.com/question/9007693
typical "lead" pencil is actually made from carbon. if the carbon in the pencil weighs 1.50 grams, the pencil has [atoms] atoms of carbon.
Determine the maximum amount of Fe that was produced during the experiment. Explain how you determined this amount
The number of moles of iron produced can be obtained by the use of stoichiometry.
What is stoichiometry?The term stoichiometry has to do with mass - mole or mass - volume relationships. Stoichiometric relationships could be used to determine the amount of substance.
Now the reaction equation as well as other details are not shown in this question hence a numerical anwer can not be provided. As such, we can know that the balanced reaction equation can always be used to obtain the amount of iron by stoichiometry.
Learn more about stoichiometry: https://brainly.com/question/9743981
Draw the structures of the aldol addition and condensation products of cyclopentanone
The term aldol condensation has to do with a reation in which a nucleophile attacks the carbonyl group of an aldehyde.
What is alodol condensation?The term aldol condensation has to do with a reation in which a nucleophile attacks the carbonyl group of an aldehyde or a ketone to convert it to the enolate from which attacks another aldehyde or ketone at the carbonyl carbon to form the required product.
The structure of the organic product from the aldol condensation involving cyclopentanone is shown in the image attached to this answer.
Learn more about aldol condensation: https://brainly.com/question/9415260?:
The distance between a carbon atom and an oxygen atom in the co molecule is how far from the carbon atom is the center of mass of the molecule?
Answer:
1.12x10-10 or 0.63 ewan
Explanation:
Correct option is C)
The distance of centre of mass from carbon atom is,
xcm=m1+m2m1x1+m2x2
=12+1612×0+16×1.1
=0.63A˚
Thus, the centre of mass is 0.63A˚ from carbon atom.
The distance between a carbon atom and an oxygen atom in the co molecule is 0.63
What is the distance?Distance is the measurement of the farness of two objects from each other.
The distance between the molecules can be calculated by the given formula
[tex]xcm = m_1+m_2m_1\times 1+m_2 \times 2[/tex]
Putting the values in the equation
[tex]xcm = 12+1612 \times 0+16 \times 1.1 = 0.63 A^\circ[/tex]
Thus, the distance between a carbon atom and an oxygen atom in the co molecule is 0.63
Learn more about distance
https://brainly.com/question/15172156
#SPJ4
The aldol condensation involves nucleophilic attack of an enolate to a carbonyl. Use the pop-up menus to identify the total number of aldol products that each of the following reactions can produce
Aldol condensation involves the reaction of an acid or base with a carbonyl group producing a nucleophile that attacks another carbonyl compound to yield a β-hydroxyaldehyde or β-hydroxyketone compound.
What is aldol condensation?The aldol condensation is a reaction in organic chemistry in which there is a reaction between an acid or base and a carbonyl group which then serves as the nucleophile that attcks a second carbonyl to yield a β-hydroxyaldehyde or β-hydroxyketone compound.
The aldol condensation may be acid catalysed or base catlysed. The question is incomplete hence the complete mechanimsms can not be decuced.
Learn more about aldol condensation: https://brainly.com/question/9415260
word equation for water
Answer:
The actual reaction to make water is a bit more complicated: 2H2 + O2 = 2H2O + Energy. In English, the equation says: To produce two molecules of water (H2O), two molecules of diatomic hydrogen (H2) must be combined with one molecule of diatomic oxygen (O2). Energy will be released in the process.
Explanation:
How many atoms are there in 12 moles of sulfur
Cyanide and water react in a proton transfer reaction to form hydrogen cyanide and hydroxide
The proton transfer reaction between Cyanide and water can be written as; X^- + H2O -----> HX + OH^-
What is a proton transfer reaction?A proton transfer reaction is one in which a proton is moved from one chemical specie to another.It is in fact and acid - base reaction in the Brownstead - Lowry sense.
The proton transfer reaction between Cyanide and water can be written as(Let the cyanide ion be shown as X);
X^- + H2O -----> HX + OH^-
Learn more about proton transfer: https://brainly.com/question/861100?
The proton transfer reaction to form hydrogen cyanide and hydroxide is
X⁻ + H₂O → HX + OH⁻
What is a proton transfer reaction?A reaction in which a proton H⁻ is removed from one species and accepted by another species.
An example of a proton transfer is Brønsted acid reacting with a Brønsted base.
Thus, the proton transfer reaction to form hydrogen cyanide and hydroxide is X⁻ + H₂O → HX + OH⁻
Learn more about proton transfer
https://brainly.com/question/861100
#SPJ4
HELP
Determine the empirical formula of a compound containing 48.38
grams of carbon, 6.74 grams of hydrogen, and 53.5 grams of oxygen.
In an experiment, the molar mass of the compound was determined to be 180.15 g/mol.
What is the molecular formula of the compound?
For both questions, show your work or explain how you determined the formulas by
giving specific values used in calculations.
Answer:
I recently answered this question. The response I submitted is included below. I beleive my answer should be correct.
Explanation:
Question 1:
C: 48.38g(1mol/12g) = 4.0317
H: 8.12g(1mol/1.01g) = 8.12
O: 53.5g(1mol/16g) = 3.34375
Divide by the smallest amount (3.34375)
C = 4.0317/3.34375 = 1.206 = 1
H = 8.12/3.34375 = 2.42 = 2
O = 3.34375/3.34375 = 1
Empirical formula = CH2O
Question 2:
Molecular formula = n(empirical formula)
n = molar mass (compound)/molar mass (empirical)
Empirical formula: CH2O
Molar mass of CH2O = 12 + 2x1 + 16 = 30 g/mol
Molar mass of compound: 180.15 g/mol
[tex]n = \frac{180.15g/mol}{30g/mol} = 6[/tex]
Molecular formula = C6H12O6
my teacher hasnt graded yet, but i got the same answer as the guy above. i did my best to explain the process for y'all if you genuinely don't understand/know how to do it. THE PROCESS IS VERY LONG, but youll get it eventually if i didnt help lol GOODLUCK
and yes, the molecular formula is C6H12O6
Answer this question
Answer:
1.312788 atm
Explanation:
An unknown gas with a mass of 205 g occupies a volume of 20.0 L at 273 K and 1.00 atm. What is the molar mass of this compound?
The molar mass of this compound is 0.004 m/g
Firstly, molar mass is moles/grams so we need to solve for the number of moles and we were already given the grams (205 g).
So to solve for moles we were given 205 g, 20.0 L, 273 K and 1.00 atm. Knowing these numbers we can plug them into the ideal gas law, PV=nRT
where P is pressure, V is volume, n is number of moles, R is the gas constant (in this case it is 0.08206) and T is the temperature.
[tex]PV=nRT\\\\n=\frac{PV}{RT}\\\\n=\frac{1.00*20.0}{0.08206*273} =0.893[/tex]
Next, we use moles and grams to solve for molar mass:
[tex]\frac{0.893}{205} =0.004[/tex]
When the carbonator adds CO 2 to the solution, a ________ is added to the reaction, which pushes the reaction in the
________ direction.
a. product, forward
b. product, reverse
c. reactant, forward
d. reactant, reverse
(CO2 is added to H2CO3)
When the product is added to the solution, it will shift the reaction forward.
What is Carbonation?Carbonation is a form of chemical reaction in which carbon dioxide is added to a solution to give carbonates, bicarbonates, and carbonic acid. In chemistry, the term is used in place of carboxylation to form carboxylic acids
When a product is added to a system, the equilibrium will shift to the left, so as to produce more reactants but if the reactants is remove from the system, equilibrium will also be shifted to the left.
Therefore, When the product is added to the solution, it will shift the reaction forward.
Learn more about carbonation here.
https://brainly.com/question/24848856
3. What is the hydrogen ion concentration of a solution with a pH of 2.0?
Answer:
[H+] = 10^-2
Explanation:
pH = -log[H+]
2 = -log[H+]
[H+] = 10^-2
if there are 0.0023 moles of water in a sample, how many molecules are there?
39 g H
2
O
contains
1.3
×
10
24
molecules H
2
O
.
Explanation:
One mole of water has a molar mass of
18.015 g/mol
and
6.022
×
10
23
molecules H
2
O
. Therefore,
1 mol H
2
O
=
18.015 g H
2
O
=
6.022
×
10
23
molecules H
2
1O
Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.
39
g H
2
O
×
1
mol H
2
O
18.015
g H
2
O
×
6.022
×
10
23
molecules H
2
O
1
mol H
2
O
=
1.3
×
10
24
molecules H
2
O
39 g H
2
O
contains
1.3
×
10
24
molecules H
2
O
.
Explanation:
One mole of water has a molar mass of
18.015 g/mol
and
6.022
×
10
23
molecules H
2
O
. Therefore,
1 mol H
2
O
=
18.015 g H
2
O
=
6.022
×
10
23
molecules H
2
1O
Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.
39
g H
2
O
×
1
mol H
2
O
18.015
g H
2
O
×
6.022
×
10
23
molecules H
2
O
1
mol H
2
O
=
1.3
×
10
24
molecules H
2
O
39 g H
2
O
contains
1.3
×
10
24
molecules H
2
O
.
Explanation:
One mole of water has a molar mass of
18.015 g/mol
and
6.022
×
10
23
molecules H
2
O
. Therefore,
1 mol H
2
O
=
18.015 g H
2
O
=
6.022
×
10
23
molecules H
2
1O
Multiply the given mass of water times the conversion factors that cancel grams and moles of water, leaving molecules of water, as demonstrated below.
39
g H
2
O
×
1
mol H
2
O
18.015
g H
2
O
×
6.022
×
10
23
molecules H
2
O
1
mol H
2
O
=
1.3
×
10
24
molecules H
2
O
hello people ~
Which one of the following is a thermosetting plastic?
A. PET
B. Acrylic
C. Melamine
D. Polylactide
Answer:
Answer: C
Melamine resin or melamine formaldehyde (also shortened to melamine) is a resin with melamine rings terminated with multiple hydroxyl groups derived from formaldehyde. This thermosetting plastic material is made from melamine and formaldehyde.
Melamine formaldehyde is a thermosetting plastic (or thermoset) that strengthens as it is heated during its preparation.
help me please this'll cost me half of my grade
The map shows four bodies of water. The graph shows the area of these bodies of water.
Question 1. Identify the units that should be used for the area of these bodies of water.
Question 2. Use the map to identify which body of water (A, B, C, or D) matches bar 3, and explain your answer.
Question 3. Explain what type of water(fresh or salt) is most likely in these bodies of water.
I'll put a picture of the map and the graph
Answer:
...
Explanation:
Explanation:
BECAUSE I DONT KNOW AS WELL CAN SOME ONE HELP.
A world with both liquid water on its surface and carbon dioxide in its atmosphere is unstable because.
find the oxidation state of c in (NH4)2 CO3
Answer:
Ammonium carbonate is a neutral molecule. Charge on NH4 is +1 , so on (NH4)2 is +2 ( +1 * 2) ,lets take the charge on C to be x and O is -2 , so on O3 is -6 (3*-2). Therefore x= + 4. Hope it helps.
Explanation:
The number of protons and neutrons in an atom is that atoms __ number.
100 points
In an equilibrium expression, the concentrations of ___ are on top.
A:products B:solids C:reactants D:liquids
Answer:
products, it's answer A.
Answer:
products
Explanation:
A colloid in which a liquid is dispersed in a solid is called a(n)
Answer:
GEL
Explanation:
A colloid is a type of mixture that consists of insoluble particles in another substance. Liquid dispersed in a colloidal solid is called a gel.
What is gel?A gel is the dispersion of liquid molecules in a solid medium. It is a type of mixture that includes the suspension of particles in another substance. They are colloid that behaves like solid.
The liquid molecules of the medium become thick and viscous in the solid particles and form aggregates of the particles.
Therefore, colloid in which liquid is dispersed in solid is gel.
Learn more about colloid and gels here:
https://brainly.com/question/11640006
#SPJ4
In an exothermic reaction, which condition will be true?
A.) Activation energy will be less than the energy of the reactants.
B.) Activation energy minus energy of the products will be greater than activation energy minus energy of reactants.
C.) Activation energy minus energy of the products will be less than activation energy minus energy of reactants.
D.) Activation energy will be less than the energy of the products.
Activation energy will be less than the energy of the products in an exothermic reaction. Therefore, option (D) is correct.
What is exothermic reaction?In this type of reaction, the energy of the products is lower than the energy of the reactants. As a result, the difference in energy is released as heat or light, which can be detected by measuring the temperature or observing the light emitted during the reaction.
Exothermic reactions occur spontaneously, meaning they do not require an external energy source to start the reaction. Common examples of exothermic reactions include combustion, oxidation, and neutralization. These reactions often involve the formation of stronger bonds between atoms or molecules, which releases energy in the form of heat or light.
Exothermic reactions play an important role in many natural and industrial processes, including respiration, photosynthesis, and the production of electricity in power plants.
Learn more about exothermic reaction, here:
https://brainly.com/question/10373907
#SPJ2
Draw n‑ethyl‑3‑methylpentanamide. Include all hydrogen atoms
The structure of the compound n‑ethyl‑3‑methylpentanamide is attached to this answer.
What is IUPAC nomenclature?The IUPAC nomenclature was given in order for us to be able to draw the structure of a compound from its name. This is the generally accepted means of naming compounds globally.
The structure of the compound n‑ethyl‑3‑methylpentanamide in which all the hydrogen attched are shown attached to this answer.
Learn more about IUPAC nomenclature: https://brainly.com/question/2094768
The structure of n‑ethyl‑3‑methylpentanamide. Include all hydrogen atoms are attached. Its chemical formula is C₈H₁₇NO.
What is n‑ethyl‑3‑methylpentanamide?N-ethyl-3-methylpentanamide has a five-carbon parent chain attached to an amide functional group in its structural formula.
An amide's N-atom also has an ethyl substituent. At the C-3 position of the parent chain, a methyl group is substituted.
Thus, the of n‑ethyl‑3‑methylpentanamide. Include all hydrogen atoms are attached. Its chemical formula is C₈H₁₇NO.
Learn more about n‑ethyl‑3‑methylpentanamide
https://brainly.com/question/9360783
#SPJ4
Two substances are combined and react. After 10 minutes, the chemical reaction has reached equilibrium. Which values would be equal to zero for the solution?
The extra conversion of concentration of reactant and product should be zero in order to attaining equlibrium state.
What is equilibrium?Chemical equilibrium refers to the state in which both the reactants and products are present in equal concentrations or amount. In equlibrium, same amount of reactant is converted into product and product into reactant.
So we can conclude that the extra conversion of concentration of reactant and product should be zero in order to attaining equlibrium state.
Learn more about equilibrium here: https://brainly.com/question/517289
hello people ~
Modern non-stick cookware and the flat end of an electric iron has a coating of a polymer. Identify the name of the polymer.
A. PVC
B. Rayon
C. Teflon
D. Polyester
Answer:
Teflon
Explanation:
Teflon is a very good polymerIt is known for its nonstick behavior .So it's used in cookwares to cook food and in irons also
A glass container was initially charged with 1.95 moles of a gas sample at 3.75 atm and 21.7 °C. Some of the gas was released as the temperature was increased to 28.1 °C, so the final pressure in the container was reduced to 0.998 atm. What quantity in moles of the gas sample are present at the end?
Answer:
45830.4 moles
Explanation:
Ideal gas law is the hypothetical equation in which the pressure, volume, and temperature of the gas are directly related. It can be denoted as:
PV = nRT
The ideal gas law is:
PV = nRT
where,
P = Pressure
V = Volume
R = Gas constant
T =Temperature
n = moles
Given:
Moles in container = 1.95
Temperture = 294.85 K
Pressure = 3.75 atm
Volume =?
Substituting the values:
V = nRT/P
V = 1.95 × 0.082 × 294 / 3.75
Volume = 12.5 L
Now, the condition when changed, such that temperature is 301.25 K, pressure is 0.998 atm, and Volume is 12.5 L, then moles will be equal to:
PV/RT = n
0.998 × 12.5 / 0.082 × 301.25 = n
n = 45830.4 moles
Therefore, 0.521 moles is still present in the container.
To know more about ideal gas law, refer to the following link:
brainly.com/question/12124605
What happens to water when it freezes?
a) it expands.
b) it forms vapor
c) its density increases.
d) its composition changes
Answer:
it expands
Explanation:
Answer:
a) it expands.
Explanation:
Water is more dense when it is a liquid, and less dense as a solid. This is why ice floats above water.
Hence, Ice expands when it freezes.