Taking correct body measurements is of key importance especially to models and future models. So that they remember about the leftover weight in their body from thanksgiving , now when they take correct body measurements , they are aware and will counter such things to be better.
An Administrator wants to make a list of all prospects who complete the Contact Us form but only wants them to be added the first time they complete the form. If a prospect is ever removed from the list, they shouldn't be able to get added back to it. What is the best way to create this type of list
Answer:
The answer to this question can be defined as follows:
Explanation:
The easiest way to build such a list is by using an algorithm rule, where the prospects who complete the form are then matched with the rule and added to the list because the developer would also like to list of the all applicants, who fill out all the contact us Application, but still only prefer to also have them added when they fill-up the form first. When an outlook is ever omitted from the list, it should not be included.
What is a path and how do you know that it is filled and selected
Explanation:
A path represents a selected editing area of an image, this feature is typically available when using Adobe Photoshop software.
For example, a photographer may select the entire face area of his subject as his path (work path). To know when it is filled the photographer observes to see when the colour changes or other changes are applied to the background layer of the selected path.
Suppose you have a tablet with a capacity of gigabytes. For a plain text book, one byte typically corresponds to one character and an average page consists of 2000 characters. Assume all gigabytes are used for plain text books. a. How many pages of text can the tablet hold? b. How many 500-page books can the tablet hold?
Answer:
a. 17,500,000 pages
b. 35,000
Explanation:
The computation is shown below:
As we know that
[tex]1 giga\ bytes = 1 \times 10 ^ {9} bytes[/tex]
So for 35 gigabytes it would be
[tex]= 35 \times 10 ^ {9} bytes[/tex]
And it is given that there is 2,000 characters
a. So the number of text pages would be
Let us assume that
for 2,000 it would be 1 page
So for [tex]35 \times 10 ^ {9} bytes[/tex] it would be x
Now we solve the x which is equal to
[tex]= \frac {35 \times 10 ^ {9} bytes}{2,000}[/tex]
= 17,500,000 pages
b. Now for 500 pages, it would be
[tex]= \frac{17,500,000}{500}[/tex]
= 35,000
One technique to find the "things" that need to be included in the new system begins by starting with a user and the use cases and then try to identify the necessary informational "things." This technique is called the _______. a. check list technique b. domain analysis technique c. noun technique d. brainstorming technique
Answer:
Coding is a skill where you take instructions (the steps in a task) and translate it into a languaage.
Explanation:
Coding is a skill where you take instructions (the steps in a task) and translate it into a language the computer understands since computers do not communicate like humans. They communicate in a language called BINARY and
What is the port representing buy above symbol?
Answer:The port representing buy above symbol used in thousands used symbols by computer represent a today.
Explanation:The computer symbol is used to representing a today function,company, warning,specification.Symbol is used to the computer and electronics with each description.
Most symbols are shown below not may match your hardware device and software program.There are many types of symbol :
(1)Keyboard symbol (2)Display symbol (3)Power symbols (4)Sound symbols
(5)E-mail symbol (6)General symbol (7) Drive symbol (8) Network symbol
Symbol is the most commonly full circle and vertical at the top the power.
Write a function, sublist, that takes in a list of numbers as the parameter. In the function, use a while loop to return a sublist of the input list. The sublist should contain the same values of the original list up until it reaches the number 5 (it should not contain the number 5).
Answer:
Following are the code to this question:
def sublist(l):#defining a method list sublist that accepts a list
val=[]#defining an empty list
x=0#defining x variable that store value 0
while(x<len(l)):#defining loop that check x is lessthen list length
if(l[x]==5):#defining if block that checks list value equal to 5
break#using break keyword
val.append(l[x])#add value in val list
x+= 1#increment the value of x variable by 1
return val#return val
l=[3,4,7,8,5,3,2]#defining list l
print(sublist(l))#using print method to call sublist method
Output:
[3, 4, 7, 8]
Explanation:
In the above python code, a method "sublist" is declared that accepts a list, inside the method an empty list "val" and an integer variable x is defined that stores "0" value. In the method, a while loop is declared that checks list length and define if block to checklist element value equal to "5". which the condition is true it will return before values. In the last step, a list "l" is declared that holds value and used the print method to call sublist to prints its return value.Case-Based Critical Thinking
Ryan is creating a website for an automobile company. He wants to include media files on the web page and make the page appealing to the viewers. 43. Ryan wants a particular embedded media clip to automatically restart when it has finished playing. Which of the following HTML audio and video element attributes must Ryan include in his code to accomplish this?
a. src.
b. loop.
c. controls.
s. preload.
Answer:
B. Loop
Explanation:
The use of loop which is a boolean attribute in HTML is an instruction that specifies a replay of the video once it has ended. It is inputted in this format;
<video controls loop>
<source src="dance.mp4" type=video/mp4">
</video>
To add a video to the HTML web page, the <iframe> element is used. the source would also indicate the video URL. The specification of the dimensions, that is the height and width of the video are also written. The code is now closed with the </iframe> element.
Given the variable ip, already declared as a pointer to an integer, write the code to dynamically allocate memory for a single integer value, assign the resulting pointer to ip, and initialize the integer value to 27.
Answer:
In C++:
int *ip;
ip = new int;
*ip = 27;
Explanation:
First of all, let us have a look at the methods of memory allocation to a variable.
1. Compile Time: The memory gets allocated to the variable at the time of compilation of code only. It is also called static allocation of memory.
Code example:
int a = 5;
2. Run Time: The memory is allocated to the variable on the fly i.e. during the execution of the program. It is also called dynamic allocation of memory.
Now, we have to write code for a variable ip, which is an integer pointer to dynamically allocate memory for a single integer value and then initialize the integer value 27 to it.
Initializing a variable means assigning a value to variable for the first time.
Writing the code in C++ programming language:
int *ip; // Declaring the variable ip as a pointer to an integer
ip = new int; // Dynamically allocating memory for a single integer value
*ip = 27; // Initializing the integer value to 27.
A user reports that he cleared a paper jam and now cannot print. The technician reseats the paper and then prints a test page from the printer. A test page sent from the workstation does not print. Which of the following actions should the technician take first?
a. Check the printer connection
b. Stop and start the printer
c. Reboot the computer
d. Clear the print queue
Answer:
d. Clear the print queue.
Explanation:
If a user reports that he cleared a paper jam and now cannot print. Also, the technician reseats the paper and then prints a test page from the printer. A test page sent from the workstation does not print. The first and most appropriate action the technician should take is to clear the print queue.
In computer technology, a printer is an electronic output device (peripheral) that is used for the printing of paper documents (texts and images).
The print queue is the directory or location where the printing sequence for a printer is stored or backed up. If it was ensured that the power cord of the printer is properly plugged in, the paper jam is cleared and the papers are properly seated, then the next action to take is clearing the printing queue. Once, the printing queue is cleared and becomes empty, the printer will begin to print.
To see the non-printing characters in Writer press ________ + ________keys, together.
Answer:
Ctrl + *
Explanation:
Non-printing characters are the characters that are not displayed at the time of printing of an document or a spreadsheet. This is used for designing a content
The few are examples like non-breaking space, the pilcrow etc
The shortcut to show or hide the non-printing characters is Ctrl + * i.e Contorl + Star
So press these two keys we can see the non-printing characters
Answer:
Ctrl+F10, is the keys to see the non printing characters in Open Office Writer
Explanation:
why is know app downloading in my android phone even if I have 900 MB ???
Answer:
May be you have not signed in with Google
Your program will read in an existing text file. You want the program to terminate if the file does not exist. Which of the following indicates the correct code for the main method header? public static void main(String[] args) throws FileNotFoundException public static void main(String[] args) throws UnknownFileException public static void main(String[] args) public static void main(String[] args) throws FileMissingException
Answer:
FileNotFoundException
Explanation:
what should i do after learning python? how can I make apps or gaming apps? IF YOUR ANSWER WILL BE GOOD I WILL MARK AS BRAINLIEST
Answer:
Here are some of the things that you can do after learning Python:
Learn a Web Development Framework
Learn Machine Learning
Start Teaching Python to Beginners (and earn some bucks)
These are the top three ways to proceed
Explanation:
Using a material on the internet for your assignment without acknowledging the source is known as A. Plagiarism B. Piracy C. Ethical D. Copyright
Answer:
A. Plagiarism
Explanation:
Plagiarism is simply the act of representing an author's thoughts , ideas , expression , writings as one's own.
RSA is a public-key cryptosystem developed by MIT professors Ronald L. Rivest, Adi Shamir, and Leonard M. Adleman in 1977 in an effort to help ensure Internet security. RSA uses modular arithmetic and elementary number theory to do computations using two very large prime numbers. Identify the statement which is true for RC6 algorithm:________.
a) Is a variable key-size stream cipher with byte-oriented operations and is based on the use of a random permutation
b) Includes integer multiplication and the use of four 4-bit working registers
c) Is a parameterized algorithm with a variable block size, key size, and a variable number of rounds
d) Is a 64 bit block cipher that uses a key length that can vary between 32 and 448 bits
Do you know best way to know WiFi password which you are connected to?
Answer:
Download a wifi password saver on playstore or appstore
Explanation:
Answer:
Ask the person who set up the wifi router.
Look behind the wifi box and there should be a small sticker that says the password.
Call the wifi provider and say you forgot your wifi password
Reset your password using your account.
CO! Oher...9
pressure
14.
large
The barometric height in a town is 65cmHg. Given that the standard atmospheric pressure
is 76cmHg and density of mercury is 13600kg/m", determine the altitude of the town. (Density of
(3mks)
air is 1.25kg/mº).
Answer:
Altitude of the town(h1) = 1,196.8 m
Explanation:
Given:
Height of barometer(h) = 65 cm Hg = 0.65
Standard atmospheric pressure = 76 cm Hg = 0.76
Density of mercury(Pm) = 13,600 kg/m³
Density of air (Pa) = 1.25 kg/m³
Find:
Altitude of the town(h1)
Computation:
Pressure due column = Δp mercury column
(Pa)(h1) = (Pm)(h)
(1.25)(h1) = (13,600)(0.76-0.65)
(1.25)(h1) = 1,496
Altitude of the town(h1) = 1,196.8 m
The GaVS resource where students can locate information regarding Canvas, student email, registration and O365 is called the: Student Success Site Media Center dashboard Guidance Center
I Inferred you are referring to the Georgia Virtual School resource program.
Answer:
Guidance Center
Explanation:
Interestingly, the Georgia Virtual School (GaVS) enables students access to Virtual education.
Their resource platform allows students to find information regarding Canvas, student email, registration and Office 365 etc by simply going Guidance Center.
What are the flowchart symbols?
Answer:Flowchart use to represent different types of action and steps in the process.These are known as flowchart symbol.
Explanation:The flowchart symbols are lines and arrows show the step and relations, these are known as flowchart symbol.
Diamond shape: This types of flow chart symbols represent a decision.
Rectangle shape:This types of flow chart symbols represent a process.
Start/End : it represent that start or end point.
Arrows: it represent that representative shapes.
Input/output: it represent that input or output.
Sniffer turns the NIC of a system to the promiscuous mode so that it listens to all the data transmitted on its segment. It can constantly read all information entering the computer through the NIC by decoding the information encapsulated in the data packet. Passive sniffing is one of the types of sniffing. Passive sniffing refers to:
Answer:
The right answer will be "Sniffing through a hub".
Explanation:
Packet sniffer seems to be a device that listens for transmitted data on what seems like a channel. Sniffing enables the detection of data by individual people as it has been transferred throughout a cable. Appropriate nodes are using this methodology to make a diagnosis of connection issues, or even just harmful programs to obtain confidential information, like authentication and encryption.A user calls the helpdesk and states that they are receiving an IP conflict error on their computer. The user is on a company network that uses DHCP. The technician verifies the PC is using DHCP to obtain TCP/IP settings. Which of the following commands should the helpdesk technician use to resolve this issue? (Select two.)
A. IPCONFIG /REGISTERDNS
B. IPCONFIG /FLUSHDNS
C. IPCONFIG /RELEASE
D. IPCONFIG /RENEW
E. IPCONFIG /ALL
Answer:
a
Explanation:
none
If you have a 3D printer please show me a vid of you making something because I'm interested in getting one. Ty! Also can someone show me how to put more points in a question that I ask on Brainly?
Explanation:
Too add more points on your brainly question(phone), type your question
Then, see on your top left, you can see the points. It will show 10,which means you have to lose 10 points which is the minimum points for one question. If you are generous to give more points, click on it the you can scroll till the maximum point which is 100..but each points you give will divide 2.
For example, you just loose 10 points for your question but I only got 5 points
Hope you understand this
I'm not sure with laptop
HAVE A GOOD DAY!
Asia pacific and Japanese sales team from cloud kicks have requested separate report folders for each region.The VP of sales needs one place to find the reports and still wants to retain visibility of the reports in each folder. What should a consultant recommended to meet this requirement.
Answer:
B) Create all new regional folders and move the reports to the respective region folder with viewer access.
Explanation:
Below are the options
A) Create grouped folders, keeping the top region folder sharing settings and limiting the sharing settings for the grouped folders for each region.
B) Create all new regional folders and move the reports to the respective region folder with viewer access.
C) Create all new regional folders and move the reports to the respective region folder with subscribe access.
D) Create subfolders, keeping the top region folder sharing settings and limiting the sharing settings for the subfolders for each region
In order to required reports at one place and also wants to retain the visibility for each folder the consultant should suggest that all new regional folders should be created and afterwards it would be moved to their relevant region folders by involving the viewer access feature so that the VP should access it anytime
Hence, the correct option is B.
Based on the information given, the correct option will be B. Create all new regional folders and move the reports to the respective region folder with viewer access.
From the information given, it was stated that the VP of sales needs one place to find the reports and still wants to retain visibility of the reports in each folder.
Therefore, it's important to create all new regional folders and move the reports to the respective region folder with viewer access.
Learn more about folders on:
https://brainly.com/question/20262915
Write a pseudocode algorithm which inputs numeric scores and outputs how many of them are over 100. The end of the data is signalled by a user input of -1.
Answer:
calculateCountGreaterThan100()
{
declare variable count with zero
while True
{
input numeric values from user
if user inputted value > 100
increment the count
if user inputted value == -1
break the loop
}
print the value of count
}
Explanation:
First of all, let us have a look at the meaning of a pseudocode:
A pseudocode is nothing but a informative way of expressing our code in simple plain English.
It is not written in programming language so it does not have any syntax rules.
Here, we are asked to write pseudocode algorithm for inputting numeric scores and output the number how many of them are greater than 100. The end of numbers is signalled by a user input of -1.
The answer is:
calculateCountGreaterThan100()
{
declare variable count with zero
while True
{
input numeric values from user
if user inputted value > 100
increment the count
if user inputted value == -1
break the loop
}
print the value of count
}
Here, we have declared a variable with initial count as 0.
Then, in a loop we are taking input from user in which user is giving integer input.
If the value is greater then zero, the count is incremented.
If the value is -1, we come out of the loop and then print the count value.
Pseudocode algorithm are algorithms that are implemented using pseudocodes, and it does not obey the syntax of a programming language.
The Pseudocode algorithmThe pseudocode algorithm is as follows:
count = 0
input num
while num != -1:
if num > 100:
count++
print(count)
The flowThe flow of the above pseudocode algorithm is as follows
First, variable count is initialized to 0Next, we take input for numNext, a loop is repeated until the input is -1During each loop, the inputs over 100 are countedLastly, the count of inputs greater than 100 is printedRead more about pseudocode algorithm at:
https://brainly.com/question/11623795
Write the steps to create labels in OpenOffice writer
1. Start up Open Office.Org.
2. Click on File >> New >> Labels.
3. In the label dialog box, click on the brand box. This will allow you to choose the type of paper that you use.
4. Select the type of document that you want. The usual standard is Avery, but feel free to explore and discover what you like.
5. Select if you want a single label, a document, and any other options. Some of the things you might want to do are:
- Create a variety of labels for folders or drawers
- Create a sheet of address labels
- Create decorative labels
6. Click New Document. Here, you see a sheet of blank labels.
7. Create the type of format/placement that you want for your labels. Once you are happy with it, copy it to the rest of the labels.
8. Fill your labels with necessary information.
9. Print them out.
1
TIME REMAINING
01:51:06
Zubair needs to change some of the data in a table that he has created. How should he go about selecting a row in
the table?
Moun the mourn nointor in a noint hefore the text in a cell
BP measuring machine is an example of __________
A)Computing device
B)Medical device
C)Embedded machine
D)None of these
Answer:
I think it is a Medical device.
BP = blood pressure
Explanation:
Paavo was reviewing a request by an executive for a new subnotebook computer. The executive said that he wanted USB OTG support and asked Paavo’s opinion regarding its security. What would Paavo tell him about USB OTG security
Answer:
Connecting a mobile device as a peripheral to an infected computer could allow malware to be sent to that device.
Explanation:
Since in the question it is mentioned that Paavo reviewed a request by an executive for subnotebook computer i.e new. but he needs to USB OTG support so it is a USB i.e on the go that links the devices from one device to another
Therefore by links the mobile device to the computer i.e infected that allows malware we called virus so that we are able to send it to that device. By this, he wants to tell about the USB OTG security
Chapter 21 discusses four aspects of the speaking situation you should take into account when planning the graphics you'll use in an oral presentation including the length of the presentation, the size and layout of the room, and the available equipment. What is the last aspect?
Answer:
The answer is "audience aptitude and experience "
Explanation:
The presentation is the ability to provide a variety of audiences with successful and stimulating interactions. The main objective of an oral presentation is to talk formally to a live audience about a particular subject. You have to write an oral speech that engages the audience and fulfills your goals.
In this type of presentation, the Listener-centric concept is effective as the productivity of a speaker is enhanced by creating and presenting the speech throughout the proper manner.
A company has a network printer that is utilzed by several departments. Although the printer shows online and other departments can access the printer, the accounting group is unable to print to this network printer. Which of the following would the technician use to resolve the problem?
a. The printer needs a maintenance kit repalced.
b. The TCP/IP print spooler service need to be restarted.
c. The security settings for the print spooler need to be modified to include the department.
d. Replace the network cable on the printer
Answer: c. The security settings for the print spooler need to be modified to include the department.
Explanation:
The print spooler makes Windows computer enable to interact with the printer, and to commands the printer for print jobs .
If all the other departments can access the printer, but not the accounting group, then the technician should check the security settings for the print spooler and modify it accordingly to include the accounting group .
Hence, the correct answer is c. The security settings for the print spooler need to be modified to include the department.