The change in the system's internal energy (ΔU) in process A is 32 J.
To find the change in a system's internal energy, you need to consider both the work done on the system and the heat added to the system. The First Law of Thermodynamics can be used to describe this relationship:
ΔU = Q - W
where ΔU represents the change in internal energy, Q represents the heat added to the system, and W represents the work done on the system.
In process A, 54 J of work (W) are done on the system and 86 J of heat (Q) are added to the system. Now, we can use the First Law of Thermodynamics to find the change in the system's internal energy (ΔU):
ΔU = Q - W
ΔU = 86 J - 54 J
ΔU = 32 J
So, the change in the system's internal energy (ΔU) in process A is 32 J. This means that the internal energy of the system has increased by 32 J due to the combination of work done on the system and heat added to the system.
learn more about Thermodynamics Refer: https://brainly.com/question/1368306
#SPJ11
to establish that the universe was very, very large, edwin hubble used ________.
To establish that the universe was very, very large, Edwin Hubble used observations of galaxies and their redshifts.
Edwin Hubble, an American astronomer, made groundbreaking discoveries that revolutionized our understanding of the universe. One of his key contributions was the realization that galaxies exist beyond the boundaries of our Milky Way and that the universe is much larger than previously believed. Hubble observed numerous galaxies and noticed that their light exhibited a redshift. This redshift phenomenon occurs when light waves from distant objects stretch as the universe expands, causing the wavelengths to appear longer, shifting towards the red end of the spectrum. Hubble's observations showed a correlation between the distance of galaxies and the magnitude of their redshifts.
Learn more about galaxies here:
https://brainly.com/question/28284746
#SPJ11
if the maximum intensity is 3.90 w/m2 at the antenna, what is the intensity at ±5.50∘ from the center of the central maximum at the distant antenna? express your answer in watts per square meter.
To determine the intensity at ±5.50∘ from the center of the central maximum at the distant antenna, we need to consider the concept of diffraction patterns produced by antennas or apertures.
In a diffraction pattern, the intensity decreases as we move away from the central maximum. The intensity can be described by the equation:
Intensity = (Max Intensity) * (sin(θ)/θ)^2
where θ is the angle from the center of the central maximum.
Given that the maximum intensity is 3.90 W/m², we can calculate the intensity at ±5.50∘ using the above formula:
Intensity = (3.90 W/m²) * (sin(5.50∘)/5.50∘)^2
Calculating this expression gives us the intensity at ±5.50∘ from the center of the central maximum at the distant antenna. Please note that the specific value of the intensity depends on the diffraction characteristics of the antenna or aperture, which may vary in different scenarios.
To know more about diffraction, click here https://brainly.com/question/31644513
#SPJ11
1. In a bike race, Lance Armstrong traveled at a speed of 25 m/s. How long did it
take him to travel 350 m?
2. What is your speed if you bike 50 meters in 15 seconds?
3. If Lance can go from 2 m/s to 30 m/s in 12 seconds, what is his acceleration?
The first two exercises are of the uniform rectilinear movement (MRU) is a type of movement that is characterized by a constant speed and a rectilinear trajectory. In other words, an object moving with MRU always moves at the same speed and in a straight line.
The formula to calculate the speed in the MRU is simple: v = d/t, where:
v is the speed
d is the distance traveled
t is the elapsed time
It is also possible to use the formula s = vt to calculate the distance traveled, where s is the distance and t is the time.
It is important to note that velocity in the MRU is a vector that has a magnitude (the velocity itself) and a direction (the direction of motion). In the MRU, the direction of movement is always constant and coincides with the direction of the trajectory.
1. In a bike race, Lance Armstrong traveled at a speed of 25 m/s. How long did it take him to travel 350 m?First we get the data:
V = Velocity = 25 m/s
T = time = ?
D = distance = 350 m
We already know that the MRU formula is V = d/t. But we must calculate the time, we clear the time, then:
t = d/v
We continue, substitute data and solve for time, then
t = d/v
t = (350 m)/(25 m/s)
t = 14 m
To travel 350 meters, it takes me 14 minutes.
2. What is your speed if you bike 50 meters in 15 seconds?To solve this, we first get the data:
V = speed = ?
D = distance = 50 m
T = time = 15 s
We know that the MRU formula is V = d/t. It is also the same formula for calculating velocity.
How should we calculate speed? It is not necessary to clear the formula, we substitute data and solve, then
V = d/t
V = (50 m)/(15 s)
V = 3.33 m/s
If I ride a bicycle 50 meters in 15 seconds, my speed is 3.33 meters per second (m/s).
As for the third exercise, it is an exercise of a rectilinear motion uniformly accelerated (MRUA), since Lance's speed increases constantly in time. A rectilinear motion uniformly accelerated (MRUA) is a type of motion in which an object moves in a straight line and its velocity changes uniformly in time due to constant acceleration. In this type of movement, the acceleration is constant, which means that the speed increases or decreases at a constant rate in each unit of time.
In the exercise presented, the change in speed of Lance is described, which increases from 2 m/s to 30 m/s in a time period of 12 seconds. Since the velocity changes uniformly in time, this motion can be determined to be an MRUA.The MRUA is a fundamental concept in physics and is used to describe many phenomena, from free-falling objects to moving vehicles. Uniformly accelerated rectilinear motion is described mathematically by a series of equations, relating position, velocity, acceleration, and time.
One of the most important equations in the MRUA is the velocity equation, which relates the final velocity (Vf), the initial velocity (Vi), the acceleration (a) and the time (t). The velocity equation can be expressed as:
Vf = Vi + a * tThis equation shows how the final velocity of an object in an MRUA depends on its initial velocity, acceleration, and elapsed time.
Another important equation in the MRUA is the position equation, which relates the final position (x), the initial position (x0), the initial velocity (Vi), the acceleration (a) and the time (t).
The position equation can be expressed as:
x = x0 + Vi × t + 1/2 * a × t²This equation shows how the position of an object in an MRUA changes as a function of time, initial velocity, acceleration, and initial position.
3. If Lance can go from 2 m/s to 30 m/s in 12 seconds, what is his acceleration?First we get the data, this is the first step to start solving:
Vf = Final speed = 12 m/s
Vo = Initial velocity = 2 m/s
t = time = 12 s
a = acceleration = ?
The velocity equation can be expressed as:
Vf = Vi + a * t.
We use this formula to clear the formula to calculate the acceleration,
a = (Vf - Vo)/tWe continue solving, now we substitute our data and solve:
a = (Vf - Vo)/t
a = (30 m/s - 2 m/s)/(12 s)
a = 2.33 m/s²
Its acceleration is 2.33 meters per second squared (m/s²).
ヘ( ^o^)ノ＼(^_^ )If you want to learn more about physics, I share this link to complement your learning:
https://brainly.com/question/23904736
A car is travelling along a country road that resembles a roller coaster truck. If car
travels with uniform speed, the force exerted by road on the car is maximum at:
a) A b) B c) C d) equal at all position A, B & C
A car is travelling along a country road that resembles a roller coaster truck. If car travels with uniform speed, the force exerted by road on the car is maximum at A.
Option A is correct.
How do we know?We can determine the force exerted by the road on the car by taking into consideration the direction of the net force acting on the car which is the force exerted by the road on the car is due to the normal force, which is perpendicular to the road surface.
The car is at the bottom of the roller coaster-like track at position A. We notice that the normal force from the road acts in the upward direction which is in opposition to the gravitational force on the car.
The force exerted by the road on the car is maximum at position A, hence the net force on the car is directed upward.
Learn more about force at:
https://brainly.com/question/12970081
#SPJ1
The 47-lblb package starts from rest, slides down the smooth ramp, and is stopped by the spring
When the 47-lb package is at the top of the ramp, it has only potential energy since it's at rest. This potential energy is equal to mgh (mass x gravity x height).
Where m is the mass of the package, g is the acceleration due to gravity, and h is the height of the package at the top of the ramp.
As a result, the package's potential energy is [tex]47 x 32.2 x 2 = 3039.4 ft-lbs[/tex].
When the package starts to slide down the ramp, this potential energy is transformed into kinetic energy, which is equal to (1/2) mv^2 (0.5 x mass x velocity^2).Where m is the mass of the package, and v is the velocity of the package at any point in time. If the package is moving at the bottom of the ramp, its kinetic energy is equal to 3039.4 ft-lbs.
Since the ramp is smooth, there is no friction between the ramp and the package, therefore the package's kinetic energy will not be lost as it slides down. The package collides with the spring after descending the ramp, which then compresses the spring, transforming the package's kinetic energy into elastic potential energy stored in the spring.
At this moment, all of the kinetic energy that the package had has been transformed into elastic potential energy of the spring.
To know more about Hooke's Law visit :
https://brainly.com/question/29126957
#SPJ11
You have a 1.50-m-long copper wire. You want to make an N-turn current loop that generates a 0.500 mT magnetic field at the center when the current is 1.10 A. You must use the entire wire. What will be the diameter of your coil?
The diameter of the coil will be approximately 0.38 meters (or 38 cm). To calculate this, we can use the formula for the magnetic field at the center of a current loop:
[tex]B = (μ₀ * N * I * R²) / (2 * R² + x²)^(3/2)[/tex]
where μ₀ is the permeability of free space, N is the number of turns, I is the current, R is the radius of the loop, and x is the distance from the center of the loop to the point where we want to measure the magnetic field.
We know that N = 2πR / L, where L is the length of the wire, so we can substitute that in and solve for R:
R = L / (2πN) = L / (2π * (L / (2πR))) = R² / L
Substituting that back into the first equation and solving for R, we get:
R = (μ₀ * N * I * L² / 2)^(1/3) / (2π)^(2/3)
Plugging in the given values, we get:
R ≈ 0.38 m
Therefore, the diameter of the coil will be approximately 0.38 meters (or 38 cm).
learn more about coil here:
://brainly.com/question/27961451
#SPJ11
what would be the energy of photons having the same wavelength as these electrons? express your answer in electron volts.
To calculate the energy of photons having the same wavelength as the electrons, we'll use the following steps:
1. Convert the wavelength of electrons to wavelength of photons using de Broglie's equation:
λ = h / (m * v), where λ is the wavelength, h is Planck's constant (6.626 × 10^-34 Js), m is the electron mass (9.109 × 10^-31 kg), and v is the electron velocity.
2. Calculate the frequency of the photons using the speed of light:
ν = c / λ, where ν is the frequency, c is the speed of light (2.998 × 10^8 m/s), and λ is the wavelength obtained in step 1.
3. Calculate the energy of the photons in joules using Planck's equation:
E = h * ν, where E is the energy, h is Planck's constant, and ν is the frequency obtained in step 2.
4. Convert the energy from joules to electron volts (eV) using the conversion factor:
1 eV = 1.602 × 10^-19 J
Once you have the electron velocity (v), you can follow these steps to find the energy of the photons in electron volts.
To know more about energy of photons visit:
https://brainly.com/question/2393994
#SPJ11
What is the current in the 4 ohm resistor in the circuit in the illustration?
The current in the 4 ohm resistor is 2 amperes.
To solve this problem, we need to use Ohm's Law, which states that the current flowing through a conductor between two points is directly proportional to the voltage across the two points and inversely proportional to the resistance between them.
this circuit, the total resistance is 8 ohms, so the current is 4 volts / 8 ohms = 0.5 amperes. Since the current flowing through the 8 ohm resistor and the 4 ohm resistor is the same, the voltage drop across the 4 ohm resistor is 2 volts (0.5 amperes x 4 ohms), which gives us a current of 2 amperes (2 volts / 1 ohm).
Therefore, the current in the 4 ohm resistor is 2 amperes.
Learn more about Resistance here.
brainly.com/question/800502
#SPJ11
because of the massive weight, the distance needed to stop an average train travelling at 55mph is
The distance needed to stop an average train traveling at 55 mph (miles per hour) depends on several factors, including the train's mass, speed, braking system, and track conditions. The braking capabilities of the train play a crucial role in determining the stopping distance.
On average, it is estimated that a typical freight train traveling at 55 mph may require a distance of approximately one mile (1.6 kilometers) to come to a complete stop. This estimate takes into account the train's weight, momentum, and the time required for the braking system to bring the train to a halt.
However, it is important to note that this is a rough estimate and can vary based on various factors such as the train's specific configuration, the condition of the track, the effectiveness of the braking system, and the operator's skill. Additionally, trains may be equipped with additional systems such as emergency brakes to assist in stopping in shorter distances when necessary.
To know more about distance please visit:
https://brainly.com/question/31713805
#SPJ11
a small rocket with 15 kn thrust burns 250 kg of fuel in 30 s. what is the exhaust speed of the hot gases?
The exhaust velocity of the hot gases is approximately 1,800 m/s.
To find the exhaust velocity of the hot gases, we can use the ideal rocket equation, which relates the exhaust velocity (Ve) to the thrust of the rocket (F) and the rate at which it burns fuel (m_dot):
Ve = F / m_dot
In this case, the thrust of the rocket is 15 kN (kilonewtons), or 15,000 N, and it burns 250 kg of fuel in 30 seconds. To find the rate at which it burns fuel (m_dot), we can divide the total mass of fuel burned by the time it takes to burn it:
m_dot = 250 kg / 30 s = 8.33 kg/s
Now we can substitute these values into the ideal rocket equation:
Ve = (15,000 N) / (8.33 kg/s) = 1,800 m/s
Therefore, the exhaust velocity of the hot gases is approximately 1,800 m/s.
Visit to know more about Velocity:-
brainly.com/question/80295
#SPJ11
which one of the following statements about quasars is true? astronomers discover quasars by identifying pairs of enormous radio-emitting lobes of gas. quasars appear bright because their compact mass gravitationally lenses background light, making them appear brighter than they actually are. all quasars are active galactic nuclei, but not all active galactic nuclei are quasars. quasars generate their tremendous luminosities via nuclear fusion inside their event horizons, which is then radiated outward into space. quasars sometimes rapidly fluctuate in brightness but are nonetheless comparable in size to their host galaxies.
The statement that is true about quasars is: "All quasars are active galactic nuclei, but not all active galactic nuclei are quasars."
A quasar is a type of active galactic nucleus (AGN) that is highly luminous and characterized by a compact region at the center of a massive galaxy that emits enormous amounts of energy. Quasars are not discovered by identifying pairs of enormous radio-emitting lobes of gas, which is a characteristic of radio galaxies.
Quasars do not appear bright because they gravitationally lens background light; instead, their high luminosity is due to the accretion of matter onto a supermassive black hole at the center of the galaxy. Quasars do not generate their tremendous luminosities via nuclear fusion inside their event horizons, but rather from the frictional heating and gravitational energy released by the infalling matter. Finally, quasars can fluctuate in brightness but are not comparable in size to their host galaxies, as they are typically much smaller.
To know more about galactic nuclei
https://brainly.com/question/29309280
#SPJ4
Which of the following statements is an operational definition of "fear of snakes" that could be assessed as a structured question?a. measuring heart rate following exposure to snakes.b. asking the question "When was the last time you saw a snake?"c. assigning the participant to keep a "daily fear diary" in which they track their fear level.d. asking, "On a scale of 1 to 10, how afraid of snakes are you?"
Correct option is (d): asking, "On a scale of 1 to 10, how afraid of snakes are you?"
How intense is fear?Option (d) asking, "On a scale of 1 to 10, how afraid of snakes are you?" is an operational definition of "fear of snakes" that can be assessed as a structured question.
This question provides a clear and quantifiable measure of the individual's fear level by assigning a numerical value on a scale. It allows participants to express their level of fear in a standardized and structured manner, facilitating easy comparison and analysis of responses.
This approach enables researchers to gather data on the intensity of fear experienced by individuals towards snakes and provides a measurable basis for studying and understanding the phenomenon of fear of snakes.
Learn more about fear
brainly.com/question/13981991
#SPJ11
What is the temperature of a gas of CO2 molecules whose rms speed is 328 m/s?
The temperature of the gas of CO2 molecules with an rms speed of 328 m/s is approximately 405 K.
The rms speed of gas molecules is given by the equation v(rms) = sqrt(3kT/m), where k is the Boltzmann constant, T is the temperature in Kelvin, m is the mass of one molecule, and v(rms) is the rms speed. Rearranging this equation to solve for T, we get T = (mv(rms)^2)/(3k). The mass of one CO2 molecule is approximately 44 amu (atomic mass units), or 7.3 x 10^-26 kg. Plugging in this value, as well as the given rms speed of 328 m/s and the Boltzmann constant k = 1.38 x 10^-23 J/K, we get T = (7.3 x 10^-26 kg)(328 m/s)^2/(3*(1.38 x 10^-23 J/K)) = 405 K (rounded to three significant figures).
To learn more about temperature, click here:
https://brainly.com/question/15354399
#SPJ11
A compressed-air tank holds 0.550 m^3 of air at a temperature of 289 K and a pressure of 890 kPa. What volume would the air occupy if it were released into the atmosphere, where the pressure is 101 {\rm kPa} and the temperature is 304 K?
When the air is released from the compressed-air tank into the atmosphere, it expands and occupies a volume of 4.84 m³ at the given temperature and pressure conditions.
To solve this problem, we can use the Ideal Gas Law equation, PV=nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature.
For this problem, we assume the number of moles of air (n) remains constant, so we can rearrange the equation to P₁V₁/T₁ = P₂V₂/T₂.
Initially, the air is in the compressed-air tank with a volume of 0.550 m³ (V₁), temperature of 289 K (T₁), and pressure of 890 kPa (P₁). When released into the atmosphere, the pressure is 101 kPa (P₂) and the temperature is 304 K (T₂). Our goal is to find the final volume (V₂) of the air in these atmospheric conditions.
Plugging the values into the equation,
we have (890 kPa × 0.550 m³) / 289 K = (101 kPa × V2) / 304 K.
After performing the calculations and solving for V₂, we find that the final volume of the air in the atmospheric conditions is approximately 4.84 m³.
Thus, when the air is released from the compressed-air tank into the atmosphere, it expands and occupies a volume of 4.84 m³ at the given temperature and pressure conditions.
Learn more about Ideal Gas Law equation here:
https://brainly.com/question/15379358
#SPJ11
If you increase your distance by a factor of 3 from a sound source that is radiating equally in all directions. What happens to the intensity of the sound? It reduces to a. 1/3 its original value. b. 1/27 its original value. c. 1/9 its original value. d. none of the above
If you increase the distance by a factor of 3, the intensity decreases by a factor of 9. This means that the correct answer is option b.
When you increase the distance by a factor of 3 from a sound source that is radiating equally in all directions, the intensity of the sound decreases. The relationship between distance and intensity is inverse square, meaning that if you double the distance from the source, the intensity decreases by a factor of 4. Therefore, if you increase the distance by a factor of 3, the intensity decreases by a factor of 9.
This means that the correct answer is option b, where the intensity reduces to 1/27th of its original value. It is important to note that this relationship assumes that there are no obstructions or other factors that could affect the sound wave as it travels through the air.
Learn more about sound waves here:
https://brainly.com/question/11797560
#SPJ11
a movie camera with a (single) lens of focal length 47.0 mm takes a picture of a person standing 23.4 m away. if the person is 153.5 cm tall, what is the height of the image on the film?
The height of the image of the person on the film is approximately 1.53 mm.
1/f = 1/do + 1/di
[tex]d_i[/tex] = 47.0 mm / (1/23.4 m - 1/47.0 mm) = 23.3 mm
(image height) / (object height) = (image distance) / (object distance)
(image height) = (object height) x (image distance) / (object distance)
(image height) = 1.535 m x 0.0233 m / 23.4 m ≈ 1.53 mm
Focal length is a fundamental concept in optics and photography that describes the distance between the lens and the image sensor or film when the lens is focused on infinity. It is usually measured in millimeters (mm) and is a critical factor in determining the angle of view and magnification of the image produced by a lens.
A lens with a short focal length, such as a wide-angle lens, has a wider angle of view and can capture a larger area in a single shot. On the other hand, a lens with a longer focal length, such as a telephoto lens, has a narrower angle of view and can magnify distant subjects. Focal length also affects depth of field, which is the range of distances in the scene that appears in sharp focus. A lens with a longer focal length produces shallower depth of field, while a shorter focal length results in deeper depth of field.
To learn more about Focal length visit here:
brainly.com/question/31755962
#SPJ4
A 3.9-mm-diameter wire carries a 15 A current when the electric field is 6.9 10-2 V/m Part A What is the wire's resistivity? Express your answer using two significant figures.
When, a 3.9-mm-diameter wire will carries a 15 A current, and the electric field is 6.9 10⁻² V/m. Then, the wire's resistivity is 6.5 × 10⁻⁸ Ω×m.
We can use Ohm's law to solve for the wire's resistivity, which relates the electric field, current, and wire's dimensions;
ρ = (E × A) / J
where ρ is resistivity, E is electric field, A is cross-sectional area, and J is current density.
First, we need to find the cross-sectional area of the wire;
A = π × (d/2)² = π × (3.9/2)² × 10⁻⁶ m² = 1.19 × 10⁻⁵ m²
where d is the wire's diameter.
Next, we can find the current density;
J = I / A = 15 A / 1.19 × 10⁻⁵ m²
= 1.26 × 10⁶ A/m²
Finally, we can use the equation for resistivity to solve for ρ;
ρ = (E × A) / J = (6.9 × 10⁻² V/m) × (1.19 × 10⁻⁵ m²) / (1.26 × 10⁶ A/m²) = 6.52 × 10⁻⁸ Ω×m
Therefore, the wire's resistivity is 6.5 × 10⁻⁸ Ω×m (in two significant figures).
To know more about resistivity here
https://brainly.com/question/30803596
#SPJ4
When a nurse aide wears gloves which link the chain of infection is broke?
Answer:
portal of entry link
Explanation:
This what I got hope that helps
a certain ac series rlc circuit operates at a frequency of 60 hz, the maximum voltage on the generator emf is 100 v, and the maximum current in the circuit is 5 a. if the current lags behind the generator emf by 60, (a) nd the impedance, and (b) nd the resistance. (c) if the capacitance is 5 f, what is the inductance?
a) The impedance is 20 ohms.
b) The resistance is 10 ohms.
c) The inductance can be either 462 ohms or 599.8 ohms, depending on whether the positive or negative sign is chosen in the equation for Xl.
(a) The impedance of the circuit can be found using the equation: Z = V/I, where V is the maximum voltage and I is the maximum current. Therefore,
Z = 100 V / 5 A = 20 ohms.
(b) The resistance can be found using the equation: R = Z cos(θ), where θ is the phase angle between the voltage and current. In this case, θ = 60 degrees, so
R = 20 ohms * cos(60 degrees) = 10 ohms.
(c) The reactance of the capacitor can be found using the equation: Xc = 1 / (2πfC), where f is the frequency and C is the capacitance. Plugging in the given values, we get Xc = 1 / (2π * 60 Hz * 5 F) ≈ 530.9 ohms.
The reactance of the inductor can be found using the equation: Xl = 2πfL, where L is the inductance. Since we know the total impedance (Z) and the reactance of the capacitor (Xc), we can use the Pythagorean theorem to find the reactance of the inductor:
Z² = R² + (Xl - Xc)²
(Xl - Xc)² = Z² - R²
Xl - Xc = ±√(Z² - R²)
Xl = Xc ± √(Z² - R²)
Plugging in the given values, we get:
Xl = 530.9 ohms ± √(20² ohms - 10² ohms) ≈ 530.9 ohms ± 68.9 ohms
So the inductance can be either 462 ohms or 599.8 ohms, depending on whether the positive or negative sign is chosen in the equation for Xl.
To learn more about maximum voltage click on,
https://brainly.com/question/13993161
#SPJ4
Suppose you pull a suitcase with a strap that makes a 45° angle with the horizontal. The magnitude of the force you exert on the suitcase is 30 lb. a. Find the horizontal and vertical components of the force. b. Is the horizontal component of the force greater if the angle of the strap is 30° instead of 45°? c. Is the vertical component of the force greater if the angle of the strap is 30° instead of 45°?
A physics concept called force defines the impact one thing has on another, causing it to accelerate or change shape. The rate at which an object's momentum changes is measured in newtons (N) by the International System of Units (SI).
a. To find the horizontal and vertical components of the force, we can use trigonometry. Let F be the force you exert on the suitcase, and then the horizontal component of the force (F_h) is given by F_h = F cos(theta), where theta is the angle between the strap and the horizontal. In this case, theta = 45°, so F_h = 30 lb * cos(45°) = 21.2 lb. Similarly, the vertical component of the force (F_v) is given by F_v = F sin(theta), so F_v = 30 lb * sin(45°) = 21.2 lb.
b. If the angle of the strap is 30° instead of 45°, then the horizontal component of the force would be greater. This is because the horizontal component of the force is proportional to the cosine of the angle, and the cosine of 30° is greater than the cosine of 45°. Specifically, F_h = 30 lb * cos(30°) = 25.9 lb.
c. If the angle of the strap is 30° instead of 45°, then the vertical component of the force would be smaller. This is because the vertical component of the force is proportional to the sine of the angle, and the sine of 30° is smaller than the sine of 45°. Specifically, F_v = 30 lb * sin(30°) = 15 lb.
To know more about the International System of Units visit:
https://brainly.com/question/26178810
#SPJ11
The fastest pitch ever thrown was 105 mph, or 47 m/s. Wow! The moon's gravity is 16. 7% that of earth. If this pitcher threw the ball straight up on earth, it would reach a height of 112. 59 meters. How high would it go on the moon? This is a conversation of energy program. Kinetic energy = Potential energy. Truncate
The ball would reach a height of approximately 68.88 meters on the moon.
How to find height?To find the height the ball would reach on the moon, equate the kinetic energy of the ball on Earth to the potential energy it reaches at its maximum height.
On Earth:
Kinetic energy (KE) = Potential energy (PE)
The kinetic energy of the ball can be calculated using the formula:
KE = (1/2) × mv²
Let's assume the mass of the ball is m, and the velocity is v.
On Earth, the kinetic energy of the ball is:
KE_earth = (1/2) × m × (47 m/s)²
The potential energy of the ball at its maximum height on Earth is given by:
PE_earth = m × g × h_earth
where g = acceleration due to gravity on Earth (9.8 m/s²) and h_earth = height reached on Earth (112.59 meters).
Therefore, the equation:
KE_earth = PE_earth
(1/2) × m × (47 m/s)² = m × 9.8 m/s² × 112.59 meters
Now, calculate the height the ball would reach on the moon using the given information that the moon's gravity is 16.7% that of Earth's.
On the Moon:
The acceleration due to gravity on the Moon (g_moon) is 16.7% of Earth's gravity:
g_moon = 0.167 × 9.8 m/s²
The potential energy of the ball at its maximum height on the Moon is given by:
PE_moon = m × g_moon × h_moon
where h_moon = height we need to calculate.
Since the kinetic energy of the ball is conserved (KE_earth = KE_moon), we can set up the equation:
(1/2) × m × (47 m/s)² = m × g_moon × h_moon
Now solve for h_moon:
(1/2) × (47 m/s)² = g_moon × h_moon
h_moon = [(1/2) × (47 m/s)²] / g_moon
Substituting the values:
h_moon = [(1/2) × (47 m/s)²] / (0.167 × 9.8 m/s²)
h_moon = 68.88 meters
Therefore, the ball would reach a height of approximately 68.88 meters on the moon.
Find out more on conservation of energy here: https://brainly.com/question/27422874
#SPJ1
the resistance on a delta wired three-phase 240 vac 15 kw electric duct heater. if one element is open, what would the measurements be
If one element in a delta-wired three-phase 240 VAC 15 kW electric duct heater is open, the resistance between any two phases would increase by a factor of three.
In a delta-wired three-phase system, each element is connected between two phases, forming a closed loop. If one element is open, the circuit is broken, and the resistance between the two phases connected to the open element increases by a factor of three. This is because, in a delta-wired system, the total resistance is the sum of the individual resistances of each element, and with one element open, the total resistance increases significantly.
In terms of measurements, we could use a multimeter to measure the resistance between any two phases before and after the element is opened. The resistance between the two phases connected to the open element would increase by a factor of three, while the resistance between the other two phases would remain the same. It is important to note that with one element open, the total power output of the heater would be reduced, as the open element would not be contributing to the heating.
Learn more about resistance here:
brainly.com/question/17044230
#SPJ11
Complete Question:
the resistance on a delta wired three-phase 240 vac 15 kw electric duct heater. if one element is open, what would the measurements be?
Water flows in a smooth 0.2m diameter pipeline that is 65m long. The Reynolds number is 10 . Determine the flow rate and pressure drop. After many years of use, minerals deposited on the pipe cause the same pressure drop to produce only one-half the original flow rate. Estimate the size of the relative roughness elements for the pipe.
Flow rate: Using the Reynolds number equation for laminar flow, we can solve for the flow rate Q:
Re = (rho * v * D) / mu, where rho is the density of water, v is the velocity, D is the diameter of the pipe, and mu is the dynamic viscosity of water.
Re-Number = 10^4
Diameter = 0.2 m
Density of Water, rho = 1000 kg/m^3
Dynamic viscosity of Water, mu = 0.001 Ns/m^2
Solving for the velocity v: v = Re * mu / (rho * D) = 10^4 * 0.001 / (1000 * 0.2) = 0.05 m/s
Solving for the flow rate: Q = pi * D^2 / 4 * v = pi * (0.2)^2 / 4 * 0.05 = 0.00157 m^3/s
Pressure drop: We can use the Hagen-Poiseuille equation to calculate the pressure drop:
delta P = 32 * mu * L * Q / (pi * D^4)
delta P = 32 * 0.001 * 65 * 0.00157 / (pi * (0.2)^4) = 16.5 Pa
Relative roughness: After many years of use, the minerals deposited on the pipe cause the same pressure drop to produce only one-half the original flow rate. Let's assume that the flow rate is reduced by a factor of 1/2. We can then use the Darcy-Weisbach equation to solve for the relative roughness:
delta P / L = f * rho * v^2 / (2 * D)
f = 64 / Re (for laminar flow)
For the reduced flow rate, we have:
Q' = 0.5 * Q = 0.5 * 0.00157 = 0.000785 m^3/s
v' = Q' / (pi * D^2 / 4) = 0.000785 / (pi * (0.2)^2 / 4) = 0.198 m/s
Re' = (rho * v' * D) / mu = (1000 * 0.198 * 0.2) / 0.001 = 39,600
Using the Darcy-Weisbach equation, we can solve for the relative roughness epsilon/D:
delta P / L = f * rho * v^2 / (2 * D)
delta P' / L = f' * rho * (v')^2 / (2 * D)
Since delta P' = delta P / 2 and Q' = Q / 2, we have:
f' = f / 4 = 16 / Re = 16 / 39600 = 0.000404
Solving for epsilon/D:
delta P / L = f * rho * v^2 / (2 * D)
epsilon / D = 2 * delta P / (f' * rho * v^2) - 1
epsilon / D = 2 * 16.5 / (0.000404 * 1000 * 0.198^2) - 1
epsilon / D = 0.0057
Therefore, the size of the relative roughness elements for the pipe is approximately 0.57%.
Learn more about Reynolds number here:- brainly.com/question/31748021
#SPJ11
Monica took a train 30 miles south to Cincinnati. Then she took a different train 18 miles east. Draw a vector diagram showing Monica's trip, including the resultant vector. Be sure to label all vectors
If Monica took a train 30 miles south to Cincinnati after which she took a different train 18 miles east, then the resultant vector is 35 miles 59 degrees south of east.
What is a resultant vector ?A resultant vector is defined as a single vector that produces the same effect as is produced by a number of vectors collectively.
We calculate using the Pythagorean theorem
c² = a²+ b²
where c = resultant vector
a and b = individual trip
c² = 30²+ 18²
c² = 1224
c = 35 miles
angle = arctan ( 30 /18)
angle = 59 degrees
In conclusion, Vectors in the opposite direction are subtracted from each other to obtain the resultant vector.
Learn more about resultant vector. at:
https://brainly.com/question/28047791
#SPJ1
a 25 mm sphere is maintained at 64 c in 20 c quiescent water find the power required to maintain the sphere
The power required to maintain the 25 mm sphere at 64°C in 20°C quiescent water is approximately 8.6 W.
To calculate the power required to maintain the sphere, we can use the following formula:
[tex]Power = (heat transfer) *(coefficient ) *(surface area) * (temperature difference)[/tex]
First, we need to find the temperature difference between the sphere and the water. The sphere is maintained at 64°C and the water is at 20°C, so the temperature difference is:
ΔT = 64°C - 20°C = 44°C
Next, we need to find the surface area of the sphere. The formula for the surface area of a sphere is:
[tex]Surface area = 4\pi r^{2}[/tex]
where r is the radius of the sphere. Since the sphere has a diameter of 25 mm, its radius is 12.5 mm (or 0.0125 m). Therefore, the surface area of the sphere is:
Surface area = 4π(0.0125 m)² = 0.0019635 m²
Now we need to find the heat transfer coefficient. This is a measure of how easily heat can be transferred between the sphere and the water. It depends on factors such as the properties of the materials and the flow rate of the water. For simplicity, let's assume a heat transfer coefficient of 100 W/(m²°C).
Finally, we can plug these values into the formula for power:
Power = 100 W/(m²°C) x 0.0019635 m² x 44°C = 8.6 W
Learn more about power here
https://brainly.com/question/28543506
#SPJ11
for series circuits, you saw that the current was the same through every element. use your rule for current in parallel to explain why this would happen.
According to the rule for current in parallel circuits, the current through each branch of the circuit is determined by the resistance of that branch and the total voltage applied to the circuit. In a series circuit, there is only one path for the current to flow, so the same current flows through every element.
In a parallel circuit, on the other hand, there are multiple paths for the current to flow, and the current through each branch is determined by the resistance of that branch and the total voltage applied to the circuit. Because the voltage is the same across each branch of a parallel circuit, the current through each branch will depend only on the resistance of that branch. Therefore, the current through each branch can be different in a parallel circuit. In contrast, because there is only one path for the current to flow in a series circuit, the same current flows through every element.
To learn more about parallel circuit:
https://brainly.com/question/11409042
#SPJ11
what is the ph of a solution prepared by dissolving 0.15 gram of solid cao in enough water to make 2.00 l of aqueous ca(oh)2
The pH of the solution prepared by dissolving 0.15 gram of solid CaO in enough water to make 2.00 L of aqueous Ca(OH)2 is approximately 12.5.
When CaO is dissolved in water, it reacts with water to form Ca(OH)2. This reaction is highly exothermic and releases a significant amount of heat. The resulting Ca(OH)2 is a strong base with a high pH. In this case, the Ca(OH)2 is dissolved in a large volume of water, which further dilutes the solution and lowers the pH slightly. However, since Ca(OH)2 is a strong base, the pH of the resulting solution is still quite high, around 12.5.
To learn more about pH, click here:
https://brainly.com/question/491373
#SPJ11
an astronomer studying the spectrum of a distant galaxy finds that its recessional velocity is 1,100 km/s. what is the distance to the galaxy? take hubble's constant (h0) to be 22 km/s/mly
The distance to the galaxy is 50 million light years.
Recessional velocity of the galaxy, v = 1100 km/s
Hubble's constant, H₀ = 22 km/s/mly
Hubble made the amazing discovery that the redshift of galaxies was directly correlated with the distance of the galaxy from the earth. As a result, objects farther from Earth were moving away more quickly. Alternatively said, the universe must be expanding.
According to Hubble's law, the velocity of recession between our galaxy and the other galaxies is directly proportional to the distance between one another.
So, the velocity of recession of the galaxy,
v = H₀ d
Therefore, the distance to the galaxy,
d = v/H₀
d = 1100/22
d = 50 mly
To learn more about Hubble's law, click:
https://brainly.com/question/10181633
#SPJ1
when energy is converted from one form to another, a tiny amount is inevitably lost. group of answer choices true false
Statement is True. When energy is converted from one form to another, a small amount of energy is inevitably lost due to various factors such as friction, heat dissipation, and inefficiencies in the conversion process. This phenomenon is known as energy loss or energy dissipation.
According to the law of conservation of energy, energy cannot be created or destroyed, but it can be transformed from one form to another. However, in practical situations, energy conversions are never 100% efficient, and some energy is always lost in the process. This loss occurs mainly in the form of heat.
The exact calculation of energy loss depends on the specific system and conversion process involved. For example, if electrical energy is converted into mechanical energy using an electric motor, the efficiency of the motor determines the amount of energy lost. Efficiency is usually expressed as a percentage, indicating the ratio of useful output energy to the input energy. The energy lost can then be calculated by subtracting the output energy from the input energy.
In summary, when energy is converted from one form to another, a small amount of energy is inevitably lost due to various factors. This loss is a result of real-world inefficiencies in the conversion process, such as friction and heat dissipation. Therefore, it is important to consider energy losses when designing systems or evaluating the overall efficiency of energy conversion processes.
To know more about energy, visit;
https://brainly.com/question/2003548
#SPJ11
A square tile having 50 cm side is designed to withstand a pressure of 200n/m sq. Find out if a force of 45n can be applied on tile
A square tile that has a 50 cm side is designed to withstand a pressure of 200 N/m². We have to determine if a force of 45 N can be applied to the tile.
The formula for pressure is:
Pressure = Force/Area, where area is in square meters.
To determine the maximum force that can be applied to the tile, we need to first convert the side length of the tile from centimeters to meters.50 cm = 0.5 m
The area of the tile is:
Area = (side length)²Area = (0.5 m)²Area = 0.25 m²
Using the formula for pressure: Pressure = Force/Area200 N/m² = F/0.25 m²
Multiplying both sides by 0.25 m²:50 N = F
Therefore, the maximum force that can be applied to the tile is 50 N, which is greater than the force of 45 N.
Therefore, a force of 45 N can be applied to the tile.
To know more about Pressure visit :
https://brainly.com/question/30673967
#SPJ11