Answer:
Test bullets fired from the suspected gun
Explanation:
This is the correct answer!! I took the test!!
If your parasympathetic nervous system was activated what might you be doing?
A. Relaxing under a tree
B. Running a marathon
C. Skiing
D. Driving home in traffic
what is the momentum of an object that is not moving?
Answer:
The momentum of any object that is at rest is 0. Objects at rest do not have momentum..
Given a force of 100N and an acceleration of 5 m/s2 , what is the mass?
Answer:
20kg
Explanation:
Given parameters:
Force = 100N
Acceleration = 5m/s²
Unknown:
Mass = ?
Solution:
According to Newton's second law of motion:
Force = mass x acceleration;
So;
Mass = [tex]\frac{force }{acceleration}[/tex]
Mass = [tex]\frac{100}{5}[/tex] = 20kg
What is the longest wavelength that can be observed in the third order for a transmission grating having 5200 slits/cm?
Answer:
641 nm.
Explanation:
Given that,
A transmission grating has 5200 slits/cm.
We need to find the longest wavelength that can be observed in the third order. Using grating equation as follows :
[tex]d\sin\theta=m\lambda[/tex] ...(1)
d is slit spacing
No fo slit per unit length :
[tex]N={5200}\ slit/cm\\\\=520000\ slits/m[/tex]
We know that, N = 1/d
For longest wavelength, θ = 90°
From equation (1)
[tex]\dfrac{\sin\theta}{m\lambda}=\dfrac{1}{d}\\\\520000=\dfrac{\sin(90)}{3\lambda}\\\\\lambda=\dfrac{1}{520000\times 3}\\\\=6.41\times 10^{-7}\ m\\\\=641\ nm[/tex]
Hence, the longest wavelength in third order for a transmission grating is 641 nm.
A model airplane with mass 1.0 kg is held by a wire so that it flies in a horizontal circle with radius 20.0 m. The airplane engine provides a net thrust of 1.0 N perpendicular to the wire. (a) Find the torque the net thrust produces about the center of the circle. (b) Find the angular acceleration of the airplane when it is in this horizontal flight.
Answer:
330
Explanation:
(a) The torque the net thrust produces about the center of the circle is of 20 N-m.
(b) The angular acceleration of the airplane when it is in this horizontal flight is 0.1 rad/s².
Given data:
The mass of model airplane is, m = 1.0 kg.
The radius of horizontal circle is, r = 20.0 m.
The magnitude of net thrust by engine is, F = 1.0 N.
(a)
The effort made to turn any object is known as the torque. The mathematical expression for the torque is given as,
T = F × r
Solving as,
T = 1.0 × 20.0
T = 20 N-m
Thus, we can conclude that the torque the net thrust produces about the center of the circle is of 20 N-m.
(b)
The expression for the angular acceleration of airplane during the horizontal flight is given as,
[tex]T = I \times \alpha[/tex]
Here, I is the moment of inertia of airplane and its value is,
[tex]I = \dfrac{1}{2}mr^{2}\\\\\\I = \dfrac{1}{2} \times 1.0 \times 20^{2}\\\\\\I =200 \;\rm kg.m^{2}[/tex]
So, the angular acceleration is,
20 = 200 × α
α = 20/200
α = 0.1 rad/s²
Thus, we can conclude that the angular acceleration of the airplane when it is in this horizontal flight is 0.1 rad/s².
Learn more about the torque here:
https://brainly.com/question/19247046
what is the shallowest part of the ocean ecosystem is called
Answer:
intertidal zone.
the shallowest part of the ocean ecosystem, where the ocean floor os covered and uncovered as the tide goes in and out. Plankton. the organisms that float on the water in aquatic ecosystems and are unable to swim.
pls tell the answer
Just flip one of the batteries to connect one's positive terminal to others negative terminal.
Two men, Joel and Jerry, push against a car that has stalled, trying unsuccessfully to get it moving. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do on the car.
a. Joel does 75% more work than Jerry.
b. Joel does 25% more work than Jerry.
c. Jerry does 50% more work than Joel.
d. Joel does 50% more work than Jerry
e. None of the above .
Answer:
the answer is B
Explanation:
What determines the type of air mass that forms in an area?
Question 11 options:
The amount of oxygen present
The amount of air present
The direction of air flow
The location where it forms
Answer: no because you have left the number
Explanation:
You did 550 J of work lifting a 220 N backpack. How high did you lift the backpack?
Answer:
0.255 meters
Explanation:
cause formula to calculate work done against gravity is mgh where m refers mass g refers acceleration due to gravity and h refers height
At what angle should the roadway on a curve with a 50-m radius be banked to allow cars to negotiate the curve at 12 m/s even if the roadway is icy (and the frictional force is zero)
Answer:
The value is [tex]\theta = 16.38^o[/tex]
Explanation:
From the question we are told that
The radius is [tex]r = 50 \ m[/tex]
The velocity is [tex]v = 12 \ m/s[/tex]
Generally the angle is mathematically represented as
[tex]\theta = tan^{-1} [\frac{v^2}{ gr} ][/tex]
=> [tex]\theta = tan^{-1} [\frac{12^2}{ 9.8 * 50 } ][/tex]
=> [tex]\theta = tan^{-1} [ 0.2939 ][/tex]
=> [tex]\theta = 16.38^o[/tex]
Find the resultant of the following displacement:
A = 20 Km 30° south of east;
B = 50 Km due west;
C = 40 Km north east;
D = 30 Km 60° south of west.
Answer:
Explanation:
Basically you just have to find the left vectors. To do so divide A, C and D into horizontal and vertical vector. A: 10km to south and 10root3 to east. Just sine and cosine of 30 at 20km. D: 15 km to west and 15root3 to south. Again sine and cosine of 60 at 30 km. C: 45 degrees so 20root2 to north and east. Add all these up with B. Then you have 7.696 km due south and 19.395 km due west. Resultant displacement magnitude = root(7.696^2+19.395^2)=20.866 south of west with angle=arctan(7.696/19.395)=21.644 degrees
ASTRONOMY
Match the following phases of stellar evolution to its characteristics.
*please help me thx*
Answer:
1. Brown dwarf.
2. Red giant.
3. Black dwarf.
4. White dwarf.
5. Black hole.
Explanation:
A star is a giant astronomical or celestial object that is comprised of a luminous sphere of plasma, binded together by its own gravitational force.
Basically, stars are typically made up of two (2) main hot gas, Hydrogen (H) and Helium (He).
Some of the examples of stars are; Canopus, Sun (closest to the Earth), Betelgeus, Antares, Vega etc.
1. Brown dwarf: does not undergo hydrogen fusion.
2. Red giant: has an outer shell of burning hydrogen and a core of helium.
3. Black dwarf: a white dwarf that has lost all its energy.
4. White dwarf: has a core of carbon that is not massive enough to fuse. A white dwarf also known as degenerate dwarf is a star or an electron degenerate matter and is as massive as the Sun but only about as large in size as planet Earth. Also, the maximum mass of a white dwarf is about 1.4 times the mass of the Sun.
5. Black hole: formed from the collapse of a white dwarf beyond 1.5 solar masses.
Answer:
other person is correct!!!
Explanation:
got 100 on test
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view aditional
questions
Cause and Effect Graphic Organizers
Describe how T-charts and Star Charts can be used to organize information into cause and effect relationships.
I
Answer:
A T-chart is used comparing two sides of a topic for example pros and cons or cause and effect. A star diagram is used for organizing the characteristics of a single topic, a central space is used for displaying the topic, with each point showing or listing an attribute about the topic.
A food processor draws 8.47 A of current when connected to a potential difference of 110 V.
How much electrical energy is consumed by this food processor monthly (30 days) if it is used on average of 10.0 min every day?
Answer:
27.95[kW*min]
Explanation:
We must remember that the power can be determined by the product of the current by the voltage.
[tex]P=V*I[/tex]
where:
P = power [W]
V = voltage [volt]
I = amperage [Amp]
Now replacing:
[tex]P=110*8.47\\P=931.7[W][/tex]
Now the energy consumed can be obtained mediate the multiplication of the power by the amount of time in operation, we must obtain an amount in Kw per hour [kW-min]
[tex]Energy = 931.7[kW]*30[days]*10[\frac{min}{1day} ]=279510[W*min]or 27.95[kW*min][/tex]
A boy on a bicycle approaches a brick wall as he sounds his horn at a frequency 400 Hz. The sound he hears reflected back from the wall is at a frequency 408 Hz. At what speed is the boy riding his bicycle toward the wall
Answer:
6.8 m/s
Explanation:
To solve this, we would use the Doppler's Effect. Doppler's effect is represented by the formula
f = [(g + vr)/(g + vs)].fo, where
f = observed frequency, 408 Hz
g = speed of sound in air, 340 m/s
vr = velocity of the receiver
vs = velocity of the source, 0 m/s
fo = source frequency, 400 Hz
Now, applying the values to the equation, we have
408 = [(340 + vr)/(340 + 0) * 400
408/400 = (340 + vr)/340
1.02 * 340 = 340 + vr
346.8 = 340 + vr
vr = 346.8 - 340
vr = 6.8 m/s
Therefore the speed at which the boy is riding his bicycle towards the wall is 6.8 m/s
write the characteristic of aluminum
Answer:
see below
Explanation:
alluminium is,
1.lustrous
2.highly malleable
3.reactive metal
4.some times acts as non metal
5.good conductor
6.obtained from bauxite
7.Atomic number 13 so electrons and protons are 13
8.neurons are 14
9.ductile
10.melting point is very high approximately 660 degree celsius.
Answer:
It has low density, is non-toxic, has a high thermal conductivity, has excellent corrosion resistance and can be easily cast, machined and formed.
Explanation:
What is true of the bottom layer of the ocean
Answer:
well i tough it was infinte but its not an the layer is a d i c k
Explanation:
An earth satellite travels in a circular orbit at 20,000 mph if the radius of the orbit is 4,300 mi what angular velocity is generated?
Answer:
0.00129rad/s
Explanation:
The angular velocity is expressed as;
v = wr
w is the angular velocity
r is the radius
Given
v = 20,000 mph
r = 4300mi
Get w;
w = v/r
w = 20000* 0.44704/4300*1609.34
w = 8940.8/6,920,162
w = 0.00129rad/s
Hence the angular velocity generated is 0.00129rad/s
room's become bright at the day time although there is no bright sunlight in the rooms why
this is give reason
Answer:
The room become bright in the day by a process call scattering of light or Rayleigh scattering.
Explanation:
It is called Rayleigh scattering or scattering of light because Rayleigh scattering is the scattering if light or electromagnetic radiation by smaller particles which have radius of less than 110 nanometer in a medium and the wavelengths of the electromagnetic. Wave or light remain unchanged. The scattering of light occur in the day time in the room and this bring of brighten up of the room.
1. What is the total distance traveled?
A 3.0m
B 4.0m
C 5.0m
D 6.0m
Answer:
c
Explanation:
it is difficult to walk on a smooth floor why
Answer:
because theres is not enough friction so it will be super slippery
Explanation:
A 430.0 g mass is being pushed by a 1.1 N net force. What is the acceleration?
Answer:
[tex]a = 2.56\ m/s^2[/tex]
Explanation:
Mechanical Force
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
F = m.a
Where a is the acceleration of the object.
The object has a mass of m=430 g = 0.43 Kg and is pushed by a net force of F=1.1 N. To calculate the acceleration, we solve for a:
[tex]\displaystyle a=\frac{F}{m}[/tex]
[tex]\displaystyle a=\frac{1.1}{0.43}[/tex]
[tex]\mathbf{a = 2.56\ m/s^2}[/tex]
A red laser with a wavelength of 670 nm and a blue laser with a wavelength of 450 nm emit laser beams with the same light power. How do their rates of photon emission compare
E=hf C=wavelength*F
E=hC/wavelength
E=(6.626*10^-34)*(3.00*10^8)/670*10^-9
E=(6.626*10^-34)*(3.00*10^8)/450*10^-9
Which type of bond has elements with the greatest difference in electronegativity?
Covalent
Ionic
Metallic
Polar
Plz Help
Answer:
inonic bond has greatest difference in electronegativiru
The type of bond that has elements with the greatest difference in electronegativity ionic bond. The correct option is is B.
What is electronegativity?Electronegativity is a chemical property that describes an atom's or functional group's tendency to attract electrons toward itself.
An atom's electronegativity is affected by both its atomic number and the distance between its valence electrons and the charged nuclei.
Electronegativity is a measurement of an atom's proclivity to attract electrons (or electron density) towards itself.
It governs the distribution of shared electrons between two atoms in a bond. The greater an atom's electronegativity, the more strongly it attracts electrons in its bonds.
Ionic bonds are formed by elements with large differences in electronegativity. Covalent bonds are formed between atoms of elements with similar electronegativity.
Thus, the correct option is B.
For more details regarding electronegativity, visit:
https://brainly.com/question/17762711
#SPJ2
A 50.0-kg child stands at the rim of a merry-go-round of radius 2.00 m, rotating in such a way that it makes one revolution in 2.09 s. What minimum coefficient of static friction between her feet and the floor of the merry-go-round is required to keep her in the circular path
Answer:
2.01
Explanation:
First, we need to find the centripetal acceleration.
We're given that the merry go round rotates 1 revolution in 2.09 seconds. Converting to rpm, we know that it rotates 30 revolution per minute
Now this speed gotten in rpm will be converted to m/s, to ease the calculation
30 rpm = πdN/60 m/s
30 rpm = (3.142 * 4 * 30)/60
30 rpm = 377.04/60
30 rpm = 6.284 m/s
a(c) = v²/r
a(c) = 6.284²/2
a(c) = 39.49 / 2
a(c) = 19.74 m/s²
F = ma
F = 50 * 19.74
F = 987 N
Also, Normal Force, F(n) =
F(n) = mg
F(n) = 50 * 9.81
F(n) = 490.5
We then use this to find the coefficient of static friction, μ
μ = F/F(n)
μ = 987 / 490.5
μ = 2.01
To celebrate a victory, a pitcher throws her glove straight upward with an initial speed of 5.3 m/s. How long does it take for the glove to reach its maximum height
Hello!!
For the maximum height the final velocity is zero, because can't up more.
Then, use the formula:
V = Vi + gt
Replacing, we have:
0 m/s = 5,3 m/s + (-9,8 m/s² * t)
0 m/s - 5,3 m/s = -9,8 m/s² * t
(-5,3 m/s) / -9,8 m/s² = t
t = 0,54 s
The time it will take to reach the maximum height is 0,54 seconds.
A woman exerts a horizontal force of 3 pounds on a box as she pushes it up a ramp that is 10 feet long and inclined at an angle of 30 degrees above the horizontal. Find the work done on the box.
Answer: 67 how much candy does nick have
Explanation:
HELP NOW PLS !!
If you exert 950 N*s of impulse on a 12 kg frictionless cart over the course of 5 seconds, how far will it travel during those seconds?
Answer:
The value is [tex]s =197.88 \ m[/tex]
Explanation:
From the question we are told that
The impulse is [tex]I = 950 \ N\cdot s[/tex]
The mass is [tex]m = 12 \ kg[/tex]
The time t = 5 s
Generally impulse is mathematically represented as
[tex]I = F * t[/tex]
=> [tex]F = \frac{I}{t}[/tex]
=> [tex]F = \frac{950 }{ 5 }[/tex]
=> [tex]F = 190 \ N[/tex]
Generally force is mathematically represented as
[tex]F = m * a[/tex]
=> [tex]a = \frac{F }{ m }[/tex]
=> [tex]a = \frac{190 }{ 12 }[/tex]
=> [tex]a = 15.83 \ m/s^2[/tex]
Generally from kinematic equation , the distance covered is
[tex]s = ut + \frac{1}{2} * at^2[/tex]
Here u is the initial velocity of the cart and the value is [tex]u = m/s[/tex]
=> [tex]s = 0 * 5 + \frac{1}{2} * 15.83 * 5^2[/tex]
=> [tex]s =197.88 \ m[/tex]
Which type of circuit would be best to use for lights used for decorations? Question 1 options: Series circuit. One bulb could go out and the strand will stay on. Series circuit. One bulb could go out and the rest go out. Parallel circuit. One bulb goes out and the rest go out. Parallel circuit. One bulb could go out and the strand will stay on.
Answer:
One bulb could go out and the strand will stay on.
Explanation:
In series circuit, there is only one path provided for the current to flow. So, all the lights are required to be in working condition, for the others to work. And if anyone light bulb goes out, the circuit will become incomplete and the rest of the strand will also go out. Because there is only one path for current flow which is now broken.
On the other hand, in parallel circuits, each light bulb has a separate connection with the source. Current path to each bulb is independent of the others. Therefore, if one bulb goes out, the rest of the strand will stay on.
So, the correct option is:
One bulb could go out and the strand will stay on.