Answer:
70/100 X 2000 = 1400 tonnes of iron.
Explanation:
take the percentage of iron oxide and divide with overall amount of iron oxide using 2000 tonnes of hematite ore. 1400 tonnes of iron will be produced. this is not the percentage. if you want the percentage of iron produced just divide.
70/100 x 200 = 1400 tonnes of iron
percentage of iron produced = 70/1400 x 100 = 5 % of iron produced from 70% of iron oxide in 2000 tones of hematite ore
What effect does the Earth's surface have on solar radiation?
Answer:
Thus, the proportion of Earth's surface that is covered by ice and snow affects how much of the Sun's solar radiation is absorbed, warming the planet, or reflected. Therefore, snow and ice which are covered in soot from pollution no longer reflect sunlight, but absorb it and so melting increases.
Answer:
Half of the solar radiation is absorbed and converted to infrared (heat).
Explanation:
who is really good with chemistry and can help me with some questions/equations?
Answer:
I can help
Explanation:
i would appreciate it if someone could show me the net ionization reaction for the following equation:
CaCl2(aq) + 2NaHCO3 -> CaCO3 + 2NaCl + CO2 + H2O
thanks in advance!!
Answer:
Deduce the balanced chemical equation:
CaCO3(s) + 2HCl(aq) > CaCl2 + H2O(l) + CO2(g)
2. Write as ionic species:
Ca2+(aq) + CO3 2- (aq) + 2H+ + 2Cl- > Ca2+(aq)+ 2Cl-(aq) + H2O(l) + CO2(g)
3. Identify ions on the right that also appear on the left, and eliminate them. (As Robert Cruikshank says, these are known as ’spectator ions’ and take no overall part in the reaction):
CO3 2- (aq) + 2H+(aq) > H2O(l) + CO2(g)
This is the balanced ionic equation.
A 5.00 mL sample of hydrochloric acid is titrated with 0.1293 M ammonia (a base). If the titration required 28.15 mL of ammonia, determine the following:
the original concentration of the acid
the original pH of the acid
Answer:
1. C = 0.73 M.
2. pH = 0.14
Explanation:
The reaction is the following:
HCl + NH₃ ⇄ NH₄⁺Cl⁻
From the titration, we can find the number of moles of HCl that were neutralized by the ammonia.
[tex] n_{a} = n_{b} [/tex]
Where "a" is for acid and "b" is for base.
The number of moles is:
[tex] n = C*V [/tex]
Where "C" is for concentration and "V" for volume.
[tex] C_{a}V_{a} = C_{b}V_{b} [/tex]
[tex] C_{a} = \frac{0.1293 M*28.15 mL}{5.00 mL} = 0.73 M [/tex]
Hence the initial concentration of the acid is 0.73 M.
The original pH of the acid is given by:
[tex] pH = -log([H^{+}]) [/tex]
[tex] pH = -log(0.73) = 0.14 [/tex]
Therefore, the original pH of the acid is 0.14.
I hope it helps you!
is smoke a compound or a mixture? explain your answer.
Explanation:
hope it is helpful to you ☺️
This protein takes oxygen from hemoglobin in order to
O break down stored fats for energy.
O transport water-insoluble lipids in the bloodstream.
transport oxygen from the lungs to tissues around the body.
O store it for muscle cells.
Answer:
i'm pretty sure it's 'transport oxygen from the lungs to tissues around the body'
Answer:
Transportation of Oxygen from Lungs to Tissues
What is the pH of a solution that has a [OH^-] of 1x10^-2?
2
12
9
8
I'm like a highway system in your body. I carry necessary supplies to the parts of your body that need llen, allu
carry away wastes so your body can get rid of them. I contain blood vessels and am a system with a lot of heart.
What system am I?
1:digestive system
2:circulatory system
3: muscular system
4:skeletal system
plssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss sssssssssssssssssss sssssssssssssssssss sssssssssssssssssss sssssssssssssssssss answer this correctly
Answer:
The circulatory system
Explanation:
Hope this helps
What is the oxidation number of carbon in the compound carbon dioxide, CO2?
A) +3
B)+2
C)-3
D)+4
Answer:
the oxidation number is 4
zA 25.0 mL sample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 12.5 mL of the base is added. The concentration of acetic acid in the sample was ________ M. A 25.0 mL sample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 12.5 mL of the base is added. The concentration of acetic acid in the sample was ________ M. 0.365 0.119 0.0875 0.175 none of the above
Answer:
0.0875M of Acetic Acid
Explanation:
Based on the reaction of acetic acid (HX) with sodium hydroxide (NaOH):
HX + NaOH → NaX + H₂O
1 mole of acetic acid reacts with 1 mole of NaOH
That means the moles of sodium hydroxide added = Moles the acetic acid at the equivalence point.
To solve this question we have to find the moles of NaOH = Moles HX. With the moles and the volume (25.0mL = 0.0250L) we can find the molarity of the acetic acid:
Moles NaOH = Moles Acetic acid:
12.5mL = 0.0125L * (0.175mol / L) = 0.00219 moles Acetic Acid
Molarity acetic acid:
0.00219 moles Acetic Acid / 0.0250L =
0.0875M of Acetic AcidO nióbio é um metal encontrado em jazidas naturais, principalmente na firma de óxidos. Em uma jazida que contenha nióbio com número de oxidação +5, a formula do óxido predominante desse metal corresponde a:
Answer:
what
Explanation:
An apple appears red when struck by white light. This appearance is because the red light is reflected and the other colors are absorb. What color will this apple appear to be when struck by blue yet.
A. black
B. blue
C. red
D. white
31. A mixture with sand, pink sugar and water would be best separated using
Answer:
Filtration and evaporation
Explanation:
A mixture of sand, pink sugar and water can be separated by filtration and evaporation.
The pink sugar is already dissolved in the water but the sand remains undissolved in the water hence it can be filtered off. The filtrate now contains the sugar.
The sugar is obtained from the filtrate by evaporation of the solution to yield the solid pink sugar and steam which can be condensed again to give liquid water.
What is the mass number and atomic number of Ca0
Answer:
56.0774g/mol
Explanation:
hope you like it ☺️
(1) Complete the word equation for the complete combustion of methane in
oxygen.
→ water +
methane +
en of methane can produce carbon and
Cooled in ice to help the water vapour condense. Tube 2 – contains lime water, goes cloudy to show the presence of carbon dioxide. Word equation: (hydrocarbon + oxygen → carbon dioxide + water) Methane + oxygen → carbon dioxide + water.
Match each chemical reaction with the type of reaction that best describes it
Explanation:
Types of Chemical ReactionCombination Reaction.Decomposition Reaction.Displacement Reaction.Double Displacement Reaction.Oxidation and Reduction Reaction.stay safe healthy and happy.What does the line with “alternating spikes and semicircles” mean?
Answer:
The line with spikes and semicircles is a stationary front, it brings days of steady rain.
Explanation:
L means Low pressure, it brings stormy weather with strong winds.
H means High pressure, it brings fair weather and light winds.
The line with spikes is a cold weather front, it brings thunderstorms and colder
temperatures.
The line with spikes and semicircles is a stationary front, it brings days of steady rain.
Identify the element that cannot participate in nuclear fission reactions. (Hint: Think about the size of the atom.)
A.
hydrogen
B.
uranium
C.
thorium
D.
plutonium
What are the different types of excretion?
Answer:
There are 4 excretory organs in human: The skin, the lungs, the liver, and the kidney (Urinary system). The skin excretes the sweat outside the body through numerous pores in the surface of this organ. Sweat is a mixture of three metabolic wastes: water, salts, and urea.
In the chemical laboratory, why do scientists use a mortar and pestle?
A. To increase surface area of a solute
B. To decrease surface area of a solute
C. To increase temperature of a solute
D. To decrease temperature of a solute
Answer:
A. To increase surface area of a solute
Explanation:
What is the state of matter involved in a solution and colloid
Explanation:
colloid is a mixture in which one substance of microscopically dispersed insoluble particles are suspended throughout another substance. However, some definitions specify that the particles must be dispersed in a liquid,[1] and others extend the definition to include substances like aerosols and gels. The term colloidal suspension refers unambiguously to the overall mixture (although a narrower sense of the word suspension is distinguished from colloids by larger particle size). A colloid has a dispersed phase (the suspended particles) and a continuous phase (the medium of suspension). The dispersed phase particles have a diameter of approximately 1 nanometre to 1 micrometre.[
hope it helps.
Answer:
colloids are mixtures in which one or more substances are dispersed as relatively large solid particles or liquid droplets throughout a solid ,liquid or gaseous medium .The particles of a colloid remain and do not settle due to gravity ,and they are often electrically charged
hope it helpedcan some kind soul help me plss
convert propanamine to propylalcohol
Answer:
Yeah
Explanation:
Propylene glycol can be dehydrated to propionaldehyde which can in turn be reductively aminated to propylamine.
Propionaldehyde can be converted to n-propyl amine in two steps.
Conversion of propionaldehyde to oxime
Propionaldehyde is treated with hydroxyl amine in weakly acidic medium to form imine product known as propionaldoxime.
CH₃CH₂CHO+NH₂OH->CH₃CH₂CH=N-OH+H₂O
Reduction of imine to form amine
In this step,propionaldoxime is reduced by proper reducing agent like Na in ethanol to form n-propyl amine.
CH₃CH₂CH=NO-Na-C₂H5OH-> CH₃CH₂CH₂NH₂
If you were to add salt to water , what temperature would you expect it to boil? Assume you’re at sea level
100 c
More than 100 c
Less than 100 c
Answer:
100c
Explanation:
Alternative fuel sources such solar and wind energy are gaining popularity and replacing fossil fuels in many applications. While there are many positive benefits to this technology, what negative impacts do they present?
Answer:
Environmental limitations.
Explanation:
The nonrenewable sources of energy include coal, oil natural gas, and nuclear power. While the renewable source of energy include tidal, solar, geothermal, and wind power. All the sources of nonrenewable energy are called fossil fuels. There are many positives of this alternate energy such as clean and clear energy. Though there may be some negative impacts such as land use changes for setting up solar panels, and windmill farms. These techniques are costly to maintain and implement in all sectors.Explain how the percentages of nitrogen , oxygens and carbon dioxide in the earth atmosphere today have changed from the earth
Answer:
See below
Explanation:
The atmosphere of the earth hundreds of millions of years ago was only water vapour and carbon, both from the one ocean that existed around the continental body of Pangea. The photosynthesis process and exache (⊕) caused the percentages to decrease.
This refers to the most powerful means of communicating confidence and conviction A.Posture B.eye contact C.body movement
please
please
please
please
ples
please
please
please help me
Answer:
c
Explanation:
the way you move explains how confident you are
The specific heat capacities of some metals (in J g−1 K−1) are given below. Copper: 0.385 Magnesium: 1.020 Mercury: 0.138 Platinum: 0.130 If 100 kJ of heat is added to 10.0 g samples of each of the metals above, all at 25°C, determine which metal will have the smallest increase in temperature.
Answer: Magnesium metal will have the smallest increase in temperature.
Explanation:
Given: Specific heats are as follows.
Copper = 0.385 J/g K, Magnesium = 1.020 J/g K
Mercury = 0.138 J/g K, Platinum = 0.130 J/g K
Heat energy = 100 kJ (1 kJ = 1000 J) = 100000 J
mass = 10.0 g
Initial temperature = [tex]25^{o}C[/tex]
Formula used to calculate the increase in temperature for each of the given elements is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass
C = specific heat
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
The change in temperature for copper is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.385 J/g K \times (T_{2} - 25)\\T_{2} = 25999.026^{o}C[/tex]
The change in temperature for magnesium is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 1.020 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 9828.92^{o}C[/tex]
The change in temperature for mercury is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.138 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 72488.77^{o}C[/tex]
The change in temperature for platinum is calculated as follows.[tex]q = m \times C \times (T_{2} - T_{1})\\100000 = 10.0 g \times 0.130 J/g K \times (T_{2} - 25)^{o}C\\T_{2} = 76948.08^{o}C[/tex]
Thus, we can conclude that magnesium metal will have the smallest increase in temperature.
A cylinder is labeled \"PENTANE.\" When the gas inside the cylinder is monochlorinated, five isomers of formula C5H11Cl result. Was the gas pure n-pentane, pure isopentane, pure neopentane, or a mixture of two or all three of these?
Answer:
a mixture of two these
Explanation:
The number of isomeric monochlorides depends on the structure and number of equivalent hydrogen atoms in each isomer of pentane.
n-pentane has three different kinds of equivalent hydrogen atoms leading to three isomeric monochlorides formed.
Isopentane has four different types of equivalent hydrogen atoms hence four isomeric monochlorides are formed.
Lastly, neopentane has only one type of equivalent hydrogen atoms that yields one mono chlorination product.
Hence the cylinder must contain a mixture of isopentane and neopentane which yields four and one isomeric monochlorides giving a total of five identifiable monochloride products as stated in the question.
Please help!!!! Best answer will get brainliest
Answer:
covalent network
Explanation:
trust me on this one
At 40 mph, how long does it take to travel 64 miles