is a fuel cell a primary or secondary cell

Answer: A , D & F

Explanation:

This problem is describing a pump from which water is discharged at 1 MPa and 165 °C and is asking for the specific volume and internal energy at those conditions, thus, we can use the steam tables for resolving this requirement.

First of all, we need to remember that water can be a saturated liquid, vapour or liquid-vapour mixture, and this is determined for the temperature and pressure it is at.

In this case, we find that at 165 °C the saturation pressure is about 0.6178 MPa; this means we are referring to a saturated liquid so that both the specific volume and internal energy can be simply read from the steam tables as vf and uf as follows:

[tex]v=0.001127\frac{m^3}{kg}\\\\u=761.67 \frac{kJ}{kg}[/tex]

Learn more:

Answer: for part A Its A the ANSWER for part B its D

Explanation:

Answer:

a and b

Explanation:

Answer:

626m

Explanation:

The angular speed of the merry-go-round reduced more as the sandbag is

placed further from the axis than increasing the mass of the sandbag.

The rank from largest to smallest angular speed is presented as follows;

[m = 10 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 20 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 1.0·R]

Reasons:

The given combination in the question as obtained from a similar question online are;

1: m = 20 kg, r = 0.25·R

2: m = 10 kg, r = 1.0·R

3: m = 10 kg, r = 0.25·R

4: m = 15 kg, r = 0.75·R

5: m = 10 kg, r = 0.5·R

6: m = 40 kg, r = 0.25·R

According to the principle of conservation of angular momentum, we have;

[tex]I_i \cdot \omega _i = I_f \cdot \omega _f[/tex]

The moment of inertia of the merry-go-round, [tex]I_m[/tex] = 0.5·M·R²

Moment of inertia of the sandbag = m·r²

Therefore;

0.5·M·R²·[tex]\omega _i[/tex] = (0.5·M·R² + m·r²)·[tex]\omega _f[/tex]

Given that 0.5·M·R²·[tex]\omega _i[/tex] is constant, as the value of  m·r² increases, the value of [tex]\omega _f[/tex] decreases.

The values of m·r² for each combination are;

Combination 1: m = 20 kg, r = 0.25·R; m·r² = 1.25·R²

Combination 2: m = 10 kg, r = 1.0·R; m·r² = 10·R²

Combination 3: m = 10 kg, r = 0.25·R; m·r² = 0.625·R²

Combination 4: m = 15 kg, r = 0.75·R; m·r² = 8.4375·R²

Combination 5: m = 10 kg, r = 0.5·R; m·r² = 2.5·R²

Combination 6: m = 40 kg, r = 0.25·R; m·r² = 2.5·R²

Therefore, the rank from largest to smallest angular speed is as follows;

Combination 3 > Combination 1 > Combination 5 = Combination 6 >

Combination 2

Which gives;

[m = 10 kg, r = 0.25·R] > [m = 20 kg, r = 0.25·R] > [m = 10 kg, r = 0.5·R] > [m =

10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R] > [m = 10 kg, r = 1.0·R].

Learn more here:

https://brainly.com/question/15188750

Answer:

b Shiny

Explanation:

Trust me it's right

Answer:

Explanation:

s = s₀ + v₀t + ½at²

50 = 0 + 0(4) + ½a(4²)

50 = 8a

a = 50/8 = 6.25 m/s²

Hi there!

A.

We can calculate the gravitational field strength using the following equation:

[tex]g = \frac{Gm_p}{r^2}[/tex]

G = Gravitational Constant

mp = mass of planet (kg)

r = radius (m)

Plug in the given values:

[tex]g = \frac{(6.67*10^{-11})*(5.68*10^{24})}{(6.03*10^7)^2} = \boxed{0.104 N/kg}[/tex]

B.

The force can be calculated using:

[tex]F_g = \frac{Gm_1m_2}{r^2}[/tex]

Plug in the values:

[tex]F_g = \frac{(6.67*10^{-11})(5.68*10^{24})(50)}{(6.04*10^7)^2} = \boxed{5.209N}[/tex]

Answer:

[tex]\boxed {\boxed {\sf g=0.104 \ N/kg \ and \ F_g= 5.2 \ N }}[/tex]

Explanation:

A. Gravitational Field Strength

The gravitational field strength can be calculated using the following formula:

[tex]g= \frac{Gm}{r^2}[/tex]

G, or the universal gravitational constant, is 6.67 × 10⁻¹¹ N*m²/kg². The mass of Saturn is 5.68 × 10²⁴ kilograms. The radius of Saturn is 6.03×10⁷ meters.

Substitute these values into the formula.

[tex]g= \frac{ (6.67 \times 10^{-11} \ N*m^2/kg^2) (5.68 \times 10^{24} \ kg)}{(6.03 \times 10^{7} \ m )^2}[/tex]

Multiply the numerator and square the denominator.

[tex]g= \frac{ 3.78856 \times 10^{14} \ N *m^2/kg }{3.63609 \times 10^{15} \ m^2}[/tex]

Divide.

[tex]g= 0.1041932405 \ N/kg[/tex]

The original measurements of mass and radius have 3 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 1 in the ten-thousandth place tells us to leave the 4 in the thousandth place.

[tex]\boxed {g \approx 0.104 \ N/kg}[/tex]

B. Force of Gravity

The force of gravity is calculated using the following formula:

[tex]F_g= mg[/tex]

The mass of the object is 50 kilograms. We just calculated the gravitational field strength, which is 0.104 Newtons per kilogram. Substitute these values into the formula.

[tex]F_g= (50 \ kg)(0.104 \ N/kg)[/tex]

Multiply. The units of kilograms cancel.

[tex]\boxed {F_g=5.20 \ N}[/tex]

What is the acceleration of the cart at t=8 seconds?

Hence the answer us letter a) 0 m/s^2.

That's all I know, Hope it help :)

Answer:

Explanation:

The deflection of a charged particle by a magnetic field is proportional to its electric charge and to its velocity.   The deflection is also inversely proportional to its mass.   So given a proton and an electron going at the same velocity in a magnetic field and having equal (but opposite) electric charge the electron will deflect much more since the ratio of the masses is 1836.

The answer is C) kilogram

The SI unit in the given options is kilogram, the correct option is C.

The most common unit of measurement is the standard unit. These units are standardized, which means that everyone understands an object's size, weight, and other properties.

Standard Units of Measurement have fixed values that cannot be changed.

The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system.

The SI is a coherent system of units of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), and so on.

Thus, the correct option is C.

For more details regarding SI units, visit:

https://brainly.com/question/12750330

#SPJ2

Answer:

Explanation:

0.120 rev/s(2π rad/rev) = 0.24π rad/s

At the highest point of the arc, gravity must supply the required centripetal acceleration. As the normal force is 1/4 of his normal weight, then 3/4 of gravity acceleration must be used as centripetal acceleration

0.75g = ω²R

R = 0.75(9.81) / (0.24π)²

R = 12.942198...

R = 12.9 m

The radius of the circle is equal to 12.95m which is rotating with an angular velocity of 0.120 rev/s.

A body spins in a vertical circle so that its motion at different points is different from the motion of the body is said to be vertical circular motion.

The velocity and tension vary in maximum magnitude from the lowest to the highest position because of the effect of the gravitational force of the earth.

Given, the angular velocity of the Ferris wheel, ω = 0.120 rev/s

ω = 0.120 rev/s × 2π rad/rev

ω= 0.7536 rad/s

If r is the radius of the circle and 'm' is the mass of the jack.

From newton's second law of motion, the net force will be equal to

mg - N = mrω²

mg - (mg/4) = mrω²

r = 3g/4ω²

r = 3×9.81 / (4× 0.7536)

r = 12.95 m

Therefore, the radius of the circle in which the jack travels is equal to 12.95m.

Learn more about vertical circular motion, here:

https://brainly.com/question/22810476

#SPJ2

Your question is incomplete, most probably the complete question was,

Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.120 rev/s. As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight. What is the radius of the circle in which Jack travels?

Find the distance the ball travels:

3.4 meters - 1.5 meters = 1.9 meters

Now divide the distance the ball travels by the speed:

1.9 meters / 4.4 m/s = 0.43 seconds

Answer:

Explanation:

s = s₀ + v₀t + ½at²

There are an infinite number of solutions to this question as posed because we are not told the direction of the initial velocity.

Assuming ground is level and origin and UP the positive direction

The shortest amount of time possible is when the initial velocity is straight down

1.5 = 3.4 - 4.4t + ½(-9.8)t²

0 = -4.9t² - 4.4t + 1.9

t = (4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))

positive answer is

t = 0.32 s

The longest amount of time possible is when the initial velocity is straight up.

1.5 = 3.4 + 4.4t + ½(-9.8)t²

0 = -4.9t² + 4.4t + 1.9

t = (-4.4 ±√(4.4² - 4(-4.9)(1.9))) / (2(-4.9))

positive answer

t = 1.22 s

If the initial velocity is horizontal, meaning no vertical velocity

1.5 = 3.4 + 0t + ½(-9.8)t²

-4.9t² = -1.9

t² = 0.38775...

t = 0.62 s

Any angle between UP and Down will have a different initial vertical velocity and result in a different time to catch height.

It appears from the comments on the other answer, that I have shown you how to arrive at three of the four possible solutions.  The initial direction is very important.

Answer:

The Aluminum

Explanation:

With a larger specific heat, water requires more heat to raise its temperature by a temperature degree.

In this system, with equal masses of water and aluminum, the heat moving from the aluminum lowering its temperature by one degree is not sufficient to raise the water temperature by one degree.

Answer:

Explanation:

Radio waves

Radio waves have photons with the lowest energies. Microwaves have a little more energy than radio waves. Infrared has still more, followed by visible, ultraviolet, X-rays and gamma rays.

Answer:

how many feet?

Explanation:

Answer:

Small particles of dust and pollution in the air can contribute to (and sometimes even enhance) these colors, but the primary cause of a blue sky and orange/red sunsets or sunrises is scattering by the gas molecules that make up our atmosphere. Large particles of pollution or dust scatter light in a way that changes much less for different colors.

Explanation:

The energy in the system is given by the initial potential energy at the point 1.

The linear velocity at point 3, is approximately 33.59 m/s.

Reasons:

The parameters are;

Height at point 1, h₁ = 83 m

Radius of the ring = 8 cm

Mass of the ring, M = 8 kg

Height at point 2, h₂ = 32 m

At point 2, we have;

Change in potential energy = Kinetic energy

Which gives;

(83 - 32) × 9.81 × 8 = 0.5 × 8 × v² + 0.5 × 8 × 0.08² × (v/0.08)²

Which gives;

v ≈ 22.37 m/s

At point 3, the rotational kinetic energy remains constant while the

translational kinetic energy increases as follows;

K.E. at point 3 = Initial kinetic energy + Change in potential energy

Which gives;

K.E. at point 3 = 0.5 × 8 × v₃³ ≈ 0.5×8×22.37² + 32×9.81×8

[tex]v_3^2 = \dfrac{0.5 \times 8 \times 22.37^2 + 32 \times 9.81 \times 8}{0.5 \times 8} = 1128.15[/tex]

v₃ ≈ √(1128.15) ≈ 33.59

The linear velocity at point 3, v₃ ≈ 33.59 m/s

Learn more here:

https://brainly.com/question/15076457

The probable question parameters as obtained from a similar question online are;

Height at point 1, h₁ = 83 m

Radius of the ring = 8 cm

Mass of the ring, M = 8 kg

Height at point 2, h₂ = 32 m

(a) The height of the roller coaster at 120,000 potential energy is 122.45 m.

(b) The velocity of the roller coaster at 0 J kinetic energy is 0.

(c) The height of the roller coaster at 60,000 potential energy is 61.23 m.

(d) The velocity of the roller coaster at 60,000 J kinetic energy is 34.64 m/s.

(e) The height of the roller coaster at 40,000 potential energy is 40.82 m.

(f) The velocity of the roller coaster at 80,000 J kinetic energy is 40 m/s.

The given parameters:

When the kinetic energy = 0 and potential energy = 120,000 J

The height of the roller coaster is calculated as follows;

P.E = mgh

[tex]h = \frac{P.E}{mg}\\\\h = \frac{120,000}{100 \times 9.8} \\\\h = 122.45 \ m[/tex]

Since the kinetic energy = 0, the velocity of the roller coaster = 0

When the potential energy, P.E = 60,000 J, the kinetic energy, K.E is calculated as;

P.E + K.E = M.A

P.E + K.E = 120,000

60,000 + K.E = 120,000

K.E = 120,000 - 60,000

K.E = 60,000 J

The height of the roller coaster at 60,000 potential energy is calculated as follows;

[tex]h = \frac{P.E}{mg} \\\\h = \frac{60,000}{100 \times 9.8} \\\\h =61.23 \ m[/tex]

The velocity of the roller coaster at 60,000 J kinetic energy is calculated as follows;

[tex]K.E = \frac{1}{2} mv^2\\\\v^2 = \frac{2K.E}{m} \\\\v = \sqrt{ \frac{2K.E}{m}} \\\\v = \sqrt{ \frac{2\times 60,000}{100}}\\\\v = 34.64 \ m/s[/tex]

When the potential energy, P.E = 40,000 J, the kinetic energy, K.E is calculated as;

P.E + K.E = M.A

40,000 + K.E = 120,000

K.E = 120,000 - 40,000

K.E = 80,000

The height of the roller coaster at 40,000 potential energy is calculated as follows;

[tex]h = \frac{P.E}{mg} \\\\h = \frac{40,000}{100 \times 9.8} \\\\h = 40.82 \ m[/tex]

The velocity of the roller coaster at 80,000 J kinetic energy is calculated as follows;

[tex]v = \sqrt{\frac{2K.E}{m} } \\\\v = \sqrt{\frac{2\times 80,000}{100} } \\\\v = 40 \ m/s[/tex]

Learn more here:https://brainly.com/question/19969393

. Power

Patintero

, also known as harangang-taga or tubigan, (Intl. Translate: Escape from the hell or Block the runner) is a traditional Filipino children's game. Along with tumbang preso, it is one of the most popular outdoor games played by children in the Philippines.[1]

is an ultramarathon trail race held in Frozen Head State Park near Wartburg, Tennessee. If runners complete 60 miles (97 km) this is known as a "fun run." The full course is about 100 miles (160 km). The race is limited to a 60-hour period and takes place in late March or early April of each year.

Answer:

At the highest point when you toss a ball into the air.

Explanation:

At the higest point of a trajectory of a ball, the velocity is zero for a split second and there is no speed and direction. However, there still is acceleration of -10 m/s^2 because the force of gravity is still acting upon it at that point.

Hi there!

An example of this could be when a ball is thrown vertically into the air and reaches the TOP of its trajectory.

When an object is thrown with a vertical velocity, the acceleration due to gravity results in a decrease in its positive (upward) velocity until it reaches its highest point, where the instantaneous velocity = 0 m/s and the object begins to fall back down (negative velocity).

Additionally, throughout its entire trajectory, the ball experiences an acceleration due to gravity of g = 9.8 m/s², even at its highest point where there is a velocity = 0 m/s.

The self-inductance of the solenoid is 8.25 mH.

The given parameters;

The area of the solenoid is calculated as follows;

[tex]A = \pi r^2\\\\A = \pi \times (0.02)^2\\\\A = 0.00125 \ m^2[/tex]

The self-inductance of the solenoid is calculated as follows;

[tex]L = \frac{\mu_o N^2 A }{l} \\\\L = \frac{(4\pi \times 10^{-7}) \times 1700^2 \times 0.00125}{0.55} \\\\L = 0.00825 \ H\\\\L = 8.25\ mH[/tex]

Thus, the self-inductance of the solenoid is 8.25 mH.

Learn more here:https://brainly.com/question/15612168

Answer:

Explanation:

I've been doing these types of problems for many years and I don't think I've ever seen an "efficiency" rating on a ramp.

I'm going to ASSUME that 20% efficient means that 80% of the Potential energy that gets converted becomes system internal heat energy.

Potential energy at the start of a 2.0 m slide

PE = mgh = mg2sin30 = mg2(½) = mg J

0.8mg J gets converted to heat and 0.2mg converts to kinetic energy

0.2mg = ½mv²

v² = 0.4g

v = √(0.4(9.8)) = 1.979898... ≈ 2.0 m/s

Answer:

everything will float up and go up to space and die

Explanation:

gravity keeps us down and once it stops everything will float up. And if it were to stop everywhere everything and everyone will die and everything will be destroyed.

Answer:

Instrument Use

Accelerometer Measures acceleration

Altimeter Measures altitude of an aircraft

Ammeter Measures electric current in ampere

Anemometer Measures wind speed

Answer:

it would decrease

Explanation:

f=1/T

Answer:

Explanation:

F = ma

a = F/m

a = mBg / (mB + mA)

a = 3.5(9.8)/(3.5 + 3.4)

a = 4.971014...

a = 5.0 m/s²

If you want to use individual Free Body Diagrams

mass A will have downward weight and upward normal forces equal at mAg

and a horizontal force of string tension T

F = ma

T = mAa

mass B will have a downward force of mBg and an upward force of T

mBg - T = mBa

substitute for T

mBg - mAa = mBa

mBg = a(mB + mA)

a = mBg / (mB + mA)   which is identical to the above answer.

Answer:

In this problem basically we will use directions to find displacement and distance .

(Keep in mind that displacement is vector while distance is scalar quantity)  

And then we will use displacement and distance to find average velocity and average speed.

Explanation: