Julia sorted candies and found there were
10 each of these colors: green, red, and
pink and 20 blue in the package. Which
answer matches the percentage, decimal
and fraction of the blue candies in the
package?

F 20%, .2, 1/5
G 30%, .3, 3/10
H 40%, .4, 2/5
J 50%, .5, 1/2

x² + x² = 4

2x² = 4

x² = 2

x=√2

hope it helps

The linear equation of the line would be y = 7/5x. The number of loaves of bread from 85 pounds of flour would be 7/5(85) = 119 loaves.

Each term in a linear equation has an exponent of 1, and when this algebraic equation is graphed, it always produces a straight line. It is called a "linear equation" for this reason.

Slope calculation:

This line's slope would be the proportional constant.

This point (35, 49) is extremely near to the lines that would result in the linear constant 49/35 = 7/5 , the line's equation is y = (7/5)x .

Using 85 pounds of flour, Calculate the loaves of bread that may be made (7/5) * 85 = 119 loaves.

Therefore, the equation is y = (7/5)x that is used to forecast the number of loaves that could be created from 85 pounds of flour, and the result was 119 loaves.

To learn more about linear equation visit:

brainly.com/question/13738061

#SPJ1

The complete question is:

A bakery makes small batches of bread daily. Each day, the bakery records the amount of flour used the number of loaves of bread made. All loaves are approximately the same size. The table and graph show the bakery’s data for five days.

write an equation that can be used to model the number of loaves of breast, y that can be made from x pounds flour

Use an equation to predict the number of loaves that can be made from 85 pounds of flour show your work or explain your answer

Answer: I am Not that good In Maths But here you go

Step-by-step explanation:

Part A:

The population of a city in 2015 is 36,000 and it is increasing at 15% per year. We can model this using an exponential equation of the form:

P(z) = P0 * (1 + r)^z

Where:

P(z) is the population after z years

P0 is the initial population in 2015 (36,000)

r is the rate of growth (0.15)

z is the number of years since 2015

So the exponential equation that models the population is:

P(z) = 36,000 * (1 + 0.15)^z

Part B:

To find the population in 2020, we would substitute z = 5 (2020 - 2015) into the equation:

P(5) = 36,000 * (1 + 0.15)^5

P(5) = 36,000 * 1.15^5

Calculating this gives us a population of approximately 63,746 in 2020.

To obtain this answer, we used the exponential equation that models the population, P(z), where a represents the number of years since 2015, with the given information that population in 2015 was 36,000 and it's increasing at 15% per year and substitute the value of 5 for z.

Answer:

0.8

Step-by-step explanation:

.40 / 100x200

Arithmetic operations on the directed numbers gives;

7) -7

8) +73

9) - 8

10) + 1

Any given number which has either a positive or negative sign is a directed number. Thus all numbers are directed in one way or the other. Some examples are: 8, +2, - 8.35, 10, 520 etc.

Performing an arithmetic operations on the given question, we have;

7) +9 - + 16 = +9 -(+16)

applying the rule of signs

+9 - (+16) = + 9 - 16

              = -7

8) +85 - + 12 = +85 - (+12)

applying the rule of signs

+85 - (+12) = +85 - 12

                 = +73

9) -6 - 2

applying the rule of signs

-6 -2 = -8

10) +13 - + 12 = +13 - (+12)

applying the rule of signs

+13 - (+12) = +13 - 12

                = +1

Learn more about directed numbers at https://brainly.com/question/29257646

#SPJ1

At the same rate, a machine take 44 hours until the drill reaches its final depth of −132 feet.

Any relationship that is always in the same ratio and quantity which vary directly with each other is called the proportional.

We have to given that;

A machine that drills holes for wells drilled to a depth of−72 feet in one day (24 hours).

Now, Let a machine drill holes reaches its final depth of −132 feet in x hours.

Hence, By definition of proportion, we get;

⇒ 72 / 24 = 132 / x

⇒ x = 132 × 24 / 72

⇒ x = 3,168 / 72

⇒ x = 44 hours

Thus, It take 44 hours to reaches its final depth of −132 feet.

Learn more about the proportion visit:

https://brainly.com/question/1496357

#SPJ1

Answer:

3000

Step-by-step explanation:

Answer:

Answer:

$1,392

Step-by-step explanation:

1,200(0.08)(2) = 192

1,200 + 192 = $1,392

Step-by-step explanation:

Answer:

absolutely

Step-by-step explanation:

Needs are for survival in life like food, rent or mortgage, utilities, and other expenses.  Transportation costs, insurance coverage, and any clothing and tools you need for work are included in this part of your budget.  A want includes expenses that you can comfortably live without and is not essential for survival.

The  required single payment is required to settle both debts in one month is $4071.26.

Simple interest is the amount of interest charged on a specific pripal amount at a specific interest rate. Compound interest, on the other hand, is the interest that is computed using both the principal and the interest that has accumulated over the preceding period.

We have,

Interest of 12 month = 6.30%

For one month = 6.30/12

= 0.525% per month

Total debt =  $2,100 +  $1,950

Total debt = $4050

Interest of one month = 0.525% of $4050

= $21.26

Net debt = $4050 + $21.26.

Thus, required single payment is required to settle both debts in one month is $4071.26.

To know more about Dollar visit:

brainly.com/question/29846475

#SPJ1

Answer:

C

Step-by-step explanation:

C. √2, √6,2√2 are not the lengths of the sides of a 30°-60°-90° triangle.

In a 30°-60°-90° triangle the ratio of the sides are always the same, the hypotenuse is twice the length of the shorter leg, and the longer leg is √3 times the length of the shorter leg.

A. 1/2, √3/2, 1 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 1, the longer leg is 1√3=√3 and the hypotenuse is 12=2.

B. 5/2, 5√3/2, 10 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 5/2, the longer leg is (5/2)*√3=5√3/2 and the hypotenuse is (5/2)*2=5

D. 3,3√3,6 are the lengths of the sides of a 30°-60°-90° triangle. As the shorter leg is 3, the longer leg is 3√3=3√3 and the hypotenuse is 32=6

So, option C is not the lengths of a 30°-60°-90° triangle.

Answer:

12345678901234567890

The flux of the vector field F is the integral of the normal component of the vector field over the surface.

The flux of the vector field F is the integral of the normal component of the vector field over the surface. In this case, the surface is the circle with radius r centered at the origin and the normal component of the vector field is just the z-component, which is equal to 2x. The integral of the normal component of the vector field over the circle is given by

Φ = ∫C 2x ds = ∫0 2π r2 2cosθ dθ

= 4πr2

This is the flux of the vector field F coming out of the circle.

Learn more about vector field here:

https://brainly.com/question/28168976

#SPJ4

a) The percentage of pregnancies should last between 269 and 282 days is 18%

b) The days should the longest 10% of all pregnancies last is 291 days.

c) According to the Central Limit Theorem, the distribution of this sample mean is 265. The model is a Normal model, and standard deviation is 17/(√(67)).

d) The probability that the mean duration of these patients' pregnancies will be less than 258 days is 0.03 or 3%

a) To find the percentage of pregnancies that should last between 269 and 282 days, we need to find the proportion of the area under the normal distribution curve that falls between those two values. This can be done using a standard normal table or calculator. Using a calculator, we find that the proportion of the area under the curve between 269 and 282 days is approximately 0.18 (or 18%).

b) To find the longest 10% of all pregnancies, we need to find the duration that corresponds to the 90th percentile. We can use the standard normal table or calculator to find that the duration that corresponds to the 90th percentile is approximately 291 days.

c) According to the Central Limit Theorem, the distribution of the sample mean, y, is a normal distribution with a mean of 265 days (the population mean) and a standard deviation of 17/(√(67)) days. So the model is a Normal model with mean 265 and standard deviation 17/(√(67))

d) To find the probability that the mean duration of these patients' pregnancies will be less than 258 days, we need to find the proportion of the area under the normal distribution curve that falls to the left of 258 days. Using a calculator, we can find that the proportion of the area under the curve to the left of 258 days is approximately 0.03 (or 3%).

Therefore, the correct answers are as given above

learn more about central limit theorem: https://brainly.com/question/17092136

#SPJ1

Answer: -4(3y+4)

Step-by-step explanation:

First I found the Great common divisor (-4) and took that number and divided -12y and -16 with it getting 3y and 4 and then I set it up as if I was trying to get -12y and -16 so the best way to do that is to use the distributive property so I put 3y and 4 in parentheses like this (3y+4) then I added the -4 on to get the answer of -4(3y+4)

[tex]\huge\text{Hey there!}[/tex]

[tex]\mathsf{-12y - 16}[/tex]

[tex]\large\text{Let us look for the GCF for each of your numbers because it can}\\\large\text{make this equation somewhat easier to solve.}[/tex]

[tex]\mathsf{-12x \rightarrow -1, -2, -3, -4, -6, -12, \ \& \ -x}\\\\\mathsf{-16 \rightarrow -1, -2, -4, -8, \& -16}\\\\\large\text{Thus, your GCF for both of your numbers is: \boxed{- 4 }}\large\checkmark[/tex]

[tex]\large\text{So, let us put }\rm{-4}\large\text{ in front of your parentheses because we had to factor}\\\large\text{out the common like term they shared together.}[/tex]

[tex]\large\text{Now simplify it furthermore}[/tex]

[tex]\huge\text{This leaves your answer as:}[/tex]

[tex]\huge\boxed{\mathsf{-4(3y + 4)}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

If a balloon was originally filled to a volume of 4,400 cubic centimeters. The inequality expression of the volume of the balloon is: V < 4400.

Volume = 4,400 cubic centimeters

Since the air inside the balloon leaks out over time which implies that the air inside the balloon will reduce.

So the expression is:

V < 4400

Where:

V = Volume

< = less than

Therefore the  inequality expression is V < 4400.

Learn  more about inequality expression here:https://brainly.com/question/25275758

#SPJ1

The complete question is:

A balloon was originally filled to a volume of 4,400 cubic centimeters. Air inside the balloon leaks out over time.

Write an inequality that describes V, the volume of the balloon in cubic centimeters as air leaks out.

Enter your inequality without a thousands separator.

The solution for x is x = -2 + sqrt(17) and x = -2 - sqrt(17) will give the brainliest.

What is the quadratic equation?

A quadratic equation is a type of polynomial equation of degree 2, that can be written in the form of ax^2 + bx + c = 0 where x is the variable, a,b,c are constant and a is not equal to zero.

To solve for x in the equation 9/(x+4) = 2x, we can first clear the fractions by multiplying both sides of the equation by (x+4). This gives us:

9 = 2x*(x+4)

Then we can simplify the right side of the equation:

9 = 2x^2 + 8x

Next, we can move all the x terms to one side of the equation and all the constants to the other side:

2x^2 + 8x - 9 = 0

Now we can use the quadratic formula to solve for x:

x = (-b +/- sqrt(b^2 - 4ac)) / 2a

where a = 2, b = 8, and c = -9

So we have:

x = (-8 +/- sqrt(8^2 - 42-9)) / 2*2

x = (-8 +/- sqrt(64 + 72)) / 4

x = (-8 +/- sqrt(136)) / 4

x = (-8 +/- 4*sqrt(17)) / 4

x = (-2 +/- sqrt(17))

So the solutions for x are x = -2 + sqrt(17) and x = -2 - sqrt(17)

The solution for x is x = -2 + sqrt(17) and x = -2 - sqrt(17) will give the brainliest.

To learn more about quadratic equation, Visit

https://brainly.com/question/1214333

#SPJ1

(A). Yes, overdetermined systems can be consistent.

As, the system of equations below is consistent because it has a solution

x1 = 2 , x2 = 4 , x1 + x2 = 6.

We have,

'Over-determined system is a system of linear equations, in which there are more equations than unknowns'.

If we have m equations and n variables where m>n (more equations than variables), then system can be consistent if last m−n equations are linear combinations of previous ones.

For e.g. Let us consider the system,

x + y = 1

x - y = 1

3x + y = 3

solving these equations, we can see

The only intersection point is (1,0). Thus, x= 1 and y= 0 is the solution of this system.

Thus, over-determined system can be consistent.

According to the options,

Hence, option A is correct.

Learn more about overdetermined systems here :

https://brainly.com/question/13161359

#SPJ4

Answer:

1650

Step-by-step explanation:

1732.5 / (1+5%) = 1732.5 / 1.05 = 1650

There were 64 students who had taken a mathematics course. Of those 64, 28 had also taken a business course, and 26 had also taken a computer science course. This leaves 10 students who had taken only a mathematics course.

To calculate this, we start by subtracting the number of students who had taken all three courses (14) from the total number of students who had taken a mathematics course (64).

Then we subtract the number of students who had taken both a mathematics and a business course (28) and the number of students who had taken both a mathematics and a computer science course (26) from the result. This gives us 10 students who had taken only a mathematics course.

To know more about mathematics here

https://brainly.com/question/27235369

#SPJ4

B must have 2n subsets since it has two corresponding subsets for each subset of A series  (S1, S2,..., Sa), one of which contains the extra element and the other of which does not.

Set B's size is |B| = |A| + 1 since it includes all of the components of set A plus an additional element. There must be two equivalent subsets in set B for each subset of A (S1, S2,..., Sa), one of which must contain the extra element and the other of which must not. This extra element must be present in at least one subset. B must therefore have a total of 2n subsets. For instance, if set A has the three subsets S1, S2, and S3, then set B will have the same three subsets plus S1 plus the extra element, S2 plus the extra element, and S3 plus the extra element, for a total of six subsets.

Learn more about series here

https://brainly.com/question/15415793

#SPJ4

we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

[tex]We\ have \ A=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\B=[1\ 2 \ 3]\\\\C=\left[\begin{array}{ccc}1&1\\1&1&\end{array}\right] \\\\D=\left[\begin{array}{ccc}1\\1\\1\end{array}\right] \\\\E=[3][/tex]

So ,we have to produced 25 matrix -

AA,AB,AC,AD,AE

BA,BB,BC,BD,BE

CA,CB,CC,CD,CE

DA,DB,DC,DD,DE

EA,EB,EC,ED,EE

To multiply two matrix column of first matrix equal to row of second matrix.

So we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

[tex]AA=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\AA=\left[\begin{array}{ccc}-2&-2&-2\\4&1&-2\\10&4&-2\end{array}\right] \\\\AD=\left[\begin{array}{ccc}0\\1\\6\end{array}\right] \\\\CC=\left[\begin{array}{ccc}2&2\\2&2\\\end{array}\right] \\\\EE=[9][/tex]

So we can compute A=3 by 3 matrix, B= 1 by 3 matrix

C=2 by 2 matrix D= 3 by 1 matrix  and E= 1 by 1 matrix ,

We can compute only AA ,AD,BA, BD,CC,DB,EE,

The complete question is :-

Let the matrices,

[tex]A=\left[\begin{array}{ccc}1&0&-1\\2&1&0\\3&2&1\end{array}\right] \\\\B=[1\ 2 \ 3]\\\\C=\left[\begin{array}{ccc}1&1\\1&1&\end{array}\right] \\\\D=\left[\begin{array}{ccc}1\\1\\1\end{array}\right] \\\\E=[3][/tex]

Which of the 25-matrix products AA, AB, AC ......EE are defined? Compute those products that are defined.

Learn more about matrix.

https://brainly.com/question/29132693

#SPJ4

According to the information, to create a rectangle polygon with a perimeter of 18 units, we must put sides of 3 units and bases of 6 units.

A polygon is a term that refers to a plane geometric figure composed of a finite sequence of consecutive line segments that enclose a region in a plane. These segments are called sides, and the points at which they intersect are called vertices.

A rectangle is a polygon with four sides and four vertices that is characterized by having two of its sides longer than the other two sides. Therefore, to draw a rectangle with a perimeter of 18 units we must distribute the measurements as follows:

Learn more about rectangles in: https://brainly.com/question/29123947

#SPJ1

The integration of the expression [x / (x² + 1)³] will be - 1 / 4(x² + 1)² + c.

Integration is a way of finding the total by adding or summing the components. It's a reversal of differentiation, in which we break down functions into pieces. This approach is used to calculate the total on a large scale.

I = ∫ [x / (x² + 1)³] dx

Let x² + 1 = t, then x dx = dt / 2. Then we have

I = ∫ [1 / 2(t)³] dt

I = (1/2) ∫ [1 /(t)³] dt

I = (1/2) [-1 /2t²] + c

I = - (1/4) (1/(x² + 1)²) + c

I = - 1 / 4(x² + 1)² + c

The integration of the expression [x / (x² + 1)³] will be - 1 / 4(x² + 1)² + c.

More about the integration link is given below.

https://brainly.com/question/18651211

#SPJ1

So, the position vector of a point r is (1-1/3)p + (1/3)q.

The position vector of a point can be found using the following formula:

r = (1-λ)p + λq

where λ is the scalar value that represents the ratio in which the point divides the line segment.

In this case, the ratio of the point dividing the line segment is 1:2. So, λ = 1/3.

Substituting the values of p and q, we get:

r = (1-1/3)p + (1/3)q

To show that point p is the midpoint of the line segment rq, we can use the following property of midpoints:

The position vector of the midpoint of a line segment with endpoints p and q is given by (p+q)/2.

In this case, the position vector of point p is (1-1/3)p + (1/3)q, and the position vector of point q is (2/3)p + (2-2/3)q = (2/3)p + (4/3)q

So, the midpoint of the line segment rq is given by:

((1-1/3)p + (1/3)q + (2/3)p + (4/3)q)/2 = (3/3)p + (5/3)q

which is (p+q)/2, so p is the midpoint of the line segment rq

To learn more about Vectors

Visit; brainly.com/question/13322477

#SPJ4

The distance between the xy, yz, and xz planes are 5, 3, and 7.

Multivariable Calculus

This question relates to multivariable calculus.

a) Distance of point (x, y, z) from the XY-plane

The |z co-ordinate of the point| = |z|

distance of the point (3, 7, -5) from xy plane

|-5|=5

b) Distance of point (x, y, z) from yz plane

The |x coordinate of the point| = |x|

Therefore, the distance of the point (3, 7, -5) from yz plane is

|3|=3

c) Distance of point (x, y, z) from xz plane

The |y coordinate of the point| = |y|.

The distance of the point (3, 7 -5) from the xz-plane is

|7|=7

d) Distance of point (x, y, z) from the x-axis

The distance of the points from the x-axis is

[tex]x^{2} =y^{2} +z^{2} \\\\x=\sqrt{y^{2} +z^{2} } \\\\x=\sqrt{7^{2}+(-5)^{2} } \\\\x=\sqrt{74}[/tex]

e) Distance of point (x, y, z) from the y-axis

[tex]y=\sqrt{x^{2} +z^{2} } \\\\y=\sqrt{3^{2}+(-5)^{2} } \\\\y=\sqrt{34}[/tex]

f) Distance of point (x, y, z) from the z-axis

[tex]z=\sqrt{x^{2} +y^{2} } \\\\z=\sqrt{3^{2}+7^{2} } \\\\z=\sqrt{58}[/tex]

From the calculations above,

To know more about the distance of a point:

https://brainly.com/question/14407559

#SPJ4

Answer:

Step-by-step explanation:

Consider the following four matrices:

(1000),(0010),(0100),(0001).

See what happens when you solve the equation AB=BA

for each of those four (let B

be each one of those four). To facilitate it, write A=(acbd)

You will get a set of equations for the entries of a

which are easily solved. This trick is quite general.

Answer:

(4,8) (0,2) (-6,-7)

Step-by-step explanation:

Perpendicular means it sort of makes a cross with 90º angle from the already existing line. Imagine it starts at (4,8) coordinate and comes falling to the left, passing through p(-4,-4) coordinate, the points it will go through will be (4,8) (0,2) and (-6,-7) respectively.

A sure way to do this is to mark every point that's on the table below and see which ones form a perpendicular line with the original.