To find the minimum de Broglie wavelength of the photoelectrons emitted from this metal, we need to first find the kinetic energy of the emitted electrons.
The energy of the incident photon can be calculated using the formula:
E = hc/λ
where h is Planck's constant, c is the speed of light, and λ is the wavelength of the incident light.
Plugging in the values given, we get:
E = (6.626 x 10^-34 J s) x (3.00 x 10^8 m/s) / (105 x 10^-9 m)
E = 1.89 x 10^-17 J
To find the kinetic energy of the emitted electrons, we need to subtract the work function (the minimum energy required to remove an electron from the metal) from the energy of the incident photon:
K.E. = E - φ
where φ is the work function.
Plugging in the values given, we get:
K.E. = (1.89 x 10^-17 J) - (5.00 eV x 1.60 x 10^-19 J/eV)
K.E. = 1.12 x 10^-18 J
Now, we can use the de Broglie wavelength equation to find the minimum de Broglie wavelength of the photoelectrons:
λ = h/p
where p is the momentum of the electron, given by:
p = √(2mK.E.)
where m is the mass of the electron.
Plugging in the values given, we get:
p = √(2 x 9.11 x 10^-31 kg x 1.12 x 10^-18 J)
p = 1.65 x 10^-24 kg m/s
Now, we can use this momentum value to find the de Broglie wavelength:
λ = (6.626 x 10^-34 J s) / (1.65 x 10^-24 kg m/s)
λ = 4.01 x 10^-10 m
Therefore, the minimum de Broglie wavelength of the photoelectrons emitted from this metal is 4.01 x 10^-10 m.
To know more about de Broglie wavelength :
https://brainly.com/question/30404168
#SPJ11
A resistor is not a very good______.
Answer:
Conductor.
Explanation:
Resistors conduct electricity, but put up oppisition to the current flow.
thinking back to chapter 8, a tidal wave is which wave type?
A tidal wave is a type of wave known as a "tidal bore," also called a "seiche."
Tidal bores occur when the rising tide creates a wall of water that moves up a river or narrow bay against the direction of the river or bay's flow.
This occurs due to the gravitational forces of the Moon and Sun, which cause the ocean's water level to rise and fall in a regular cycle of tides.
As the high tide crests at the mouth of the river or bay, a surge of water propagates upstream and collides with the lower water level.
The interaction between the two bodies of water generates a large, powerful wave that moves upstream.
The height and speed of the tidal bore depend on the shape and depth of the river or bay, as well as the astronomical tide cycle.
Tidal waves can be dangerous, as they can cause damage to boats, structures, and ecosystems along the river or bay.
Some tidal bores can reach heights of up to several meters and travel at speeds of up to 30 km/h (18.6 mph), creating dangerous conditions for those caught in their path.
Despite their destructive potential, tidal bores can also be an attraction for surfers and thrill-seekers who ride the waves on specialized boards or boats.
Tidal bore surfing has become a popular sport in some parts of the world, such as the Qiantang River in China and the Amazon River in Brazil.
To know more about tidal wave visit link :
https://brainly.com/question/12604849
#SPJ11
How does energy in the food chain flow to an omnivore such as a fox?
A) The fox is a plant eater and receives energy directly from plants.
B) The fox receives energy directly from the sun and the plants it eats.
C) When the fox eats an animal that eats plants, it receives energy directly from the sun.
D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.
The correct answer is option D) When the fox eats an animal that eats plants, it receives energy indirectly from the sun.
How does energy flow in a food chain?Energy in a food chain flows from the sun, to the producers (plants), to the primary consumers (herbivores), to the secondary consumers (carnivores), and so on. Omnivores, such as foxes, consume both plants and animals, but they typically obtain more of their energy from consuming other animals.
When a fox eats an animal that eats plants, it is receiving energy indirectly from the sun. The plants that the prey animal consumed converted the energy from the sun into organic molecules through the process of photosynthesis. The prey animal then consumed those plants and converted the organic molecules into its own tissues. When the fox eats the prey animal, it is obtaining the energy stored in the prey's tissues.
Learn more about the food chain here:
https://brainly.com/question/7564953
#SPJ1
the maximum force that can be applied without breaking a material is called the breaking force. true false
True. The breaking force refers to the maximum amount of force that a material can withstand before it fractures or breaks.
The highest amount of stress or force that a material can sustain before it fractures or breaks is referred to as the breaking force, also known as the ultimate tensile strength. This is a crucial characteristic of materials that are frequently used to assess their durability and mechanical strength.
The composition, structure, temperature, and loading conditions of the material, among other things, can all have an impact on the breaking force. Higher breaking forces are often regarded as more robust materials, which makes them suited for applications requiring great strength and durability.
Learn more about force:
https://brainly.com/question/30236242
#SPJ4
a 0.45 m pipe that is closed at one end emits a 1683 hz wave that has a wavelength of 0.2 m. determine what harmonic the wave is, the fundamental frequency, the fundamental wavelength, the wave speed,
The harmonic wave is n = (2m - 1), the frequency is 7582 Hz, the wavelength is 4.5 and the wave speed is 336.6 m/s.
What harmonic the wave is, the fundamental frequency, the fundamental wavelength, and the wave speed?In a closed pipe, the wave can only have odd-numbered harmonics, because the closed end of the pipe is a node of the wave. The harmonic number can be determined using the equation:
n = (2m - 1)
where n is the harmonic number and m is an integer.
The wavelength of the wave is given as λ = 0.2 m. The fundamental wavelength is given by the equation:
λ1 = 2L
where L is the length of the pipe. Substituting the value of L, we get:
λ1 = 2(0.45 m) = 0.9 m
The fundamental frequency is given by the equation:
f1 = v / λ1
where v is the speed of the wave. Rearranging the equation, we get:
v = f1 * λ1
The wave speed can also be determined using the equation:
v = f * λ
where f is the frequency of the wave and λ is its wavelength.
Equating the two expressions for v, we get:
f1 * λ1 = f * λ
Solving for the fundamental frequency, we obtain:
f1 = (λ1 / λ) * f = (0.9 m / 0.2 m) * 1683 Hz ≈ 7582 Hz
Therefore, the fundamental frequency of the wave is approximately 7582 Hz.
The harmonic number is given by the equation:
n = (2m - 1)
where m is an integer. To determine the harmonic number, we can rearrange the equation to get:
m = (n + 1) / 2
Substituting the value of λ and λ1, we can solve for n:
λ = λ1 / n
n = λ1 / λ = 0.9 m / 0.2 m = 4.5
Since n must be an integer, the nearest odd integer to 4.5 is 5.
Therefore, the wave is the fifth harmonic.
Finally, we can determine the wave speed using the equation:
v = f * λ = (1683 Hz) * (0.2 m) = 336.6 m/s
Therefore, the wave speed is approximately 336.6 m/s.
Learn more about wave
brainly.com/question/25954805
#SPJ11
A car leaves the rest and accelerates evenly for 10 s, reaching a speed of 20 m/s.
calculate the cars acceleration? How many meters did the car travel
Answer:
acceleration = 2m/s^2
distance= 100 meters
Explanation:
acceleration = (final velocity - initial velocity) / time
acceleration = (20 m/s - 0 m/s) / 10 s
-----------------------------------------------------------------------------------
distance = (initial velocity * time) + (0.5 * acceleration * time^2)
since the car starts from rest, the initial velocity is 0.
distance = 0.5 * 2 m/s^2 * (10 s)^2
if the trench is dug too deep or if there are low spots in the trench, ____ should be used as fill under the pipe.
If the trench is dug too deep or if there are low spots in the trench, compacted backfill should be used as fill under the pipe. This helps to provide support and prevent the pipe from settling or becoming damaged over time.
The backfill material should be free from rocks, debris, and other sharp objects that could puncture the pipe, and it should be compacted in layers to ensure a stable foundation.
Additionally, it is important to make sure that the backfill material is properly graded to prevent water from pooling around the pipe and causing erosion or other issues.
To know more about backfill material:
https://brainly.com/question/31079656
#SPJ11
a cube has a density of 2200 kg/m3 while at rest in the laboratory. what is the cube's density as measured by an experimenter in the laboratory as the cube moves through the laboratory at 89.0 % of the speed of light in a direction perpendicular to one of its faces? you may want to review
The density of the cube measured will be 6047 kg/m³. It is determined by the researcher in the lab, may be calculated using the relativistic density equations and the Lorentz factor to be 2.747.
In order to solve this puzzle, you must determine the density of a cube while it travels at 89% the speed of light through a laboratory. The cube weighs 2200 kg/m³ at rest.
We can write a formula
ρ' = γρ
ρ' ⇒ density that measured by experimenter
γ ⇒ Lorentz factor
ρ ⇒ at rest the cube's density
The density of an item changes as its velocity changes, according to special relativity.
Cube is moving at 89.0% of the speed of light means v = 0.890c
c ⇒ Speed of light
Lorentz Factor γ = 1/√(1 - v²/c²) = 1/√(1 - (0.890c)²/c²) = 2.747
Now ρ' = γρ = 2.747 × 2200 kg/m³ = 6047 kg/m^3
This indicates that the cube's high velocity caused the experimenter to perceive it as being denser.
Learn more about density:
https://brainly.com/question/29775886
#SPJ4
how much work is done by the field along the parabolic path given by as goes from to ? (remember: how you parametrize the path is up to you and will not change your answer...)
The work done by the field along the parabolic path given by y = x as x goes from -1 to 1 is 19/3 Joules.
We can parametrize the parabolic path as follows:
x(t) = t, where t goes from -1 to 1
y(t) = t
Substituting these into the expression for the field F, we get:
F = [tex](3t^2 + 2t)i + (4t + 2t)j[/tex]
F = [tex](3t^2 + 6t)i + (6t)j[/tex]
To find the work done by the field along this path, we need to integrate the dot product of F and the path differential vector dr, evaluated along the path:
W = ∫ F · dr
dr = dx i + dy j
dr = dt i + dt j
dr = (i + j) dt
Substituting F and dr, we get:
W = ∫ F · dr
W = [tex]∫[(3t^2 + 6t)i + (6t)j] · (i + j) dt[/tex]
W = [tex]∫(3t^2 + 9t) dt[/tex]
Evaluating the integral from t = -1 to t = 1, we get:
W = [tex][t^3/3 + 9t^2/2] from -1 to 1[/tex]
W =[tex][(1/3 + 9/2) - (-1/3 + 9/2)][/tex]
W = [tex][19/3] Joules[/tex]
Therefore, the work done by the field along the parabolic path given by y = x as x goes from -1 to 1 is 19/3 Joules.
Learn more about parabolic path
https://brainly.com/question/30655069
#SPJ4
Full Question: How much work is done by the field F = (3x2 + 2y)i + (4y + 2x)ị along the parabolic path given by y = x? as x goes from –1 to +1? (Remember: how you parametrize the path is up to you and will not change your answer...)
a high-speed train is traveling at a constant 150 m/s (about 300 mph) on a straight, horizontal track across the south pole. find the angle between a plumb line suspended from the ceiling inside the train and another inside a but on the ground. in what direction is the plumb line on the train deflected?
The angle between the plumb line on the train and the plumb line on the ground is approximately 0.02 degrees. The plumb line on the train is deflected towards the east, in the direction of the train's motion.
We need to calculate the angle between the plumb line on the train and the plumb line on the ground.
By using the tangent function
tanθ = (v² ÷ gR)
where,
θ = angle between the plumb line on the train and the plumb line on the ground
v = 150 m/s is velocity of the train
g = 9.81 m/s² is acceleration due to gravity
R = 6,371,000 m isradius of the earth
Plugging in the values, we get:
tanθ = (150₂ ÷ (9.81 × 6,371,000))
tanθ = 0.000346
Taking the inverse tangent of both sides, we get:
θ = tan⁻¹(0.000346)
θ = 0.0199 degrees
θ ≈ 0.02 degrees deflected towards the east, in the direction of the train
To learn more about direction the link:
https://brainly.com/question/30173481
#SPJ4
which of the following is a normative statement? a. a bicycle has two wheels. b. you should wear a helmet when cycling. c. the sky is blue. d. electricity follows the path of least resistance. e. a unicycle has five wheels.
The normative statement in this list is b.
Which of the following is a normative statement?The normative statement in this list is b. "You should wear a helmet when cycling." This is because it is expressing a value judgment and prescribing a course of action, rather than simply stating a fact like the other options. The other statements are all descriptive and objective, stating things that are generally true or observable, such as the number of wheels on a bicycle or the color of the sky. The statement about electricity is a scientific principle, but it is still not normative in nature.
Learn more about normative statement
brainly.com/question/15823409
#SPJ11
A squirrel on a limb near the top of a tree loses its grip on a nut, so that the nut
slips away horizontally at a speed of 10.0 cm/s. If the nut lands at a horizontal
distance of 18.6 cm, how high above the ground is the squirrel?
We do not have the value of yo, the initial vertical position of the squirrel (height of the tree limb), so we cannot calculate the exact height of the squirrel above the ground without that information.
What is Velocity?
Velocity is a vector quantity that describes the rate of change of an object's position with respect to time. It specifies both the speed and direction of an object's motion. Velocity is defined as the displacement of an object per unit of time, and it is typically denoted by the symbol "v"
We need to convert the horizontal distance from centimeters to meters and use consistent units in our calculations. Plugging in the given values:
x = 0.186 m
xo = 0 m
vox = 0.1 m/s
Using the horizontal motion equation, we can calculate the time of flight (t) of the nut:
0.186 = 0 + 0.1*t
t = 1.86 seconds
Now, we can use the vertical motion equation to calculate the height (y) of the squirrel:
y = yo + voyt - 0.5g*[tex]t^{2}[/tex]
Since the squirrel loses its grip and has no initial vertical velocity (voy = 0), we have:
y = yo - 0.5g[tex]t^{2}[/tex]
Plugging in the known values:
g = 9.8 m/[tex]s^{2}[/tex]
t = 1.86 s
Learn more about Velocity from the given link
https://brainly.com/question/24445340
#SPJ1
a 94.0 a current circulates around a 2.40-mm -diameter superconducting ring what is the on axis magnetic field
The value of B depends on the distance z from the center of the ring, and it will increase as z gets closer to the ring.
The magnetic field on the axis of a circular loop carrying a current I can be calculated using the Biot-Savart law, which states that the magnetic field at a point is directly proportional to the current flowing through the loop and inversely proportional to the distance between the point and the loop.
For a circular loop of radius r, the magnetic field on its axis at a distance z from the center can be calculated as:
[tex]$B = \frac{\mu_0 I}{2}\frac{r^2 + z^2}{\sqrt{r^2 + z^2}^3}$[/tex]
where μ₀ is the permeability of free space.
In this case, the current I = 94.0 A and the diameter of the ring is 2.40 mm, which means the radius r of the ring is 1.20 mm = 0.00120 m.
The magnetic field on the axis of the ring at a distance z can be calculated as:
[tex]$B = \frac{\mu_0 I}{2}\frac{r^2 + z^2}{\sqrt{r^2 + z^2}^3}$[/tex]
[tex]$B = \left(4\pi \times 10^{-7} \frac{T \cdot m}{A}\right) \frac{94.0,A}{2}\left(\frac{0.00120,m}{2}^2 + z^2\right)^{-3/2}$[/tex]
[tex]$B = (2\pi \times 10^{-6},\mathrm{T})(0.0003606 + z^2)^{-3/2}$[/tex]
Therefore, the magnetic field on the axis of the ring is given by
[tex]$B = (2\pi \times 10^{-6},\mathrm{T})(0.0003606 + z^2)^{-3/2}$[/tex]
The value of B depends on the distance z from the center of the ring, and it will increase as z gets closer to the ring.
For more such questions on distance , Visit:
https://brainly.com/question/26550516
#SPJ11
A book sitting on a desk with the surface area of the cover of .05 m^2. The atmospheric pressure is 100kPa. What is the downward force of the atmosphere on the book?
The downward force of the atmosphere on the book is equal to the pressure of the atmosphere multiplied by the surface area of the book's cover and it is calculated to be 5 N.
What is atmospheric pressure?Atmospheric pressure is the pressure exerted by the weight of the Earth's atmosphere on objects on or near the surface of the Earth. It is caused by the gravitational attraction of the Earth on the gases in the atmosphere. The atmospheric pressure varies with altitude, temperature, and weather conditions, and is typically measured in units of pressure such as pascals (Pa) or kilopascals (kPa).
Force = Pressure x Area
Where:
Pressure = 100 kPa (given)
Area = 0.05 m² (given)
Substituting the given values, we get:
Force = 100 kPa x 0.05 m²
Force = 5 N
Therefore, the downward force of the atmosphere on the book is 5 N.
To know more about atmospheric pressure, visit:
https://brainly.com/question/30166820
#SPJ1
charge is distributed throughout a spherical volume of radius what is the electric field outside the sphere? g
To determine the electric field outside a charged sphere, we can use Gauss's Law, which states that the flux of the electric field through a closed surface is proportional to the charge enclosed by the surface.
If the charge is distributed uniformly throughout the spherical volume of radius R, then the charge enclosed by a Gaussian surface outside the sphere is simply the total charge of the sphere.
The electric field outside the sphere is radial, and by symmetry, it must have the same magnitude at any point on a sphere with radius r greater than R.
Therefore, we can choose a spherical Gaussian surface with radius r > R and calculate the flux of the electric field through that surface.
By Gauss's Law, the flux is proportional to the charge enclosed, which is the total charge Q of the sphere.
The electric field magnitude E is related to the flux Φ and the surface area A of the Gaussian surface by:
Φ = E * A
where Φ = Q / ε_0 is the total electric flux through the surface, and ε_0 is the electric constant.
Since the Gaussian surface is a sphere, its surface area is 4πr^2. Therefore, we have:
E * 4πr^2 = Q / ε_0
Solving for E, we get:
E = Q / (4πε_0r^2)
This expression tells us that the electric field outside the sphere decreases with the square of the distance from the center of the sphere.
At large distances (compared to the radius of the sphere), the electric field can be approximated as that of a point charge, with the same total charge as the sphere, located at the center of the sphere.
To know more about Gauss's Law visit link :
https://brainly.com/question/14767569
#SPJ11
thermal expansion may cause an equipment or piping system overpressure when the liquid is blocked-in
Thermal expansion is a phenomenon in which materials expand when they are heated and contract when they are cooled. This can be a problem in industrial equipment or piping systems that contain liquids, especially when the liquid is blocked-in and cannot move freely.
When the temperature of the liquid increases due to an external heat source, such as a nearby furnace or the sun, the liquid will expand and cause an increase in pressure within the equipment or piping system. This increase in pressure can lead to overpressure, which can be dangerous and can potentially cause equipment failure or system rupture.
It is important to account for thermal expansion when designing industrial equipment and piping systems to ensure that they can safely withstand the changes in pressure caused by temperature fluctuations.
Learn more about equipment ,
https://brainly.com/question/30230359
#SPJ4
a mirror on the passenger side of your car is convex and has a radius of curvature with magnitude 18.0 cm. (a) another car is behind your car, 9.00 m from the mirror, and this car is viewed in the mirror by your passenger. if this car is 1.5 m tall, what is the height of the image? (b) the mirror has a warning attached that objects viewed in it are closer than they appear. why is this so?
The warning that objects seen in the mirror are closer than they appear is due to the fact that convex mirrors produce reduced, virtual images of objects. The image in a convex mirror appears to be closer than it actually is, as light rays are refracted back toward the optical axis and scattered. Also, because the image is smaller than the actual object, it appears to be further away than it actually is. Therefore, it is important to take into account this distortion in the perception of distance when using convex mirrors in vehicles and other devices
the electric motor of a model train accelerates the train from rest to 0.720m/s in 22.0milliseconds (ms). the total mass of the train is 875g. Find the average power delivered to the train during its acceleration.
To find the average power delivered to the train during its acceleration, we need to use the formula:
Power = Work / Time
First, we need to find the work done on the train during its acceleration. We can use the formula:
Work = Force x distance
The force on the train is equal to its mass times its acceleration:
Force = Mass x Acceleration
Using the given values, we get:
Force = 0.875 kg x (0.720 m/s^2) = 0.63 N
The distance the train travels during its acceleration can be found using the formula:
Distance = (1/2) x Acceleration x Time^2
Plugging in the given values, we get:
Distance = (1/2) x 0.720 m/s^2 x (22.0 x 10^-3 s)^2 = 0.17 m
So the work done on the train during its acceleration is:
Work = 0.63 N x 0.17 m = 0.1071 J
Now we can plug this value into the formula for power:
Power = Work / Time
The time given is 22.0 milliseconds, which is 0.0220 seconds:
Power = 0.1071 J / 0.0220 s = 4.87 W
Therefore, the average power delivered to the train during its acceleration is 4.87 watts.
To know more about acceleration :
https://brainly.com/question/29135987
#SPJ11
The speedometer on a bicycle indicates that you travel 60 m
while your speed increases from 0 to 10 m/s
. The radius of the wheel is 0.30 m
. The bicycle moves with constant acceleration.
Find the tangential acceleration of the rim of the wheel.
Find the rotational acceleration of the wheel.
Find the rotational speed of the wheel just after traveling 60 m.
Tangential acceleration of the rim of the wheel = Change in speed / time = (10 m/s - 0 m/s)/(60 m/ 0.30 m) = 333.33 m/s²
What is acceleration?Acceleration is the rate of change of velocity over time. It is a vector quantity, which means it has both magnitude and direction. Acceleration can be caused by a variety of factors, including an external force, a change in mass, or a change in velocity. Acceleration is typically measured in meters per second squared (m/s²). When an object is accelerating, its velocity changes over time.
Rotational acceleration of the wheel = Tangential acceleration / Radius of the wheel = 333.33 m/s² / 0.30 m = 1111.11 rad/s²
Rotational speed of the wheel just after traveling 60 m
= Initial rotational speed + Acceleration x Time
= 0 + 1111.11 rad/s² x (60 m / 0.30 m)
= 37,037.04 rad/s
To learn more about acceleration
https://brainly.com/question/460763
#SPJ1
an investigator places a sample 1.0 cm from a wire carrying a large current; the strength of the magnetic field has a particular value at this point. later, she must move the sample to a 3.0 cm distance, but she would like to keep the field the same. part a by what factor must she increase the current?
The investigator must increase the current by a factor of 5 to keep the magnetic field strength constant when the distance is increased from 1.0 cm to 5.0 cm.
When a current flows through a wire, it produces a magnetic field around it. The strength of this field depends on the current and the distance from the wire. According to the inverse-square law, the magnetic field strength decreases as the distance from the wire increases.
For a long, straight wire carrying a current I, the magnetic field strength at a distance r from it can be calculated as follows:
B = μ0 I ÷ (2πr)
where μ0 is the permeability of free space, which is a constant.
If the magnetic field strength is to remain constant when the distance is increased from 1.0 cm to 5.0 cm, then we can set the two expressions for B equal to each other:
μ0 I ÷ (2πr₁) = μ0 (xI) ÷ (2πr₂)
where x is the factor by which the current must be increased.
Simplifying this expression, we get:
x = r₂ ÷ r₁ = 5.0 cm ÷ 1.0 cm = 5
To learn more about magnetic follow the link:
https://brainly.com/question/3160109
#SPJ4
wo stars orbit their common center of mass as shown in the diagram. the masses of the two stars are 3m and m. the distance between the stars is d. what is the value of the gravitational potential energy of the two star system?group of answer choices
The value of the gravitational potential energy of the two star system is -(GM²/d²), the correct answer is (E)
The gravitational potential energy of the two-star system can be calculated using the formula:
U = -G(m₁m₂/r)
where G is the gravitational constant, m₁ and m₂ are the masses of the stars, and r is the distance between them.
In this case, one star has a mass of 3M and the other has a mass of M. The distance between them is d. We can calculate the position of the center of mass of the system using:
r = (3Md)/(3M + M) = (3/4)d
This means that each star is at a distance of (1/4)d from the center of mass. Using this information, we can calculate the gravitational potential energy of the system as:
U = -G(3MM ÷ (1/4)d) - G(M3M ÷ (1/4)d)
U = -G(12M²/d) - G(9M²/d)
U = -G(21M²/d)
Therefore, the gravitational potential energy of the two-star system is -(GM²/d) multiplied by 21. Thus, the correct answer is option (E), -(GM²/d²).
To learn more about gravitational follow the link:
https://brainly.com/question/3009841
#SPJ4
The complete question is:
Two stars orbit their common center of mass as shown in the diagram below. The masses of the two stars are 3M and M. The distance between the stars is d.
What is the value of the gravitational potential energy of the two star system?
A) -(GM²/d)
B) (3GM²/d)
C) -(GM²/d²)
D) -(3GM²/d)
E) -(GM²/d²)
which argument best supports the student's claim? responses if the distance between two objects decreases, the gravitational force between the objects will not change if the distance between two objects decreases, the gravitational force between the objects will not change if the distance between two objects increases, the gravitational force between the objects will decrease. if the distance between two objects increases, the gravitational force between the objects will decrease. if the distance between two objects increases, the gravitational force between the objects will increase. if the distance between two objects increases, the gravitational force between the objects will increase. if the distance between two objects decreases, the gravitational force between the objects will disappear.
The argument that best supports the student's claim is: "If the distance between two objects increases, the gravitational force between the objects will decrease." This statement aligns with the principles of gravitational force as defined by Isaac Newton's Law of Universal Gravitation.
According to this law, the gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. In simpler terms, as the distance between two objects increases, the gravitational force between them decreases, and vice versa.
The other statements provided do not accurately represent the relationship between distance and gravitational force. For example, saying that the gravitational force will not change or will disappear as the distance changes contradicts the Law of Universal Gravitation. Similarly, claiming that the gravitational force will increase as the distance between objects increases is also incorrect based on the principles of this law.
In conclusion, the argument stating that an increase in distance between two objects leads to a decrease in the gravitational force between them best supports the student's claim, as it accurately reflects the principles established in the Law of Universal Gravitation.
For more such questions on Gravitational force.
https://brainly.com/question/29367993#
#SPJ11
i need some help with this physics question
The response is C. It has bulk and occupies room. All substance has a volume and takes up space, whether it be a solid, liquid, or gas. It is a basic characteristic of matter. While matter can move from hot to cold and perform work.
What are two unbreakable qualities?A metal-skinned hull, steam propulsion, and a main armament of guns equipped to fire explosive shells are the three qualities that define a fighting ironclad. All of these innovations reached their full maturity with the French Navy's November 24, 1859, launch of the "Gloire," but the US Civil War saw the invention of the ironclad.
What are the qualities of matter's properties?Any attribute that may be measured, such as a substance's mass, volume, length, density, colour, malleability, or melting point Properties of matter include point, hardness, smell, temperature, and more.
To know more matter visit:-
https://brainly.com/question/14987556
#SPJ1
Answer: D
Explanation:
in a study of the photoelectric effect, a researcher shines low-intensity visible light with a wavelength of 650 nm on a sample of metal. she notices that no photoelectrons are produced. what would happen if she were to increase the intensity of the light by a factor of 10?:
Increasing the intensity of the light by a factor of 10 would increase the number of photoelectrons produced.
The photoelectric effect is a phenomenon in which electrons are emitted from a material when it absorbs electromagnetic radiation, such as light. The energy of the radiation must be greater than the work function of the material for electrons to be emitted.
Increasing the intensity of the light increases the number of photons striking the surface of the metal, which increases the likelihood of electrons being emitted. Therefore, increasing the intensity of the light by a factor of 10 would result in the emission of photoelectrons.
To learn more about photoelectrons, here
https://brainly.com/question/16772624
#SPJ4
a star with a right ascension of 8hr is transiting at 5am. what time will a star with a right ascension of 6hr transit?
To determine the time a star with a right ascension of 6hr will transit, we can follow these steps:
1. Identify the right ascension of the star currently transiting (8hr) and the time of transit (5am).
2. Determine the difference in right ascension between the two stars (8hr - 6hr = 2hr).
3. Convert the difference in right ascension to a time difference (2hr x 4 minutes/degree x 15 degrees/hour = 120 minutes).
4. Calculate the transit time of the star with a right ascension of 6hr by subtracting the time difference from the given transit time (5am - 120 minutes = 3am).
So, a star with a right ascension of 6hr will transit at 3am.
To know more about right ascension :
https://brainly.com/question/207368
#SPJ11
Before the use of radar how did people know a tornado had formed
Before the use of radar, people relied on visual cues such as cloud formations, debris, and the sound of the tornado to know if one had formed.
Prior to the invention and widespread use of radar technology, people had to rely on their senses and observations to determine if a tornado had formed. They would look for signs such as a rotating cloud or a funnel-shaped cloud descending from the sky. Additionally, they would listen for the sound of the tornado, which has been described as a roar or a freight train.
Debris being thrown around in a circular motion is another visual clue that a tornado has formed. While these methods were not as accurate as modern radar technology, they did allow people to identify and take precautions against tornadoes to some degree.
To know more about tornado, here
brainly.com/question/30404827
#SPJ1
The surface of which jovian moon most resembles the pack ice of the Arctic Ocean? A) Amalthea B) Io C) Europa D) Ganymede E) Callisto.
A cord is wrapped around the rim of a solid uniform wheel 0. 280 m in radius and of mass 9. 60 kg. A steady horizontal pull of 50. 0 N to the right is exerted on the cord, pulling it off tangentially from the wheel. The wheel is mounted on frictionless bearings on a horizontal axle through its center
Part A) Compute the angular acceleration of the wheel
Part B) Compute the acceleration of the part of the cord that has already been pulled off the wheel
Part C) Find the magnitude of the force that the axle exerts on the wheel
Part D) Find the direction of the force that the axle exerts on the wheel
Part E) Which of the answers in parts A, B, C, and D would change if the pull were upward instead of horizontal?
The torque exerted on the wheel is 25 N·m.
The torque exerted on the wheel can be calculated using the formula:
Torque = force x radius
Given that the force applied to the cord is 50 N, and the radius of the wheel is 0.5 meters. Using the formula for torque, we can calculate that the torque exerted on the wheel is equal to the force applied multiplied by the radius of the wheel. We can plug these values into the formula to get:
Torque = 50 N x 0.5 m
Torque = 25 N·m
Therefore, the torque exerted on the wheel is 25 N·m.
To know more about torque, here
brainly.com/question/25708791
#SPJ4
--The complete Question is, If a cord is wrapped around the rim of a solid uniform wheel with a radius of 0.5 meters, and a force of 50 N is applied to the cord, what is the torque exerted on the wheel? Assume no friction or slipping between the cord and the wheel. --
look again at the visible-light view of m82. what is the source of the white and blue light that dominates the image?
In the visible-light view of M82, the source of the white and blue light that dominates the image is mainly due to the presence of young, massive stars. These stars emit high amounts of energy, which results in a strong blue and white glow.
The white and blue light in the visible-light view of M82 is primarily coming from young, hot, massive stars that are forming in the galaxy's intense starburst regions. These stars emit large amounts of ultraviolet radiation, which ionizes the surrounding gas and causes it to glow brightly in visible light. Additionally, some of the blue light may be due to scattered starlight off of dust particles in the galaxy's disk.
The blue light comes from the hot, young stars, while the white light is a combination of light emitted by various types of stars within the galaxy. The high star formation rate in M82 contributes to the abundance of these bright stars and the overall appearance of the galaxy.
To know more about ultraviolet radiation:
https://brainly.com/question/30547511
#SPJ11
if the distance between earth and a star is measured using parallax measurements, how far apart in time should the two measurements be made to make the parallax measurement as accurate as possible?
To accurately measure the distance between Earth and a star using parallax measurements, the two observations should be made C. six months apart.
This effect occurs due to Earth's orbit around the Sun. To maximize the accuracy of parallax measurements, astronomers observe the star from two positions in Earth's orbit that are as far apart as possible, which corresponds to a baseline of twice Earth's orbital radius. This maximum separation occurs when observations are made six months apart because Earth would have moved to the opposite side of its orbit around the Sun, creating the longest possible baseline for the measurements.
Observing the star with a shorter time interval (e.g., instantaneously, a day, or even a year) would result in a smaller baseline and less accurate distance measurement due to a smaller parallax angle. Therefore, taking measurements six months apart allows astronomers to obtain the most precise parallax measurement and consequently, the most accurate distance to the star. Therefore the correct option is C
The Question was Incomplete, Find the full content below :
If the distance between the Earth and a star is measured using parallax measurements, how far apart in time should the two measurements be made to make the parallax measurement as accurate as possible?
A. Instantaneously
B. A day
C. Six months
D. A year
Know more about Earth's orbit here:
https://brainly.com/question/31074247
#SPJ11