Answer:
Acceleration
Explanation:
Momentum is acceleration because acceleration is movement and momentum is movement.
Momentun = Movement
Acceleration = Movement
Momentum = Acceleration
is it true that the radiation that transfer thermal energy is a type of electromagnetic radiation
Answer:
Since heat is carried by electromagnetic waves, it does not need a physical medium to transfer it. Instead it radiates through space - this is how the Earth is heated by the Sun despite space being a vacuum.
Explanation:
A ball is thrown with an initial velocity of u=(10i +15j) m/s. Whan it reaches the top of it trajectory neglecting air resistance . What is its valocity ?What is acceleration ?
Answer:
v = (10 i ^ + 0j ^) m / s, a = (0i ^ - 9.8 j ^) m / s²
Explanation:
This is a missile throwing exercise.
On the x axis there is no acceleration so the velocity on the x axis is constant
v₀ₓ = 10 m / s
On the y-axis velocity is affected by the acceleration of gravity, let's use the equation
v_y = [tex]v_{oy}[/tex] - g t
[tex]v_{y}^2 = v_{oy}^2 - 2 g (y - y_o)[/tex]
at the highest point of the trajectory the vertical speed must be zero
v_y = 0
therefore the velocity of the body is
v = (10 i ^ + 0j ^) m / s
the acceleration is
a = (0 i ^ - g j⁾
a = (0i ^ - 9.8 j ^) m / s²
Balance the following equation
K+ h20= KOH+ H2
Answer:
2K + 2h2O =2KOH + H2
(Tell me if its incorrect)
spheres are not perfect in space. But <> is in the cause of their shape.
Answer:
[tex] \boxed { \tt{gravitational \: pull(force)}}[/tex]
Ocean breezes are due to which method of heat transfer?
A. conduction
B. convection
C. greenhouse gases
D. radiation
E. geothermal energy
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. The correct option is B.
What is convection?Convection is a method of heat transfer that occurs in fluids (liquids and gases) and involves the movement of material carrying thermal energy. In convection, heat is transferred by the movement of hot fluid from one place to another, which then causes the transfer of heat from the hot fluid to the cooler fluid or surface it comes into contact with.
Convection can occur in two ways:
Natural convection: It occurs due to the density differences caused by temperature variations within a fluid. When a fluid is heated, its density decreases, making it lighter and causing it to rise. As it rises, it cools, becomes denser and falls back down, creating a cycle that is known as a convection current.
Forced convection: In this type of convection, a fluid is forced to flow over a surface or through a channel, by an external agent like a fan or pump. The forced flow enhances the rate of heat transfer from the surface or through the channel, as compared to natural convection, where the fluid flow is driven only by buoyancy forces.
Convection is a very important process for heat transfer in many natural and industrial applications, including heating and cooling systems, meteorology, oceanography, and more.
Here in the Question,
Ocean breezes are primarily due to convection, which is the transfer of heat through the movement of fluids or gases. As the sun heats up the surface of the ocean, the air above it also heats up and rises. This creates a low pressure area that draws in cooler air from over the land, resulting in a breeze that blows from the ocean towards the shore. This is why sea breezes are generally felt during the day, when the land is warmer than the sea, and why they tend to die down at night, when the opposite occurs.
Therefore, The correct answer is B i.e convection.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ7
static_______
sliding______
rolling_______
fluid_________
Answer:
a car
A sled sliding across snow or ice.
a ball down a hill
mercury
Explanation:
Una pelota recorre 20 m hacia la derecha y luego 10 m hacia la izquierda, todo en un lapso de tiempo de 10 s , cual es si velocidad y rapidez?
Answer:
v = 1 i ^ m / s, v = 1 m / s
Explanation:
In this problem we show the difference between vectors and scalars.
The average speed is
v = Δx / Δt
The bold are vectors
Δx = 20-10 = 10 i^ m
v = 10/10
v = 1 i ^ m / s
the unit vector indicates that the velocity is on the x-axis
The average speed is
v =Δx / Δt
v = 10/10
v = 1 m / s
in this case we have a scalar
Two people are talking at a distance of 3.0 m from where you are, and
you measure the sound intensity as 1.1'10 W/m. Another student
is 4.0 m away from the talkers. Calculate a reasonable estimate for the
sound intensity that the other student measures.
A) 62' 10-8 W/m2
B) 1.5'10-7 W/m2
8.3' 10-8 W/m2
D) 7.8'10-7 W/m2
Answer:
The sound intensity that the other student measure, I₂ is expected to be;
A) 6.2 × 10⁻⁸ W/m²
Explanation:
The measure of sound intensity is given by the following formula;
[tex]I = \dfrac{P}{4 \cdot \pi \cdot R^2}[/tex]
[tex]\dfrac{I_2}{I_1} = \dfrac{R_1^2}{R_2^2}[/tex]
Where;
I = The intensity
R = The radius
P = The power of the sound
Whereby we have;
The distance of the two people talking, R₁ = 3.0 m
The measure of the sound intensity, I₁ = 1.1 × 10⁻⁷ W/m² (from an online source)
The distance of the other student from the two people talking, R₂ = 4.0 m
Therefore, the estimate of the sound intensity, I₂, is given as follows;
[tex]{I_2} = \dfrac{R_1^2}{R_2^2} \times {I_1}[/tex]
[tex]{I_2} = \dfrac{(3.0 \, m)^2}{(4.0 \, m)^2} \times 1.1 \times 10^{-7} \ W/m^2 = 6.1875 \times 10^{-8} \ W/m^2[/tex]
I₂ = 6.1875 × 10⁻⁸ W/m²
∴ The sound intensity that the other student measure, I₂ ≈ 6.2 × 10⁻⁸ W/m²
Which motions are the components of projectile motion? A and B B and C A and C None of these are correct combinations.
Answer:
its A and B
Explanation:
Answer:
A or A and B
Explanation:
correct on edge 2021
On which of the following does upthrust Force depend?
*density of the object
*type of the liquid
*mass of the object
* volume of the immersed part of the object
* gravitational pull of Earth
Answer:
density of the object
volume of the immersed part of the object
Why is the sky blue? The earth is surrounded by an atmosphere.
Answer:
The blue component of the spectrum of visible light has shorter wavelengths and higher frequencies than the red component. Thus, as sunlight of all colors passes through air, the blue part causes charged particles to oscillate faster than does the red part. The faster the oscillation, the more scattered light is produced, so blue is scattered more strongly than red. For particles such as air molecules that are much smaller than the wavelengths of visible light the difference is dramatic. The acceleration of the charged particles is proportional to the square of the frequency, and the intensity of scattered light is proportional to the square of this acceleration. Scattered light intensity is therefore proportional to the fourth power of frequency. The result is that blue light is scattered into other directions almost 10 times as efficiently as red light.
If the mass of the cart was increased but the hanging mass remained the same, how would the acceleration be affected? Explain how you know in terms of net force and system mass.
Answer:
It is always said that mass is same everywhere.
what color of colors of light does red glass absorb
You're watching a movie and all of a sudden the main character slips and pushes the cake he was holding into the ground. The equal but opposite reaction to the cake hitting the ground is...
A. The ground pushing against the main character
B. The cake pushing against the main character
C. The main character pushing against the cake
D. The ground pushing against the cake
Answer:
C?
Explanation:
I think its c cuz the character would be falling and cakes don't bounce when they fall, they just splat
also can we pretend i was watching demon slayer when this happens
4) The object that changes its position relative to a fixed point with time is called ..
which describes an object in projectile motion
Answer:
Gravity acts to push the object sideways
Explanation:
projectile motion is a motion that moves along a curved path under the action of gravity only. Hope this helps!
Alannah added a strip of zinc to a beaker containing a solution of copper
sulfate, as shown in the photo. She expected to observe the immediate
formation of solid copper in the beaker but saw no evidence of a reaction.
Alannah predicted that the reaction was happening too slowly to observe.
Which statement could best explain this result?
The solution of copper sulfate was too cold
Explanation:
The lack of an observable reaction when adding a zinc strip to a copper sulfate solution could be due to the zinc not being reactive enough, the reaction occurring too slowly, or an experimental error.
What is the lack of an observable reaction?The lack of an observable reaction refers to a situation where no visible or measurable change occurs when two or more substances are mixed or brought into contact with each other, even though a reaction was expected based on the chemical properties of the substances involved.
Here in the Question,
The lack of an observable reaction when Alannah added a strip of zinc to a beaker containing a solution of copper sulfate could be due to the following reasons:
Zinc and copper sulfate do not react: It is possible that the zinc strip and copper sulfate solution do not react with each other, leading to no observable change. This could occur if the zinc strip is not reactive enough to displace the copper in the copper sulfate solution.
Reaction is slow: Another possibility is that the reaction between zinc and copper sulfate is occurring but is happening too slowly to be observed. In this case, the reaction rate may be too low to produce an observable amount of solid copper in the beaker in a short period of time.
Experimental error: It is also possible that an error was made during the experiment that prevented the expected reaction from occurring. For example, the concentration of the copper sulfate solution may have been too low, or the zinc strip may have been coated with a layer of oxide that prevented it from reacting with the solution.
Therefore, Zinc may not be sufficiently reactive, the reaction may proceed too slowly, or there may have been a mistake in the experiment if there was no detectable reaction when a zinc strip was added to a copper sulphate solution.
To learn more about redox reaction click:
brainly.com/question/2671074
#SPJ2
A 1,500 kg car is at rest on a level track. The driver gives the engine gas and the car begins to accelerate forward. The car moves from 0 m/s to 27 m/s in 8 sec. What is the acceleration of the car?
Answer:
3.375 m/s²
Explanation:
Using equation of motion:
v = u + at
Here, v = 27m/s & u = 0m/s & t = 8 sec
Let the acceleration be a.
=> 27 = 0 + 8(a)
=> 27/8 = a
=> 3.375 m/s²
HELP!
Which of the following is true about having too little body fat?
Too little body fat can help increase your metabolism
Too little body fat is a health risk
Too little body fat can cause a heart attack
Too little body fat is good for your overall health
Which of the following is a Myth about fat loss?
Most people who are high in body fat eat too much
Any exercise that burns calories will cause the body's general fat deposit to decrease
You can lose body fat over time with regular physical activity if your calorie intake is less than calories burned in a given day
You can spot-reduce by exercising a specific body part to lose fat in that area
Which of the following statements is true about Metabolism?
Your metabolism speeds up naturally as you get older
Your basal metabolism is the amount of energy (calories) your body uses just to keep you living.
You can never speed up or slow down your body's metabolism
Your metabolism is not affected your heredity, age, and maturation
Answer:
too little body fat is a health risk
Explanation:
IF you do not have enough body fat you can have bad things happen to you
How does a pendulum model an energy conversion system?
NO LINKS!
Answer:As a pendulum swings, its potential energy converts to kinetic and back to potential. ... A swinging pendulum.
Explanation:During the course of a swing from left to right, potential energy is converted into kinetic energy and back.
Which is a disadvantage of using wind as an energy source?
It may be unreliable.
It is not naturally occurring.
It produces a lot of waste.
It generates large amounts of electricity.
Answer:
it produces
Explanation:
a lot of waste
In an ecosystem,disadvantage of using wind as an energy source is that it produces a lot of waste.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/13979184
#SPJ7
What is the equivalent resistance of a circuit that contains four 75.0 resistors connected in parallel with a 100.0 V battery?
Answer:
18.75 ohms.
Explanation:
From the question,
]When four resistors are connected in parallel in a circuit,
The equilvalent resistor is given as
1/R' = 1/R₁+1/R₂+1/R₃+1/R₄............................Equation 1
Where R' = Equivalent resistor.
Given: R₁ = R₂ = R₃ = R₄ = 75.0 ohms.
Substitute these values into equation 1
1/R' = (1/75)+(1/75)+(1/75)+(1/75)
1/R' = 4/75
R' = 75/4
R' = 18.75 ohms.
Hence the equivalent resistance = 18.75 ohms.
Answer:
18.8 ohms
Explanation:
apax
What is related to the force that causes electric charges to flow.uses answers below
Answer:
Im going to say voltage. It matches with my notes but it says voltage difference so i hope this helps!
Explanation:
Calculate the amount of heat needed to convert 0.8 kg of ice at -19 °C into water at 29 °C.
This problem has been solved! See the answer A 21.5 kg person climbs up a uniform 85 N ladder. The upper end of the ladder rests on a frictionless wall. The bottom of the ladder rests on a floor with a rough surface. The angle between the horizontal and the ladder is 59 ◦. The person can climb 78 % up the ladder before the base of the ladder slips on the floor. What is the coefficient of static friction µs between the base of the ladder and the floor? The acceleration of gravity is 9.8m/s 2 .
Answer:
μ = 0.179
Explanation:
For this exercise we use the rotational equilibrium condition, where we set a reference system at the top of the ladder where it is in contact with the parent, we will assume the counterclockwise rotations as positive
∑ τ = 0
W_stairs x/2 + W_man x’+ fr y - N x = 0
fr y = -W_stairs x/2 - W_man x’ + N x
let's use trigonometry for distances
* the man up the ladder 78%
l ’= 0.78 L
cos 59 = x ’/ l’
x’= 0.78 L cos 59
* the horizontal distance
cos 59 = x / L
x = L cos 59
* vertical distance
sin 59 = Y / L
y = L sin 59
we substitute
fr L sin 59 = -W_stairs Lcos59 / 2 - W_man 0.78 L cos59 + N L cos59
fr sin 59 = - ½ W_stairs cos 59 - 0.78 W_man cos 59 + N cos 59
fr = ctan 59 (N - ½ W_stairs - 0.78 W_man) (1)
Let's write the translational equilibrium equations
Y axis
N -W_stairs - W_man = 0
N = W_stairs + W_man
N = 85 + 21.5 9.8
N = 295.7 N
we substitute in 1
fr = ctg 59 (295.7 - ½ 85 - 0.78 21.5 9.8)
fr = 0.6 (295.7 - 42.5 - 164.346)
fr = 52.89 N
the expression for the friction force is
fr = μ N
μ = fr / N
μ = 52.89 / 295.7
μ = 0.179
Daylon's family just bought a new puppy, and Daylon decided to take him for a walk. He put the puppy in a wagon and pulled the wagon along the sidewalk. From which of these reference points does the puppy appear to be moving? 1. Daylon 2. The wagon 3. The sidewalk 4. The puppy's collar
The puppy was not moving relative to Daylon, the wagon, or his collar.
He was moving relative to a point on the sidewalk.
Note that the puppy did NOT get his walk.
Convection currents will transfer heat throughout a gas until what condition arises?
A.
The gas condenses and forms a liquid.
B.
The gas particles stop moving entirely.
C.
The gas has the same temperature throughout.
D.
The gas has no thermal energy in it.
Answer:
C
Explanation:
pls mark brainlest ty
have a good day
The gas has the same temperature throughout. (C)
Humpty Dumpty (5 kg) is about to a bungee jump from a 50-meter high bridge. Feeling nervous, he paces back and forth with a velocity of 2 m/s. What is Humpty Dumpty's GRAVITATIONAL POTENTIAL ENERGY before jumping?
Answer:
E = 2450 J
Explanation:
Given that,
Mass of Humpty Dumpty, m = 5 kg
He jumps from a 50 m high bridge.
Feeling nervous, he paces back and forth with a velocity of 2 m/s.
We need to find Humpty Dumpty's gravitational potential energy before jumping. The formula is given by :
[tex]E=mgh\\\\E=5\times 9.8\times 50\\\\E=2450\ J[/tex]
So, the required gravitaional potential energy is 2450 J.
The cornering performance of an automobile is evaluated on a skid pad, where the maximum speed that a car can maintain around a circular path on a dry, flat surface is measured. Then the centripetal acceleration, also called the lateral acceleration, is calculated as a multiple of the free-fall acceleration g. The main factors affecting the performance of the car are its tire characteristics and suspension system. A Dodge Viper GTS can negotiate a skid pad of radius 61.0 m at 86.5 km/h. Calculate its maximum lateral acceleration.
Answer:
0.04g
Explanation:
Since it lateral acceleration is is its centripetal acceleration, the centripetal acceleration, a is given by
a = v²/r where v = speed of Dodge Viper GTS= 86.5 km/h = 86.5 × 1000 m/3600 s = 24.03 m/s and r = radius of skid pad = 61.0 m.
So, a = v²/r
= 24.028 m/s ÷ 61.0 m
= 0.394 m/s²
So, its maximum lateral acceleration is 0.394 m/s². Since g = acceleration due to gravity = 9.8 m/s²
a/g = 0.394 m/s² ÷ 9.8 m/s² = 0.04
So, a = 0.0402g
a ≅ 0.04g
To 3 significant digits, what is the period of the pendulum using the equation for the period of a simple pendulum? Hint, the information you need is on the right side of the screen. The equation for the period of a pendulum is: T = 24 V
Answer:
1.42 seconds
Explanation:
T=2*pi*(sqrt length over gravity)
T=2*pi*(sqrt 0.5/9.8)
T=1.4189
Round to 3 significant digits
T=1.42 seconds