Two or greater sources are said to be coherent if they emit waves that have the identical wavelength (or frequency) and amplitude and which maintain a steady phase difference.
Do two coherent sources have equal wavelength?If two sources have the identical wavelength, frequency, and segment difference, they are said to be coherent. Therefore, we can conclude that coherent sources have the identical wavelength.
Two microwave coherent factor sources emitting waves of wavelenths λare positioned at 5λdistance apart. The interference is being observed on a flat non-reflecting surface alongside a line passing through on sources ,in a course perpendicular to the line joining the two sources
Learn more about coherent waves here:
https://brainly.com/question/12495315#SPJ1A U-tube is open to the atmosphere at both ends. Water is poured into the tube until the water rises part-way along the straight sides, and then some oil with a density of is poured into one end. This causes the water surface on that side of the tube to go down by and the surface on the other side to go up by the same amount. How much higher is the top surface of the oil on that side of the tube compared with the surface of the water on the other side of the tube?
The top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.
Describe principle of hydrostatics?The principle of hydrostatics, also known as Pascal's principle, states that when an external pressure is applied to a fluid in a container, that pressure is transmitted uniformly in all directions within the fluid, regardless of the shape or volume of the container. In other words, the pressure applied to a confined fluid will be distributed evenly throughout the fluid and will not change in magnitude at any point within the fluid. This principle is important in a number of applications, such as hydraulic systems, which use fluids to transmit force and pressure from one point to another. It is also used to explain how liquids exert pressure on the walls of their container and how objects can float or sink in fluids.
We can use the principles of hydrostatics to solve this problem. Let's call the height difference between the two water surfaces h. We can assume that the oil completely covers the water on one side of the tube and does not mix with it, so the oil and water form two separate liquid columns with a common interface. Let's call the height difference between the oil and water surfaces on the same side of the tube H.
The pressure at any given point in a fluid depends only on the depth of that point below the surface of the fluid and the density of the fluid. Since the two water columns are at the same height, they experience the same pressure from the atmosphere. Similarly, the two oil columns experience the same pressure from the atmosphere.
Now consider a point on the interface between the oil and water on the same side of the tube. This point is at a depth of h+H below the water surface on the other side of the tube, so the pressure at this point is greater than atmospheric pressure by an amount equal to the product of the density of water, the acceleration due to gravity, and the total depth (h+H):
P = Patm + ρwatergh
where P is the pressure at the interface, Patm is atmospheric pressure, ρwater is the density of water, g is the acceleration due to gravity, and h+H is the total depth.
Similarly, the pressure at this point is less than atmospheric pressure by an amount equal to the product of the density of oil, the acceleration due to gravity, and the depth of the oil column (H):
P = Patm - ρoilgH
Since the interface between the oil and water is at the same pressure, we can equate these two expressions for P:
Patm + ρwatergh = Patm - ρoilgH
Solving for H, we get:
H = h(ρwater/ρoil)
Substituting the given values, we get:
H = 0.6h
Therefore, the top surface of the oil on that side of the tube is 0.6 times higher than the surface of the water on the other side of the tube.
To know more about pressure visit:
https://brainly.com/question/20816077
#SPJ1
Calculate the density of each ball. Use the formula D = m/V
where D is the density, m is the mass, and V is the volume. Record your calculations in Table A of your Student Guide.
What is the density of the table tennis ball? Record your answer to the nearest hundredth.
___ g/cm3
What is the density of the golf ball? Record your answer to the nearest hundredth.
___g/cm3
table tennis ball: 0.07 density of the table tennis ball
golf ball: 1.37 density of the golf ball
A golf ball or a table tennis ball, which has the higher density?Because a golf ball has more material in a comparable volume than a table tennis ball, it is denser.
The tennis ball floats because, in general, it is positively buoyant (less dense than water) and hence floats on the sea.
When the force of gravity, which pulls the ping pong ball downward, equals the force of the air stream from the hair drier, the ball "floats" in the air at a position where they are both equal. (which is pushing the ping pong ball up). Bernoulli's Principle is what is meant by this.
learn more about Bernoulli's Principle
https://brainly.com/question/13344039
#SPJ1
A researcher investigated whether job applicants with popular (i.e. common) names are viewed more favorably than equally qualified applicants with less popular (i.e. uncommon) names. Participants in one group read resumes of job applicants with popular (i.e. common) names, while participants in the other group read the same resumes of the same job applicants but with unpopular (i.e. uncommon) names. The results showed that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level
The researcher did not find strong evidence to support the idea that job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.
What factors plan an important role in the hiring process for a job?It sounds like the researcher conducted an experiment to investigate whether job applicants with popular names are viewed more favorably than equally qualified applicants with less popular names.
Based on the information provided, the researcher found that the differences in the evaluations of the applicants by the two groups were not significant at the .001 level.
The factors that play an important role in the hiring process for a job:
(1) Qualifications and experience: Employers typically look for candidates who possess the necessary qualifications and experience for the job. This includes education, training, certifications, and work experience.
(2) Skills and abilities: Employers also consider a candidate's skills and abilities related to the job. These may include technical, interpersonal, communication, and problem-solving skills.
(3) Personal characteristics: Personal characteristics, such as motivation, work ethic, and adaptability, can also play a role in the hiring process. Employers may look for candidates who demonstrate a positive attitude, a willingness to learn, and the ability to work well with others.
(4) Fit with company culture: Companies may also consider whether a candidate fits with their company culture, values, and mission. This can include factors such as teamwork, creativity, and innovation.
Learn more about evaluations here:
https://brainly.com/question/20067491
#SPJ1
a wave has a frequency of 40 hertz and a wavelength of 2 meters . what is the wave speed ?
Answer:
[tex]80\; {\rm m\cdot s^{-1}}[/tex].
Explanation:
The frequency [tex]f[/tex] of a wave is the number of cycles completed in unit time ([tex]1\; {\rm s}[/tex] in this example.) In this question, [tex]f = 40\; {\rm s^{-1}}[/tex] ([tex]1\; {\rm Hz} = 1\; {\rm s^{-1}}[/tex]) means that the wave would complete [tex]40[/tex] cycles in every [tex]1\; {\rm s}[/tex].
The wavelength [tex]\lambda[/tex] of a wave is the distance the wave travels in each cycle. It is given that [tex]\lambda = 2\; {\rm m}[/tex].
The goal is to find the wave speed, which is the distance that this wave travels in unit time ([tex]1\; {\rm s}[/tex].)
In this question, it is given that [tex]\lambda = 2\; {\rm m}[/tex] and [tex]f = 40\; {\rm s^{-1}}[/tex]. Thus, this wave would travel a total of [tex]40\, (2\; {\rm m}) = 80\; {\rm m}[/tex] for the [tex]40[/tex] cycles completed in each unit time of [tex]1\; {\rm s}[/tex] ([tex]\lambda = 2\; {\rm m}[/tex] for each cycle.) The speed of this wave would be [tex]80\; {\rm m\cdot s^{-1}}[/tex].
Formally, the speed [tex]v[/tex] of this wave can be found by multiplying the wavelength [tex]\lambda[/tex] of this wave by its frequency [tex]f[/tex]:
[tex]\begin{aligned}v &= \lambda\, f \\ &= (2\; {\rm m})\, (40\; {\rm s^{-1}) \\ &= 80\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
The element of an electric fire with an output of 1.5kw is a cylinder 0.3m long and 0.04 in radius calculate temperature if it behave as black body
The temperature of the electric fire element is 18.3 K
How do we calculate?
We use the formula at:
P = σAT^4
where P= power radiated,
A = surface area of the black body,
σ =Stefan-Boltzmann constant (5.67 × 10^-8 W/m^2K^4),
T = temperature in Kelvin.
P = 1500 W
The surface area of a cylinder is gotten by:
A = 2πrh + 2πr^2
A = 2π(0.04 m)(0.3 m) + 2π(0.04 m)^2
A = 0.0902 m^2
Substituting the values into the Stefan-Boltzmann law, we have:
1500 W = (5.67 × 10^-8 W/m^2K^4)(0.0902 m^2)T^4
T^4 = 4196.9
T = 18.3 K
Learn more about surface area at: https://brainly.com/question/951562
#SPJ1
A 0.80kg block of carbon (solid) is dropped into 1.4kg of water. If the carbon starts at -20C, the water starts at 92C, and they have equal final temperatures, what is the final temperature of the system?
The system's final temperature is roughly 16.7°C.
What is a system's final temperature?You may determine your substance's final heat by multiplying the temperature change by the initial temperature. Your water's final temperature would be 24 + 6, or 30 degrees Celsius, for instance, if it started off at 24 degrees Celsius.
The following is the formula for energy conservation:
Q1 + Q2 = 0
Q = mcΔT
Q1 + Q2 = 0
568.8
Simplifying and solving for
6394.4 - 106768 = 0
= 16.7°C
To know more about temperature visit:-
https://brainly.com/question/4160783
#SPJ1
WILL MARK BRAIN THING HURRY PLS
Imagine that you are an extraterrestrial creature who lives in the extrasolar planetary system where Proxima-b resides. You are studying the Sun, which to you appears to be an exceptionally bright star. You do not know it, but your optical technology is almost identical to humanity’s optical technology. What evidence might indicate to you that (a) planets orbit that star (the Sun) and (b) that at least one of those planets appears to lie within the habitable zone and would thus be a potentially habitable planetary body?
a.) The evidence for planets orbiting the Sun might be :
Periodic variations in the brightness of the SunChanges in the position of the starb. Evidence for potentially habitable planets might come in the form of
Transit observationsSpectral observationsWhat is meant by planets?A planet is described as a celestial body that is in orbit around the Sun, has sufficient mass for its self-gravity to overcome rigid body forces so that it assumes a hydrostatic equilibrium (nearly round) shape, and has cleared the neighborhood around its orbit.
There is a slight decrease in the brightness of the star as planets pass in front of it, blocking a fraction of its light.
The extraterrestrial being might notice periodic fluctuations that are consistent with a planet's orbital period if it can track the Sun's brightness over time.
Learn more about planets at: https://brainly.com/question/28430876
#SPJ1
For every baryon in the Universe, there are about 109 photons. The ratio of photons to baryons has been
constant since a few seconds after the big bang. This is a crucial number that sets the stage for much of
the future evolution of the Universe. If the number were just a little different, the Universe would be a
very different place, and life could possibly not exist. In this question we will use the photon-to-baryon
ratio to work out the redshift at which the Universe becomes dominated by matter, instead of by
radiation.
Assume that most of the photons in the present Universe are cosmic microwave radiation photons that
are a relic of the big bang. (It turns out that this is not a bad assumption). For simplicity, also assume
that all the photons have the energy corresponding to the wavelength of the peak of a 2.73K black-body
radiation curve. At approximately what redshift will the energy density in radiation be equal to the
energy density in matter?
The Universe became dominated by matter instead of radiation at a redshift of around 3300.
To determine at what redshift the Universe became dominated by matter, we need to find the redshift at which the energy density of matter becomes equal to the energy density of radiation.
Let's start with the energy density of radiation, which can be calculated using the Stefan-Boltzmann law:
$[tex]u_{rad} = \frac{4\sigma}{c}T^4$[/tex]
where $\sigma$ is the Stefan-Boltzmann constant, $c$ is the speed of light, and $T$ is the temperature of the radiation. Since we are assuming that the cosmic microwave radiation is a black-body radiation, we can use the temperature of 2.73 K, which corresponds to the peak of the radiation curve:
[tex]$u_{rad} = \frac{4\sigma}{c}(2.73K)^4 \approx 0.261 \text{ eV/cm}^3$[/tex]
Next, let's calculate the energy density of matter. We know that the number density of baryons is [tex]$n_b \approx \frac{1}{10^9}n_{\gamma}$, where $n_{\gamma}$[/tex] is the number density of photons. Since we are assuming that the photon-to-baryon ratio is constant, we can write:
[tex]$\frac{\rho_b}{\rho_{\gamma}} = \frac{m_b n_b}{\frac{4}{3}\sigma T^4} = \frac{3m_b}{4\sigma T^3 n_{\gamma}} \approx \frac{3m_b}{4\sigma T^3}\frac{1}{n_{\gamma}}$[/tex]
where $m_b$ is the mass of a baryon. Substituting the values, we get:
[tex]$\frac{\rho_b}{\rho_{\gamma}} \approx 4.15 \times 10^{-10}$[/tex]
Since the total energy density of the Universe is given by:
[tex]$\rho_{tot} = \rho_b + \rho_{\gamma}$[/tex]
we can write:
[tex]$\frac{\rho_b}{\rho_{tot}} = \frac{\rho_b}{\rho_b + \rho_{\gamma}} \approx \frac{\rho_b}{\rho_{\gamma}} = 4.15 \times 10^{-10}$[/tex]
At the redshift $z$, the energy density of radiation will be diluted by a factor of $[tex](1+z)^4[/tex]$, while the energy density of matter will be diluted by a factor of $[tex](1+z)^3[/tex]$. Thus, at some redshift $z$, we will have:
$ [tex]\frac{\rho_b}{\rho_{tot}} = \frac{\rho_b}{\rho_b + \rho_{\gamma}} = \frac{1}{1+z}\frac{3m_b}{4\sigma T^3 n_{\gamma}}[/tex] $
Setting this equal to the value we calculated above, we can solve for $z$:
$ [tex]\frac{1}{1+z}\frac{3m_b}{4\sigma T^3 n_{\gamma}} \approx 4.15 \times 10^{-10}[/tex] $
$ [tex]1+z \approx \frac{3m_b}{4\sigma T^3 n_{\gamma}}\frac{1}{4.15 \times 10^{-10}}[/tex] $
$ [tex]z \approx 3300[/tex] $
Therefore, the Universe became dominated by matter instead of radiation at a redshift of around 3300.
To know more about density:
https://brainly.com/question/29775886
#SPJ1
A large piston in a hydraulic lift has an area of 100 cm2. The force needed to a small piston with an area of 15 cm2 to lift a 1800 kg car is _ kg
The force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).
The hydraulic lift works based on Pascal's principle, which states that the pressure applied to a confined fluid is transmitted equally in all directions throughout the fluid.
Assuming there is no loss of energy due to friction or other factors, the force exerted on the small piston will be equal to the force exerted on the large piston. This can be expressed as:
F1/A1 = F2/A2
where F1 is the force exerted on the large piston, A1 is the area of the large piston, F2 is the force exerted on the small piston (which we want to find), and A2 is the area of the small piston.
We can rearrange this equation to solve for F2:
F2 = (F1/A1) x A2
Given that the area of the large piston is 100 cm², we can calculate the force exerted on the large piston by using the weight of the car and the gravitational acceleration:
F1 = m x g = 1800 kg x 9.81 m/s² = 17,658 N
Substituting the values into the equation, we get:
F2 = (17,658 N / 100 cm2) x 15 cm² = 2,649 N
Therefore, the force needed to lift the 1800 kg car with the small piston is 2,649 N or approximately 270 kg (since 1 kg is equal to 9.81 N).
To know more about Pascal's principles, visit:
https://brainly.com/question/30258629
#SPJ1
please help me in this exercise
a. We can actually see here that the girl have kinetic energy which is respect to the escalator.
b. The kinetic energy does not depend on the chosen reference.
What is kinetic energy?Kinetic energy is a form of energy that an object possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its current velocity. Kinetic energy is a scalar quantity, meaning it only has magnitude and no direction. The formula for calculating kinetic energy is:
KE = 1/2 × m × v²
Where KE is the kinetic energy, m is the mass of the object, and v is its velocity.
The concept of kinetic energy was first introduced by the French mathematician Gaspard-Gustave de Coriolis in 1829. It was later developed by other scientists such as James Prescott Joule and Hermann von Helmholtz.
Learn more about kinetic energy on https://brainly.com/question/8101588
#SPJ1
Water flows through a pipe of
radius 0.0250 m at 1.50 m/s.
What is the Volume Flow Rate?
(Keep 3 sig figs.)
(Unit=m^3/s)
Help please
5. Two equal charges are situated in a vacuum 10.0cm apart, if they repel each other with a force of 0.5N, calculate the value of the charge on each. [4π)¹ = 9.0 x 10⁹ I
The value of the charge on each particle is [tex]1.05 x 10^-8 C[/tex].
What is Coulomb's law?Coulomb's law is a fundamental principle of electrostatics that describes the interaction between electric charges. It states that the force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. We can use Coulomb's law to solve this problem. Mathematically,
[tex]F = k(q1q2)/r^2[/tex]
where F is the force of attraction or repulsion between the two charged particles,[tex]q1[/tex] and [tex]q2[/tex] are the magnitudes of the charges on the two particles, r is the distance between them, and k is Coulomb's constant, which has a value of [tex]9.0 x 10^9 Nm^2/C^2.[/tex]
In this problem, we know that the charges are equal and the distance between them is 10.0 cm. We also know that the force between them is 0.5 N. Therefore,
[tex]0.5 N = k(q^2)/(0.1 m)^2[/tex]
Solving for q, we get:
[tex]q = \sqrt{[(0.5 N)(0.1 m)^2/k]}[/tex]
[tex]q = \sqrt{(0.5 N)(0.01 m)/(9.0 x 10^9 Nm^2/C^2)}[/tex]
[tex]q = 1.05 x 10^-8 C[/tex]
Therefore, the value of the charge on each particle is [tex]1.05 x 10^-8 C.[/tex]
Learn more about electrostatics here:
https://brainly.com/question/31042490
#SPJ1
A .35 kg block at -27.5 ºC is added to .217 kg of water at 25.0 ºC. They come to equilibrium at 16.4 ºC. What is the specific heat of the block?
Answer:
✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿
To solve this problem, we can use the formula for heat transfer:
q = mcΔT
where q is the heat transferred, m is the mass of the object, c is its specific heat capacity, and ΔT is the change in temperature.
We know that the mass of the block is 0.35 kg and that its initial temperature is -27.5 ºC. We also know that the mass of water is 0.217 kg and that its initial temperature is 25.0 ºC.
When they come to equilibrium at 16.4 ºC, we can calculate how much heat was transferred from the water to the block:
q = mcΔT q = (0.217 kg)(4186 J/kg ºC)(25.0 ºC - 16.4 ºC) q = 1825 J
This amount of heat was transferred from the water to the block, so we can set it equal to the amount of heat absorbed by the block:
q = mcΔT 1825 J = (0.35 kg)c(16.4 ºC - (-27.5 ºC)) 1825 J = (0.35 kg)c(43.9 ºC) c = 148 J/kg ºC
Therefore, the specific heat capacity of the block is 148 J/kg ºC.
Explanation:
(´▽`ʃ♡ƪ)
✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿✿
A rock climber stands on top of a 59 m -high cliff overhanging a pool of water. He throws two stones vertically downward 1.0 s apart and observes that they cause a single splash. The initial speed of the first stone was 1.7 m/s . Include value and units.
a) How long after the release of the first stone does the second stone hit the water?
b) What was the initial speed of the second stone?
c) What is the speed of the first stone as it hits the water?
d) What is the speed of the second stone as it hits the water?
a) The time after the release of the first stone that the second stone hits the water is 2.0 s.
b) 15.7 m/s is the initial speed of the second stone.
c) The speed of the first stone as it hits the water is 15.7 m/s.
d) The speed of the second stone as it hits the water is 28.2 m/s.
What is velocity?Velocity is a vector quantity that measures both the speed and direction of an object's motion. It is equal to the rate of change of an object's position with respect to time. Velocity is usually represented by the symbol v and is measured in meters per second (m/s).
a) The time between first and second stone's release is 1.0 s. Since the time of release of first stone and the time of splash of both stones are same, the time between the release of second stone and the splash of both stones is 1.0 s.
Thus, the time after the release of the first stone that the second stone hits the water is 2.0 s.
b) The initial speed of the second stone can be calculated using the equation of motion,
v² = u² + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (9.8 m/s²), and s is the displacement.
Substituting the values,
v² = (1.7)² + 2(9.8) * 59
v = 15.7 m/s
c) The speed of the first stone as it hits the water can be calculated using the equation of motion,
v² = u² + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (9.8 m/s²), and s is the displacement.
Substituting the values,
v² = (1.7)² + 2(9.8) * 59
v = 15.7 m/s
d) The speed of the second stone as it hits the water can be calculated using the equation of motion,
v² = u² + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration due to gravity (9.8 m/s²), and s is the displacement.
Substituting the values,
v² = (15.7)² + 2(9.8) * 59
v = 28.2 m/s
For more questions related to initial speed
https://brainly.com/question/24493758
#SPJ1
Raphael wants to test the effect of different food types on the growth rate of mice. He measures the mass of thirty mice and separates them into three groups. Each group is given a different type of feed. All of the mice are kept in identical environments and given access to clean water.
After three months, Raphael measures the mass of the mice again. The results of Raphael's experiment are shown below.
Food Type Average Growth (g)
oat grains 1.5 g
cereal flakes 0.3 g
sunflower seeds 2.1 g
Which of the following is a fact that Raphael can determine from his experiment?
A.
Mice do not like the taste of cereal flakes.
B.
Sunflower seeds are the best type of food to feed pet mice.
C.
Mice that ate sunflower seeds gained an average of 2.1 grams.
D.
Bigger mice are more desirable as pets than smaller mice.
Mice that ate sunflower seeds gained an average of 2.1 grams that Raphael can determine from his experiment. Each group is given a different type of feed.
What is grams ?Grams (g) is a unit of measurement for mass in the International System of Units (SI). It is the base unit of mass in the SI, and is defined as being equal to the mass of a physical prototype, which is kept at the International Bureau of Weights and Measures. In practical terms, 1 gram is equal to 0.0352739619 ounces, or 0.00220462262 pounds. Grams are often used to measure the weight of food, medicines, and other small objects.
To learn more about grams
https://brainly.com/question/30337264
#SPJ1
40 POINTS!!!
A wave travels along a stretched horizontal rope. The vertical distance from crest to trough for this wave is 18 cm and the horizontal distance from crest to trough is 26cm.
Part A
What is the wavelength of this wave?
Express your answer using two significant figures
Part B
What is the amplitude of this wave?
Express your answer using two significant figures.
part a. the wavelength of this wave is 26 cm
part b. The amplitude (A) of a wave is 9 cm
What is wavelength?The wavelength (λ) of a wave is described as the distance between two consecutive points on the wave that are in phase.
In this scenario, the distance between two corresponding points on the wave will be equal to the horizontal distance from crest to trough, which is 26 cm.
Hence, the wavelength of the wave is: λ = 26 cm
The amplitude (A) of a wave is described as the maximum displacement of a particle from its rest position as the wave passes through it.
In this scenario, the vertical distance from crest to trough is 18 cm, which is equal to twice the amplitude.
Learn more about amplitude at:
https://brainly.com/question/3613222
#SPJ1
If the speed of a wave is 400 cm/s with a frequency of 80 Hz, what is the wavelength for this wave?
32,000 cm
32,000 m
5 cm
5m
5) A Brachiosaurus moves with a momentum of 134,052 kgm / s What is the Brachiosaurus' mass it is moving at 3.9m / s ?
The mass of Brachiosaurus moves with a momentum of 134,054 kgm/s and the velocity is 3.9 m/s, which is 34.37 kg.
The momentum is the product of mass and velocity. The momentum is the vector quantity and the unit of momentum is Kgm/s.
Momentum = mass × velocity
mass = momentum/velocity
momentum = 134,052 kgm / s
velocity = 3.9 m/s
mass = 134052 / 3.9
= 34.37 kg
Thus, the mass of Brachiosaurus is 34.37 kg.
To learn more about Momentum :
https://brainly.com/question/30677308
#SPJ1
I need help please thank you .:)
Protons, neutrons, and electrons are the three main subatomic particles that make up atoms.
What is mass number and what is the mass number, number of protons, neutrons, and electrons of the given elements?An oxygen atom has 8 protons, 8 electrons, and its number of neutrons may vary depending on the isotope of oxygen. The more frequently encountered isotope of oxygen is oxygen-16, with 8 neutrons.
The element with 13 protons is aluminum (Al). To find the mass number, we add the number of protons and neutrons in the nucleus. Therefore, the mass number of this aluminum isotope would be 13 + 14 = 27.
If an atom has 7 electrons, it must be nitrogen (N), which has an atomic number of 7.
Number of neutrons = Mass number - Atomic number
Thus, we obtain the number of neutrons by the equation: 14 - 7 = 7
Learn more about elements in the periodic table here:
https://brainly.com/question/14347616
#SPJ1
What would be the intensity of a sound wave produced by a 150 Watt speaker from a distance of 5.8 meters? (write your answer to two digits)
The relationship between a sound wave's intensity and pressure amplitude (also known as pressure variation p) is. I is equal to (p) 2 2 v w, where is the thickness of the substance that the sound is contained in.
Describe a sound wave.
Hence, a sound wave is made up of periodically occurring compressions and compression and rarefaction, or areas of high and low pressure, that are travelling at a specific pace. In other words, it consists of a regular (i.e., oscillating or vibrating) change in pressure that takes place around the optimum pressure that is present at a specific time and location.
A sound wave is created by a speaker in what way?
A speaker creates a sound by vibrating a cone, which causes air molecules to vibrate. A speaker in Figure 17.2. 2 vibrates with a consistent frequency and amplitude, causing motions in the molecules of the surrounding air. The speaker transfers power to the air as it vibrates back and forth, primarily as thermal energy.
To know more about sound wave visit:
https://brainly.com/question/11797560
#SPJ1
The length of the river span of a bridge is 2799.0 ft. The total length of the bridge is 6998ft. Convert the length of the river span of the bridge to meters.
According to the question the length of the river span of the bridge in meters is 853.3232 m.
What is Length?Length is a physical quantity that measures the distance between two points. It is one of the fundamental units in the International System of Units (SI). It is usually measured in meters, although it can also be measured in other units such as centimeters, kilometers, feet, yards, miles, and so on.
The length of the river span of the bridge is 2799.0 ft. To convert this length to meters, we need to use a conversion factor. There are 0.3048 meters in one foot, so the conversion factor we will use is 1 ft
= 0.3048 m.
To convert 2799.0 ft to meters, we multiply by the conversion factor:
2799.0 ft * 0.3048 m/ft
= 853.3232 m
Therefore, the length of the river span of the bridge in meters is 853.3232 m.
To learn more about Length
https://brainly.com/question/20599103
#SPJ1
1. A kid jumps straight up at 7.20 m/s. How long will he remain in the air?
The time takes the kid to remain in the air is 0.735 s.
What is time?Time is the duration of an events. The s.i unit of time is seconds.
To calculate how long the kid will be in the air, we use the formula below.
Formula:
t = (v-u)/g.................................... Equation 1Where:
t = Timev = Final Velocityu = Initial velocityg = Acceleration due to gravityFrom the question,
Given:
u = 7.20 m/sv = 0 m/sg = -9.8 m/s² (Going against the force of gravity)Substitute these values into equation 1
t = (0-7.20)/-9.8t = -7.20/-9.80t = 0.735 secondsHence, the time is 0.735 s.
Learn more about time here: https://brainly.com/question/10428039
#SPJ1
A model rocket blast off and moves upward with an acceleration of 12m/s2 until it reaches a height of 26m, at which point its engine shuts off and it continues its flight in free fall.
a) What is the maximum height attained by the rocket?
b) What is the speed of the rocket just before it hits the ground?
c) What is the total duration of the rocket's flight?
A 25 kg child plays on a swing having support ropes that are 2.20 m long. A friend pulls her back until the ropes are ăÿÿfrom the vertical and releases her from rest. (a) What is the potential energy for the child just as she is released compared with the potential energy at the bottom of the swing? (b) How fast will she be moving at the bottom of the swing? (c) How much work does the tension in the ropes do as the child swings from the initial position to the bottom?
Answer:
A) P.E = 138.44 J
B) The velocity of swing at bottom, v = 3.33 m/s
C) The work done, W = -138.44 J
Explanation:
Given,
The mass of the child, m = 25 Kg
The length of the swing rope, L = 2.2 m
The angle of the swing to the vertical position, ∅ = 42°
A) The potential energy at the initial position ∅ = 42° is given by the relation
P.E = mgh joule
Considering h = 0 for the vertical position
The h at ∅ = 42° is h = L (1 - cos∅)
P.E = mgL (1 - cos∅)
Substituting the given values in the above equation
P.E = 25 x 9.8 x 2.2 (1 - cos42°)
= 138.44 J
The potential energy for the child just as she is released, compared to the potential energy at the bottom of the swing is, P.E = 138.44 J
B) The velocity of the swing at the bottom.
At bottom of the swing the P.E is completely transformed into the K.E
∴ K.E = P.E
1/2 mv² = 138.44
1/2 x 25 x v² 138.44
v² = 11.0752
v = 3.33 m/s
The velocity of the swing at the bottom is, v = 3.33 m/s
C) The work done by the tension in the rope from initial position to the bottom
Tension on string, T = Force acting on the swing, F
=
= - 2.2 x 25 x 9.8 [cos0 - cos 42°]
= - 138.44 J
The negative sign in the in energy is that the work done is towards the gravitational force of attraction.
The work done by the tension in the ropes as the child swings from the initial position to the bottom of the swing, W = - 138.44 J
If the sun were more massive, what would happen to Earth’s gravity with the sun?
A. decrease
B. would be infinite
C. would be 0
D. increase
Answer: d. increase
Explanation:
If the sun were more massive, the gravitational force between the sun and Earth would increase. This means that Earth's gravity with the sun would also increase. Therefore, the correct answer is (D) increase.
The gravitational force between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. So, if the mass of one of the objects increases, the gravitational force between them will also increase. In this case, if the mass of the sun were to increase, the gravitational force between the sun and Earth would become stronger, and hence, Earth's gravity with the sun would also increase.
an election of mass 9.1 × 10^31kg moves with a velocity of 4.2 × 10^7mJs between the cathode and anode of an X-ray tube. Calculate the wavelength.( take Planck's constant, h= 6.6 × 10^ 34 J's)
The wavelength of the electron is 1.724 × 10^-12 m.
How do we calculate?The wavelength of the electron is found using the de Broglie wavelength formula:
λ = h / p
where λ = wavelength,
h= Planck's constant, a
p = momentum of the electron.
we find the momentum of the electron,
p = m * v
p = (9.1 × 10^-31 kg) * (4.2 × 10^7 m/s)
p = 3.822 × 10^-22 kg m/s
Therefore, wavelength ;
λ = h / p
λ = (6.6 × 10^-34 J s) / (3.822 × 10^-22 kg m/s)
λ = 1.724 × 10^-12 m
Learn more about wavelength at: https://brainly.com/question/10728818
#SPJ1
5. A risk factor is an aspect of the child or environment that increases the probability of poor outcomes.
Name at least two (2) risk factors of childhood and how these factors might affect their ability to learn in
school. (2 Points)
Anyone pls
The two risk factors that can affect the ability of a child to learn in school is poor parenting and malnutrition.
What is a risk factor?A risk factor can be defined as any predisposing factor that can expose an individual to harm.
A risk factor that affects a child is an aspect of the child or environment that increases the probability of poor outcomes.
The two risk factors that can affect the ability of a child to learn in school include the following:
Poor parenting: When there is lack of understanding and love between the couple is affects the emotions of the children.Malnutrition: The brain of the child is yet to fully develop and this can be help through adequate nutrition.Learn more about nutrition here:
https://brainly.com/question/29512118
#SPJ1
30 POINTS!!!! NO CHATGPT OR ANY BOTS_
As you sit in a fishing boat, you notice that 12 waves pass the boat every 45 s
. If the distance from one crest to the next is 9.0 m
, what is the speed of these waves?
Express your answer to two significant figures and include the appropriate units.
The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).
What is wave crest?A wave crest is the highest point of a wave. It is the top of the wave, where the wave is moving most up and away from the equilibrium position. It is the point of highest amplitude (height) of the wave and is followed by a wave trough, which is the lowest point of the wave.
The speed of the waves can be calculated using the formula speed = distance over time.
We know the distance between wave crests is 9.0 m and the time it takes for 12 waves to pass the boat is 45 s. Therefore, the speed of the waves can be calculated as:
Speed = 9.0 m / 45 s
Speed = 0.2 m/s
The speed of the waves can be expressed to two significant figures as 0.2 m/s. The unit for this expression is meters per second (m/s).
This calculation shows that the speed of the waves passing the boat is 0.2 m/s. This speed can be further broken down into how many meters the waves travel in one second if necessary.
For more questions related to speed
https://brainly.com/question/13943409
#SPJ1
How long does it take for radiation from a cesuim-133 atom to complete 1.5 million cycles
A cesium-133 atom's radiation goes through 1.5 million cycles in around 0.1633 microseconds (or 163.3 nanoseconds).
What frequency does one kind of radiation that cesium-133 emits have?9,192,631,770 hertz (cycles per second) is the frequency of the microwave spectral line that the isotope cesium-133 emits. The basic unit of time is provided by this. Cesium clocks have an accuracy and stability of 1 second in 1.4 million years.
The radiation emitted by cesium-133 has a frequency of 9,192,631,770 cycles per second, or 9.192631770 109 Hz.
The following formula may be used to determine how long 1.5 million radiation cycles take to complete:
Time is equal to the frequency of cycles.
Plugging in the numbers, we get:
time = 1.5 million / 9.192631770 × 10^9 Hz
time = 1.632995101 × 10^-7 seconds
So it takes approximately 0.1633 microseconds (or 163.3 nanoseconds) for radiation from a cesium-133 atom to complete 1.5 million cycles.
To know more about cesium-133 visit:-
https://brainly.com/question/4830355
#SPJ1
As you sit in a fishing boat, you notice that 12 waves pass the boat every 45 s. If the distance from one crest to the next is 9.0 m what is the speed of these waves?
Express your answer to two significant figures and include the appropriate units.
The frequency of the waves can be calculated as the number of waves passing a given point per unit of time. In this case, the frequency is:
f = (number of waves) / (time)
f = 12 waves / 45 s
f = 0.267 Hz
The wavelength is the distance between two adjacent wave crests, which is given as 9.0 m in the problem.
What is the speed of these waves?The speed of the wave can be calculated using the formula:
v = f × λ
where v is the wave speed, f is the frequency, and λ is the wavelength.
Substituting the values given, we get:
v = 0.267 Hz × 9.0 m
v = 2.40 m/s
Therefore, the speed of the waves is 2.40 m/s (to two significant figures).
Learn more about wave from
https://brainly.com/question/23739080
#SPJ1