Answer:
d. increases PFK activity, decreases FBPase activity
Explanation:
Fructose-2,6-bisphophate is formed by the phosphorylation of fructose-6-phosphate catalyzed by phosphofructokinase-2, PFK-2.
Fructose-2,6-bisphophate functions as an allosteric effector of the enzymes phosphofructokinase-1, PFK-1 and fructose-1,6-bisphosphatase, FBPase.
Fructose-2,6-bisphophate has opposite effects on the enzymes, PFK-1 and FBPase. When it binds to the allosteric site of the enzyme, PFK-1, it increases the enzymes's activity by increasing its affinity for its substrate fructose-6-phosphate and reduces its affinity for its allosteric inhibitors ATP and citrate. However, when it binds to FBPase, it reduces its activity by reducing its affinity for glucose, its substrate
What is the molar mass of a protein if a solution of 0.020 g of the protein in 25.0 mL of solution has an osmotic pressure of 0.56 torr at 25 ∘ C
Answer:
26.5 kD
Explanation:
Here we can apply the formula ∏ = iMRT, where ∏ = osmotic pressure = 0.56 - ( given ). This is only one part of the information we are given / can conclude in this case ....
i = van’t Hoff factor = 1 for a protein molecule,
R = gas constant = 62.36 L torr / K-mol,
T ( temperature in Kelvin ) = 25 + 273 - conversion factor C° + 273 = 298K
( Known initially ) ∏ = osmotic pressure = 0.56 torr
..... besides the part " M " in the formula, which we have no information on whatsoever, as we have to determine it's value.
_____
Substitute derived / known values to solve for M ( moles / liter ) -
∏ = iMRT
⇒ 0.56 = ( 1 )( M )( 62.36 )( 298 )
⇒ 0.56 = M( 18583.28 )
⇒ M = 0.56 / 18583.28 ≈ 0.00003013461 ....
_____
We know that M = moles / liter, so we can use this to solve for moles, and hence calculate the molar mass by the formula molar mass = g / mol -
M = mol / l
⇒ 0.00003013461 = 0.020 / 25 mL ( 0.025 L ),
0.020 / 0.025 = 0.8 g / L
⇒ 0.8 g = 0.00003013461 moles,
molar mass = 0.8 g / 0.00003013461 moles = 26,548 g / mol = 26.5 kD
Complete ionic equation K2CO3(aq)+2CuF(aq) → Cu2CO3(s)+2KF(aq) Examine each of the chemical species involved to determine the ions that would be present in solution. Be sure to consider both the coefficients and subscripts of the molecular equation, and then write this precipitation reaction in the form of a balanced complete ionic equation. Express your answer as a chemical equation including phases.
Answer:
2K+(aq) + CO3²¯(aq) + Ca^2+(aq) + 2F¯(aq) —› Cu2CO3(s) + 2K+(aq) + 2F¯(aq)
Explanation:
K2CO3(aq) + 2CuF(aq) → Cu2CO3(s) + 2KF(aq)
The complete ionic equation for the above equation can be written as follow:
In solution, K2CO3 and CuF will dissociate as follow:
K2CO3(aq) —› 2K+(aq) + CO3²¯(aq)
CuF(aq) —› Ca^2+(aq) + 2F¯(aq)
Thus, we can write the complete ionic equation for the reaction as shown below:
K2CO3(aq) + 2CuF(aq) —›
2K+(aq) + CO3²¯(aq) + Ca^2+(aq) + 2F¯(aq) —› Cu2CO3(s) + 2K+(aq) + 2F¯(aq)
If a balloon takes up 625L at 273K, what will the new volume be when the balloon is heated to 353K.
Answer:
The new volume will be 808 L
Explanation:
Charles's law is a law that says that the volume of gas at constant pressure is directly proportional to its absolute temperature (in degrees Kelvin), that is, when the amount of gas and pressure are kept constant, the quotient between volume and temperature will always have the same value:
[tex]\frac{V}{T}=k[/tex]
Having a certain volume of gas V1 that is at a temperature T1 at the beginning of the experiment, by varying the volume of gas to a new value V2, the temperature will change to T2 and the following will be fulfilled:
[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]
In this case:
V1= 625 LT1= 273 KV2= ?T2= 353 KReplacing:
[tex]\frac{625 L}{273 K} =\frac{V2}{353 K}[/tex]
Solving:
[tex]V2=353 K*\frac{625 L}{273 K}[/tex]
V2= 808 L
The new volume will be 808 L
Which of the following is an important intermediate in the mechanism of the reaction
in the box?
Answer:
Explanation:
.
what is the concentration in ppm of a solution which is prepared by dissolving in 15mg of nacl in 200ml water
Answer:
Explanation:
In weight/volume (w/v) terms,
1 ppm = 1g m-3 = 1 mg L-1 = 1 μg mL-1
200 mL = 0.2 L
15 / 0.2 mg L-1 =75 ppm
The concentration in ppm of a solution which is prepared by dissolving in 15mg of NaCl in 200ml water is 75 mg/.,
What is ppm?ppm stand for 'part per million' and it is used to define the concentration of any substance as mass of any substance present in per liter of volume of solution, its unit for measurement is mg/L.
Given that, mass of NaCl = 15mg
Volume of solution = 200mL = 0.2L
Concentration in ppm will be calculated as:
ppm = 15/0.2 = 75mg/L
Hence ppm concentration of NaCl is 75 mg/L.
To know more about ppm, visit the below link:
https://brainly.com/question/16877061
#SPJ2
PLEASE HELP ME Calculate the change in boiling point when 0.402 moles of sodium chloride are added to 0.200 kilograms of water. Kf = -1.86°C/m; Kb = 0.512°C/m -2.1°C 2.1°C -7.5°C 7.5°C
Answer:
The change in the boiling point would be 2.1°C.
Explanation:
1 ) Let us first determine the molarity of this solution :
M = mol / kg,
M = 0.402 mol / 0.200 kg = 2.01 M NaCl
2 ) ΔT = i [tex]*[/tex] K [tex]*[/tex] m
ΔT = 2 [tex]*[/tex] 0.512C/m [tex]*[/tex] 2.01m
ΔT = 2.06C
As you can see, this is none of the answer choices. However the van't Hoff factor i in this case was taken to be 2, but this value is actually less than the predicted ideal solution. This is due to the ion pairing, causing i to be around 1.7 to 1.8. Therefore our solution is option b, 2.1°C.
Which is the correct way to write 602,200,000,000 ,000,000,000,000 in scientific notation
Answer:
6.022 × 10^23
hope this helps :)
of all the hydrogen nuclei in the ocean, 0.0156 how much deuterium could be obtained from 1.0 gal of ordinary tap water
Answer:
Poop Butt.
Explanation: Poop Butt.
For the carbonate ion, CO3 2− 1- Draw the electron orbital diagram for the valence electrons of the central carbon before and after hybridization. 2- identify which carbon and oxygen electron orbitals overlap to create each single and double C-O bond in the structure
Answer:
See explanation below
Explanation:
Carbon has four electrons in its outermost shell. The CO3^2- anion is found to be in the trigonal planar geometry. For a carbon atom in the trigonal planar geometry, the carbon is sp2 hybridized. This implies that an s orbital mixes with two p orbitals to yield the hybrid orbitals in the ion.
Carbon forms three double bonds to three oxygen atoms using these hybrid sp2 orbitals. Recall that the actual bonding in each C-O linkage lies between that of a pure C-O single bond and C-O double bonds.
Note that there are two p orbitals and one s orbital participating in this hybridization hence three hybrid orbitals are expected to be formed.
Which of the following reagents should be used to convert to Question 26 options: A) H2, Lindlar's catalyst B) Na, liquid NH3 C) H2 / Nickel D) H2SO4, H2O
Answer: The question is is not complete...here is the complete question.
Which of the following reagents should be used to convert 3-Hexyne to E-3-hexene
Option B.
Na, liquid NH3.
Explanation:
3-Hexyne to E-3-hexene can be converted with by using the reagent of Na, NH3 (birch reduction) and this can be done by hdrogenation of H2.
The reagents NaNH3 convert 3-Hexyne to E-3-hexene because it is a reducing agents that convert or has the ability to reduce alkynes to trans alkenes.
3 Hexyne is an alkynes and it is converted to E- 3 hexene Na and NH3.
Which of the following reagents should be used to convert to Question 2 options: A) Na, NH3 B) H2, Pt C) H2, Lindlar's catalyst D) HgSO4, H2O
Answer:
A
Explanation:
If we intend to achieve the anti addition of Hex-3-yne to yield (E) Hex-3-ene, the we must use Na/NH3. The first step of the reaction involves the transfer of an electron from sodium to the alkene; this yields a radical anion. Strong electron replusion ensues between the single electron and the lone pair on the carbon. This now forces the both to be found at a trans position to each other and this is the basis of the stereochemistry of the product.
Secondly, the radical anion abstracts a proton from ammonia. Another sodium atom transfers an electron leading to the formation of a vinyl carbanion, the alkyl groups are now trans to each other.
This carbanion now abstracts a proton from ammonia and the final product is formed.
When hydrogenation of two alkenes produce the same alkane, the more stable alkene has the___________ smaller heat of hydrogenation.
Explanation:
Heat of hydrogenation of alkenes is a measure of the stability of carbon-carbon double bonds.
In general, the lower the value of the heat of hydrogenation the more stable the double bond of the alkene.
Also, heat of hydrogenation of alkenes always have a negative value.
Molarity of NaOH: From the following data calculate molarity of NaOH. Molar mass of KHP is 204.23 g/mol. Show calculation. Mass of Erlenmeyer flask + KHP 84.847 g Mass of Erlenmeyer flask 84.347 g Mass of KHP ??? Final buret reading 12.25 mL Initial buret reading 0.50 mL Volume of NaOH added ???
Answer:
Explanation:
Mass of Erlenmeyer flask + KHP = 84.847 g
Mass of Erlenmeyer flask = 84.347 g
Mass of KHP = .5 g
moles of KHP = .5 / 204.23
= 2.448 x 10⁻³ moles
moles of NaOH reacted = 2.448 x 10⁻³
Final buret reading = 12.25 mL
Initial buret reading = 0.50 mL
Volume of NaOH added=
Assuming an efficiency of 34.90%, calculate the actual yield of magnesium nitrate formed from 139.6 g of magnesium and excess copper(II) nitrate.Mg+Cu(NO3)2⟶Mg(NO3)2+Cu
Answer:
300.44 g
Explanation:
The balanced equation for the reaction is given below:
Mg + Cu(NO3)2 —> Mg(NO3)2 + Cu
Next, we shall determine the mass of Mg that reacted and the mass of Mg(NO3)2 produced from the balanced equation.
This is illustrated below:
Molar mass of Mg = 24 g/mol
Mass of Mg from the balanced equation = 1 x 24 = 24 g
Molar mass of Mg(NO3)2 = 24 + 2[14 + (16x3)]
= 24 + 2[ 14 + 48]
= 24 + 124 = 148 g/mol
Mass of Mg(NO3)2 from the balanced equation =
1 x 148 = 148 g
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Next, we shall determine the theoretical yield of Mg(NO3)2.
This can be obtained as follow:
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Therefore, 139.6 g of Mg will react to = (139.6 x 148)/24 = 860.87 g of Mg(NO3)2
Therefore, the theoretical yield of Mg(NO3)2 is 860.87 g
Finally, we shall determine the actual yield of Mg(NO3)2 as follow:
Theoretical of Mg(NO3)2 = 860.87 g
Percentage yield = 34.90%
Actual yield of Mg(NO3)2 =?
Percentage yield = Actual yield /Theoretical yield x 100
34.90% = Actual yield /860.87
Cross multiply
Actual yield = 34.90% x 860.87
Actual yield = 34.9/100 x 860.87
Actual yield = 300.44 g
Therefore, the actual yield of Mg(NO3)2 is 300.44 g
Generally, systems move spontaneously in the direction of increasing entropy. TRUE FALSE
Answer:
true
Explanation:
During which part of the scientific method would error bars be used?
A. Conclusion
B. Analysis
C. Hypothesis
D. Research
please helppppppppppp
Answer:
The correct answer is B. Analysis
Explanation:
Error bars are part of the statistical analysis in the scientific method. Once the scientist have collected the data, he or she proceed to the data analysis. A very common way of comparing the data variability is to use error bars in ghaphical representations. From these bars, it can be estimated the error of a determination and experimental groups are compared.
The error bars would be used during B. Analysis.
What is an Error Bar?A blunders bar is a line through a factor on a graph, parallel to one of the axes, which represents the uncertainty or variant of the corresponding coordinate of the point. In IB Biology, the error bars most often represent the same old deviation of an information set.
When would error bars be used?Blunders bars can be used to examine visual quantities if various other situations preserve. This can decide whether or not differences are statistically sizable. Mistake bars can also propose the goodness of match of a given characteristic, i.e., how well the function describes the facts.
Learn more about error bars here: https://brainly.com/question/1413254
#SPJ2
The gas in a 250. mL piston experiences a change in pressure from 1.00 atm to 2.55 atm. What is the new volume (in mL) assuming the moles of gas and temperature are held constant?
Answer:
[tex]\large \boxed{\text{0.980 L}}[/tex]
Explanation:
The temperature and amount of gas are constant, so we can use Boyle’s Law.
[tex]p_{1}V_{1} = p_{2}V_{2}[/tex]
Data:
[tex]\begin{array}{rcrrcl}p_{1}& =& \text{1.00 atm}\qquad & V_{1} &= & \text{250. mL} \\p_{2}& =& \text{2.55 atm}\qquad & V_{2} &= & ?\\\end{array}[/tex]
Calculations:
[tex]\begin{array}{rcl}\text{1.00 atm} \times \text{250. mL} & =& \text{2.55 atm} \times V_{2}\\\text{250. mL} & = & 2.55V_{2}\\V_{2} & = &\dfrac{\text{250. mL}}{2.55}\\\\& = &\textbf{98.0 mL}\\\end{array}\\\text{The balloon's new volume is $ \large \boxed{\textbf{0.980 L}}$}[/tex]
Identify each reaction from the citric acid cycle as an oxidation‑reduction reaction, an esterification reaction, an amidation reaction, a hydrolysis reaction, a hydration reaction, or a dehydration reaction.
1. Which type of reaction occurs when succinyl-CoA is converted to succinate in the citric acid cycle?
2. Which type of reaction occurs when malate is converted to oxaloacetate in the citric acid cycle?
3. Which type of reaction occurs when aconitate is converted to isocitrate in the citric acid cycle?
Answer:
1. Oxidation-reduction and hydrolysis
2. Oxidation-reduction
3. Dehydration
Explanation:
Our options for each reaction are:
a) Oxidation‑reduction reaction
b) Esterification reaction
c) Amidation reaction
d) Hydrolysis reaction
c) Hydration reaction
f) Dehydration reaction
In reaction one the have the rupture of the S-CoA bond. This reaction takes place by the addition of a water molecule and the oxidation to a carboxylic acid group. So, for reaction 1 we will have an oxidation-reduction and a hydrolysis reaction.
For reaction 2, the functional group change from alcohol to a carboxylic acid. So, we have an oxidation-reduction reaction.
In the last reaction, we have the production of a double bond by the removal of water. With this in mind, we have a dehydration reaction.
See figure 1
I hope it helps
Which of these substances has the highest pOH? 0.10 M HCl, pH = 1 0.001 M HNO3, pH = 3 0.01 M NaOH, pH = 12 The answer is 0.10 M HCI, pH=1
Answer:On these combined scales of pH and pH it can be shown that because for water when pH = pH = 7 that pH + pH = 14. This relationship is useful in the inter conversion of values. For example, the pH at a 0.01 M solution of sodium hydroxide is 2, the pH of the same solution must be 14-2 = 12.
Explanation:
The 0.10M HCI, pH = 1 solution has the highest pOH. Therefore, option (1) is correct.
What is the pOH?pOH of a solution can be determined from the negative logarithm of the hydroxide ions concentration in the solution.
The mathematically pOH of the solution can be expressed as:
pOH = -log [OH⁻] ..............(1)
Where [OH⁻] represents the concentration of hydroxide ions in an aqueous solution.
Given, the pH = 1 of HCl
pH + pOH = 14
1 + pOH = 14
pOH = 14 - 1
pOH = 13
Given, the pH = 3 of HNO₃
pH + pOH = 14
3 + pOH = 14
pOH = 14 - 3
pOH = 11
Given, the pH = 12 of NaOH = 0.01 M
pH + pOH = 14
12 + pOH = 14
pOH = 14 - 12
pOH = 2
Learn more about pOH, here:
brainly.com/question/17144456
#SPJ2
Which of the following properties should carbon (C) have based on its position on
the periodic table?
A. Shiny
B. Dense
C. Malleable
D. Poor conductor
Answer:
D- poor conductor
Explanation:
metallic properties decrease as we go on the right of the periodic table. Carbon is a non metal hence it is dull and a poor conductor.
it has a low density and is ductile.
Answer: Poor conductor
Explanation:
Calculate the mass of feso4 that would be produced by 0.5mole of Fe
Answer:76 grams
Explanation:
Fe+H₂SO₄-->FeSO₄+H₂
For one mole of Fe we get 1 mole of feso4, therefore for 0.5 moles of Fe we get 0.5 moles of feso4.
The molar mass of feso4 is AFe+AS+4AO(A is atomic mass)
56+32+4*16=152grams/mole
Now, we need to multiply the number of moles by the molar mass to get the mass that reacts
152*0.5=76 grams
What does the state symbol (aq) mean when written after a chemical
compound in a chemical equation?
A. It means the compound is in the liquid phase.
B. It means the compound is dissolved in water.
C. It means the compound is in the gas phase.
D. It means the compound is in the solid phase.
B. it means the compound is dissolved in water
Answer:
b
Explanation:
a p e x :)
A pharmaceutical company is making a large volume of nitrous oxide (NO). They predict they will be able to make a maximum amount of 4860 grams with the materials they have in stock. From the previous 10 volumes they have made, they know that the percent yield of this reaction is fairly low at 47%. How much will the actual yield be?
Answer:
2284.2 g.
Explanation:
The following data were obtained from the question:
Percentage yield = 47%
Theoretical yield = 4860 g
Actual yield =?
The percentage yield is simply defined as the ratio of actual yield to the theoretical yield multiplied by 100. Mathematically, it is expressed as:
Percentage yield = Actual yield /Theoretical yield x 100
With the above formula, we can obtain the actual yield as follow:
Percentage yield = Actual yield /Theoretical yield x 100
47% = Actual yield /4860
Cross multiply
Actual yield = 47% × 4860
Actual yield = 47/100 x 4860
Actual yield = 2284.2 g
Therefore, the actual yield is 2284.2 g.
Please help asap! Giving brainliest.
What is the total number of electrons that can occupy the p sublevel? (3 points)
Select one:
a. 2 electrons
b. 6 electrons
c. 8 electrons
d. 10 electrons
Answer:
The answer is 6 because the p sublevel holds 3 orbitals and since each orbital can hold 2 electrons, the answer is 3 * 2 = 6.
Answer:
6 electrons
Explanation:
Each principal energy level above the first contains one s orbital and three p orbitals. A set of three p orbitals, called the p sublevel, can hold a maximum of six electrons. So the answer is 6 electrons.
What's the difference between velocity time graph and distance time graph
Explanation:
Hi there!
I attached a photo of a unit summary that states the difference between s-t and v-t graph.
Hope this helps ;) ❤❤❤
What effect does reducing your carbon footprint have on the environment?
increases the greenhouse effect
O reduces the greenhouse effect
O more re-radiated infrared radiation is trapped
O more incoming radiation is let through the atmosphere
Answer:
reduces the greenhouse effect
A glass cylinder contains 2 gases at a pressure of 106 kPa. If one gas is at 7 kPa, what is the pressure of attributed to the other gas? a) 9 kPa b) 99 kPa c) 113 kPa d) 7 kPa e) 2 kPa (URGENT)
Answer:
b) 99 kPa
Explanation:
According to Daltons law of partial pressure, the total pressure of a mixture of two or more non reactive gases is the sum of their individual pressures. Let the total pressure of a mixture of n number of gases be [tex]P_{total}[/tex] and their individual pressure be [tex]P_1,P_2,P_3,\ .\ .\ .\ ,\ P_n[/tex], According to Daltons partial pressure law:
[tex]P_{total}=P_1+P_2+P_3+.\ .\ .+P_n[/tex]
Since A glass cylinder contains 2 gases at a pressure of 106 kPa, therefore n = 2. Also one gas ([tex]P_1[/tex]) is at 7 kPa. Using Daltons partial pressure law:
[tex]P_{total}=P_1+P_2+P_3+.\ .\ .+P_n\\P_{total}=P_1+P_2\\106\ kPa=7\ kPa+P_2\\P_2=106\ kPa-7\ kPa\\P_2=99\ kPa[/tex]
How many mL of calcium hydroxide are required to neutralize 25.0 mL of 0.50 M
nitric acid?
Answer:
6.5 mL
Explanation:
Step 1: Write the balanced reaction
Ca(OH)₂ + 2 HNO₃ ⇒ Ca(NO₃)₂ + 2 H₂O
Step 2: Calculate the reacting moles of nitric acid
25.0 mL of 0.50 M nitric acid react.
[tex]0.0250L \times \frac{0.50mol}{L} = 0.013 mol[/tex]
Step 3: Calculate the reacting moles of calcium hydroxide
The molar ratio of Ca(OH)₂ to HNO₃ is 1:2. The reacting moles of Ca(OH)₂ are 1/2 × 0.013 mol = 6.5 × 10⁻³ mol
Step 4: Calculate the volume of calcium hydroxide
To answer this, we need the concentration of calcium hydroxide. Since the data is missing, let's suppose it is 1.0 M.
[tex]6.5 \times 10^{-3} mol \times \frac{1,000mL}{1.0mol} = 6.5 mL[/tex]
If enough experimental data supports a hypothesis, then it
Answer:
Then the hypothesis is proved and becomes a theory.
If not, then another hypothesis should be proposed and tested.
A 0.500 g sample of tin (Sn) is reacted with oxygen to give 0.534 g of product. What is the percent mass of the tin and percent by mass of oxygen in the sample
Answer:
Percentage mass of Tin = 96.3%
Percentage mass of oxygen = 6.40%
Explanation:
The product of the reaction is an oxide of tin.
Assuming all of the 0.500 g sample of tin reacted with oxygen to produce the oxide:
Mass of oxide = 0.534 g
Mass of tin present in the oxide = 0.500 g
Mass of oxygen in the oxide = 0.534 g of oxide - 0.500 g Sn = 0.034 g O
Percentage composition = mass of element/mass of compound × 100%
Percentage composition of Sn = 0.500 g/0.534 g × 100 = 93.6% Sn
Percentage composition of oxygen = 0.034 g/0.534 g × 100 = 6.40%