Answer:
A. the rate that something moves and is calculated by taking distance divided by time
How far are two protons if they exert a force of 0.5 N on one another?
Answer:
5.08 metres
Explanation:
The both protons should be 5.08 meters apart so that force between them is equal to the weight of electron
The two protons will exert a repulsive force of 0.5 N when they are at a distance of [tex]2.146625 \times10^{-14} \,m[/tex] away from each other.
As protons have very little mass the gravitational force will be negligible. So here we will consider the electrostatic force between them.
According to Coulomb's law in electrostatics, the electrostatic force between two charges can be given by;[tex]F=k\frac{q_{1}q_{2} }{r^2}[/tex]Where [tex]k \approx 9 \times 10^9 \, Nm^2 /C^2[/tex]Here, since both the particles are protons;[tex]q_1 = q_2 = 1.6 \times 10^{-19}\,C[/tex]Given that F = 0.5 NSubstituting the known values in the Coulomb's law equation, we get;[tex]0.5\, N = 9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{r^2}[/tex]
ie; [tex]r= \sqrt{9\times 10^{9} Nm^2 /C^2 \times\frac{(1.6\times 10^{-19}\,C)\times(1.6\times 10^{-19}\,C)}{0.5\, N} } = 2.146625 \times 10^{-14}\,m[/tex]
Learn more about Coulomb's Law here:
https://brainly.com/question/1698562
When turning from your path onto a perpendicular path your speed
SHOULD BE at a STEADY
DRIVERS ED PLEASE HELP
Answer: 5-15MPH
Explanation: Trust me
A proton moves with a speed of 1.00 x 106 m/s perpendicular to a magnetic field, B. As a result, the proton moves in circle of radius 20.0 m. If an electron were moving at the same speed perpendicular to the same magnetic field, what would be the radius of the circle the electron would move in
Answer:
0.0109 m ≈ 10.9 mm
Explanation:
proton speed = 1 * 10^6 m/s
radius in which the proton moves = 20 m
determine the radius of the circle in which an electron would move
we will apply the formula for calculating the centripetal force for both proton and electron ( Lorentz force formula)
For proton :
Mp*V^2 / rp = qp *VB ∴ rp = Mp*V / qP*B ---------- ( 1 )
For electron:
re = Me*V/ qE * B -------- ( 2 )
Next: take the ratio of equations 1 and 2
re / rp = Me / Mp ( note: qE = qP = 1.6 * 10^-19 C )
∴ re ( radius of the electron orbit )
= ( Me / Mp ) rp
= ( 9.1 * 10^-31 / 1.67 * 10^-27 ) 20
= ( 5.45 * 10^-4 ) * 20
= 0.0109 m ≈ 10.9 mm
A freight train car is moving at a constant speed with respect to the ground of Vcg. A man standing on a flatbed car throws a ball into the air and catches it as it falls. Relative to the flatbed car, the initial velocity of the ball is Vibc straight up. a. What are the magnitude and direction of the initial velocity of the ball as seen by a second man standing on the ground next to the track
Answer:
chiicken
Explanation:
Quia
Active
16:05:5
A plant root is an example of
Answer:A plant root is an example of an organ
Explanation:The main function of the root is to collect nutrients and water from the soil.
Answer:
hi sorry i just want points YOSHIII :3
Explanation:
[TG.05H]A geothermal plant has been built in a location. Which of these is the most likely impact of the plant on the location?
depletion of fossil fuels like coal
damage to hot springs and geysers
decrease in average annual temperature
increase in emission of greenhouse gases
The environmental impact that is most likely to occur in an area where there is a geothermal plant is decrease in average annual temperature.
What is a geothermal plant?A geothermal plant makes use of both heat and water in the generation of electricity.
The environmental impact that is most likely to occur in an area where there is a geothermal plant is decrease in average annual temperature.
Learn more about geothermal plant:https://brainly.com/question/27442707
#SPJ2
can someone help? NO LINKS OR IM REPORTING
Answer:
BjsjsjsiisudujdgjkkgywuuuyyyuwuPeople with schizophrenia are most likely to have delusions that reflect the theme of
Answer:
llogical or bizarre ideas or fantasies.
Explanation:
40 points
Construct an argument based on data about the risks and benefits of renewable and
nonrenewable energy resources.
Answer:
Advantages
Renewable resources will never run out.
Non renewable resources can be recycled and be used for everyday products.
Non renewable resources are easily obtainable.
Non renewable resources are cheaper.
Explanation:
A disk has 128 tracks of 32 sectors each, on each surface of eight platters. The disk spins at 3600 RPM and takes 15 ms to move between adjacent tracks. What is the longest time needed to read an arbitrary sector located anywhere on the disk
Answer:
the longest time needed to read an arbitrary sector located anywhere on the disk is 2971.24 ms
Explanation:
Given the data in the question;
first we determine the rotational latency
Rotational latency = 60/(3600×2) = 0.008333 s = 8.33 ms
To get the longest time, lets assume the sector will be found at the last track.
hence we will access all the track, meaning that 127 transitions will be done;
so the track changing time = 127 × 15 = 1905 ms
also, we will look for the sectors, for every track rotations that will be done;
128 × 8.33 = 1066.24 ms
∴The Total Time = 1066.24 ms + 1905 ms
Total Time = 2971.24 ms
Therefore, the longest time needed to read an arbitrary sector located anywhere on the disk is 2971.24 ms
what is the process that creates wind.
Answer:
Winds are caused by differences in air pressure. Unequal heating of Earth’s surface creates areas of different pressure. Cooler areas have higher air pressure. Warmer areas have lower pressure. This causes air to move from high pressure to low pressure. This movement is the wind we feel.
plz mark me as brainliest.
The data points you have taken on your lab graphs roughly form a straight line. How do you interpret the slope of this line?
Steeper slopes mean higher speeds.
Steeper slopes mean lower speeds.
Steeper slopes mean higher error.
Steeper slopes mean lower error.
The slope has no relation to speed or error
Answer: Steeper slopes mean lower speeds.
Explanation:
Which choice is an example of an effect of agricultural techniques on the environment? increased oxygen levels in a pond due to fertilizer runoff sediment accumulation in a lake near a farm soil compaction caused by tillage increased plant growth caused by application of herbicides
Answer:
sediment accumulation in a lake near a farm.
Explanation:
In Agriculture, there are various techniques adopted by farmers for the growth and development of their crops. An effective and efficient agricultural technique would have a significant impact on the level of productivity attained by the farmers and as such meeting the unending requirements or needs of the consumers.
There are various agricultural techniques used in farming and these includes;
I. Mixed farming.
II. Arable farming.
III. Pastoral farming.
IV. Bush fallowing.
V. Shifting cultivation.
VI. Nomadic herding.
VII. Subsistence farming.
Generally, these agricultural techniques adopted by farmers has an effect or impact on the environment where it is practiced.
For example, one of such effect on the environment is the accumulation of sediments in a lake near the farm. Thus, this could lead to the formation of new materials such as silt, sand, clay, organic debris, etc., inside the lake.
Answer:
sediment accumulation in a lake near a farm.
Explanation:
A glass bottle of soda is sealed with a screw cap. The absolute pressure of the carbon dioxide inside the bottle is 1.50 x 105 Pa. Assuming that the top and bottom surfaces of the cap each have an area of 4.40 x 10-4 m2, obtain the magnitude of the force that the screw thread exerts on the cap in order to keep it on the bottle. The air pressure outside the bottle is one atmosphere
Answer:
[tex]F \approx 19.5 N[/tex]
Explanation:
From the question we are told that:
Pressure of [tex]P_{CO_2}=1.50 * 105 Pa.[/tex]
Bottle cap area [tex]A_b= 4.40 * 10-4 m^2[/tex]
Generally the equation for Resultant pressure [tex]P_r[/tex] is give as is mathematically given by
[tex]P_r=P_{CO_2}-P_a[/tex]
Where
[tex]P_a=atmospheric\ pressure = 1.013*10^5 pa[/tex]
[tex]P_r=1.50 * 105 Pa-1.013*10^5 pa[/tex]
[tex]P_r=0.487*10^5 pa[/tex]
Generally the equation for Force exerted by screw F is give as is mathematically given by
[tex]F = P*A\\F = 0.487*10^5*4.00*10^-4\\ F = 19.48 N[/tex]
[tex]F \approx 19.5 N[/tex]
Which of the following is NOT an event in track and field?
A: 110 meter hurdles
B: Dressage
C: Pole Vault
D: Discus
Answer:
B
Explanation:
Dressage is a horse racing sport.
Use the simulation to determine the relationship between the distance from the magnet and the strength of the magnetic field at that point. Use a ruler to measure distance on the screen. Use a power fit to determine the B vs. r relationship for each location. To simplify your data collection, chose a data-collection axis where either Bx or By = 0. Measure the distance from the nearest edge of the magnet. You will need to obtain a ruler for collecting data.
Explanation:
give me more detail and i well help you out
35. What would a ship's position be if that ship started at
point B and traveled at an average velocity of 35 km/h
west to point D in a time period of 1.2 h?
Answer:
The final position of the ship after the given time period is 42 km West of B.
Explanation:
Given;
average velocity of the ship, v = 35 km/h
time taken for the ship to reach point D, t = 1.2 hours
The position of the ship after the given time period is calculated as follows;
x = v x t
x = (35 km/h) x 1.2 h = 42 km
x = 42 km West of B.
Therefore, the final position of the ship after the given time period is 42 km West of B.
Light with a wavelength of 725 nm passes through the slits of a double-slit experiment. The slits of the experiment are a distance 0.0335 mm apart. What angle does the light make for the third dark fringe?
100 points
Answer:
3.10°
Explanation:
I took the test
Answer:
Explanation:
Angle for the nth dark fringe of light = n * wavelength of light / slit distance
So the angle for the 3rd fringe = 3 * 725 nm / 0.0335 mm
= 3 * 725*10^(-9) / 0.0335*10^(-3)
= 0.0649 rad
= 0.0649 * 360 / 2pi degree
= 3.72 degree
Suppose that the collector is held at a small negative voltage with respect to the grid. Will the accelerated electrons reach the collecting plate?
A) Yes, but only those electrons with energy less than the potential difference established between the grid and the collector will reach the collector.
B) Yes, but only those electrons with energy greater than the potential difference established between the grid and the collector will reach the collector.
C) Yes; all the accelerated electrons will reach the collector.
D) No, none of the electrons will reach the collector
Answer:
B) Yes, but only those electrons with energy greater than the potential difference established between the grid and the collector will reach the collector.
Explanation:
In the case when the collector would held at a negative voltage i.e. small with regard to grid So yes the accelerated electrons would be reach to the collecting plate as the kinetic energy would be more than the potential energy that because of negative potential
so according to the given situation, the option b is correct
And, the rest of the options are wrong
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?
A) Θ decrease
B) Θ increase
C) Θ remains the same
D) distant between spheres increases
Answer:
Two small metallic spheres with equal mass are suspended as pendulums by strings of length L. The sphereshave the same electric charge and come to equilibrium with each string at an angle of Θ = 10.00° with the vertical. What happens if the electric charges are decreased?(D)
Explanation:
please click the heart and rate excellent and brainleist to ❤☺️☻♨️♨️☻☺️❤
The visible spectrum of sunlight shows a range of colors from red to violet. This spectrum has numerous dark lines spread throughout it. Noting that the surface of the Sun is much cooler than the interior, so that the surface is comparable to a cool gas through which light passes, which of the following statements correctly explains the dark lines?
a. The cooler, denser surface material scatters certain wavelengths of light, forming dark lines.
b. The atoms at the surface absorb certain wavelengths of light, causing the dark lines at those wavelengths.
c. The atoms in the Sun’s interior emit light of specific wavelength, so that parts of the spectrum are dark.
d. The atoms at the surface are excited by the high interior temperatures, so that the dark lines are merely wavelengths at which those atoms don’t emit energy.
Three points A, B and C are located along a horizontal line. A positive test charge is released from rest at C and accelerates towards B. Upon reaching B, the test charge continues to accelerate toward A. Assuming that only motion along the line is possible,
a) Which point has the highest potential; A, B or C?
b) What will a negative test charge do when it is released from rest at B?
Darcy is going to make raspberry jam for the county fair.
• Her recipe calls for exactly 55 raspberries per jar.
Darcy has 1,700 raspberries.
Answer:
She can make have 30 jars with raspberries in them with 50 left over.
Explanation:
1,700 divided by 55
30 equally
but 50 left over
This means that she can make have 30 jars with raspberries in them with 50 left over.
Electric current is a measure of
Group of answer choices
a. the amount of resistance provided by the circuit.
b. the amount of electric charge that passes within a certain amount of time.
c. the amount of electric potential an electron gains passing through a battery
d. the amount of protons that pass through a resistor.
Answer:
b. the amount of electric charge that passes within a certain amount of time
Answer:
The answer is B which is the amount of electric charge that passes within a certain amount of time in my opinion.
Give a definition of the positive work.
Answer and I will give you brainiliest
Explanation:
The work that leads towards the open mindness of people without any discrimination that contribute to a moral development is positive work
What is responsible for the amount of current in a circuit?
Will mark as Brainliest!!!
Answer:
Voltage is required for there to be a current but resistance can effect the amount of current.
Answer:
the answer is voltage
Explanation:
we just finished this unit in class
A child is pushing a merry-go-round. The angle through which the merry-go-round has turned varies with time according to θ(t)=γt+βt3θ(t)=γt+βt3, where γ=γ= 0.450 rad/srad/s and β=β= 1.10×10−2 rad/s3rad/s3. Part A Calculate the angular velocity of the merry-go-round as a function of time. Express your answer in terms of the variables ββ, γγ, and tt. ωz(t)ωz(t) = nothing rad/srad/s SubmitRequest Answer Part B What is the initial value of the angular velocity? ωzωz = nothing rad/srad/s SubmitRequest Answer Part C Calculate the instantaneous value of the angular velocity ωzωz at t=t= 5.25 ss . ωzωz = nothing rad/srad/s SubmitRequest Answer Part D Calculate the average angular velocity ωav−zωav−z for the time interval t=0t=0 to t=t= 5.25 ss .
Answer:
hufiui
fihgpfghlfikgergkfkjhfkhjgkffhhh
Explanation:
jjgzgcjxhgygueyuufhfugkhkckgijljhgxjgjgffhgkgjxhxjgjcjckvjgghkhkgjgjfhfhfhffrusufsflslrsyfhldufñlñudtoqdyhjjxkgsgjfktwlyfñujxjxhlxlhdktstedoyñfuyñflldytidoyeyljjcñcjluffñui5woyepurñfuñufldyrajuñdlydstdyñudñydktshñxjcñydiw5uñfitwoyeoyeñufñfuñifjñufhlsyñeifññydoysitaiwtuñdyñdlsyltslsyoyeylsuñdñjjcyldlyslatlysñudidñjdñfjñjjxlhsmzhmzjjdjdlhdñhjdñjdñjddñhflhuñfhxltkds4urayraylraluarularuñstuñtsuñtsultsuñtsuñstñitsñktssistustlulsrustlularyralultalutslutajltsñgskjlgzljg?g o uguhxputxipyfugxiñhxiñhfuñdguldthgksjmgdjmgkhdjlgdjlgd
pduoyditsyafylrayoraourauptautospustistiptsñitsñitsñitsiptsiteitdustuñtsuñtsñitwiñstñitwñitsñstuuñrsoursurosoustjlsrlutejlgsjlstjfsjlgsultsjgzjñgsññkdylfhkñdgjlfshkadmjgsuñstñkydñkydñiykdhiñstñitsuñtsisñtñtieñietñietñiteñiwtñitskñgsiñteuñwrkñsturaluglsuñtwjlfalfjalhadoyfutdllgdñitswtkgsñktjrajtsurwñwñutiñtsiwñtuwñturqlñitwualtayoryarluarlietite
Two children are sitting on a see-saw, as shown. Calculate the distance the 500-N chid should sit from the fulcrum (pivot) to balance the sew-saw.
We have that for the Question "Calculate the distance the 500-N chid should sit from the fulcrum (pivot) to balance the sew-saw"
It can be said that
The distance = [tex]1.8m[/tex]From the question we are told
weights are = 300 N and 500 N
length l = 6 m
take x distance from the 300 N
total torque is zero
[tex]300*3 = 500x\\\\x = 1.8 m[/tex]
For more information on this visit
https://brainly.com/question/23379286
A ball weighing 100 g is attached to a string and swung around with a speed of 2 m/s. If the centripetal force exerted by the string is
0.5 N, what is the length of the string?
A) 0.08 m
B) 0.8 cm
C) 8 m
D) 80 cm
Assuming the ball is swung around in a circle parallel to the ground, it has a centripetal acceleration a of
a = v ² / R
where v is the tangential speed of the ball and R is the length of the string.
The tension in the string is 0.5 N, so by Newton's second law, the ball has acceleration
F = m a → a = F / m = (0.5 N) / (0.1 kg) = 5 m/s²
where m is the ball's mass.
Solve for R :
a = v ² / R → R = v ² / a = (2 m/s)² / (5 m/s²) = 0.8 m = 80 cm
A 1 kg block of wood is attached to a spring, of force constant 200 N/m, which is attached to an immovable support. The block rests on a frictional surface with a coefficient of kinetic friction of 0.2. A 20 g bullet is fired into the block horizontally compressing the spring a maximum distance of 15 cm. Find the original velocity of the bullet before the collision.
Answer:
[tex]v=15.9499m/s[/tex]
Explanation:
From the question we are told that:
Mass of wood [tex]m=1kg[/tex]
force constants [tex]k= 200N-m[/tex]
Coefficient of kinetic friction [tex]\mu= 0.2[/tex]
Bullet mass [tex]m_b= 20 \approx 0.02kg[/tex]
Spring compresion [tex]y=15cm \approx 0.15 m[/tex]
Generally the equation for kinetic energy of bullet [tex]K>E_b[/tex] is mathematically given by
Complete Question
[tex]K.E_b=spring potential energy+work done against friction[/tex]
[tex]K.E_b=\frac{1}{2} mbv^2[/tex]
[tex]\frac{1}{2} m_b v^2=\frac{1}{2} ky^2+\mu my[/tex]
[tex]\frac{1}{2} (0.02)v^2=\frac{1}{2} (0.2)(0.15)^2+0.2(1)(0.15)[/tex]
[tex]v=15.9499m/s[/tex]
[tex]v\approx16m/s[/tex]