pls pls help. just need the answer

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

vehicle?

The average delay per vehicle would be 20 minutes. This is calculated by taking the total time the freeway was shut down (40 minutes) and dividing it by the total number of vehicles that would have been on the freeway during that time (2400 vehicles).

The probability that a rainfall event exceeds the mean by more than 2 standard deviations is approximately 0.0498.

a. The exponential distribution with a mean of 2.725 hours can be expressed as λ = 1/2.725. Using this parameter, we can calculate the probabilities as follows:

P(X ≥ 2) = [tex]e^{(-λ2) }= e^{(-1/2.7252)[/tex] ≈ 0.4800

P(X ≤ 3) = 1 - [tex]e^{(-λ3)} = 1 - e^{(-1/2.7253)[/tex] ≈ 0.6674

P(2 ≤ X ≤ 3) = [tex]e^{(-λ2)} - e^{(-λ3)} = e^{(-1/2.7252)} - e^{(-1/2.7253)}[/tex] ≈ 0.1474

b. The standard deviation of an exponential distribution is equal to the mean, so 2 standard deviations above the mean would be 2*2.725 = 5.45 hours. The probability that a rainfall event exceeds this duration can be calculated as follows:

P(X > 5.45) =[tex]e^{(-λ5.45)} = e^{(-1/2.7255.45)}[/tex] ≈ 0.0498

Therefore, the probability that a rainfall event exceeds the mean by more than 2 standard deviations is approximately 0.0498.

Learn more about probability

https://brainly.com/question/24756209

#SPJ4

Complete Question:

Suppose that rainfall duration follows an exponential distribution with mean value 2.725 hours.

a. What is the probability that the duration of a particular rainfall event is at least 2 hours? At most 3 hours? Between 2 and 3 hours? (.4800, .6674, .1474)

b. What is the probability that rainfall duration exceeds the mean value by more than 2 standard deviations? (.0498)

This means that we can be 95% confident that the true population means examination score falls within this range based on the sample data.

The confidence interval estimate of the population means examination score can be calculated using the sample mean and the margin of error. The margin of error depends on the level of confidence and the sample size.

For example, if a sample of 100 applications provided a sample mean score of 80, and a 95% confidence level is used, the confidence interval estimate of the population mean examination score would be:

Margin of error = (critical value) x (standard error)

The critical value for a 95% confidence level with 99 degrees of freedom is 1.984. The standard error can be calculated using the formula:

Standard error = (standard deviation) / sqrt(sample size)

If the standard deviation of the examination scores is known, it can be used in the formula. If not, the sample standard deviation can be used as an estimate.

Assuming a sample standard deviation of 10, the standard error would be:

[tex]Standard\  error = \frac{10} { \sqrt{(100)}} = 1[/tex]

Therefore, the margin of error would be:

Margin of error = 1.984 x 1 = 1.984

The confidence interval estimate of the population means examination score would be:

80 ± 1.984, or between 78.016 and 81.984.

This means that we can be 95% confident that the true population means examination score falls within this range based on the sample data.

learn more about confidence intervals,

https://brainly.com/question/24131141

#SPJ11

The 95% confidence interval for the population mean examination score would be between 72.23 and 77.77, to the

nearest whole number.

To determine the confidence interval estimate of the population mean examination score based on a sample mean

provided to the nearest whole number, we need to know the sample size and the level of confidence.

Assuming a normal distribution and a level of confidence of 95%, we can use the following formula to calculate the

confidence interval estimate:

Confidence interval = sample mean +/- (critical value) x (standard error)

The critical value can be found using a t-distribution table or a calculator, based on the sample size and degrees of

freedom (n-1). For a sample size of 30 or more, we can use the z-score instead of the t-score.

The standard error is the standard deviation of the sample divided by the square root of the sample size.

For example, if a sample of 50 applications provided a sample mean of 75, and the standard deviation was 10, the

standard error would be 10/sqrt(50) = 1.41.

Assuming a level of confidence of 95%, the critical value for a sample size of 50 and degrees of freedom of 49 would be 1.96.

Therefore, the confidence interval estimate would be:

75 +/- 1.96 x 1.41 = 75 +/- 2.77

for such more question on confidence interval

https://brainly.com/question/20309162

#SPJ11

Answer:see below

Step-by-step explanation:

10.600

11.80000

12.17

13.48

14.4000

21. 1km=100m;0.5km=500m;0.1km=100m

22.50m=5000cm; 5m=500cm; 0.5m=50cm

The H. C. F of 80,215,245 and 720 using long division method is 5.

The long division method to find the Highest Common Factor (H.C.F.) of 80, 215, 245, and 720.

Divide the largest number by the smallest number.

720 ÷ 80 = 9 with a remainder of 0

Divide the smallest number by the remainder from the previous step.

80 ÷ 40 = 2 with a remainder of 0

Divide the remainder from the previous step by the next smallest number.

40 ÷ 5 = 8 with a remainder of 0

Divide the remainder from the previous step by the next smallest number.

5 ÷ 5 = 1 with a remainder of 0

We have reached a remainder of 0, which means that 5 is the H.C.F. of the given numbers.

Therefore, the H.C.F. of 80, 215, 245, and 720 is 5.

We can also verify this by listing the factors of each number and finding the common factors:

80: 1, 2, 4, 5, 8, 10, 16, 20, 40, 80

215: 1, 5, 43, 215

245: 1, 5, 7, 35, 49, 245

720: 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 18, 20, 24, 30, 36, 40, 45, 48, 60, 72, 80, 90, 120, 144, 180, 240, 360, 720

The common factors are 1, 5, and 40.

The largest common factor is 5, which is the same as what we obtained using the long division method.

For similar question on H.C.F. :

https://brainly.com/question/21504246

#SPJ11

Answer:

Step-by-step explanation:

5989.87

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

The length of the given line AB is 6 units and the polygon ABCDEF has been created.

A graph is a mathematical structure made up of a collection of points called VERTICES and a set of lines connecting some pair of VERTICES that may or may not be empty.

There is a chance that the edges will be directed, or orientated.

If the lines are directed or undirected, respectively, they are referred to as ARCS or EDGES.

Make a sequence of bars on graph paper as an example of a graph.

So, in the given situation the polygon ABCDEF has been created:

(Refer to the graph attached below)

Now, the length of the side AB:

Count the units as follows which comes to 6 units.

Therefore, the length of the given line AB is 6 units and the polygon ABCDEF has been created.

Know more about the graph here:

https://brainly.com/question/19040584

#SPJ1

Correct question:

Help Here is your graph of the points on the previous screen.

Connect the points in order to create polygon `ABCDEF`.

1.2 Enter the length of the segment between A and B.

The value of both domain and range of this exponential function is (−∞,∞).

y = 2x-9

The domain of the function can be defined as all real numbers except the ones where the expression is undefined. In the case of 2x-9, there is no real number for which this expression is undefined. Therefore, a domain of this exponential function is (−∞,∞).

The range of the function is defined as the set of all valid y values. In this case, all real numbers are valid values of y. Therefore, the range of this exponential function is (−∞,∞).

Therefore, domain of y = 2x-9 is (−∞,∞) and range is also (−∞,∞).

To learn more about domain and range;

https://brainly.com/question/1045262

Answer:150°

Step-by-step explanation:

Answer:

x=2

Step-by-step explanation:

x^4=16

x=[tex]\sqrt[4]{16}[/tex]

x=[tex]2[/tex]

Answer:

B

Step-by-step explanation:

The value of 0.6 is greater than the value of 0.39 because 0.6 represents a larger proportion or fraction of a whole than 0.39 does.

To compare these two values, we can think of them as parts of a whole. For example, we can consider 0.6 as 60% of a whole and 0.39 as 39% of the same whole. When we compare 60% and 39%, it is clear that 60% is greater than 39%.

Another way to compare these two values is to convert them to fractions. 0.6 can be written as 6/10 or 3/5, while 0.39 can be written as 39/100.

When we compare 6/10 and 39/100, we can see that 6/10 is greater than 39/100 because 6/10 represents 6 parts out of 10, while 39/100 represents 39 parts out of 100.

Therefore, we can conclude that the value of 0.6 is greater than the value of 0.39 because it represents a larger proportion or fraction of a whole.

The answer to the trigonometry question in the picture attached is:

   = cos θ / [sin θ * (1 - sin θ)] * (1 + sin θ)

Simplify 1-csc θ as follows:

1 - csc θ = (1 - csc θ)(1 + csc θ) / (1 + csc θ)

= 1 - csc^2 θ / (1 + csc θ)

= 1 - 1/sin^2 θ / (1 + 1/sin θ)

= 1 - sin^2 θ / (sin θ + 1)

= (sin θ - sin^2 θ) / (sin θ + 1)

Simplify 1+csc θ as follows:

1 + csc θ = (1 + csc θ)(1 - csc θ) / (1 - csc θ)

= 1 - csc^2 θ / (1 - csc θ)

= 1 - 1/sin^2 θ / (1 - 1/sin θ)

= 1 - sin^2 θ / (sin θ - 1)

= (sin θ + sin^2 θ) / (sin θ - 1)

Substitute the above simplifications in the expression cos θ/(1-csc θ) * 1+csc θ/(1+ csc θ) to get:

cos θ / (sin θ - sin^2 θ) * (sin θ + sin^2 θ) / (sin θ + 1)

Simplify the expression by canceling out the sin^2 θ terms:

cos θ / (sin θ - sin^2 θ) * (sin θ + sin^2 θ) / (sin θ + 1)

= cos θ / (sin θ - sin^2 θ) * (1 + sin θ) / (sin θ + 1)

Simplify further by factoring out common terms in the numerator and denominator:

cos θ / (sin θ - sin^2 θ) * (1 + sin θ) / (sin θ + 1)

= cos θ * (1 + sin θ) / [(sin θ - sin^2 θ) * (sin θ + 1)]

Finally, simplify the expression by factoring out a sin θ term from the denominator:

cos θ * (1 + sin θ) / [(sin θ - sin^2 θ) * (sin θ + 1)]

= cos θ * (1 + sin θ) / [sin θ * (1 - sin θ) * (sin θ + 1)]

= cos θ / [sin θ * (1 - sin θ)] * (1 + sin θ)

Learn more about Trigonometry here:

https://brainly.com/question/25618616

#SPJ1

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

Answer: Sarah bought 5 first class tickets and (13-5) = 8 coach tickets.

Step-by-step explanation: The taken a toll of one to begin with lesson ticket is $1200 and the fetched of one coach ticket is $380.

So, the full taken a toll of first class tickets would be 1200x and the entire cost of coach tickets would be 380(13-x) = 4940 - 380x.

The overall fetched of the tickets is given as $9040, so we will set up the taking after condition:

1200x + 4940 - 380x = 9040

Streamlining and tackling for x, we get:

820x = 4100

x = 5

Every day, the number of views of the video increases by 80% of the previous day's views.

Every day, the number of views of the video increases by a certain percentage. To find the daily percent change in the views, we can use the formula for percent change, which is given by:

percent change = ((new value - old value) / old value) * 100

In this case, the old value is the number of views at the start, which is 500, and the new value is the number of views after one day, which is given by:

V(1) = 500*(1.8)^1 = 900

Substituting these values into the formula, we get:

percent change = ((900 - 500) / 500) * 100 = 80%

In other words, for every day that passes, the number of views of the video is multiplied by a factor of 1.8.

To learn more about percent click on,

https://brainly.com/question/27452160

#SPJ4

Answer:

C and D

Step-by-step explanation:

cosA = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{AB}{AC}[/tex] = [tex]\frac{4}{5}[/tex] ⇒ C

sinA = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{BC}{AC}[/tex] = [tex]\frac{3}{5}[/tex] ⇒ D

[tex]7^{(1/3)}[/tex] is the equivalent expression to ∛7 with rational exponents.

What are rational exponents?

Rational exponents are exponents that are expressed as fractions. Specifically, a rational exponent of the form m/n is equivalent to taking the nth root of a number and then raising it to the power of m.

When we talk about rational exponents, we are referring to exponents that are written as fractions. Specifically, a rational exponent of the form m/n is equivalent to taking the nth root of a number and then raising it to the power of m.

So, in the case of ∛7, we can rewrite the cube root symbol (∛) as a rational exponent with a denominator of 3. That is, ∛7 can be expressed as [tex]7^{(1/3)}[/tex] , where the 1/3 exponent means "take the cube root of 7".

Therefore, [tex]7^{(1/3)}[/tex] is the equivalent expression to ∛7 with rational exponents.

To learn more about rationlal exponents from the given link:

https://brainly.com/question/3009444

#SPJ1

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

There are 16 possible move sequences for the frog.

The possible moves that the frog can make.

The frog can move to either the closest point with a greater integer coordinate that is a multiple of 3, or to the closest point with a greater integer coordinate that is a multiple of 13.
Let's consider the first type of move, where the frog moves to the closest point with a greater integer coordinate that is a multiple of 3.

If the frog is at the point [tex]$n$[/tex], then the closest point with a greater integer coordinate that is a multiple of 3 is either [tex]$n+3$ or $n+6$[/tex].

Similarly, if the frog is at the point [tex]$n$[/tex] and wants to move to a multiple of 13, then the closest point with a greater integer coordinate that is a multiple of 13 is either[tex]$n+13$[/tex] or [tex]$n+26$[/tex].
Constructing move sequences.

The sequence starts with 0 and ends with 39.

The frog has two choices for its first move: either move to 3 or move to 13.

Let's assume that the frog moves to 3.

From there, the frog has two choices again:

move to 6 or move to 13. If the frog moves to 6, then it has two choices again: move to 9 or move to 13.

If it moves to 13, then it has two choices: move to 26 or move to 16.

We can continue this process until we reach 39.
We can create a tree diagram to help us keep track of the possible move sequences:
                            0
                             |
                        3 or 13
                      /            \
                6 or 13       13 or 26
                  /       \       /        \
             9        13     16         26
            / \        / \    / \           / \
          ... ...     ... ... ... ...         ... ...
Each branch represents a different move sequence.

We can see that there are 16 possible move sequences in total.

We can also see that some sequences are longer than others.

The longest sequence has 7 moves, while the shortest sequence has only 2 moves.

For similar questions on sequences

https://brainly.com/question/7882626

#SPJ11

Using the fact that the triangles are similar we can see that the value of x is  36

We can see that the triangles are similar due to the same interior angles, then ther is a scale factor k between them.

So we can write:

20*k = 48

k = 48/20 = 2.4

Then:

x = 15*2.4

x = 36

That is the value of x.

Learn more about similar triangles at:

https://brainly.com/question/14285697

#SPJ1

Donna Mosier should use an Individuals control chart to set control limits for the data entry process.

An Individuals control chart is a type of process control chart used to monitor the process when the sample size is one. In this case, Mosier is examining 100 records entered by each of the 20 clerks, making the sample size one.

To set control limits that include 99.73% of the random variation in the data entry process, Mosier can use the following steps:

By using an Individuals control chart, Mosier can set control limits to monitor the data entry process and detect any issues before they become major problems.

Learn more about control chart

https://brainly.com/question/26478724

#SPJ4

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

The only exponential growth equation is the third one:

y = 2*(4)^x

A general exponential equation is:

y = A*(b)^x

if 0 < b < 1, then it is a decay.

if 1 < b, then it is a growth.

So any equation where the base, b, is larger than 1, represents a growth.

Then the correct option is the third one:

y = 2*(4)^x

All the other options are decays.

Learn more about exponential equations at:

https://brainly.com/question/11832081

#SPJ1

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D