Question 3 Part A (4 points): Use the draw it tools to complete the question below. Be sure to show all work that supports your answer to receive full credit. IS THE BLUE CORRECT?

The area of the composite shape in this problem is given as follows:

18 inches squared.

To obtain the area of a rectangle, you need to multiply its length by its width. The formula for the area of a rectangle is:

Area = Length x Width.

The figure in this problem are composed by two rectangles, with dimensions given as follows:

Hence the area of the shape is given as follows:

A = 2 x 3 + 2 x 6

A = 6 + 12

A = 18 square inches.

More can be learned about the area of a rectangle at brainly.com/question/25292087

#SPJ1

Answer: 34

I really hope that this helps

To find the numbers "a" and "c" such that Norman scored lower than approximately "percent" of people who took the test, we need to use the standard normal distribution.

First, we calculate the z-score for Norman's score using the formula:

z = (x - mean) / standard deviation

In this case, x = 72, mean = 50, and standard deviation = 20.

z = (72 - 50) / 20 = 1.1

Next, we find the percentile corresponding to the z-score of 1.1 using a standard normal distribution table or a calculator. Let's assume it is "percent".

To find "c", we need to calculate the complement of "percent" and convert it to a decimal:

complement = 1 - (percent / 100)

Finally, to find "a", we use the formula:

a = mean + (c * standard deviation)

a = 50 + (complement * 20)

100c a can be obtained by multiplying "a" by 100.

Therefore, 100c a = 100 * a.

Please provide the value of "percent" to calculate the exact values for "c" and "100c a".

To learn more about Z-score - brainly.com/question/31871890

#SPJ11

Therefore, the DFT of x∗[n] is obtained by taking the complex conjugate of each element in the DFT spectrum of x[n].

The DFT (Discrete Fourier Transform) of the conjugate sequence x∗[n] is the complex conjugate of the DFT of the original sequence x[n]. In other words, if x[k] is the N-point DFT of the sequence x[n], then the DFT of x∗[n] is given by x∗[k], where the asterisk (*) denotes complex conjugation.

Mathematically, if X[k] is the N-point DFT of x[n], then the DFT of x∗[n] is given by:

x∗[k] = conj(X[k])

Here, conj(.) represents the complex conjugate operation.

To know more about DFT spectrum,

https://brainly.com/question/31473582

#SPJ11

H: σ> 110 is a legitimate statistical hypothesis because it is an assertion about the value of a parameter, which is the population standard deviation (σ). Option A is correct.

In statistical hypothesis testing, hypotheses are statements made about the values of parameters, which are characteristics of the population being studied. The given statement H: σ > 110 is a valid statistical hypothesis because it asserts that the population standard deviation (σ) is greater than 110.

It addresses a parameter and not a statistic. Hypotheses about parameters are common in statistical analysis as they allow us to make inferences and draw conclusions about the population based on sample data. Thus, the statement H: σ > 110 is a legitimate statistical hypothesis.

Therefore, option A is correct.

Learn more about statistical hypothesis https://brainly.com/question/29576929

#SPJ11

The coterminal angle of 5π/3

Coterminal angles are angles in standard position (angles with the initial side on the positive x-axis) that have a common terminal side.

Examples of coterminal angles are 30°, -330, 390°. We can get the coterminal angles of a given angle by adding or subtracting 360 from the given angle.

5π/3

π is a symbol in radian that is equivalent to 180° in degrees.

therefore;

5 × 180/3

= 5× 60

= 300°

The coterminal angle of 300°

= 300+360

= 660°

converting it back to radian

= 660/180 = 66/18π

= 33/9 = 11/3π

Therefore the coterminal angle of 5π/3 is 11π/3

learn more about coterminal angles from

https://brainly.com/question/23093580

#SPJ1

Answer:

B) 2x12=24 2x7=14

This equals to 24+14

Answer: I'm in 2nd grade

Step-by-step explanation: Fortnight is a acrobatic FIRST PERSON SHOOTER GAME

The explicit compound interest expression which represents the total value after 19 years is

[tex]560 {(1.0373)}^{19} [/tex]

Compound interest is obtained mathematically using the relation

[tex]A = {P(1 + r \div n)}^{nt} [/tex]

Here ;

A = total value of the investment after the specified period

P = principal amount

r = interest rate

n = number of compounding periods per year, and

t = number of years.

We are given the following parameters;

P = $560 (principal amount)

r = 3.73% = 0.0373

n = 1

t = 19

Plugging the values into the formula , we have

[tex]A = {560(1 + 0.0373)}^{19} [/tex]

Hence, the correct compounding interest expression is

[tex]{560(1 + 0.0373)}^{19} [/tex]

Learn more on compound interest; https://brainly.com/question/24274034

#SPJ1

Check the picture below.

so the way I see it, we have a bunch of semicircies going from 0 to 5, and we're looking at the bottom of the object, the provided picture above is not very useful btw.

so we're looking at the bottom of the object and the semicircles are going from 0 to 5, however from 0 to 1 they vary, from small to large, then they reach a diameter of 6 and go steady with that 6 all the way to 5.

so we can say that from 1 to 5, we can simply get the integral of a semicircle with a steady radius of 3, in which case that'd be the fixed value of 4.5π for the area.

now, we can also say that from 0 to 1 it varies, now, the radius varies, the radius is really the vertical value of the line or namely the y-value of that slanted line from 0 to 1, anyhow, not to bore you to death, but if we use the points (0 , 0) and (1 , 3) to get the equation of the line, we end up with y = 3x, and that's our radius, and we'll get the integral of those semicircles from 0 to 1 with a radius of 3x, with an area of 4.5πx²

[tex]\stackrel{ \textit{areas from 0 to 1} }{\cfrac{1}{2}\cdot \pi (3x)^2\implies 4.5\pi x^2}\hspace{9em}\stackrel{ \textit{areas from 1 to 5} }{\cfrac{1}{2}\cdot \pi (3)^2\implies 4.5\pi} \\\\[-0.35em] ~\dotfill\\\\ \displaystyle \int_0^{1}4.5\pi x^2dx~~ + ~~\int_{1}^{5}4.5\pi dx\implies 4.5\pi\int_0^{1} x^2dx~~ + ~~\int_{1}^{5}4.5\pi dx \\\\\\ 4.5\pi \left. \cfrac{x^3}{3} \right]_{0}^{1}~~ + ~~4.5\pi \left. x\cfrac{}{} \right]_{0}^{1}\implies 4.5\pi ~~ + ~~18\pi \implies \boxed{22.5\pi}[/tex]

The product is 476(cos 540° + i sin 540°).

To find the product and write it in rectangular form, let's simplify the expression step by step.

First, let's simplify the expressions within each set of brackets separately:

Step 1: [4(cos 60° + i sin 60°)I7(cos 210° + i sin 210°)]

This expression involves multiplying two complex numbers using the polar form. When multiplying complex numbers, we multiply their magnitudes and add their angles.

The magnitude of 4 is 4, and the magnitude of I7 is 7. The angle of cos 60° + i sin 60° is 60°, and the angle of cos 210° + i sin 210° is 210°.

Therefore, the product of the first set of brackets is:

4 * 7 * (cos (60° + 210°) + i sin (60° + 210°))

= 28 * (cos 270° + i sin 270°)

= 28 * (-i)

= -28i

Step 2: [4(cos 60° + i sin 60°)17(cos 210° + i sin 210°)]

Similarly, we multiply the magnitudes and add the angles:

4 * 17 * (cos (60° + 210°) + i sin (60° + 210°))

= 68 * (cos 270° + i sin 270°)

= 68 * (-i)

= -68i

Now, we multiply the two results from the above steps:

(-28i) * (-68i)

= (-28 * -68) * (i * i)

= 1904 * (-1)

= -1904

So, the product of the given expression is -1904.

In rectangular form, a complex number is represented as a + bi, where a is the real part and b is the imaginary part.

Hence, the product in rectangular form is -1904 + 0i, or simply -1904.

Learn more about expression

brainly.com/question/14083225

#SPJ11

The expression that gives the simplified expression for the value of f'(1) is option D) lim0 (3h + 7), which evaluates to 9. The function f(x) can be written as f(x) = 3x^3.

To find f'(x), we need to take the derivative of f(x) with respect to x. Using the power rule of differentiation, we get:

f'(x) = 9x^2

To find the value of f'(1), we substitute x = 1 in the expression for f'(x):

f'(1) = 9(1)^2 = 9

Now, we need to find the expression that gives the simplified expression for the limit of the difference quotient, which is the definition of the derivative. The difference quotient is given by:

[f(x + h) - f(x)] / h

Substituting f(x) = 3x^3, we get:

[f(x + h) - f(x)] / h = [3(x + h)^3 - 3x^3] / h

Expanding the cube, we get:

[f(x + h) - f(x)] / h = [3(x^3 + 3x^2h + 3xh^2 + h^3) - 3x^3] / h

Canceling out the terms and simplifying, we get:

[f(x + h) - f(x)] / h = 9x^2 + 9xh + 3h^2

Now, we need to find the expression that gives the simplified expression for the limit of the difference quotient as h approaches 0. We can simplify the expression above as follows:

[f(x + h) - f(x)] / h = 9x^2 + 9xh + 3h^2
= 9x^2 + (9xh + 3h^2)
= 9x^2 + 3h(3x + h)

As h approaches 0, the second term in the expression above approaches 0. Therefore, the simplified expression for the limit of the difference quotient is:

lim(h → 0) [f(x + h) - f(x)] / h = 9x^2

Substituting x = 1, we get:

lim(h → 0) [f(1 + h) - f(1)] / h = 9(1)^2 = 9

Learn more about difference quotient here:

brainly.com/question/18270597

#SPJ11

According to the intersecting Secant Theorem, the measure of Angle DBC, in this case, is 96°. (Option A)

An angle is a figure in Euclidean geometry created by two rays, called the sides of the angle, that share a common termination, called the vertex of the angle.

The image below shows what occurs when tangents and secants intersect on a circle. You get inscribed angles and arcs.

Therefore, the measure of inscribed angle ABD is equal to one-half of the measure its intercepted arc BED. Likewise, the measure of inscribed angle BCD is equal to one-half its intercepted arc BC.

Since BED ≅  BD

Thus, BCD = 192/2 = 96° (Option A)

Learn more about angles:
https://brainly.com/question/28451077
#SPJ1

The sample of 25 people interviewed by the sportswriter is not a Random sample. The correct answer is Option C. No, because not all residents of Columbus, Ohio have an equal chance of being selected.  

In statistics, sampling is the process of selecting a subset of individuals or units from a larger population to estimate or infer information about the population.

A random sample is a subset of individuals or units from a larger population that is selected in a way that every member of the population has an equal chance of being selected. In other words, a random sample is unbiased and represents the population as a whole.

In the given scenario, the sportswriter interviews the first 25 people who enter the stadium before a game in Columbus, Ohio to determine how strongly Columbus residents support building a new stadium for the local minor league baseball team.

Now, the question is whether this sample is a random sample or not.

The answer is "No, because not all residents of Columbus, Ohio have an equal chance of being selected," which is option C.

The reason is that the sportswriter only interviews the first 25 people who enter the stadium before the game. This means that the sample is not selected randomly from the entire population of Columbus residents, but only from the people who happened to be at the stadium at that particular time.

Moreover, people who attend minor league baseball games may not be representative of the entire population of Columbus residents. For example, people who attend baseball games may be more likely to support building a new stadium than those who do not attend such games.

Therefore, the sample of 25 people interviewed by the sportswriter is not a random sample and may not be representative of the entire population of Columbus, Ohio. The results of the survey based on this sample may not accurately reflect the opinions of all Columbus residents.

To know more about Random Sample here

https://brainly.com/question/12719654

#SPJ4

Complete Question

A sportswriter wants to know how strongly Columbus, Ohio residents support building a new stadium for the local minor league baseball team. She stands outside the stadium before a game and interviews the first 25 people who enter the stadium. Is this a random sample?

A. Yes, because it gives very accurate results.

B. Yes, because all fans had a chance to be asked.

C. No, because not all residents of Columbus, Ohio have an equal chance of being selected.

D. No, because the sample size is not right.

If we find that the null hypothesis, H_0 : B_j = 0, cannot be rejected when testing the contribution of an individual regressor variable to the model, we usually should 1. remove the variable from the model.

This is because if the variable is not contributing significantly to the model, it is not useful in predicting the outcome. Therefore, removing the variable will simplify the model and potentially improve its accuracy.
Options 2 and 3 (doing nothing or adding a quadratic term in x) would not be appropriate if the variable is not significant, as they would not address the issue of the variable's lack of contribution.
Option 4 is also incorrect because we do need to take action if a variable is not contributing significantly to the model.

Learn more about null hypothesis here:-brainly.com/question/28920252
#SPJ11

Answer:

C

Step-by-step explanation:

the range is from the bottom line to top

the IQR is the length of the box in the middle

C. The range is 37 and the IQR is 20.

The range is the difference between the highest and lowest values in the data set. In this case, the highest value is 50 and the lowest value is 13, so the range is 50 - 13 = 37.

The interquartile range (IQR) is the difference between the first and third quartiles. In this case, the first quartile is 24 and the third quartile is 44, so the IQR is 44 - 24 = 20.

Therefore, the range is 37 and the IQR is 20 which is option c.

The other options are incorrect. Option A is incorrect because the IQR is 21, not 20. Option B is incorrect because the range is 37, not 38. Option D is incorrect because the range is 37 and the IQR is 20, not 21.

To learn more about IQR here:

https://brainly.com/question/31207390

#SPJ2

The triangle AEB is similar to triangle DEC based on congruent angles or equal angles principle.

The proof of similarity of the triangles is determined by applying angle - angle (AA) theorem as shown below.

triangle AEB will be similar to triangle DEC if the following conditions are met;

From the given diagram, the line XY bisects angle E, and it is also perpendicular to line AB and line CD.

Let angle AED = θ

then angle YEC = ¹/₂θ and angle YED = ¹/₂θ

Considering triangle AEB, we will have;

angle XEB = ¹/₂θ and angle XEA = ¹/₂θ

So the values of angle YCE  and angle XBE will be equal, hence triangle AEB will be similar to triangle DEC, proved.

Learn more about proof of angles here: https://brainly.com/question/29247347

#SPJ1

The correct option is option 5: monetary policy affects interest rates but no change in investment spending results when the LM-curve is vertical.

The LM curve represents the relationship between the interest rate and the level of income or output in an economy, assuming a fixed money supply. When the LM curve is vertical, it means that the central bank has fixed the money supply and is targeting a specific interest rate. In this case, changes in income or output do not affect the interest rate.

Option 1 is incorrect because the monetary policy multiplier can still be nonzero even when the LM curve is vertical. The multiplier refers to the effect of changes in monetary policy on income or output, and it depends on other factors such as the slope of the aggregate demand curve.

Option 2 is incorrect because when the LM curve is vertical, fiscal policy does not have a maximum effect on income. Fiscal policy refers to the use of government spending and taxation to influence the level of economic activity. In this case, changes in fiscal policy would not have a significant impact on income because the interest rate is fixed.

Option 3 is incorrect because when the LM curve is vertical, monetary policy has no effect on income. Fiscal policy would also have limited effectiveness since changes in government spending or taxation would not have a significant impact on interest rates.

Option 4 is incorrect because fiscal policy's impact on interest rates can still affect investment even when the LM curve is vertical. When fiscal policy influences interest rates, it can affect the cost of borrowing and, consequently, investment decisions.

To know more about LM-curve,

https://brainly.com/question/22683083

#SPJ11

Based on the 30% smoking rate, we can expect that approximately 75 adults out of the group of 250 will be smokers.

To determine the expected number of adults who smoke in a group of 250 adults, we need to consider the smoking rate of 30% in the country. The expected number can be calculated by multiplying the total number of adults by the smoking rate.

Expected number of adults who smoke = Total number of adults × Smoking rate

Given that there are 250 adults in the group, the expected number of adults who smoke can be calculated as follows:

Expected number of adults who smoke = 250 × 0.30 = 75

The expected number is derived by assuming that each adult's decision to smoke is independent of others in the group. While this calculation provides an estimate, it is important to note that individual smoking behavior can vary.

It's also worth considering that the expected number does not account for factors such as age, gender, or other demographic characteristics that could influence smoking rates.

Learn more about demographic here:

https://brainly.com/question/13146758

#SPJ1

The resulting displacement of the cyclist is approximately [tex]19.2[/tex] miles. (option C)

To find the resulting displacement of the cyclist, we can use the Pythagorean theorem since the cyclist traveled north and east, forming a right triangle.

The distance traveled north is 15 miles, and the distance traveled east is 12 miles. Let's call the northward distance "a" and the eastward distance "b."

Using the Pythagorean theorem, the resulting displacement "c" is given by:

[tex]\(c = \sqrt{a^2 + b^2}\)[/tex]

Plugging in the values, we have:

[tex]\(c = \sqrt{15^2 + 12^2}\)\\\c = \sqrt{225 + 144}\)\\\c = \sqrt{369}\)\(c \approx 19.2\) miles[/tex]

Therefore, the resulting displacement of the cyclist is approximately 19.2 miles.

So, the correct answer is option C: 19.2 miles.

For more such questions on displacement: https://brainly.com/question/2109763

#SPJ11

The area of the circle in terms of pi, with a diameter of 9.6 meters, is 23.04π square meters.

The diameter of a circle is twice the radius, so if the diameter is 9.6 meters, then the radius is half of that, or:

r = 9.6 / 2 = 4.8 meters

The area of a circle is given by the formula:

A = πr²

Substituting in the value of r, we get:

A = π(4.8)²

Simplifying the expression by squaring 4.8, we get:

A = π(23.04)

So the area of the circle is:

A = 23.04π square meters

Therefore, the area of the circle in terms of pi, with a diameter of 9.6 meters, is 23.04π square meters.

Learn more about the area of the circle here:

brainly.com/question/19794723

#SPJ1

The local maximums of f(x,y) = sin(x)sin(y) occur at (nπ, mπ) and the local minimums occur at (nπ + π/2, mπ + π/2), where n and m are integers.

The given function f(x,y) = sin(x)sin(y) is a product of two periodic functions, each with a period of 2π. Hence, the function f(x,y) also has a periodicity of 2π in both x and y directions. To find the local maximums and minimums of the function, we need to look for points where the partial derivatives with respect to x and y are equal to zero.

Taking the partial derivative of f(x,y) with respect to x, we get cos(x)sin(y), which is equal to zero at points (nπ, mπ), where n and m are integers. Similarly, taking the partial derivative of f(x,y) with respect to y, we get cos(y)sin(x), which is also equal to zero at points (nπ, mπ). Therefore, the local maximums of f(x,y) occur at these points.

On the other hand, taking the partial derivative of f(x,y) with respect to x, we get cos(x)sin(y), which is equal to π/2 at points (nπ + π/2, mπ), where n and m are integers. Similarly, taking the partial derivative of f(x,y) with respect to y, we get cos(y)sin(x), which is equal to π/2 at points (nπ, mπ + π/2). Therefore, the local minimums of f(x,y) occur at these points.

In summary, the local maximums of f(x,y) = sin(x)sin(y) occur at (nπ, mπ) and the local minimums occur at (nπ + π/2, mπ + π/2), where n and m are integers.

Learn more about Partial derivatives

brainly.com/question/31397807

#SPJ11

There is no curve that describes the level curve of value c for the given surface, as the condition c < 0 makes it impossible to find a real solution.

In two- or three-dimensional space, a curve is a mathematical object that symbolises a continuous, smooth path. Curves can be derived from geometric operations, parametric equations, or mathematical equations. They are commonly used to simulate real-world processes in physics, engineering, mathematics, and many other disciplines.

To find the level curve of value c for the given surface [tex]z = f(x, y) = (x^2/4) + (y^2/25) = c[/tex], where c < 0, follow these steps:

Step 1: Write down the equation of the surface.
[tex]z = f(x, y) = (x^2/4) + (y^2/25)[/tex]

Step 2: Replace z with the constant c.
[tex]c = (x^2/4) + (y^2/25)[/tex]

Step 3: Rearrange the equation to isolate [tex]y^2[/tex].
[tex]y^2 = 25(c - (x^2/4))[/tex]

However, note that we're given that c < 0. This means that the value inside the parentheses (c - ([tex]x^2/4[/tex])) must also be negative. Since y^2 can't be negative, there's no real solution for this equation.

In conclusion, there is no curve that describes the level curve of value c for the given surface, as the condition c < 0 makes it impossible to find a real solution.

Learn more about curve here:
https://brainly.com/question/31235246

#SPJ11

The response variable in this experiment is the scores on the midterm exam. The response variable is the one that is measured or observed to determine whether it has been affected by the explanatory variable.

The alphabetic character that expresses a numerical value or a number is known as a variable in mathematics. A variable is used to represent an unknown quantity in algebraic equations.

The explanatory variable in this experiment is the type of music played in the background during the exam. The explanatory variable is the one that is deliberately manipulated or changed by the researcher in order to observe its effect on the response variable. In this case, the researcher wanted to investigate whether the type of music played during the exam would have an effect on the students' performance, so they manipulated the type of music and observed its effect on the exam scores.

The response variable in this experiment is the scores on the midterm exam. The response variable is the one that is measured or observed to determine whether it has been affected by the explanatory variable. In this case, the researcher measured the exam scores of the two groups to see if there was a difference between the group that listened to Dave Matthews Band and the group that listened to Death Cab for Cutie.

Learn more about variable on:

https://brainly.com/question/13604758

#SPJ4

Answer:

Step-by-step explanation:

Part A: A histogram would be the best type of graphic to use to depict the supplied data.

The distribution of quantitative data (in this case, the frequency of sandwich consumption) is presented by a histogram, which enables us to see the frequency of various values or ranges. When working with discrete data, as in this instance, it is quite helpful.

Part B: Making a histogram using the provided data

To divide the data set into appropriate intervals or bins, ascertain the range of values covered by the data set (from the least to the maximum value). In this instance, a minimum value of 6 and a maximum value of 30 are acceptable starting points. Based on the distribution of the data, pick an acceptable bin width, such as 5 or 10. Indicate "Number of times a sandwich was eaten" on the horizontal axis and "Frequency" (or "Count") on the vertical axis.

The height of each bar should represent the frequency of values falling within each interval or bin, and the bars should be created for each interval/bin on the horizontal axis.

The height of each bar should represent the frequency of values falling within each interval or bin, and the bars should be created for each interval/bin on the horizontal axis. Counting the number of data points in each bin will yield the frequency.

Due to the fact that each interval is continuous and the values are discrete, make sure the bars are next to one another without any gaps.

Give the histogram a suitable title, like "Frequency Distribution of Sandwich Consumption."

Include a scale on the vertical axis if necessary to make the frequency count obvious.

These instructions will help you generate a histogram that accurately depicts the provided data and shows how frequently sandwiches were consumed by eighth-graders over the course of a 30-day period.

1) In first triangle, x = 65

So, It is isosceles triangle.

2) In second triangle, x = 60

So, It is not isosceles triangle.

3) In third triangle, x = 45

So, It is not isosceles triangle.

4) In fourth triangle, x = 65

So, It is not isosceles triangle.

In first triangle,

Let measure of third angle = x

Hence,

x + 50 + 65 = 180

x + 115 = 180

x = 180 - 115

x = 65

So, It is isosceles triangle.

In second triangle,

Let measure of third angle = x

Hence,

x + 60 + 60 = 180

x + 120 = 180

x = 180 - 120

x = 60

So, It is not isosceles triangle.

In third triangle,

Let measure of third angle = x

Hence,

x + 70 + 65 = 180

x + 135 = 180

x = 180 - 135

x = 45

So, It is not isosceles triangle.

In fourth triangle,

Let measure of third angle = x

Hence,

x + 55 + 60 = 180

x + 115 = 180

x = 180 - 115

x = 65

So, It is not isosceles triangle.

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

The step that is not necessary to conduct each time you use the p-value method is "Multiplying the test statistic by -1."

In hypothesis testing using the p-value method, the general steps include:

Formulating the null and alternative hypotheses.

Selecting an appropriate significance level (alpha).

Collecting and analyzing the data to obtain the test statistic.

Calculating the p-value, which is the probability of observing a test statistic as extreme as or more extreme than the one obtained, assuming the null hypothesis is true.

Comparing the p-value to the significance level.

Making a decision to reject or fail to reject the null hypothesis based on the comparison of the p-value and the significance level.

Providing an interpretation of the results in the context of the problem.

Multiplying the test statistic by -1 is not a standard step in the p-value method. The test statistic itself is calculated based on the data and the hypothesis being tested, and its sign is important in determining the direction of the effect being analyzed.

Multiplying it by -1 would invert the sign, which would change the interpretation and potentially lead to incorrect conclusions. Therefore, this step is not necessary in the p-value method.

Learn more about alternative hypotheses at: brainly.com/question/28331914

#SPJ11

The true statements regarding the measures of center and variability of these data sets are: statements A, C and E.

To analyze the statements regarding the measures of center and variability, let's calculate the required measures for each data set.

For Yard Works:

Tree heights: 7, 9, 7, 12, 5

Mean: (7 + 9 + 7 + 12 + 5) / 5 = 40 / 5 = 8

Median: 7, 7, 9, 12, 5 → Median = 7

Range: 12 - 5 = 7

Mean absolute deviation (MAD): Calculate the absolute difference of each value from the mean, then find the average of those differences.

|7 - 8| + |9 - 8| + |7 - 8| + |12 - 8| + |5 - 8| = 1 + 1 + 1 + 4 + 3 = 10 / 5 = 2

For The Grow Station:

Tree heights: 9, 11, 6, 12, 7

Mean: (9 + 11 + 6 + 12 + 7) / 5 = 45 / 5 = 9

Median: 6, 7, 9, 11, 12 → Median = 9

Range: 12 - 6 = 6

Mean absolute deviation (MAD):

|9 - 9| + |11 - 9| + |6 - 9| + |12 - 9| + |7 - 9| = 0 + 2 + 3 + 3 + 2 = 10 / 5 = 2

Analyzing the statements:

A. The mean of the tree heights at Yard Works is less than the mean of the tree heights at The Grow Station.

True. Mean Yard Works < Mean The Grow Station (8 < 9)

B. The median of the tree heights at Yard Works is greater than the median of the tree heights at The Grow Station.

False. Median Yard Works = Median The Grow Station (7 = 9)

C. The range of the tree heights at Yard Works is greater than the range of the tree heights at The Grow Station.

True. Range Yard Works > Range The Grow Station (7 > 6)

D. The mean absolute deviation of the tree heights at Yard Works is greater than the mean absolute deviation of the tree heights at The Grow Station.

False. MAD Yard Works = MAD The Grow Station (2 = 2)

E. The mean absolute deviation of the tree heights at Yard Works is equal to the mean absolute deviation of the tree heights at The Grow Station.

True. MAD Yard Works = MAD The Grow Station (2 = 2)

In summary, the true statements are: A, C, and E.

Learn more about Measures of center on:

https://brainly.com/question/15214370

#SPJ1