Right amount of gravity​

Answers

Answer 1

the answer is: 9.80665

Answer 2
But gravity is the earths mass that holds you to the ground and if we had no gravity we would just be floating and not walking on ground

Related Questions

What type of reaction heats the water to generate steam in a nuclear power plant

Answers

Fission! Nuclear power plants heat water to generate steam. The steam is used to spin big turbines that create electricity. Nuclear power plants use heat produced during nuclear fission to heat water which becomes steam. In nuclear fission, atoms are split apart to form smaller atoms, releasing energy. Hope this helps!

A mineral breaks into cubes when struck with a rock hammer. It also leaves a red trail when scraped against an unglazed porcelain plate.

Which of the mineral's properties are being measured?

Choose the two correct answers.


streak

color

cleavage

hardness

Answers

The two properties which can be measured from the given information are streak and cleavage of the mineral.

What are minerals?

Minerals are naturally forming inorganic substances having crystal structure and metallic characteristics. They have a definite chemical composition and  homogeneity.

Streak is the color of powder form of mineral and cleavage is how the mineral cleave when we cut through a plane.  Hardness says how much hard the solid is.

When the mineral breaks into cubes when struck with a hammer, we measure its cleavage properties. The red trail on scrapping indicates the streak of the mineral.

Hence, the two properties we can measure from breaking by hammer and scrapping by an unglazed porcelain are its cleavage and streak.

To learn more about minerals, refer the link below:

https://brainly.com/question/18078524

#SPJ2

HELPP

35. A catalyst:
a. actually participates in the reaction.
b. changes the equilibrium concentration of the products.
c. decreases the rate for a reaction.
d. increases the activation energy for a reaction.

Answers

I’m pretty sure it’s D.increases the activation energy for a reaction.

can someone help me im doing chemistry right now and I have a question which I have no idea how to solve and I need to show work it it needs to be shown in scientific notation

(7.6x10^-1)+(2.0x10^-2)

Answers

The answer should be 0.78

A student titrates 0.1719 g of an unknown monoprotic acid to the equivalence point with 21.85 mL of 0.1062 M NaOH. Which of the following is most likely to be the unknown acid? propionic acid (MM 74.08 g/mol) nitrous acid (MM 47.01 g/mol) chlorous acid (MM 68.46 g/mol) benzoic acid (MM 122.12 g/mol) lactic acid (MM: 90,08 gimol)​

Answers

Answer:

Propionic acid

Explanation:

Step 1: Write the generic neutralization reaction

HA + NaOH ⇒ NaA + H₂O

Step 2: Calculate the reacting moles of NaOH

21.85 mL of 0.1062 M NaOH react.

0.02185 L × (0.1062 mol/L) = 2.320 × 10⁻³ mol

Step 3: Calculate the reacting moles of HA

The molar ratio of HA to NaOH is 1:1. The moles of HA are 1/1 × 2.320 × 10⁻³ mol = 2.320 × 10⁻³ mol.

Step 4: Calculate the molar mass of HA

0.1719 g of HA correspond to 2.320 × 10⁻³ moles.

MM = 0.1719 g/2.320 × 10⁻³ mol = 74.09 g/mol

With this molar mass, the most likely acid is propionic acid.

Lars observes a substance to be a solid and to float in water at room temperature (23°C). Based on the given properties, which substance is the most likely identity of this sample?

Substance Melting Point (°C) Boiling Point (°C) Density at Room Temperature (g/cm3)
carbon tetrachloride -22.9 76.7 1.59
cetyl alcohol 49.3 344 0.811
dichlorobenzene 53.5 174 1.25
sulfur hexafluoride -64 -50.8 0.00617
A.
carbon tetrachloride
B.
cetyl alcohol
C.
dichlorobenzene
D.
sulfur hexafluoride

Answers

Answer:D. Sulfur Hexafluride

Explanation:

D. Sulfur Hexafluride

Explanation:

above it says the substance floats above water at room temperature and lists some substances and their density at room temp!

we know that the density of water is 1.0 so the substance in order for it to float has to be less than 1.0 and the densities for Sulfer Hexa, are all less than 1!!

Order these chemical species by increasing of an aqueous solution of each. That is, imagine making an solution of each species. Select next to the species that makes the solution with the lowest . Select next to the species that makes the solution with the next higher , and so on. Notice that some of the rankings have been filled in for you already. Also notice that water is on the list. For that particular case, just compare the of pure water to the of the other solutions.

Species Relative PH of 0.1M aqueous solution
HCOOH
CIO2^-
HCOO^-
H2O
H3PO4
H2PO4
H2PO4^-
H3O^-
HClO2

Answers

Answer:

H3O^+ < HClO2 < H3PO4< HCOOH < H2PO4^-<CIO2^-<H2O< HCOO^-

Explanation:

The pH of a solution refers to the negative logarithm of it's hydrogen ion concentration. Generally, the hydrogen ion concentration of an acid is always greater than that of its conjugate base. Hence, the conjugate acid always has a lower pH than the conjugate base.

This can be seen in the species, H3O^+ and H2O, HClO2 and ClO2^- etc.

If you do not recall the exact date of an event, it is okay to use a general time reference instead.


Please select the best answer from the choices provided

T
F

Answers

Answer:

True

Explanation:

Sorry if this is late lol

Answer:

The answer is True.

Explanation:

Did not copy

A sample of ammonia gas has a volume of 3213 mL at 11°C and a pressure of 822 torr. What will the volume of the gas be in liters if the
moles of gas and the temperature do not change but the pressure changes to 2.33 atm?

Answers

Answer:

We are given:

v1 = 3.2 L                   v2 = x L

p1 = 822 torr OR 1.08 atm        p2 = 2.33 atm

t1 = t2 = 284 k

From the Ideal gas equation:

PV = nRT

Since the number of moles (n), universal gas constant (R) and Temperature (T) are constant

PV = k      (where k is a constant)

it can also be written as:

P1V1 = k --------------------------(1)

Similarly,

P2V2 = k (where k is the same constant as before)----------(2)

Solving for V2:

From (1) and (2):

P1V1 = P2V2

Replacing the variables

1.08 * 3.2 = 2.33 * x

x = (1.08 * 3.2)/2.33

x = 1.5 L (approx)

Therefore, the final volume of the solution will be 1.5L

. If you apply heat to the copper bar, its density will

Answers

Answer:

Decrease

Explanation:

Density is defined as the mass per unit volume. Density is highly influenced by temperature.

The density of metals and copper is inversely proportional to the temperature, it means density of copper decreases with an increase in temperature or when heated. This is so because when the copper is heated, the copper atoms start vibrating faster that allows the collision of atoms with each other faster and occupying more volume than before. As the copper atoms occupy more volume, the density of copper decreases.

Hence, the correct answer is "On applying heat the density of copper decreases".

A balloon containing methane gas has a volume of 1.03 L at 99.0 °C . What volume will the balloon occupy at 198 °C ?

Answers

Answer:

The balloon will occupy a volume of 1.32L.

Explanation:

Given the following data;

Original Volume, V1 = 1.03L

Original Temperature, T1 = 99°C

New Temperature, T2 = 198°C

To find new volume V2, we would use Charles' law.

Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.

Mathematically, Charles is given by;

[tex] VT = K[/tex]

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Converting T1, from Celsius to Kelvin = 273 + 99 = 372K

Converting, T2, from Celsius to Kelvin = 273 + 198 = 471K

[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]

Making V2 as the subject formula, we have;

[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]

[tex] V_{2}= \frac{1.03}{372} * 471[/tex]

[tex] V_{2}= 0.0028 * 471[/tex]

V2 = 1.32L

Therefore, the balloon will occupy a volume of 1.32L at 198°C

what is the volume in cubic meter and in cubic decimeter of 2.0mol of nitrogen on gas at 1000c and 100,000pa? (R=8.31j/molk)​

Answers

Given parameters:

Number of moles of Nitrogen = 2.0mole

Temperature of the gas = 1000c

Pressure on the gas = 100000Pa

Gas constant R = 8.31J/molK = 0.082atmdm³mol⁻¹k⁻¹

Unknown:

Volume in cubic meter and cubic decimeter = ?

Solution:

The ideal gas law is given as;

       PV  = nRT

where P is the pressure on the gas

          V is the volume of the gas

         n is the number of moles

         R is the gas constant

         T is the temperature of the gas

Let us convert to appropriate units;

      1000°C to K;

       K  = 1000 + 273  = 1273K

100000Pa to atm;

           101325Pa  = 1atm

           100000Pa = 0.99atm

 Input the parameters and solve for the unknown;

      0.99 x V  = 2 x 0.082 x 1273

                   V  = 210.9dm³

to m³;

        1000dm³   = 1m³

        210.9dm³ = [tex]\frac{210.9}{1000}[/tex]   = 0.21m³

2.
_______ properties depend on the amount of
matter present

Answers

Answer:

extensive properties

Explanation:

,such as mass and volume, depend on the amount of matter being measured. Intensive properties, such as density and color, do not depend on the amount of the substance present. Physical properties can be measured without changing a substance's chemical identity.

I NEED HELP ASAPPPP!!!!

Is a styrofoam ball heavier than a rock?
Is water heavier than a ping pong ball?
Is a gold ring heavier than a pencil?
Is oil heavier than water?
Is a large log heavier than a small rock?

Answers

Answer:

Styrofoam could be heavier than a rock depending on how much weight you put on it,

Water is heavier than a ping pong ball,

A gold ring is not heavier than a pencil,

Oil is heavier than water because of the combined mass.

A large log is heavier than a small rock.

Explanation:

5) A pure substance which can be decomposed by a chemical change is a

A) mixture
B) compound
C) metal
D) nonmetal

Answers

it’s b compound sksjdhshkaks
The answer would be (B), a compound. By definition, a chemical compound is a substance that is made up of at least two atoms from more than one element. A chemical change involves a change in chemical identity: In decomposition, a substance with its unique chemical identity is broken down into constituent substances that have their own, unique chemical identities.

Helppppppp plssss guysss

Answers

Answer:

3 - coefficient

2 subscripr

6 total #

cl- element symbol


The human eye cannot see anything less than 40 micrometers in size. What is this length in meters?

Answers

Answer:

4e-5 is the length in meters

Have a nice day! :)

Answer quick (image)

Answers

Answer:

The answer is boiling point

How many total hydrogen atoms are in CH3OOH?​

Answers

Answer:

4

Explanation:

In CH3OOH, there is H3, which means 3 hydrogen atoms, but there is also an H at the end, which means another hydrogen atom.

3 + 1 = 4

Weather is not the same as climate. Which claim
identifies the main difference between these two concepts?
A. The main difference is how both are measured
B. Only weather includes information about the
temperature
C. Only climate includes information about
precipitation
O D. The main difference is the length of time over
which both are measured

Answers

Answer:

b. only weather includes information about the temperature

7. The image shows the effects of exposing the plants to different color of
lights. The size of the plant was measured and the number of leaves were
counted if they are alive or dead. Size of plants and number of leaves are
Size of Plant
Number of Leaves
Living or Dead?
science or
What’s the answer?

Answers

Answer:

An apple, potato, and onion all taste the same if you eat them with your nose plugged

Explanation:

D 14 3
N
7
What is the number of protons, neutrons, and electrons?

Answers

Answer:

14

Explanation:

For example, silicon has 14 protons and 14 neutrons. Its atomic number is 14 and its atomic mass is 28. The most common isotope of uranium has 92 protons and 146 neutrons. Its atomic number is 92 and its atomic mass is 238 (92 + 146).

When an atom is trying to obtain stability, what part(s) of the atom change(s)?

Answers

Answer: If the outer shell is filled, the atom is stable. Atoms with unfilled outer shells are unstable, and will usually form chemical bonds with other atoms to achieve stability.

(hope this helps ^^)

What type of compound is iron(III) oxide?
Group A metal ionic compound with nonmetal anion
Group A metal ionic compound with polyatomic anion
transition metal ionic compound with polyatomic anion
transition metal ionic compound with nonmetal anion

Answers

Answer:transition metal ionic compound with nonmetal anion

Explanation:

Answer:

Your answer is going to be D. transition metal ionic compound with nonmetal anion

Hope this helps :)

what is vascuoles ? ​

Answers

Answer:

Vacuoles are essentially enclosed compartments which are filled with water containing inorganic and organic molecules including enzymes in solution, though in certain cases they may contain solids which have been engulfed.

Explanation: i hoped this helped :)

Answer:

vacuole

Explanation:

a space within a cell that is empty of cytoplasm

vacuole is a membrane-bound

radium 226 has a half life of 1600 yers. suppose we have a 300g sample. how much remains after 200 years

Answers

Answer:

[tex]A=275.1g[/tex]

Explanation:

Hello.

In this case, since the radioactive decay is computed via:

[tex]A=A_0*2^{-\frac{t}{t_{1/2}}[/tex]

For the initial amount of Ra-226 (300 g), once 200 years have passed, the remaining mass is:

[tex]A=300g*2^{-\frac{200years}{1600years}}\\\\A=275.1g[/tex]

This is, considering that the half-life is 1600 years, it means that the mass of Ra-226 is decreased.

Best regards.

An aqueous solution is in equilibrium with a gaseous mixture containing an equal number of moles of helium, carbon dioxide, and nitrogen. Rank the relative concentrations of each gas in the aqueous solution from highest to lowest. An aqueous solution is in equilibrium with a gaseous mixture containing an equal number of moles of helium, carbon dioxide, and nitrogen. Rank the relative concentrations of each gas in the aqueous solution from highest to lowest.
[CO2][CO2] > [He][He] > [N2][N2] [N2][N2] > [CO2][CO2] > [He][He] [CO2][CO2] > [N2][N2] > [He][He] [He][He] > [N2][N2] > [CO2][CO2]

Answers

Answer:

[CO2] > [N2] > [He]

Explanation:

The relative concentration of CO2, N2 and He depends on the solubility of each gas in water. The more soluble in water a gas is, the greater its concentration in aqueous solution.

Among the gases listed, CO2 is most soluble in water hence it is expected to have the greatest concentration in solution followed by N2. Helium gas is insoluble in water hence it has the least concentration in the aqueous solution.

What is the difference in drawing Lewis Dot
Structures for ionic and covalent bonds?

Answers

Answer:

In Lewis Dot Structure of Covalent compound it never contain any charge and for Ionic compounds always contain charges.

The Lewis Dot Structure for ionic compounds must demonstrate how the electrons are transported to create the ions in the compound. The Lewis Dot Structures of covalent compounds must demonstrate how the electrons are being shared to finish the octets of each atom in the molecule.

What is an ionic compound ?

A chemical compound known as an ionic compound is one that contains ions bound together by the electrostatic forces known as ionic bonding. Despite having both positively and negatively charged ions, or cations and anions, the molecule is generally neutral.

The term "ionic bonding" refers to a bond in which the ionic character is greater than the covalent character, i.e., when there is a significant difference in the electronegativity of the two atoms, which makes the bond more polar (ionic) than in a covalent bond, where the electrons are distributed more evenly.

The Lewis structures are not frequently drawn for ionic compounds due to the electrical motion of electrons.

Thus, The Lewis Dot Structure for ionic compounds must demonstrate how the electrons are transported to create the ions in the compound.

To learn more about an ionic compound, follow the link;

https://brainly.com/question/9167977

#SPJ2

If you are given 22.990 g of sodium and 12.011 g of carbon, which sample do you expect to have more particles?

Answers

Answer:

they are expected to have the same particles because their masses are the same with there molar mass

Convert 5.4g of NaCl to moles

Answers

Answer:

.0924 moles of NaCl

Explanation:

So you know you have 5.4 g of NaCl and you need to know how many moles there are in this amount of NaCl

You'll need to find the atomic mass of the compound NaCl to help you solve for moles Sodium (Na) on the periodic table has a mass of 22.99 Chlorine (Cl) on the periodic table has a mass of 35.45

Add these two together----> 22.99 + 35.45 = 58.44

Now you can calculate for moles

Written-out method:

5.4 grams of NaCl  |   1 mole of  NaCl              

                                | 58.44 grams NaCl                = .0924 moles of NaCl

Plug into calculator method:

(5.4 g of NaCl/ 58.44g NaCl= .0925 moles)

Other Questions
01101000 01101111 01110111 00100000 01100100 01101111 00100000 01001001 00100000 01100011 01101111 01101101 01101101 01101001 01110100 00100000 01110111 01100001 01110010 00100000 01100011 01110010 01101001 01101101 01100101 01110011 00100000 01100001 01100111 01100001 01101001 01101110 01110011 01110100 00100000 01110100 01101000 01100101 00100000 01101110 01100001 01111010 01101001 01110011 00111111 An atom of a certain element has 18 protons, 18 electrons, and a mass numberof 40. At room temperature this element is a very stable gas. How manyneutrons are in this atom?Record your answer and fill in the bubbles on your answer document. Be sureto use the correct place value. What era did the television occurred in The heart rates in beats per minute for runners who walk briskly on a treadmill for 6 minutes follow a Normal distribution with a mean of 104 and standard deviation of 12.5. What percent of the runners have heart rates above 140? What was Bear B's average speed inm/min? No units required for answer. How did Hammurabi's Code and Draco's Code create unity and order in theircivilizations? hey can someone answer this In which situation would osmosis most likely occur What event helped to unify the delegates around John Adams cause? Why?From HBO Episode on Independence- John Adams Mini series Find the value of x and y how to say greatest common factor in spanish please tell me? Summary of silent spring ***Help!!! It's for an essay!!!!*** How does Indian Civilization and Chinese Civilization reflect the characteristics of civilization????????? Coupon collector is a classic statistic problem with many practical applications. The problem is to pick objects from a set of objects repeatedly and determine how many picks are needed for all the objects to be picked at least once. A variation of the problem is to pick cards from a shuffled deck of 52 cards repeatedly and find out how many picks are needed before you see one of each suit. Assume a picked card is placed back in the deck before picking another. Write a program to simulate the number of picks needed to get total of four cards from each different suit and display the four cards picked (it is possible that a card may be picked twice). Here is a sample run of the program:4 of Diamonds8 of SpadesQueen of Clubs8 of HeartsNumber of picks: 9 a car moving on a road passes by kilometer 218 at 10:15 am and milestone 236 at 10:30 am. determine an average scalar speed in km / h over this stretch. I used 1/3 of a bottle of wax to wax 3/4 of a car. How many cars can I wax with one bottle? Please helppp A company is considering two mutually exclusive expansion plans. Plan A requires a $40 million expenditure on a large-scale integrated plant that would provide expected cash flows of $6.39 million per year for 20 years. Plan B requires a $13 million expenditure to build a somewhat less efficient, more labor-intensive plant with an expected cash flow of $2.91 million per year for 20 years. The firm's WACC is 9%.Calculate each project's NPV. Round your answers to two decimal places. Enter your answers in millions. For example, an answer of $10,550,000 should be entered as 10.55.Plan A $ millionPlan B $ millionCalculate each project's IRR. Round your answer to two decimal places.Plan A %Plan B %Graph the NPV profiles for Plan A and Plan B and approximate the crossover rate to the nearest percent.Calculate the crossover rate where the two projects' NPVs are equal. Round your answer to the nearest hundredth.% What is the slope.of (2,4) and (5,9) describe what stress is and how it affects your body. Why were the hyskos able to conquer the Egyptians