Answer:
Kg (kilograms)
Explanation:
We know it through the International System. If a body has a force of Newtons (N), and an acceleration of meters per square seconds (m/s²), it must have a mass of kilograms (kg).
Greetings.
POSSIBLE 1. Which of the following are examples of a physical reactions: (1) ice melting, (2) pencil breaking, (3) iron rusting, (4) wood burning? a. 1.4 b. 3,4 c. 2.3 d. 1,2
Answer:
D) 1 & 2
Explanation:
Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil
As an electric current flows through the copper sulfate solution, copper settles on the negative electrode. How will the mass of the copper covering this electrode change if we increase the current by 4 times and halve its flow time?
Answer:
Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine
According to the graph, how many atoms would remain after two half-lives?
20 atoms
80 atoms
40 atoms
50 atoms
Answer:
Let No be initial no of atoms
N = N0 / 2 after 1 half-life
N = N0 / 4 after 2 half-lives
So after 2 half-lives 20 of the 80 atoms remain
Martin rides his motorcycle at 20 m/s. suddenly he sees a row of stones
blocking the road 170 m ahead. He applies the brakes and the motorcycle is
decelerated at 2 m/s?. Justify will he be able to stop in time?
Answer: Yes
Explanation:
Given
Martin initial speed is [tex]u=20\ m/s[/tex]
Stones is at 170 m ahead
Deceleration [tex]a=2\ m/s^2[/tex]
Using the equation of motion [tex]v^2-u^2=2as[/tex]
Insert the values
[tex]0-20^2=2\times (-2)s\\s=\dfrac{400}{4}\\\\s=100\ m[/tex]
So, it took 100 m to stop completely. Hence martin will be able to stop in time.
can someone help? i don’t need 14
Answer:
Explanation:
11.) d
12.) f
13.) c
15.) i
pls give me brainliest
Which kind of wave is generated by a plucked guitar string as the molecules
of air around it begin to vibrate?
O A. Transverse
O B. Surface
O C. Electromagnetic
O D. Longitudinal
PLEASE HELP
Answer:
longitudinal
Explanation:
can someone please help me please I will mark brainlist and give you 5 stars pleasee
Answer:
If I did my calculations correctly then the answer is 11 but I may be weong
Answer:
it's 11
gkccgkxcgikvxxkg
the spring constant for each of these springs 100 000 N m-1. Calculate the distance that each of these rear springs is compressed by this vehicle as shown in the diagram above
Answer:
sorry
Explanation:
All electric charge is based on the what in Atoms
Answer:
c. Protons and electrons
Explanation:
electrons carry out negative charge
protons carry out positive charges
How much work is done by 0.070 m3 of gas, when the volume remains constant with pressure of 63 x 105 Pa?
Answer:
W = 0 J
Explanation:
The amount of work done by gas at constant pressure is given by the following formula:
[tex]W = P\Delta V[/tex]
where,
W = Work done by the gas
P = Pressure of the gas
ΔV = Change in the volume of the gas
Since the volume of the gas is constant. Therefore, there is no change in the volume of the gas:
[tex]W = P(0\ m^3)\\[/tex]
W = 0 J
calculate the heat required to change 2.0kg of ice at 0°C to water at 0°C
Answer:
160000 calories or 669440 Joules
Explanation:
Using the formula as follows;
Q = L × m
Where;
Q = amount of heat (J)
L = specific latent heat
m = mass (g)
* Latent heat (L) required for melting of ice is 80 calories/grams.
* Mass of ice in grams = 2kg × 1000 = 2000g.
Hence, Q = 80 × 2000
= 160000 Calories
1 calorie = 4.184J
160000 calorie = 160000 × 4.184
= 669440J
Use the drop-down menu to answer the question.
According to "Take a Closer Look", what type of lens is used to correct nearsightedness?
Answer: A.) concave lens
Explanation: i hope this helps shawtay :)
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.
What is the lens?A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.
Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."
A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.
Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6
How many snowmen do you think this sled can destroy? Explain your answer.
Answer:
342,690
Explanation:
I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)
What is the difference between the spectrum of an incandescent solid and the spectrum of an incandescent gas?
Incandescent solids emit bright-line spectra; incandescent gases emit continuous spectra.
Incandescent solids emit one wavelength; incandescent gases emit several wavelengths.
Incandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Incandescent solids emit scattered spectra; incandescent gases emit continuous spectra.
Answer:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Explanation:
Materials when heated emit a continuous spectrum with all wavelengths.
Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.
When reviewing the answers, the correct one is:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
The diagram below shows a periodic wave. Which two points on the wave are 180 degrees out of phase?
Please explain as well, thanks so much
Answer:
A and C are 180 deg out of phase (opposite points on a 360 deg wave)
The two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
When two points of wave are out of phase?The two points of a wave is said to be out of phase when they show up or down motion at different times.
If a point on the wave, say (X) is reached to the maximum or minimum point before the other point. Then these two points are said to be out of phase.
Also, when the points are 180 degree apart from each other. Which means if a point is in the crest of the wave and other is on the through.
The diagram below shows a periodic wave. In this diagram,
A and I are the end points of the periodic wave.B,C,D,E,F and G are the other points on the periodic wave.Here, the point A and C are opposite point of each other. So they are 180 degrees out of phase.Hence, the two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
Learn more about the periodic wave here;
https://brainly.com/question/16749356
The bumper cars crash into each other and stop. Explain why both bumper cars stop after the crash. [4marks]
Answer:
The collision is inelastic
Explanation:
There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.
However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.
how can a sound of a different note be produced in a guitar without changing the length of wire?
Answer:
how tightly strung the wire is
-- Make the string tighter or looser.
-- Keep the same length, but make the string thicker or thinner.
-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.
Suppose your class invites a person to give a speech. When you test out the sound system in the gym you find there are so many echoes the speaker cannot be understood. What needs to be done to fix this problem?
Answer:
You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.
Explanation:
Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.
. A train passes a stationary observer. Which of the following best describes how the amplitude and the
apparent frequency of the sound waves heard by the observer change as the train moves away?
please dont waste my time with those 'answer is in the file"
The force exerted by water and air on the skier is 50 Newtons (N) to the left. The force exerted by the boat on the skier is 40 Newtons (N) to the right. How will the unbalanced forces change the motion of the skier
[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the concept of Net force on a body.
We know that net force on a body is the force that is calculated from all direction and added , if there is any force remained at last, then the forces are unbalanced,
and if the net force on a body is Zero, then it is a balanced force,
here,
Force to left on skier = 50 N
Force to right on skier = 40 N
hence the net force = left force - right force
Net force = 50 - 40 ==> 10 N
hence the Net force is 10 N in the left direction of the skier.
Heat is the measurement of energy from all the particles that are in a substance.
Please select the best answer from the choices provided : T/F
Explanation:
the correct answer is (true) if am not mistaking incase am wrong sorry
What element is formed in the following nuclear reaction
Answer:
Oxygen or more precisely, the O-15 isotope.
is a
The wire in a simple circuit
which forms an
unbroken pathway, allowing the
electric charges to flow.
A. switch
B. insulator
C. resistor
D. conductor
Answer:
I believe the answer is D: Conductor.
9. Bryce drove his car 10 km from his house to Belle Plaine. It took him 8 minutes. He got stopped at a long
traffic light on the return home and so he took 2 minutes longer on the return trip. What was Bryce's average
speed in km per minute? (3 pt)
Answer:
2 km/minuteExplanation:
Here, we are asked to calculate the average speed in km/minute.
As we know that,
Average speed = Total distance ÷ Total time takenHere,
→ Total distance = 10 km + 10 km
Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.→ Total distance = 20 km
→ Total time = 8 minutes + 2 minutes
→ Total time = 10 minutes
Substitute the values in the formula of average speed,
→ Average speed = Total distance ÷ Total time taken
→ Average speed = 20km ÷ 10 minutes
→ Average speed = 2 km per minuteWhat is a disadvantage of using nuclear power to produce electricity?
Answer:
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
Answer:
Disadvantages of Nuclear Power
The further implementations of nuclear power are limited because although nuclear energy does not produce CO2 the way fossil fuels do, there is still a toxic byproduct produced from uranium-fueled nuclear cycles: radioactive fission waste.
Explanation:
true or false? rocks have organic materials and fossil remains in them
Answer:
trueeeee
Explanation:
what does thermal energy do
Answer:
Thermal energy can be transferred to one object to another in the form of heat. It causes molecules and atoms to collide with each other because of the rising of heat.
Explanation: Well thermal energy is a example of kinetic energy. It is heated by motion. It is heat that can be measured
I WILLL GIVE BRAINLYEST!!!
The following map was created using modern technology to determine the overall temperature change of the oceans. What can be concluded about the relationship between temperature and salinity from the map? (10 points)
Group of answer choices
Areas of water with higher precipitation have a greater salinity.
Decreasing temperatures evaporate water slowly, causing an increase in salinity.
Increasing temperatures evaporate water faster, causing an increase in salinity.
The areas of water without temperature changes will have a greater salinity.
Answer:
Increasing temperatures evaporate water faster, causing an increase in salinity.
Explanation:
When the water molecules of the ocean become heated, they expand. ... Since warmer water thus can hold more salt and other molecules than cold water; it can have a higher salinity.
The correct option is C, increasing temperatures cause faster evaporation of water which results in an increase in salinity.
What does the map represent?Due to the link between ocean temperature and salinity, this map of ocean temperature can easily be compared to a map of ocean salinity.Salinity rises as water temperature rises, and vice versa: the lower the water's temperature, the higher the salinity. The Timor Sea, Arafura Sea, and the northern portion of the Coral Sea can all be seen on this map as having higher temperatures than most of the nearby waters. These regions' shallow water and proximity to the equator, as well as the influence of warm ocean currents, are the main causes of these higher temperatures. In turn, that would imply that they experience greater water evaporation, which adds to greater salt concentration, resulting in more salinity in the water than in other locations.Hence we can conclude that as the temperature rises, the process of evaporation takes place more rapidly which decrease the concentration of salt in water, which leads to higher salinity.
Learn more about temperature mapping here:
https://brainly.com/question/1418606
#SPJ10
What is the intensity of sound produced by an elephant's call if it has a power of 0.45 W and you are standing 32.5 m away from the lumbering beast
Answer:
I = 1.36 x 10⁻⁴ W/m²
Explanation:
The intensity of the sound produced by the Elephant can be calculated by using the following formula:
[tex]I = \frac{P}{A} \\\\[/tex]
where,
I = Intensity of sound = ?
P = power of sound = 0.45 W
A = area = πr² = π(32.5 m)² = 3318.3 m²
Therefore,
[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]
I = 1.36 x 10⁻⁴ W/m²
A solid metal ball with a mass of 10.0 kg is placed on a smooth floor what force would be needed to accelerate the ball at a rate of 2.0 m/s2.
40 N
20 N
5 N
0.2 N