Simplify.
A12 over a7

Answer:

56

Step-by-step explanation:

Since the triangles are similar then the ratios of corresponding sides are equal, that is

[tex]\frac{35+20}{20}[/tex] = [tex]\frac{32+?}{32}[/tex] ( cross- multiply )

20(32 + ?) = 1760 ( divide both sides by 20 )

32 + ? = 88 ( subtract 32 from both sides )

? = 56

Answer:

[tex]\boxed{56}[/tex]

Step-by-step explanation:

We can use ratios to solve since the triangles are similar.

[tex]\frac{20}{32} =\frac{35}{x}[/tex]

Cross multiplication.

[tex]20x=35 \times 32[/tex]

Divide both sides by 20.

[tex]\frac{20x}{20} = \frac{35 \times 32}{20}[/tex]

[tex]x=56[/tex]

Answer:

(10, 17)

Step-by-step explanation:

It might be easier to explain with a picture or drawing, but I am new to this, so I would try using words.

Assuming the fruit market is on that straight line from Tia's home to Lei's, So we look at both address (coordinates)

From Tia to Lei, x coordinate is from 4 to 12, that's increased by 8, divide by 4, one step is 2.

y coordinate is from 8 to 20, an increase of 12, divide by 4 again, one step is 3.

The fruit market is at 3/4 distance, so 3 steps, on both x and y coordinates.

x: 4+6 = 10

y: 8+9=17

The fruit market is at point (10,17)

A graph can be defined as a pictorial representation or a diagram that represents data or values.

The point (x,y) which divides the segment AB with endpoints at A(x₁,y₁) and B(x₂,y₂) in ratio m:n has cordinates

[tex]x= \dfrac{nx_1+nx_2}{m+n}[/tex]

[tex]y= \dfrac{ny_1+ny_2}{m+n}[/tex]

Tia is at P(4, 8) and Lei is at Q(12, 20).

The fruit market (F) is three-fourths the distance from Tia’s home to Lei's home, then PM : PQ = 3:4 or PM : MQ = 3:1

So,

[tex]x= \dfrac{1.4+3.12}{3+1} = \dfrac{4+36}{4} = \dfrac{40}{4} = 10 \\y= \dfrac{1.8+3.20}{3+1} = \dfrac{8+60}{4} = \dfrac{68}{4} = 17[/tex]

Hence, the fruit market is at point (10,17) which means it is placed at the corner of 10th Street and 17th Avenue.

Learn more about graph here:

brainly.com/question/16608196

#SPJ5

Answer:

  80°

Step-by-step explanation:

The sum of the measures of the acute angles in a right triangle is 90°. The sum of ratio measures in the ratio 8 : 1 is (8+1) = 9. Thus, each of those measures stands for 90°/9 = 10°. Then the angle ratio is ...

  80° : 10° = 8 : 1

The measure of the largest acute angle in the triangle is ...

  10° × 8 = 80°

Area of a triangle is 1/2 x base x height.

The graphed triangle has height of 2 and base of 2.

Area = /2 x 2 x 2 = 2 square units.

The triangle gets enlarged by a scale factor of 2, so the new height would be 2 x 2 = 4 and the new base would be 2 x 2 = 4

Area of enlarged triangle = 1/2 x 4 x 4 = 8 square units.

The answer is C) 8

Answer:

x = 4 or x = - [tex]\frac{5}{7}[/tex]

Step-by-step explanation:

Given

(2x - 8)(7x + 5) = 0

Equate each factor to zero and solve for x

2x - 8 = 0 ⇒ 2x = 8 ⇒ x = 4

7x + 5 = 0 ⇒ 7x = - 5 ⇒ x = - [tex]\frac{5}{7}[/tex]

Answer:

x=15

angle b=7*15=105

angle a=180-105=75

angle c=2x=30

Step-by-step explanation:

b=7x

sum of straight angle :=180

isoceles traingle = 2 sides are equal, and two angles are equal

b+a=180

7x+a=180

sum of traingle =180

2a+c=180

2a+2x=180  first equation

7x+a=180    second equation

solve by elimination ( multiply second equation by 2)

2a+2x=180

2a+14x=360 ( subtract)

2a+2x-2a-14x=180-360

-12x=-180

x=-180/12=

x=15

angle b=7*15=105

angle a=180-105=75

angle c=2x=30

Answer:

(B), in which the first two values are 2 and 10.

Step-by-step explanation:

We can tell that this is a proportional relationship because we can examine the numbers in there.

(2,10)

(4,20)

and (6,30).

If you notice, the x value times 5 gets us the y value for every single point there.

Therefore, B is proportional and it's equation is y = 5x.

Hope this helped!

Answer:

B.

Step-by-step explanation:

B. Is the only one that proportional because,

(2,10)

(4,20)

(6,30)

All these x values multiply by 5 to get the y value.

So the equation is y = 5x meaning it is linear and it goes through the origin which makes it proportional.

Thus,

answer choice B is correct.

Hope this helps :)

Answer:

We could rewrite 7/2 as 7a + 2

Step-by-step explanation:

Complex numbers is when real numbers [i.e: 1, 1/2, 200, 5/7, etc..) and an imaginary numbers [numbers that give a negative result when squared] are combine together.

Answer:

y>9x+6

Step-by-step explanation:

y-9x+(9x)>6+(9x)

y>9x+6

Answer:

3

1/5

3/4

3/4

Step-by-step explanation:

Coefficient is a number that is always written in front of a term.

3xy^3=3

xy/5=1/5

3/4xy=3/4

3/4x^2y=3/4

Hope this helps ;) ❤❤❤

Answer:

28.142m

Step-by-step explanation:

area of rectangle=width x lenght

so; (rotating the formula with what is given)

area of rectangle/width=lenght

197/7=lenght

28.142m =lenght

Answer:

Length is 18 m and width is 11 m

Step-by-step explanation:

So based on the information given length is seven cm more than your width, and since we don’t know the values of these, we can plot this information into a formula that looks like this: (x+7)(x)=198, which is basically how you take the area of the plot of land.

If you multiply your values, you will get a quadratic equation that looks like this x²+7x-198. If you follow the quadratic formula to solve this equation, the positive result you will get for x is 11, this is your width. And since length exceeds by 7, you just add 7 to 11 to find the length, which ends up being 18.

to verify, you can simply multiply these two values

Answer:

[tex]\frac{9}{4}/\frac{3}{2}[/tex]

Step-by-step explanation:

[tex]-2\frac{1}{4}[/tex] is equilavalent to [tex]-\frac{9}{4\\}[/tex].

[tex]-\frac{2}{3}[/tex] can stay put.

The equation is division so neither answers #2 and #3 are the correct ones because when dividing fractions the second fraction has to be flipped in order to continue multiplying instead.

In addition, when two negatives are put together the answer must always be positive.  

Hence the answer is [tex]\frac{9}{4}/\frac{3}{2}[/tex].

Answer:

30

Step-by-step explanation:

4/5 (x-20)=8

4/5x-4/5*20=8

4/5x-16=8

4/5x=24

x=(24*5)/4

x=30

hope it helps..

Answer:

1. True

2. False.

3. True.

Step-by-step explanation:

1. The total area within any continuous probability distribution is equal to 1.00: it is true because the maximum probability (value) is one (1), therefore, the total (maximum) area is also one (1).

Hence, for continuous probability distribution: probability = area.

2. For any continuous probability distribution, the probability, P(x), of any value of the random variable, X, can be computed: False because it has an infinite number of possible values, which can not be counted or uncountable.

Hence, it cannot be computed.

3. For any discrete probability distribution, the probability, P(x), of any value of the random variable, X, can be computed: True because it has a finite number of possible values, which are countable or can be counted.

Hence, it can be computed.

Answer:

<

Step-by-step explanation:

D. The line is perpendicular to the plane determined by the two lines.

Remember how you get to 3D space?

You take one axis called x and perpendicularly intersect it with y axis and you get a 2D plane. Now take a 2D plane and perpendicularly intersect it with an axis z and you get 3D euclidean space.

Hope this helps.

Answer: sample space

Step-by-step explanation: In determining the probability of a certain event occurring or obtaining a particular outcome from a set of different possible outcomes, such as in the toss of coin(s), rolling of fair die(s), the sample space comes in very handy as it provides a simple breakdown and segmentation of all possible events or outcomes such that in Calculating the probability of occurrence of a certain event, the event(s) is/are located in the sample space and the ratio taken over the total number of events.

Answer:

             [tex]\bold{A_{_{\Delta XYZ}}=927.5\ cm^2}[/tex]

Step-by-step explanation:

m∠Z = 180° - 118° - 28° = 34°

[tex]\sin(28^o)\approx0.4695\\\\\sin(118^o)=\sin(180^o-62^o)=\sin62^o\approx0.8829 \\\\\sin(34^o)\approx0.5592\\\\[/tex]

[tex]\dfrac{\overline{XY}}{\sin Z}=\dfrac{\overline{YZ}}{\sin X}\\\\\\\overline{XY}=\dfrac{\overline{YZ}}{\sin X}\cdot\sin Z\\\\\\\overline{XY}=\dfrac{42}{0.4695}\cdot0.5592\\\\\overline{XZ}=50.024281...\\\\\\A_{_{\Delta XYZ}}=\frac12\cdot\overline{XY}\cdot\overline{YZ}\cdot\sin(\angle Z)\\\\\\A_{_{\Delta XYZ}}\approx\frac12\cdot50.0243\cdot42\cdot0.8829=927.4955...\approx927.5[/tex]

Answer:

[tex]\approx[/tex] 11 litres of water will fit inside the container.

Step-by-step explanation:

As per the given figure, we have a container formed with combination of a right angled cone placed at the top of a right cylinder.

Given:

Height of cylinder, [tex]h_1[/tex] = 15 cm

Diameter of cylinder/ cone, D = 26 cm

Slant height of cone, l = 20 cm

Here, we need to find the volume of container.[tex]\\Volume_{Container} = Volume_{Cylinder}+Volume_{Cone}\\\Rightarrow Volume_{Container} = \pi r_1^2 h_1+\dfrac{1}{3}\pi r_2^2 h_2[/tex]

Here,

[tex]r_1=r_2 = \dfrac{Diameter}{2} = \dfrac{26}{2} =13\ cm[/tex]

To find the Height of Cylinder, we can use the following formula:

[tex]l^2 = r_2^2+h_2^2\\\Rightarrow h_2^2 = 20^2-13^2\\\Rightarrow h_2^2 = 400-169\\\Rightarrow h_2^2 = 231\\\Rightarrow h_2=15.2\ cm \approx 15\ cm[/tex]

Now, putting the values to find the volume of container:

[tex]Volume_{Container} = \pi \times 13^2 \times 15+\dfrac{1}{3}\pi \times 13^2 \times 15\\\Rightarrow Volume_{Container} = \pi \times 13^2 \times 15+\pi \times 13^2 \times 5\\\Rightarrow Volume_{Container} = \pi \times 13^2 \times 20\\\Rightarrow Volume_{Container} = 10613.2 \approx 10613\ cm^3[/tex]

Converting [tex]cm^{3 }[/tex] to litres:

[tex]10613 cm^3 = 10.613\ litres \approx 11\ litres[/tex]

[tex]\approx[/tex] 11 litres of water will fit inside the container.

Step-by-step explanation:

bhdjdjsjshhdfhfbtvyvyvjdjshdjfy

Answer:

it is c because i took test review

Step-by-step explanation:

Answer:

C The solution should be 6, and the cyclists will need to ride 6 laps before the sprint to the finish.

k = b + 13

k - 19 = b - 6

k = b + 19 - 6

k = b + 13

Answer:

[tex]\boxed{k=b+13}[/tex]

Step-by-step explanation:

[tex]k-19=b-6[/tex]

Add 19 on both sides.

[tex]k-19+19=b-6+19[/tex]

[tex]k=b+13[/tex]

Answer:

divide the number by 8 and write the remainder like this 10 r 5.Then you get your answer by going through the remainders in an upward direction. So the answer is 125

Answer:

O B. 17 units

Step-by-step explanation:

The chord is AC and the radius of the circle is perpendicular to the chord at B. AB = 8.5 units. According to the perpendicular bisector theorem, if the radius of a circle is perpendicular to a chord then the radius bisects the chord. This means that chord AC is bisected by the radius of the circle at point B. The length of the circle is calculated using:

[tex]AB=\frac{AC}{2}\\ AC=2*AB\\cross multiplying:\\AC = 2*8.5\ units\\AC = 17 \ units[/tex]

The length of the chord is 17 units.

Answer:

The answer is 17 units :D

Step-by-step explanation:

Answer:

Yes, because each x-value corresponds to one y value.

Step-by-step explanation:

If you look at the table, you notice that there is one output (y) for every input (x). This means that it is a function. It would NOT be a function if you had two outputs for an input. For example, there are two x values that are 6. For one coordinate pair, the table says (6,9) and (6,8). Since there are two values for the same input- it wouldn't be a function. In this case, there is an input of 4 and 5 with the same output. That is okay! Even though they have the same y value, those inputs still only have ONE output.

Answer:

Step-by-step explanation:

Hello,

For any function f which has an inverse function we can write

[tex]x=(f^{-1}of)(x)=(fof^{-1})(x)=f(f^{-1}(x))[/tex]

This is why, in practice, to find the inverse of f we will consider f(x) = y and we will look for x as a function of y, so we switch x and y and solve for y. Let's do it.

Step 1 - The function f(x) can be written as a variable.  [tex]\boxed{y}=f(x)[/tex]

f(x) = y = 5x + 2

Step 2 - switch the variables x <-> y

x = 5y + 2

subtract 2 to both parts of the equation

<=> x - 2 =  5y + 2 - 2 = 5y

divide by 5 both parts of the equation

[tex]<=> y=\dfrac{x-2}{5}[/tex]

It means that the inverse of f is as below.

[tex]\boxed{ \ f^{-1}(x)=\dfrac{x-2}{5}\ }[/tex]

Step 3 - Find the inverse of g(x)

We already found that the inverse of f is g, so the inverse of g is f.

Let's do it again.

[tex]g(x)=y=\dfrac{x-2}{5} \ \ \text{ switch x and y } \\ \\ x= \dfrac{y-2}{5} \ \ \text{ solve for y }\\ \\ y-2=5x \ \ \text{ mulitply by 5 both parts of the equation } \\ \\ y = 5x+2 \ \ \text{ add 2 to both parts of the equation }[/tex]

And we found what we already known, meaning f is the inverse of g.

[tex](gof)(x)=(fog)(x)=x[/tex]

Hope this helps.

Do not hesitate if you need further explanation.

Thank you

Answers and Step-by-step explanation:

Step 1:

We want to find the variable that ff(x) represents. Well, we know it can't be x because we already have x on the other side of the equation: ff(x) = 5x + 2.

So, ff(x) must equal y.

Since ff(x) = y, we know then that ff(x) = y = 5x + 2. And our equation is:

y = 5x + 2

Step 2:

Let's switch the variables now. This means that what used to be y will be x and what used to be x will be y:

y = 5x + 2  ⇒  x = 5y + 2

Subtract 2 from both sides:

5y = x - 2

Divide by 5 from both sides:

y = (x - 2)/5

Step 3:

Let's find the inverse of g(x) by doing the exact same thing as we did with ff(x):

g(x) = y = (x - 2)/5

Switch the variables:

y = (x - 2)/5  ⇒      x = (y - 2)/5

Multiply by 5 on both sides:

5x = y - 2

Add 2 to both sides:

y = 5x + 2

Notice that this is the exact same as ff(x)! This means that ff(x) and g(x) are inverses.

Answer:

Step-by-step explanation:

It depends on how it is written. By definition

[tex]\csc(x) = (\sin(x))^{-1} = \frac{1}{\sin(x)}[/tex]

[tex]\sec(x) = (\cos(x))^{-1} = \frac{1}{\cos(x)}[/tex]

[tex]\cot(x) = (\tan(x))^{-1} = \frac{1}{\tan(x)}[/tex]

however the functions

[tex]\sin^{-1}(x), \cos^{-1}(x), \tan^{-1}(x)[/tex] are the inverse functions of sine, cosine and tangent respectively. So, they are not equivalent functions

Answer:

Part 1: 359,007 ft³

Part 2: 216 times smaller

Part 3: 21600%

Step-by-step explanation:

Part 1:

The parameters for the tank are;

The radius of the tank = 70 feet

The volume of a sphere = 4/3·π·r³

Therefore, the volume of a quarter sphere = 1/4×The volume of a sphere

The volume of a quarter sphere = 1/4×4/3·π·r³ = π·r³/3

Plugging in the value for the radius gives

Volume = π×70³/3 = 114,333.33×3.14 = 359,006.7≈ 359,007 ft³.

Part 2:

The dimension of the scale model  = 1/6 × Actual dimension

Therefore, we have the radius of the sphere of the scale model = 1/6 × 70

Which gives;

The radius of the sphere of the scale model = 35/3 = 11.67 feet

The volume of the scale model = π·r³/3 = (3.14×11.67³)/3 = 1662.07 ≈ 1662 ft³

The number of times smaller the scale model is than the actual volume = (Actual volume)/(Scale model) = (359,007 ft³)/(1662 ft³) = 216 times

The number of times smaller the scale model is than the actual volume =  216 times = (1/Scale of model)³ = (1/(1/6))³ = 6³.

Part 3:

The percentage of the mock-up, x, to the volume of the actual tank is given as follows

x/100 ×  1662  = 359,007

∴ x = 216 × 100 = 21600%

The percentage of the mock-up, to the volume of the actual tank is 21600%.

Answer:

Part 1: 359,007 ft³

Part 2: 216 times smaller

Part 3: 21600%

Step-by-step explanation:

Part 1:

The parameters for the tank are;

The radius of the tank = 70 feet

The volume of a sphere = 4/3·π·r³

Therefore, the volume of a quarter sphere = 1/4×The volume of a sphere

The volume of a quarter sphere = 1/4×4/3·π·r³ = π·r³/3

Plugging in the value for the radius gives

Volume = π×70³/3 = 114,333.33×3.14 = 359,006.7≈ 359,007 ft³.

Part 2:

The dimension of the scale model  = 1/6 × Actual dimension

Therefore, we have the radius of the sphere of the scale model = 1/6 × 70

Which gives;

The radius of the sphere of the scale model = 35/3 = 11.67 feet

The volume of the scale model = π·r³/3 = (3.14×11.67³)/3 = 1662.07 ≈ 1662 ft³

The number of times smaller the scale model is than the actual volume = (Actual volume)/(Scale model) = (359,007 ft³)/(1662 ft³) = 216 times

The number of times smaller the scale model is than the actual volume =  216 times = (1/Scale of model)³ = (1/(1/6))³ = 6³.

Part 3:

The percentage of the mock-up, x, to the volume of the actual tank is given as follows

x/100 ×  1662  = 359,007

∴ x = 216 × 100 = 21600%

The percentage of the mock-up, to the volume of the actual tank is 21600%.