Some students were investigating the speed of a toy car they built. They performed two trials and recorded the data in the table below. What was the average speed of the toy car during the two trials to the nearest tenth of m/s
Answers
Answer:
It's 3.0
Hope this helps
Related Questions
How many grams of water, H 2 O , is given o when 62.1 g of propane, C 3 H 8 , burns?
Answers
Answer:
101.62 grams of water is given o when 62.1 g of propane burns.
Explanation:
Propane gas (C₃H₈) burns with oxygen gas and products carbon dioxide gas and liquid water. The balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By stoichiometry, the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 5 moles CO₂: 3 moles H₂O: 4 molesBeing the molar mass of each compound:
C₃H₈: 44 g/mole O₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleBy stoichiometry, the following mass quantities of each compound participate in the reaction:
C₃H₈: 1 mole* 44 g/mole= 44 grams O₂: 5 moles* 32 g/mole= 160 gramsCO₂: 3 moles* 44 g/mole= 132 gramsH₂O: 4 moles* 18 g/mole= 72 gramsThen you can apply the following rule of three: if by stoichiometry 44 grams of propane produces 72 grams of water, 62.1 grams of propane how much mass of water does it produce?
[tex]mass of water=\frac{62.1 grams of propane*72 grams of water}{44 grams of propane}[/tex]
mass of water= 101.62 grams
101.62 grams of water is given o when 62.1 g of propane burns.
where does energy come from? newsela
Answers
Answer:
All of our energy comes from the sun.
Explanation:
The sun sends out huge amounts of energy through its rays every day. Without the sun, life on earth would not exist, since our planet would be totally frozen.
Which of the following statements explains which trial has a lower concentration of the reactant? (5 points) Trial 1, because the average rate of the reaction is lower. Trial 1, because this reaction lasted for a longer duration than Trial 2. Trial 2, because this reaction was initially fast and later slowed down. Trial 2, because the v
Answers
Answer:
A)Trial 1 because the average rate of reaction is lower.
Explanation:
I accidentally gave myself low rating my bad
The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
What is a Chemical reaction?Chemical reaction refers to reaction that take place between reacting substances in which the chemical substances are transformed to products.
When the concentration of the reactants increases, more molecules tend to interact with each other in order to form new compounds, and the rate of reaction increases. When the concentration of the reactants reduces, there are little of that molecule present, and the rate of reaction decreases
Therefore, The statement that best explain which trial has a lower concentration of the reactants is Trial 1, because this reaction lasted for a longer duration than Trial 2.
Learn more about chemical reaction below.
https://brainly.com/question/16416932
HELPP asap I’ll mark you as brainlister
Answers
Answer: the answer is D the last one.
Explanation:
hope this helps! have a good day! :) ^-^
Is a animal searching for water a stimulus or response
Answers
Answer:
response I believe
Explanation:
i'm pretty sure it's a response cause it's the animal responding to needing water and being thirsty
hope this helps! :)
What is the molarity of 42.1 g of AgNO3 dissolved in 1.75 L of solution?
2.31 M
B 0.248 M
C 0.142 M
D 24.1 M
Answers
Balance the following chemical equation by providing the correct coefficients:
[ ]N2 + [ ]H2 -> [ ]NH3
Nitrogen + hydrogen produces ammonia (NH3)
Answers
Answer:
1 N2 + 3 H2 --> 2 NH3 :))) !!
Look at the picture below. What is the name of the copper salt?
Answers
Answer:
The reaction took place is-
Fe + CuSO4 → Fe(SO4) + Cu
the copper salt name is copper sulphate!
The statement describes the name of the copper salt is "copper sulphate."
What are salt?A salt is an ionic substance that is created when a positively charged ion bonds with a negatively charged ion.
The reaction occurred in the context of the image.
Fe + CuSO4(aq) → FeSO4(aq) + Cu(s)
A single displacement reaction is the sort of reaction. In this reaction, the highly reactive metal iron oxidises and creates ferrous sulphate by replacing the copper in copper sulphate by giving up two electrons.
Hence the correct answer is copper sulphate.
Learn more about salt here,
https://brainly.com/question/24893919
#SPJ2
A nuclear power plant is used to generate:
steam
solar energy
heat energy
electricity
Answers
Answer:
Anuclear power plant is used to generate electricity
Answer:
Anuclear power plant is used to generate electricity
thank me later
Explanation:
The track along which electricity flows is called a:
fuse
circuit
switch
Answers
Durante una determinación de acidez en una muestra contaminada, agregas como indicador fenolftaleina y torno a violeta. ¿Qué sustancia utilizarías para titular NaOH o HCI? Y ¿Por qué?
Answers
Answer:
HCl, ya que la sustancia es una base que se debe titular con un ácido.
Explanation:
¡Hola!
En este caso, teniendo en cuenta la descripción inicial de la sustancia, la cual se torna violeta cuando se le agrega la fenolftaleína, es posible inderir que esta sustancia es una base con pH básico. Ahora bien, en torno a la especificación de un proceso de titulación, es claro que dicha base debe ser titulada con un ácido, y este caso, con HCl, ácido chlorhídrico, con el fin the alcanzar el punto de equivalencia.
¡Saludos!
what are two places that producers can get energy?
Answers
Answer:
The Food Chain: The answer has to do with trophic levels. As you probably know, the organisms at the base of the food chain are photosynthetic; plants on land and phytoplankton (algae) in the oceans. These organisms are called the producers, and they get their energy directly from sunlight and inorganic nutrients.
Explanation:
Brainliest?
HELP!
NaCl is made from 1 Na and 1 Cl. If I have 45.978 grams of Na, how many grams of NaCl can I make? (You will have to convert to moles of Na first!)
explain answer
Answers
Answer:
116.88 g
Explanation:
Step 1: Write the balanced equation for the synthesis of NaCl
Na + 1/2 Cl₂ ⇒ NaCl
Step 2: Calculate the moles corresponding to 45.978 g of Na
The molar mass of Na is 22.990 g/mol.
45.978 g × 1 mol/22.990 g = 1.9999 mol
Step 3: Calculate the number of moles of NaCl formed from 1.9999 moles of Na
The molar ratio of Na to NaCl is 1:1. The moles of NaCl formed are 1/1 × 1.9999 mol = 1.9999 mol.
Step 4: Calculate the mass corresponding to 1.9999 moles of NaCl
The molar mass of NaCl is 58.443 g/mol.
1.9999 mol × 58.443 g/mol = 116.88 g
Using dimensional analysis, convert 523.7 cm into feet. (1 in= 2.54 cm; 12 in=1 ft)
-15962
-2471
-17.18
-43.64
Answers
Answer:
17.18
Explanation:
(1 in = 2.54 cm; 12 in = 1 ft)
Formula:- Divide the length value by 30.48
523.7 ÷ 30.48 = 17.181
Thus, The answer is 17.181
-TheUnknownScientist
Answer:
17.18
Explanation:
I hope its helpful......
When the wave passes through the medium
Answers
Answer: hewo, there! your answer is Below
A single disturbance passing through a medium is called a pulse.
Explanation:
When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.
Hope this helps !!
Have a amazing day !!!!
Answer:
When the energy of a wave passes through the medium, particles of the medium move. The more energy the wave has, the farther the particles of the medium move. The distance the particles move is measured by the wave's amplitude.
Explanation:
A single disturbance passing through a medium is called a pulse. When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.
What is the equilibrium constant for the chemical equation:
1. N2 (g) + 3H2 (g) ↔ 2NH3 (g)
At equilibrium, the concentration of N2 is 2.5 x 10-4 M, the concentration of H2 is 6.4 x 10-3 M, and the concentration of NH3 is 5.3 x 10-2 M.
Write out the equilibrium constant, Keq, and show you work.
2. Mg3P2 (s) ↔ 3Mg+2 (aq) + 2P-3 (aq)
At equilibrium, the concentration of Mg3P2 is 5.5 x 10-6 M, the concentration of magnesium ions is 7.2 x 10-5 M, and the concentration of phosphide ions is 9.8 x 10-8 M.
Write out the equilibrium constant, Keq, and show you work.
Answers
Answer:
beaner
Explanation:
Answer:
x= 1 /5 y+ 4 /5
Explanation:
Let's solve for x.
10x−2y=8
Step 1: Add 2y to both sides.
10x−2y+2y=8+2y
10x=2y+8
Step 2: Divide both sides by 10.
10x /10 = 2y+8 /10 x= 1 /5 y+ 4 /5
A certain element has only two naturally occurring isotopes: one with 18 neutrons and the other with 20 neutrons. The element forms I- charged ions when in ionic compounds. Predict the identity of the element. What number of electrons does the charged ion have?
Answers
Answer:
[Cl-18]⁻ & [Cl-20]⁻
Explanation:
By definition isotopes are elements with the same number of protons by different number of neutrons. Elements X-18 & X-20 have 17 protons and represent Chlorine isotopes Cl-18 & Cl-20 each with 17 protons and 18 electrons to give the isotopes a -1 oxidation state. Both isotope of chlorine have 7 electron in its valence shell and 10 electrons in its core structure. Gaining 1 electron fills the valence octet and establishes a -1 oxidation state.
Difference between electro positive and electronegative radical
Answers
Answer:
Here's your answerExplanation:
The key difference between electropositive and electronegative radicals is that electropositive radicals are radical compounds having the capacity to electrons and carry a positive charge whereas electronegative radicals are radical compounds having the capacity to gain electrons and carry a negative charge.
I hope it's helpful for you
A pool float was filled with air to capacity in the middle of a hot day. The next morning the pool float looked different yet no gas escaped or entered the float. Describe what you think the float looked like in the morning and why it occurred.
Answers
Answer:
The pool float looked would have looked deflated the next morning.
Explanation:
When temperature decreases the volume decreases.
Horticulture 100 POINTS Hurry
Which of the following is an example of an indirect expense?
A. corn oil
B. animal fodder
C. export commodity
D. snack foods
Answers
Answer:
B!
Explanation:
Answer:
i know im late but i just really want the points. the answer is b.
Explanation:
Complete each nuclear reaction equation.
Superscript 14 subscript 7 upper N plus superscript 4 subscript 2 upper H e right arrow superscript question mark subscript 8 upper O plus superscript 1 subscript question upper H.
Nitrogen transmutes to form an isotope of oxygen. The superscript for oxygen is?
The subscript for hydrogen is?
Superscript 59 subscript question mark upper C o plus superscript 1 subscript 0 n right arrow superscript 60 subscript 27 upper C o.
Cobalt-59 accepts a neutron to form a new isotope. The subscript for cobalt is?
Answers
Nitrogen transmutes to form an isotope of oxygen. The superscript for oxygen is 17
The subscript for hydrogen is 1
Cobalt-59 accepts a neutron to form a new isotope. The subscript for cobalt is 27
Answer:
Oxygen = 17
Hydrogen = 1
Cobalt = 27
Explanation:
Which of the following birds is not a second-order prairie consumer?
owl
falcon
eagle
pheasant
Answers
Pls help me and thank youuuu
Answers
PLEASE HELP
Find the kinetic energy of the horse using KE=1/2mv^2.
Answers
Answer:
78878
Explanation:
58. What is the temperature if 30.1 g of N, in a 1.00-L container is at a pressure of 25.2 atm?
DUE TONIGHT. LINKS DONT WORK SO PLS SHOW WORK. THANK YOU SO MUCH
Answers
Answer:
14°C
Explanation:
In order to use the ideal gas law, you need the number of moles of N2 present.
30.1 g x (mol / 28.02 g) = 1.07 mol N2
Use the ideal gas law: PV = nRT
Now isolate for T(temperature) and plug in your other values:
T = PV / nR
T = (25.2 atm)(1.00 L) / (1.07 mol)(0.08206)
T = 287 K
T(°C) = 287 K - 273 K = 14°C
Therefore, the temperature is 14°C
Create the Equation: How many grams of Aluminum Chloride would be made in a reaction between 50.0 g of Aluminum and 125g of Magnesium Chloride?
Answers
Answer:
0g
Explanation:
Magnesium is more reactive than aluminium so no reaction occurs
The heat of vaporization of a liquid is 84.0 J/g. How many joules of heat would it take to completely vaporize 172 g of this liquid at its boiling point?
Answers
Answer:
14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.
Explanation:
The heat Q that is necessary to provide for a mass m of a certain substance to change phase is equal to Q = m*L, where L is called the latent heat of the substance and depends on the type of phase change.
During the evaporation process, a substance goes from a liquid to a gaseous state and needs to absorb a certain amount of heat from its immediate surroundings, which results in its cooling. The heat absorbed is called the heat of vaporization.
So, it is called "heat of vaporization", the energy required to change 1 gram of substance from a liquid state to a gaseous state at the boiling point.
In this case, being:
Q=?m= 172 gL= 84 [tex]\frac{J}{g}[/tex]and replacing in the expression Q = m*L you get:
Q=172 g*84 [tex]\frac{J}{g}[/tex]
Q=14,448 J
14,448 J of heat would it take to completely vaporize 172 g of this liquid at its boiling point.
Pls help me I don’t know what to dooooo
Answers
The solute here is NaCl, of which we have 46.5 g. To calculate the molarity of an NaCl solution, we need to know the number of moles of NaCl. To convert from grams to moles, we divide the mass by the molar mass of NaCl. The molar mass of NaCl is the sum of the atomic masses of Na and Cl: 23 amu + 35 amu = 58 amu. For our purposes, we can regard amu as equivalent to grams/mole.
(46.5 g)/(58 g/mol) = 0.8017 moles NaCl.
Now that we know both the number of moles of our NaCl solute and the volume of the solution, we can calculate the molarity:
(0.8017 moles NaCl)/(2.2 L) = 0.364 M.
I'll give 50 pts and brainliest
Briefly explain the different types of mining and the processes!!
Answers
Answer:
Response is below
Explanation:
The different types of mining are underground, surface, placer, and in-situ. Underground mining uses various materials to excavate resources from beneath the surface of the Earth. Surface mining is a category of mining that in which soil and rock overlying the mineral deposit are removed. Placer mining is the mining of stream bed deposits for minerals. In-situ mining is a mining process used to recover minerals such as copper and uranium through boreholes drilled into a deposit.
What does Aluminum and Magnesium oxide create
Answers
Answer: MgAl2O4 or Spinel (gemstone)
Explanation: