Someone please help me! And I will mark you as brainlist!!

1) A ball with a mass of 2.0 kg is thrown upward 1.2m calculate its gravitational potential energy into two significant figures. Gravity = 9.8 N/kg

• 2.4 J
• 1.4 J
• 120 J
• 24 J


2) Translation kinetic energy is defined as the energy of a system due to the motion of the system’s...

• center of mass
• axis of symmetry
• molecules
• rotational movement

PLEASE HELP!!

Answers

Answer 1

Answer:

1. G.P.E = 24 J

2. center of mass

Explanation:

Given the following data;

Mass = 2kg

Height, h = 1.2m

Acceleration due to gravity = 9.8 N/kg or m/s².

To find the gravitational potential energy;

Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.

Mathematically, gravitational potential energy is given by the formula;

[tex] G.P.E = mgh[/tex]

Where;

G.P.E represents potential energy measured in Joules.m represents the mass of an object. g represents acceleration due to gravity measured in meters per seconds square. h represents the height measured in meters.

Substituting into the formula, we have;

[tex] G.P.E = 2*1.2*9.8 [/tex]

G.P.E = 23.52 to 2 S.F = 24 Joules.

Translation kinetic energy is defined as the energy of a system due to the motion of the system’s center of mass. The center of mass is typically where the mass of the object or particle is concentrated.


Related Questions

Does an infrared wave or an x-ray travel faster in the vacuum of space?

Answers

Ok no se si te puedo

Answer:

All electromagnetic radiation, of which radio waves and X-rays are examples, travels at the speed c in a vacuum. The only difference between the two is that the frequency of X-rays is very much higher than radio waves

Three capacitors, C1 = 2 μF, C2 = 4 μF, C3 = 4 μF, are connected in series Determine the capacitance of a single capacitor that will have the same effect as the combination.​

Answers

Answer:

1 μF

Explanation:

To obtain the answer to the question, all we need to do is to calculate the equivalent capacitance of the capacitors. This can be obtained as illustrated below.

From the question given above, the following data were obtained:

Capacitor 1 (C₁) = 2 μF

Capacitor 2 (C₂) = 4 μF

Capacitor 3 (C₃) = 4 μF

Equivalent capacitance (Cₑq) =?

Cₑq = 1/C₁ + 1/C₂ + 1/C₃

Cₑq = 1/2 + 1/4 + 1/4

Cₑq = (2 + 1 + 1)/4

Cₑq = 4/4

Cₑq = 1 μF

Thus, the answer to the question is 1 μF

Aluminum has a shear strength of 210 megapascals. When you bend aluminum foil around an edge (i.e., the edge of the box) and pull, you are effectively applying a shear force along the bent edge of the foil. If a roll of household aluminum foil is 30.0 centimeters wide and its thickness is approximately 15.0 micrometers, how much shear force is needed to pull off a sheet

Answers

Answer:

The answer is "[tex]945\ N[/tex]"

Explanation:

Aluminum has 210 megapascals of tensile resistance. They choose a shear force only at bent foil edge to bend aluminum foil over an edge (that is the edge of its box) to pull them. When a roll of aluminium domestic foil is 30 cm in width and about 15.0 micrometers.

[tex]\to 0.000015 \times 0.300 = 0.0000045\\\\\to 210000000 = \frac{F}{0.0000045}\\\\\to F=210000000 \times 0.0000045\\\\\to F = 945\ N[/tex]

A flag is waved 3.2 m above the surface of a flat pool of water. When viewed from under the water, what is the magnification of the flag? Let the indices of refraction nwater = 1.33 and nair = 1.00.
1.33
0.754
1
1.67

Answers

Answer:

1.33

Explanation:

For an optical instrument, the magnification ratio of the apparent diameter of the image to that of the object.

Mathematically, from the given information;

Magnification[tex]= \dfrac{n_{water}}{n_{air}}[/tex]

where;

[tex]n_{water} =1.33\\ \\ n_{air} = 1.00[/tex]

[tex]= \dfrac{1.33}{1.00} \\ \\= \mathbf{1.33}[/tex]

(1) Expansion of concrete
A section of concrete which is 50 meters long experiences a temperature change from -10 Celsius to 46 degrees Celsius. What is the expansion of the concrete?
(2) Stainless steel
A rod of stainless steel (Austenitic) of mass 20 kg has 12057984 Joules of heat added to it. It’s initial temperature is 22 degrees Celsius. The original length is 1 meter.
a. What is the expansion of this rod?
b. Does it melt?
c. What is the final color?
(3) Mystery metal
A rod of some metal is measured to be .6 meters at room temperature (23 Celsius). It is then heated to 99 Celsius and then its length is measured to be .600664. Given the table of expansion coefficients below what type of metal is it? (all numbers in chart are multiplied by 10-6)

material expansion coefficient
silver 19
gold 14.2
indium 33
brass 18
bronze 17.5

Answers

Abcdefghijklmnopqurtuv

Which sentence in the passage can be used to conclude that Eris is a dwarf planet and not a planet?
Erls takes about 557 Earth years to orbit the Sun. It has a mean surface temperature of about 40 Kelvin. It has a nearly spherical shape. It has
several other objects in its orbit, though
few are as massive as itself. Eris is too far away and small to be clearly visible from the Earth. Scientists
used its moon, Dysnomla, to measure it Qris is believed to be slightly more massive than Pluto. However, both of them are smaller than Earth's
Moon. Eris orbits the Sun directly, it is not a satellite of another planet or dwarf planet.

Answers

I

think

Answer:

is.......

it has several other objects in its original, though few are as massive as itself........

Answer:

my teachers have always taught me that a dwarf planet cannot have other objects in its orbit seeing that the gravitational force will make it collide with the planet or push it out of the orbit. hope it helps xx

1pt The process by which rock minerals are changed by natural processes into new substances is known as:
O A. erosion.
O B. chemical weathering.
O C. sedimentation.
O D. mechanical weathering.

Answers

The answer is A because you have to have erosion

The process by which rock minerals are changed by natural processes into new substances is known as chemical weathering. Option A is correct.

What is weathering?

The breakdown or dissolution of rocks and minerals on the Earth's surface is referred to as weathering.

Weathering is the erosion or disintegration of rocks, building materials, etc., induced by chemical interactions dissolved in it rather than by mechanical processes.

Water, ice, acids, salts, plants, animals, and temperature variations are all weathering agents.

Chemical weathering is the process by which rock minerals are transformed into new compounds by natural processes.

Hence, option A is correct.

To learn more about weathering refer;

https://brainly.com/question/14426457

#SPJ2

When the electrons reach the collector, they flow towards the positivly charged grid. The resulting current is measured. Note that as the electrons accelerate from the cathode toward the grid, they collide with the mercury atoms. Assume that these collisions are completely elastic. How does the collected current vary if the ΔVgrid is slowly increased? View Available Hint(s) When the electrons reach the collector, they flow towards the positivly charged grid. The resulting current is measured. Note that as the electrons accelerate from the cathode toward the grid, they collide with the mercury atoms. Assume that these collisions are completely elastic. How does the collected current vary if the is slowly increased? The current increases. The current remains constant. The current decreases.

Answers

Answer:

the current INCREASES.

Explanation:

In this experiment, the electrons are generated by a filament with very low speed, when they are subjected to a difference and potential ΔV they acquire the necessary speed to reach the regulation and the current can be measured.

Some electrons collide elastically with the atoms of the mercury gas that is much heavier and are scattered in any direction, so they do not reach the grid, by increasing the voltage this scattered electrons can acquire the necessary speed in the direction of grid to reach it and therefore are also measured, increasing the current.

Therefore, as the power difference increases, the current INCREASES.

what is the wavelength of a wave with the frequency of 330 Hz and a speed of 343 m/s

Answers

Answer:

The wavelength of a wave with the frequency of 330hz and a speed of 343m/s would be 1.04m

Explanation:

You can get the wavelength of a wave by dividing the speed of the wave by its frequency, which in this case would be:

343/300, which as a decimal number, it'd be 1.04.

I hope I helped you, and a "Brainliest" is always appreciated! ☺

To obtain maximum Electromotive force (EMF), you should connect the batteries in

Answers

Answer:

Series

Cells in Series connection.In series, cells are joined end to end so that the same current flows through each cell. In case if the cells are connected in series the emf of the battery connected to the sum of the emf of the individual cell,If E is the overall emf of the battery combined with n number cells and E1, E2,......Em is the EMFs of individual cell.

Then   

E= E1+E2+...............+Em.

A radial saw has a blade with a 9-in. radius. Suppose that the blade spins at 1000 rpm. (a) Find the angular speed of the blade in rad/min. Incorrect: Your answer is incorrect. webMathematica generated answer key rad/min (b) Find the linear speed of the sawteeth in ft/s. Incorrect: Your answer is incorrect. webMathematica generated answer key ft/

Answers

Answer:

The angular speed of the blade is of 166.67 rad/min

If a radial saw has a blade with a 9-in. radius. Suppose that the blade spins at 1000 rpm then the angular speed of the blade would be 104.72 rad/seconds.

What is speed?

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

The mathematical expression for speed is given by

speed = total distance /Total time

As given in the problem If a radial saw has a blade with a 9-in. radius. Suppose that the blade spins at 1000 rpm then we have to find the angular speed of the blade,

the angular speed of the blade (ω) = 2πN/60

                                                          =2×π×1000/60

                                                          = 104.72 rad/seconds

Thus, the angular speed of the radial saw would be 104.72 rad/seconds

To learn more about speed from here,refer to the link;

https://brainly.com/question/7359669

#SPJ2

Wind power is considered a renewable energy source.
O True
O False

Answers

Answer:

True

Explanation:

Answer:

your answer is true hope this helps

A beaker is filled with water. A small plastic container contains a solid bar of aluminum, which has a mass of 40 g, and is placed on the water so that it floats. The water level reads 60 ml. Next, the bar of aluminum is taken out of the container and placed in the water so that it sinks to the bottom. By how much does the water level change?

Answers

Answer:

25.2 ml

Explanation:

When the aluminium block is inserted in the container, the overall amount of only the water in the beaker can equal V o.

The weight of the water expelled by the plastic container should be equal to the weight of the aluminium block, according to the buoyancy balance relation.

i.e.

[tex]\rho_w V_wg = m_{Al}g = \rho_{Al}V_{Al} g \\ \\ V_w = \dfrac{\rho_{Al}V_{AL}}{\rho_{w}}[/tex]

When the aluminium block is inserted into the plastic container, the initial volume of water = 60 ml

[tex]V_i = V_o + V_w[/tex]

[tex]V_i = V_o + \dfrac{\rho_{Al}V_{Al}}{\rho_{w}}---(1)[/tex]

When the aluminium block is placed outside the container, the volume of the water

[tex]V_f = V_o +V_{Al} ---(2)[/tex]

By subtracting equation (1) and (2)

[tex]V_i -V_f = V_o + \dfrac{\rho_{Al} V_{Al}}{\rho_w}- ( V_o + V_{Al}}) \\ \\ =\dfrac{\rho _{Al}V_{Al}}{\rho_w}-V_{Al} \\ \\ = V_{Al} \Big( \dfrac{\rho_{Al}}{\rho_{w}}-1 \Big)[/tex]

since;

[tex]m_{Al} = 40 g[/tex]

[tex]V _{Al} = \dfrac{40 \ g}{2.7 \ g/cm^3} \\ \\ V_{Al} = 14.815 \ cm^3[/tex]

Similarly;

[tex]\dfrac{\rho_{Al}}{\rho_{w}}= \dfrac{2.7 }{1.0}[/tex]

= 2.7

[tex]V_i -V_f =14.815\Big( 2.7-1 \Big) \\ \\ V_i -V_f = 25.1855 \ ml \\ \\ = \mathbf{25.2 \ ml}[/tex]

A ball is rolling away from you at a constant speed, hits a wall, and then suddenly stops moving. Imagine a position-versus-time graph showing the ball’s motion. Describe the line on the graph.

Answers

Answer:

It would show a "straight line".

Explanation:

Newton's First Law of Motion states that an object at rest will remain at rest and an object in motion will remain in motion (at a constant velocity) unless acted upon by an unbalanced force. Newton's first law of motion is also called the law of inertia.

After landing on an unfamiliar planet, a space explorer constructs a simple pendulum of length 54.0 cm. The explorer finds that the pendulum completes 98.0 full swing cycles in a time of 135s.

Required:
What is the value of g on this planet?

Answers

Answer:

g = 11.2 m/s²

Explanation:

First, we will calculate the time period of the pendulum:

[tex]T = \frac{t}{n}[/tex]

where,

T = Time period = ?

t = time taken = 135 s

n = no. of swings in given time = 98

Therefore,

[tex]T = \frac{135\ s}{98}[/tex]

T = 1.38 s

Now, we utilize the second formula for the time period of the simple pendulum, given as follows:

[tex]T = 2\pi \sqrt{\frac{l}{g}}[/tex]

where,

l = length of pendulum = 54 cm = 0.54 m

g = acceleration due to gravity on the planet = ?

Therefore,

[tex](1.38\ s)^2 = 4\pi^2(\frac{0.54\ m}{g} )\\\\g = \frac{4\pi^2(0.54\ m)}{(1.38\ s)^2}[/tex]

g = 11.2 m/s²

51.Shoveling snow can be extremely taxing because the arms have such a low efficiency in this activity. Suppose a person shoveling a footpath metabolizes food at the rate of 800 W. (a) What is her useful power output? (b) How long will it take her to lift 3000 kg of snow 1.20 m? (This could be the amount of heavy snow on 20 m of footpath.) (c) How much waste heat transfer in kilojoules will she generate in the process?

Answers

Complete question is;

Shoveling snow can be extremely taxing since the arms have such a low efficiency in this activity. Suppose a person shoveling a sidewalk metabolizes food at the rate of 800 W. (The efficiency of a person shoveling is 3%.)

(a) What is her useful power output? (b) How long will it take her to lift 3000 kg of snow 1.20 m? (This could be the amount of heavy snow on 20 m of footpath.) (c) How much waste heat transfer in kilojoules will she generate in the process?

Answer:

A) P_out = 24 W

B) t = 1470 s

C) Q = 1140.72 KJ

Explanation:

We are given;

Input Power; P_in = 800 W

Efficiency; η = 3% = 0.03

A) Formula for efficiency is;

η = P_out/P_in

Making P_out the subject, we have;

P_out = η•P_in

P_out = 0.03 × 800

P_out = 24 W

B) We know that;

Power = work done/time taken

Thus;

P_out = mgh/t

We are given;

m = 3000 kg

h = 1.20 m

Thus, time is;

t = (3000 × 9.8 × 1.2)/24

t = 1470 s

C) amount of heat wasted is calculated from;

Q = (P_in - P_out)t

Q = (800 - 24) × 1470

Q = 1,140,720 J

Q = 1140.72 KJ

Q1. Helmut rides 5km in 2h on his bike. His speed was *
a) 10km/h
b) 2.5km/h
c) 0.4km/h
d) 2.5km
Q2. A plane is travelling at 250km/h and must reach a target that is 3h 58min away. The distance to the target is. *
a) 1000km
b) 89500km
c) 62.5km
d) not enough information

Answers

Answer:

Speed of bike = 2.5 km/h

Distance travel = 1,000 km (Approx.)

Explanation:

Given:

Distance cover by Helmut = 5 km

Time taken = 2 hour

Find:

Speed of bike

Computation:

Speed = Distance / Time

Speed of bike = 5 / 2

Speed of bike = 2.5 km/h

Given:

Speed of plane = 250 km/h

time taken = 3 hr 58 min = 3.967 hr

Find:

Distance travel

Computation:

Distance = Speed x time

Distance travel = 250 x 3.967

Distance travel = 991.669

Distance travel = 1,000 km (Approx.)

The best leaper in the animal kingdom is the puma, which can jump to a height of 3.7m when leaving the ground at an angle of 45 degrees. with what speed must the animal leave the ground to reach that height?

Answers

Answer:

v = 12 m/s

Long, boring, and convoluted explanation:

First, let's lay out our information.

- max height = 3.7 m

- 0 = 45°

- gravitational acceleration constant = 9.8 [tex]\frac{m}{s^2}[/tex]

Since the puma leaves the ground at a 45 ° angle, its motion will follow a curved path as seen in many projectile motion problems, where the object is being influenced solely by the force of gravity. And because the puma leaves the ground at an angle, its initial velocity is broken down into its horizontal and vertical components. We were also told, though indirectly, that the max height is  3.7m  because the puma can reach up to that height. Gravity is always given to be 9.8 [tex]\frac{m}{s^2}[/tex]

Because we are dealing with maximum height and gravity, we have to use the vertical component of the velocity,  vsin ( θ ) , and not the horizontal component, vcos ( θ ) .

Given its max height, the acceleration due to gravity, and the angle, we can now solve for the speed at which the puma leaves the ground using the following equation: vsin ( θ )  = [tex]\sqrt{2hg}[/tex]

Where vsin ( θ )  is the vertical component of the initial velocity and h  and g are max height and gravitational acceleration constant respectively.

Plugin, rearrange and solve

v sin ( θ )  =  [tex]\sqrt{2hg}[/tex]

v sin ( 45 ∘ )  =   √ 2  ×  3.7  ×  9.8

v ( 0.71 )  =  [tex]\sqrt{72.52}[/tex]

v ( 0.71 )  =  8.52

v  =  8.52 /0.71

v =  12 m s


[tex]can \: you \: answer \: that[/tex]

Answers

Answer:

1. k

2. t

3. k

4. k

5. k

6. k

7. k

8. k

9. k

10. k

I'm not sure but hope it helps:)

Tawny notices that Jim has been forgetting to check two forms of
identification for new patients. How could she best communicate this
effectively to Jim in a way that avoids conflict?
A. "I forget this a lot, too, so I'm not blaming you or anything, but you
need to check two forms of identification."
B. "Did you forget your training? We always have to check two forms
of identification for each patient."
C. "We have to check two forms of identification, so stop forgetting
to do it."
D. "I think the proper procedure is to check two forms of
identification for each patient."

Answers

I think the answer is c but I’m not sure

Answer: D. "I think the proper procedure is to check two forms of

identification for each patient."

Explanation: took the quiz

do u ever think that how are u living cause we could not even be here and God but made us but had did it all started I believe in god btw I'm just saying how

Answers

Answer:

What is the question

Explanation:

lol

A compressed spring launches a block up an incline. Which objects should be included within the system in order to make an energy analysis as easy as possible

Answers

Answer:

Block, incline, spring and gravity.

Explanation:

For us to have an energy analysis involving gravitational and spring potential energy, we will need to have a block with specific mass that is held at rest on a frictionless incline plane. Now, the block will compress the spring by a specific length from its equilibrium position and then the block is released to travel a distance right up the slope.

So basically, we will need Block, incline, spring and then gravity for it to move.

How does Newton's first law affect human motions answer

Answers

The First Law states, "A body at rest will remain at rest, and a body in motion will remain in motion unless it is acted upon by an external force." This simply means that things cannot start, stop or change direction all by themselves. It requires some force acting on them from the outside to cause such a change. Hope this helps! Mark brainly please!

A trumpeter plays at a sound level of 75dB. three equally loud trumpet players join in. what is the new sound level?​

Answers

The answer is approx 87 decibels.

En una balanza de fábrica se determina la masa de un cuerpo y se obtiene
1 M kg  280
con
un error aparente
1 1 0,5  a
   M kg
. En un laboratorio, se hace lo mismo con otro cuerpo y
se determina
2 M g  23,545
con un error
2 2 0,001  a
   M g .
¿Dónde se cometió mayor erro

Answers

Kylie Kristen Jenner (born August 10, 1997)[3] is an American media personality, socialite, model, and businesswoman. She has starred in the E! reality television series Keeping Up with the Kardashians since 2007 and is the founder and owner of cosmetic company Kylie Cosmetics.

If a car travels 300 kilometers in 3 hours, its average speed is 100 km/hr.

O True
O False

Answers

Answer:

True

Explanation:

300/3=100km/hr

hope it helps. Plz mark me as brainliest.

Answer:

True

hope it helps u

thanks

why is it important to observe safety rules in food preservation?
pls help ​

Answers

Answer:

Yes it is important.

Explanation:

It is important because we should preserve our food with safety as we would take it in the next day so if we we will not take safety then many germs can enter in that food and if we eat that food we could get sick . If we keep the food uncovered so anything can happen like any insect can fall in the food and we didn't know it it or any germs can enter in the food that is very harmful for our body so so we should keep the food covered and well preserved.

Find the frequency and wavelength of the wave below, assuming it has a speed of 30 m/s

Answers

100m/s divided by 40 Hz (cycles)=2.5 meters per cycle

After the water has boiled, the temperature of the water decreases by 22 °C.
The mass of water in the kettle is 0.50 kg.
The specific heat capacity of water is 4200 J/kg °C.
Calculate the energy transferred to the surroundings from the
water.



Energy=

Answers

Explanation:

Use the formula:

[tex] e = mc \delta \theta[/tex]

e is the energy released,

m is the mass of water,

c is the specific heat capacity,

δθ is the change in temperature ( 100 - 22)


Write a paragraph descibing three rides in an amusement park and how rides cause you
to move.

Answers

Answer:

Hope this helps!  can I have brainliest im trying to level up.

Explanation:

Bumper cars are a great place to see Sir Isaac Newton’s three laws of motion in action. Here’s how:

Newton’s First Law: Every object in motion continues in motion and every object at rest continues to be at rest unless an outside force acts upon it.

This is because all objects have inertia – the property of matter that resists changes to the object’s motion.

Newton found that if a ball is sitting on a table, it will stay sitting there because that is what it ‘wants’ to do.

If the ball is set in motion, it will keep traveling in a straight path because, again, that is what it ‘wants’ to do.

An object in motion will not stop, slow down, or change its direction unless an outside force acts on it (such as gravity, friction, and air resistance).

When you are riding in a bumper car and end up in a collision with another bumper car, you feel a jolt. This is because your body’s inertia wants it to keep traveling in the direction it was moving with the car even though your bumper car has now suddenly stopped.

Newton’s Second Law: The greater the mass of an object, the harder it is to change its speed.

(More force is needed to move it.)

You already know this law and practice it in your everyday life. Something that is small, such as a pebble, is much easier to pick up and throw than something that is large and heavy, such as a boulder.

When riding in the bumper cars, you may have noticed that people who weigh less tend to get pushed around more than people who weigh more.

The more mass (weight) an object has, the more force it takes to move it.

And since all the bumper cars usually have the same top velocity, the cars carrying more mass will never travel as far as the cars carrying less mass after a collision.

Newton’s Third Law: For every action, there is an equal and opposite reaction.

If two bumper cars traveling at the same speed and carrying the same amount of weight run into each other, they will bounce off and move an equal distance away from each other.

And based on the second law, if there is a difference in the amount of weight being carried in the two cars, the car with less weight will travel farther away from the point of impact than the car carrying more weight.

Other Questions
Explain how a carbon atom from a CO2 molecule in the air can end up as a carbon atom in a protein in a plant cell in the experiment it is important to make measurements that are both precise and accurate which of these measurements of time is the most precise 5.1 second s5.14 second s5 second s. What does side DE equal?first person gets brainliestly answer! What is Frederick Fleet and Third Officer Pittmans relationship in titanic officer swears wreck due to company's neglect Misha used a probability simulator to pull 3 colored marbles from a bag and flip a coin 50 times. The results are shown in the tables below: Color of Marble Number of Times Rolled Blue 20 Green 18 Yellow 12 Heads Tails 28 22 Using Misha's simulation, what is the probability of pulling a blue marble and the coin landing tails up? (5 points) a 410 over 2500 b 440 over 2500 c 32 over 50 d 42 over 50 Carbon dioxide is a naturally occurring gas that is vital to plant and animal life, yet carbon dioxide emissions from burning of fossil fuels are expected to result in significant climate change within 100 years. Should carbon dioxide be considered to be a pollutant? Support your position by providing reasons why or why not. what is the first step to solve this equation: 11 - 3i = 44 What is the slope of the line that passes through the points (-5, 8) and (-11, 8) Strategy: Skimming Open ended Activity DUE April 26th 11:59 PM Instructions Learn how to skim a document for its general meaning. Questions Skimming Skimming involves quickly reading through a document to absorb its general meaning. This allows you to understand the main ideas without having to read word for word. When you skim a text, you might want to look at its title and subtitles. You might also want to read the first sentence of each paragraph. Now skim the reading selection to understand its general meaning. Jot down your impressions. What new information did you learn about the document by skimming it No link need right answer 100 points When graphing c=12, would you use an closed circle or opened circle? aWhat was the painting above designed to speak to?A.factb. feelingc. logicd. reasonPlease select the best answer from the choices providedABOOOO If you have a car that gets 30 miles to the gallon and fuel currently costs $2.60 a gallon, how many miles can you drive if you have 5$ worth of fuel? I chose this theme because (Why is it important to the novel? What is the author saying about this theme? What makes it interesting? How does it relate to me or the world?) about Indian Horse Sauls Marcie conducts an experiment with a bag of marbles. She draws one marble from the bag, records its color, returns the marble to the bag, and draws again. The results of her experiment are shown below.Marble Color Number ofTimes Drawnred 5blue 6green 4purple 1yellow 4Based on Marcies experiment, what proportion of the marbles in the bag would she expect to be purple?A. 20%B. 5%C. 1%D. 10% effects of ethnic conflicts to the development of africa How do genes code for traits You roll a fair 666-sided die.What is P(roll greater than 4)P(roll greater than 4)start text, P, left parenthesis, r, o, l, l, space, g, r, e, a, t, e, r, space, t, h, a, n, space, 4, end text, right parenthesis?If necessary, round your answer to 222 decimal places. How can the motion of an object best be described? help I have already published it 3 times and nobody helps me, could someone help me and explain how to do it? Thank you