state the most specific name of these quadrilateral...50 points​

The mean of the sample is 5, 3, 5, 12, 3, 2 the coefficient of variation is 91%. Option A is the correct answer.

To calculate the coefficient of variation, first, we need to calculate the standard deviation and mean of the sample.

The mean of the sample is (3 + 5 + 12 + 3 + 2)/5 = 5.

To find the standard deviation, we first need to calculate the variance. The variance can be found by taking the sum of the squared differences between each data point and the mean, dividing by the sample size minus one, and then taking the square root.

The variance is ((3-5)² + (5-5)² + (12-5)² + (3-5)² + (2-5)²)/4 = 20.5.

The standard deviation is the square root of the variance, which is approximately 4.53.

Finally, we can calculate the coefficient of variation by dividing the standard deviation by the mean and multiplying by 100%.

Coefficient of variation = (4.53/5) x 100% = 90.6%.

Learn more about the coefficient of variation at

https://brainly.com/question/13293164

#SPJ4

The question is -

A researcher has collected the following sample data. The mean of the sample is 5, 3, 5, 12, 3, 2 the coefficient of variation is?

a. 91%

b. 72.66%

c. 330%

d. 264%

To find the mean height of a football player on this Florida team, we need to know the mean of the normal distribution (Morlam) and the standard deviation of the Florida distribution. Since the Florida distribution is also approximately normal (Morlam) with a standard deviation of 2.9 inches, we can use the Empirical Rule to estimate the mean height.

According to the Empirical Rule, approximately 68% of the data falls within one standard deviation of the mean, approximately 95% within two standard deviations, and approximately 99.7% within three standard deviations. Since we know that the standard deviation of the Florida distribution is 2.9 inches, we can assume that the mean height falls within three standard deviations of the mean.

So, if we assume that the mean height is at the centre of the distribution, we can estimate it by adding and subtracting three standard deviations from it. Therefore, the mean height of a football player on this Florida team can be estimated to be:

Mean height = Mean of the Morlam distribution ± 3 x Standard deviation of the Florida distribution
Mean height = Mean of the Morlam distribution ± 3 x 2.9 inches

Without knowing the mean of the Morlam distribution, we cannot calculate the exact mean height. However, if we assume that the Morlam distribution has a mean height of 70 inches (a typical average height for a football player), then the mean height of a football player on this Florida team can be estimated to be:

Mean height = 70 ± 3 x 2.9
Mean height = 70 ± 8.7
Mean height = 61.3 to 78.7 inches

Therefore, we can estimate that the mean height of a football player on this Florida team is between 61.3 and 78.7 inches.

Learn more about Normal Distribution here: brainly.com/question/17199694

#SPJ11

We can estimate that the mean height of a football player on the Florida team is approximately 70 inches.

To find the mean height of a football player on the Florida team, we need to know the exact distribution of heights. However, since we only have information about the standard deviation and the fact that it is approximately normal, we can make an educated guess that the distribution is still normal with a mean somewhere close to the national average of 70 inches.
Using the empirical rule, we know that about 68% of the data falls within one standard deviation of the mean. In this case, one standard deviation is 2.9 inches.

So, we can assume that about 68% of the heights on the Florida team fall between (70-2.9) = 67.1 inches and (70+2.9) = 72.9 inches.
If we assume that the distribution is symmetric, we can estimate the mean height of the Florida team by taking the average of the lower and upper bounds of the interval: (67.1 + 72.9)/2 = 70 inches.

For similar question on mean.

https://brainly.com/question/23251787

#SPJ11

Answer: 102 miles.

Step-by-step explanation:

You divide 17 by 5 and then multiply by 30.

The probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

To find the probability that a randomly selected carton has a puncture or a smashed corner, we can use the formula:

P(puncture or smashed corner) = P(puncture) + P(smashed corner) - P(puncture and smashed corner)

where P(puncture) is the probability of a carton having a puncture, P(smashed corner) is the probability of a carton having a smashed corner, and P(puncture and smashed corner) is the probability of a carton having both a puncture and a smashed corner.

Substituting the given probabilities into the formula, we get:

P(puncture or smashed corner) = 0.03 + 0.06 - 0.014

P(puncture or smashed corner) = 0.076

Therefore, the probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer:

225 trains

Step-by-step explanation:

since they are using the same process and materials, we expect them to have the same ratio between trains made and defective trains :

600 / 30 = 20/1

one out of 20 is defect.

so, when they make 4500 trains, we need to divide this by 20 to get the number of expected defective trains :

4500 / 20 = 225

I find the answer option of 6000 defective trains really funny : if that were true, more than the produced trains (4500) would be defective. how ... ?

The substance's half-life in days is 3 days.

What is exponential decay?

If a quantity declines at a pace proportionate to its current value, exponential decay may be present. The term "exponential decay" in mathematics refers to the process of a constant percentage rate reduction in an amount over time.

Here, we have

Given: An 18-gram sample of a substance that's a by-product of fireworks has a k-value of 0.215.

We have to find the substance's half-life in days.

Using the formula for the exponential decay that is N = N₀e⁻ⁿˣ,

we have N = 18/2, N₀ = 18, and n = 0.215.

N = N₀e⁻ⁿˣ

9 = 18e⁻⁰°²¹⁵ˣ

9/18 = e⁻⁰°²¹⁵ˣ

1/2 = e⁻⁰°²¹⁵ˣ

Taking logs on both sides, we get

㏑(1/2) = -0.215x

x = ㏑(1/2)/(-0.215)

x = -0.6931/(-0.215)

x = 3.22

Hence, the substance's half-life in days is 3 days.

To learn more about the exponential decay from the given link

https://brainly.com/question/31409569

#SPJ1

The expressions that correctly show the value of the electronic book device after the holiday are B and D, which represent the percentage decrease of 15% as 0.85 (or 1-0.15).

The value of an electronic book device before a holiday is represented by the variable t. After the holiday, the value of the device decreased by 15%. To find the value of the device after the holiday, we need to multiply the original value by the percentage decrease, which is 0.85 (or 1-0.15). Therefore, the expressions that correctly show the value of the electronic book device after the holiday are B and D.

Option A (1.15) represents the percentage increase and not the decrease, so it is incorrect. Option C (-0.15) represents the percentage decrease, but it cannot be used alone to find the new value. Option E (-0.85) is the negative of the percentage decrease, so it is also incorrect. Finally, option F is equivalent to option D, so it is also correct.

In summary, the expressions that correctly show the value of the electronic book device after the holiday are B and D, which represent the percentage decrease of 15% as 0.85 (or 1-0.15).

to know more about electronic

brainly.com/question/1255220

#SPJ1

The length of v, to the nearest 10th of a centimeter is 2.2.

To find the length of side v in triangle UVW, we can use the law of sines, which states that the ratio of the length of a side of a triangle to the sine of the angle opposite that side is the same for all sides and angles in the triangle.

Using this formula, we have,

v/sin(m∠V) = w/sin(m∠W)

We know that w = 1.4 cm and m∠W = 63°. To find sin(m∠W), we can use a calculator,

sin(63°) ≈ 0.89

Substituting the values we know into the formula, we get,

v/sin(m∠V) = 1.4/0.89

To solve for v, we need to find sin(m∠V). We know that the sum of the angles in a triangle is 180°, so we can find m∠V by subtracting the measures of the other two angles from 180°,

m∠V = 180° - m∠U - m∠W

m∠V = 180° - 29° - 63°

m∠V = 88°

Now, we can substitute the value of sin(m∠V) into the equation and solve for v,

v/ sin(88°) = 1.4/0.89

v ≈ 2.2 cm

Therefore, the length of side v in triangle UVW is approximately 2.2 cm to the nearest tenth of a centimeter.

To learn more about length here:

https://brainly.com/question/16537545

#SPJ4

Answer:

1.6

Step-by-step explanation: This is answer on DeltaMath

Answer:

Step-by-step explanation:

Medium is 28

Mean is 29

Range is 11

Midrange is 29.5

In the given triangle, α is equal to 67.36°.

What is a triangle's definition?

A triangle is a two-dimensional closed geometric form that has three sides, three angles, and three vertices (corners). It is the most basic polygon, produced by joining any three non-collinear points in a plane. The sum all angles of a triangle is always 180°. Triangles are classed according to their side length (equilateral, isosceles, or scalene) and angle measurement (acute, right, or obtuse).

Now,

Using Trigonometric functions

We can use the sine function

So,

Sin α=Perpendicular/Hypotenuse

Sin α = 12/13

α=67.36°

Hence,

           The value of α will be 67.36°.

To know more about triangles visit the link

brainly.com/question/2773823

#SPJ1

The position of the image is approximately 1.71 cm from the ornament's surface.

To determine the position of the image, we need to use the mirror formula for a concave mirror, which is \frac{1}{f} = [tex]\frac{1}{do} + \frac{1}{di},[/tex] where f is the focal length, do is the object distance, and di is the image distance.

First, we need to find the focal length (f) of the spherical ornament. The radius of curvature (R) is half the diameter, so R = 6.00 cm / 2 = 3.00 cm. For a spherical mirror, the focal length is half the radius of curvature: f = R/2 = 3.00 cm / 2 = 1.50 cm.

Next, we need to find the object distance (do). The object is 19.0 cm from the center of the ornament, but we need the distance from the ornament's surface. Since the radius is 3.00 cm, we subtract that from the total distance: do = 19.0 cm - 3.00 cm = 16.0 cm.

Now, we can use the mirror formula:
\frac{1}{f} = [tex]\frac{1}{do} + \frac{1}{di},[/tex]
1/1.50 cm = 1/16.0 cm + 1/di

To solve for di, subtract 1/16.0 cm from both sides and then take the reciprocal:

1/di = 1/1.50 cm - 1/16.0 cm

di ≈ 1.71 cm

The position of the image is approximately 1.71 cm from the ornament's surface.

learn more about the mirror formula for a concave mirror,

https://brainly.com/question/3555871

#SPJ11

The position of the image is 20.8 cm from the center of the spherical ornament, counting from the ornament surface.

To find the position of the image, we can use the mirror equation:

1/o + 1/i = 1/f

where o is the object distance from the center of the spherical ornament, i is the image distance from the center of the spherical ornament, and f is the focal length of the ornament.

Since the ornament is a spherical mirror, the focal length is half the

radius of curvature, which is half the diameter of the ornament:

f = R/2 = 6.00 cm/2 = 3.00 cm

Substituting the given values, we get:

1/19.0 cm + 1/i = 1/3.00 cm

Solving for i, we get:

1/i = 1/3.00 cm - 1/19.0 cm = (19.0 cm - 3.00 cm)/(3.00 cm x 19.0 cm) = 0.0481 cm^-1

i = 1/0.0481 cm = 20.8 cm

Therefore, the position of the image is 20.8 cm from the center of the

spherical ornament, counting from the ornament surface.

for such more question on ornament surface

https://brainly.com/question/30938695

#SPJ11

The impact propensity can be interpreted as the slope coefficient for the tax personal exemption (pe) or its first lag in

the regression equation.

To determine the impact propensity in the regression of the general fertility rate (GFR) on the tax personal exemption

(PE) and its first lag, you should follow these steps:

Estimate the regression model using the available data. The model should look like this:

GFR = β0 + β1 × PE + β2 × PE_lag + ε

Where GFR is the general fertility rate, PE is the tax personal exemption, PE_lag is the tax personal exemption's first

lag, and ε is the error term.

Obtain the estimated coefficients (β0, β1, and β2) from the fitted regression model.

These coefficients will help you determine the impact propensity.

Calculate the impact propensity. The impact propensity in this context refers to the change in the general fertility rate

resulting from a one-unit increase in the tax personal exemption, taking into account both its current and lagged

effects.

To find the impact propensity, sum the coefficients for the tax personal exemption and its first lag:

Impact propensity = β1 + β2

for such more question on propensity

https://brainly.com/question/20376297

#SPJ11

The slope of the second line is also positive, as it is parallel to the first line which has a positive slope.

Slope is a measure of how steep a line is, and is defined as the ratio of the change in the y-coordinate (vertical change) to the change in the x-coordinate (horizontal change) between any two points on the line. It represents the rate at which the line is rising or falling as it moves from left to right. Slope can be positive, negative, or zero. A positive slope indicates that the line is increasing as it moves from left to right, a negative slope indicates that the line is decreasing as it moves from left to right, and a zero slope indicates that the line is horizontal.

Here,

When two lines are parallel, they have the same slope. In this case, the first line has a positive slope of "a," which means that it is increasing as it moves from left to right. Since the second line is parallel to the first line, it will also have the same slope as the first line. Therefore, the slope of the second line will also be positive, indicating that it is increasing as it moves from left to right.

To know more about slope,

brainly.com/question/30088055

#SPJ1

The expected winning is $2.

To calculate the expected winning, we need to find the probability of each outcome and multiply it by the amount we will win in that outcome.

There are 2 possible outcomes for each coin flip: heads or tails. Therefore, there are 2x2x2=8 possible outcomes for flipping a coin three times.

Here are all the possible outcomes with the number of heads in each outcome:

The probability of each outcome can be calculated using the formula: probability = (number of favorable outcomes) / (total number of possible outcomes)

For example, the probability of getting 3 heads (HHH) is 1/8 because there is only one favorable outcome out of 8 possible outcomes.

Using this formula, we can calculate the probability and expected winning for each outcome:

To calculate the overall expected winning, we need to add up the expected winning for each outcome multiplied by its probability:

(1/8) x $6 + (1/4) x $4 + (1/4) x $4 + (1/4) x $4 + (3/8) x $2 + (3/8) x $2 + (3/8) x $2 + (1/8) x $0 = $2

Therefore, the expected winning is $2.

Learn more about probability

https://brainly.com/question/24756209

#SPJ4

On simplifying the expression (−1 3/4)²- √ [127−2(3)]  we get -127/16

Simplifying an expression:

To simplify the expression, we need to follow the order of operations, which is PEMDAS: Parentheses, Exponents, Multiplication and Division (from left to right), and Addition and Subtraction (from left to right).

First, we simplify the exponent by squaring -1 3/4 to get 49/16. Then, we simplify the expression under the square root by subtracting 2 times 3 from 127 to get 121, and we take the square root of 121 to get 11.

Here we have

(−1 3/4)²- √ [127−2(3)]  

The above expression can be simplified as follows

=>  (−1 3/4)²- √ [127−2(3)]    

Convert the mixed fraction into an improper fraction  

=> 1 3/4 = 7/4    [ ∵ 4 × 1 + 3 = 7 ]  

So given expression can be

=>  (−7/4)²- √ [127−2(3)]      

=>  (49/16) - √ [121]      

=>  (49/16) - 11

=>  (49 - 176 /16)

=>  -127/16  

Therefore,

On simplifying the expression (−1 3/4)²- √ [127−2(3)]  we get -127/16

Learn more about Expression at

https://brainly.com/question/30148250

#SPJ1

Answer:  the solution for y in terms of x is y = (-1/4)x - 8.

Step-by-step explanation: In order to obtain a solution for y in the given equation of 4y = -x - 32, it is imperative to achieve the isolation of y on a singular side of the equation. To accomplish this task, it is possible to perform division on both sides of the equation by a factor of 4:

The given equation 4y/4 = (-x - 32)/4 can be expressed in an academic manner as follows: The given equation reveals that the quotient of 4y divided by 4 is equivalent to the quotient of the opposite of x added to negative 32, also divided by 4.

Upon performing simplification, the expression on the right-hand side yields:

The equation y = (-1/4)x - 8 can be expressed in an academic manner as follows: The dependent variable y is equivalent to the product of the constant (-1/4) and the independent variable x, with an additional decrement of eight.

To find the equation for the line of best fit, we can use linear regression. Based on the given data:

x: 2, 5, 7, 12, 16

y: 9, 10, 5, 3, 2

The equation for the line of best fit would be in the form: y = mx + b, where m is the slope and b is the y-intercept.

Using a calculator or statistical software, we can calculate the slope and y-intercept for the line of best fit.

The result is:

Slope (m): -0.580 (rounded to three decimal places) Y-intercept (b): 10.671 (rounded to three decimal places)

So, the correct answer is:

A. y = -0.580x + 10.671

Answer:

Step-by-step explanation:

Answer:

To find the density of the brick, we need to divide its mass by its volume:

density = mass / volume

Plugging in the values given in the problem, we get:

density = 2,022.75 g / 1,064.5 cm³

Simplifying the division, we get:

density = 1.8996 g/cm³

Rounding to the nearest tenth, we get:

density ≈ 1.9 g/cm³

Therefore, the density of the brick is approximately 1.9 grams per cubic centimeter (g/cm³).

Answer:

x > 12

Step-by-step explanation:

3x + 18 > 54

Answer:

Step-by-step explanation:

it is -2

Answer: -2

Step-by-step explanation:

So this is asking for the cube root of -8.

This is the same as asking what is multiplied by itself 3 times to get -8.

-2 * -2 *-2 = -8

You can also use a calculator.

Another way to solve it is to write -8^(1/3).

Hope this helps!!!

The range of f include the following: D. -5 ≤ f(x) ≤ 5.

In Mathematics and Geometry, a domain is the set of all real numbers for which a particular function is defined.

Additionally, the vertical extent of any graph of a function represents all range values and they are always read and written from smaller to larger numerical values, and from the bottom of the graph to the top.

By critically observing the graph shown in the image attached above, we can reasonably and logically deduce the following domain and range:

Domain = {-6, 5} or -6 ≤ x ≤ 5.

Range = {-5, 5} or -5 ≤ f(x) ≤ 5.

Read more on domain here: brainly.com/question/17440903

#SPJ1

The angle formed by this intersection point and the corresponding point on LMNO is congruent to ZH.

In this case, we have two figures, LMNO and HIJK, and we know that LMNO is a reflection of HIJK. This means that there is an axis of reflection that maps HIJK onto LMNO.

When a shape is reflected across a line of symmetry, its angles are preserved. That is, if two angles in the original shape are congruent, then their images in the reflected shape are also congruent.

In this case, ZH is an angle in HIJK, and we want to find the angle in LMNO that corresponds to it. To do this, we need to find the line of symmetry that maps HIJK onto LMNO.

Once we have identified this line, we can draw the perpendicular bisector of ZH and find where it intersects the line of symmetry. The angle formed by this intersection point and the corresponding point on LMNO is congruent to ZH.

To know more about reflection here

https://brainly.com/question/30270479

#SPJ4

16.) Mean average deviation= option C

17.) Range of a data set = option E.

18.) First quartile = opinion AB

19.) Second quartile = option B

20.) Third quartile = option A

21.) Interquartile range = option D

To determine the measures of the spread is to match their various definitions to the correct measures given such as follows:

16.) Mean average deviation: The average deviation of data from the mean.

17.) Range of a data set : The difference between the highest value and the lowest value in a numerical data set.

18.) First quartile: The median in the lower half.

19.) Second quartile: The median value in a data set.

20.) Third quartile: The median in the upper half.

21.) Interquartile range: The distance between the first and the third quartile.

Learn more about range here:

https://brainly.com/question/26098895

#SPJ1

The power series method can be used to solve a nonhomogeneous differential equation about an ordinary point by finding both a homogeneous and particular solution using a series expansion and the method of undetermined coefficients.

The power series method is a technique used to find a series solution of a differential equation. When applied to a nonhomogeneous differential equation, the method involves finding both a homogeneous solution and a particular solution.

Assuming that the nonhomogeneous differential equation has the form

y''(x) + p(x)y'(x) + q(x)y(x) = f(x)

where p(x), q(x), and f(x) are functions of x, we can begin by finding the solution to the associated homogeneous equation

y''(x) + p(x)y'(x) + q(x)y(x) = 0

Using the power series method, we can assume a solution of the form:

y(x) = a0 + a1(x - x0) + a2(x - x0)^2 + ...

where a0, a1, a2, ... are constants to be determined, and x0 is the ordinary point of the differential equation.

Next, we can find the coefficients of the power series by substituting the series solution into the differential equation and equating coefficients of like powers of (x-x0). This leads to a system of equations for the coefficients, which can be solved iteratively.

After finding the homogeneous solution, we can find a particular solution using a similar method. Assuming a particular solution of the form:

y(x) = u(x) + v(x)

where u(x) is a solution to the associated homogeneous equation, and v(x) is a particular solution to the nonhomogeneous equation, we can use the method of undetermined coefficients to find v(x). This involves assuming a form for v(x) based on the form of f(x), and then solving for its coefficients using the same technique as before.

Once we have found both the homogeneous and particular solutions, we can combine them to obtain the general solution to the nonhomogeneous differential equation.

Learn more about nonhomogeneous differential equation here

brainly.com/question/30876746

#SPJ4

The inequality is simplified as 0 ≤ x ≤ 4

In mathematics, inequality refers to a mathematical expression that indicates that two values or quantities are unequal. An inequality is represented by the symbols "<" (less than), ">" (greater than), "≤" (less than or equal to), or "≥" (greater than or equal to).

For example, the inequality "x > 5" means that the value of x is greater than 5, and the inequality "y ≤ 10" means that the value of y is less than or equal to 10.

To graph the conjunction, we first need to solve for x:

-4 ≤ x - 4 ≤ 0

Add 4 to all parts of the inequality:

0 ≤ x ≤ 4

Image of graph is attached below.

To know more about conjunction, visit:

https://brainly.com/question/28839904

#SPJ1

The values of x and y of a curved ladder in feet given by the equation y=-1/20x^2+x are as follows in tabular form,

Values of x (in feet)                               Values of y (in feet)

0                                                               0

5                                                               3.75

10                                                              5

15                                                              3.75

20                                                             0

A curved ladder that children can climb on is modeled by the system of equations as,

y=-(1/20)x^2+x

where, x and y are measured in feet.

Putting x= 0 in the above equation y=-(1/20)x^2+x , we get,

y = - (1/20) (0^2) + (0) = 0

Putting x= 5 in the above equation y=-(1/20)x^2+x , we get,

y= - (1/20)(5^2)+(5) =  -5/4 + 5 = 15/4 = 3.75

Putting x= 10 in the above equation y=-(1/20)x^2+x , we get,

y= - (1/20)(10^2)+(10) =-5 +10 = 5

Putting x= 15 in the above equation y=-(1/20)x^2+x , we get,

y= - (1/20)(15^2)+(15)  = -45/4 +15= 3.75

Putting x= 20 in the above equation y=-(1/20)x^2+x , we get,

y= - (1/20)(20^2)+(20)  = -20 +20 = 0

Hence, when x= 0 feet, y = 0 feet ; x= 5 feet, y = 3.75 feet ; x = 10 feet, y = 5 feet ; x =15 feet , y =03.75 feet ;and x = 20feet, y = 0 feet from the solving the given equation.

To know more about putting values in system of equations here

https://brainly.com/question/3212871

#SPJ4

To determine the percent success, divide the actual score by the theoretical score, and then multiply the result by 100 to convert the value to a percentage.

We define the actual score, theoretical score, and explain how to calculate the percent success on an exam.
Actual score:

The actual score refers to the number of points a student has earned on an exam.

It represents the student's performance on the test, taking into account the correct and incorrect answers.
Theoretical score:

The theoretical score is the maximum number of points a student can earn on an exam.

This represents a perfect performance, where the student answers all questions correctly.
Calculating percent success:

To determine the percent success, divide the actual score by the theoretical score, and then multiply the result by 100 to convert the value to a percentage.
a. Divide the actual score by the theoretical score: (actual score) / (theoretical score)
b. Multiply the result by 100: (result from step a) * 100
c. The final value is the percent success.

For example, if a student has an actual score of 80 and the theoretical score is 100, the percent success would be calculated as follows:
a. 80 / 100 = 0.8
b. 0.8 * 100 = 80
c. The percent success is 80%.

For similar question on score.

https://brainly.com/question/29969863

#SPJ11

The total surface area of the given figure is 619.2 in², which is not listed in the provided options.

The surface area is known to be measure of the total area occupied by the surface of the object. Defining the surface area mathematically in the presence of a curved surface is better than defining the arc length of a one-dimensional curve, or the surface area of ​​a polyhedron (i.e. an object with flat polygonal faces). Much more complicated. For a smooth surface sphere such as the following, surface area is assigned using representation as a parametric surface. This surface definition is based on calculus and includes partial derivatives and double integrals.

The triangular face of the given figure represent an equilateral triangle of sides 12 in.

Area of the triangle = (√3/4) × a²

Area of the triangular face:

= (√3/4) × 12²

= (√3/4) × 144

= 57.6 in²

Area of the rectangle = Length × width

Area of the rectangular face:

= 12 × 14

= 168 in²

Area of the given figure:

= (2 × 57.6) + (3 × 168)

= 115.2 + 504

= 619.2 in²

To know more about polygonal faces, visit:

https://brainly.com/question/16550007

#SPJ1